Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Error on some hosts #55

Open
ChristianMoritz opened this issue Apr 9, 2019 · 4 comments
Open

Error on some hosts #55

ChristianMoritz opened this issue Apr 9, 2019 · 4 comments

Comments

@ChristianMoritz
Copy link

on some dell host's ive got the following error...

Plugin-Ausgabe
PS
--PS 1: OK, Volt I/O: 264 V/228.0 V, Current: 0.8 A, Watt I/O: 900.0 W/750.0 W
--PS 2: OK, Volt I/O: 264 V/228.0 V, Current: 0.2 A, Watt I/O: 900.0 W/750.0 W
FAN
--System Board Fan1: 4560 RPM - ENABLED/OK
--System Board Fan2: 4680 RPM - ENABLED/OK
--System Board Fan3: 4680 RPM - ENABLED/OK
--System Board Fan4: 4560 RPM - ENABLED/OK
--System Board Fan5: 4560 RPM - ENABLED/OK
--System Board Fan6: 4440 RPM - ENABLED/OK
BATTERY
--System Board CMOS Battery: ENABLED/OK [PRESENCEDETECTED]
--PERC1 ROMB Battery: ENABLED/OK [PRESENCEDETECTED]
--PERC2 ROMB Battery: ENABLED/OK [0]
PU
--PU 1: ENABLED/OK, RedundancyStatus: FULL, SystemBoard Pwr Consumption: 196 W
MEM
--Memory 1 (DIMM Socket A1) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 2 (DIMM Socket A2) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 3 (DIMM Socket A3) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 4 (DIMM Socket A4) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 5 (DIMM Socket A5) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 6 (DIMM Socket B1) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 7 (DIMM Socket B2) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 8 (DIMM Socket B3) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 9 (DIMM Socket B4) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 10 (DIMM Socket B5) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 11 (DIMM Socket A7) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 12 (DIMM Socket A8) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 13 (DIMM Socket B7) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
--Memory 14 (DIMM Socket B8) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: YYYYYYYYYYYY]
VDISK
--VDisk 1 (): OK/ONLINE, RAID-1 (136.13 GB), BadBlock: 0 [Virtual Disk 0 on Integrated RAID Controller 1]
DISK
--PDisk 1 (0:1:0) 136.13 GB: ONLINE, PowerStat: SPUNUP, HotSpare: no [TOSHIBA, S/N: YYYYYYYYYYYY]
--PDisk 2 (0:1:1) 136.13 GB: ONLINE, PowerStat: SPUNUP, HotSpare: no [TOSHIBA, S/N: YYYYYYYYYYYY]
Traceback (most recent call last):
File "/usr/lib/nagios/plugins/check_dell_idrac.py", line 885, in
result, tmp_code = PARSER(host, hw_info, hw_order, hw_no_alert, hw_mib, perf).main()
File "/usr/lib/nagios/plugins/check_dell_idrac.py", line 718, in main
else: hw_3 = round(float(hw[3])/10, 1)
ValueError: could not convert string to float: "CPU1 TEMP"

on 1 other host ive got a timeout.... (like this)

PS
--PS 1: OK, Volt I/O: 264 V/(N/A) V, Current: 0.2 A, Watt I/O: 900.0 W/750.0 W
--PS 2: OK, Volt I/O: 264 V/(N/A) V, Current: 21.0 A, Watt I/O: 900.0 W/750.0 W
FAN
--System Board Fan1: 3000 RPM - ENABLED/OK
--System Board Fan2: 2880 RPM - ENABLED/OK
--System Board Fan3: 3000 RPM - ENABLED/OK
--System Board Fan4: 2880 RPM - ENABLED/OK
--System Board Fan5: 3000 RPM - ENABLED/OK
--System Board Fan6: 3000 RPM - ENABLED/OK
BATTERY
--System Board CMOS Battery: ENABLED/OK [PRESENCEDETECTED]
PU
--PU 1: ENABLED/OK, RedundancyStatus: FULL, SystemBoard Pwr Consumption: 210 W
MEM
--Memory 1 (DIMM Socket A1) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 2 (DIMM Socket A2) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 3 (DIMM Socket A3) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 4 (DIMM Socket A4) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 5 (DIMM Socket A5) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 6 (DIMM Socket A6) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 7 (DIMM Socket A7) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 8 (DIMM Socket A8) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 9 (DIMM Socket B1) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 10 (DIMM Socket B2) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 11 (DIMM Socket B3) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 12 (DIMM Socket B4) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 13 (DIMM Socket B5) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 14 (DIMM Socket B6) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 15 (DIMM Socket B7) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
--Memory 16 (DIMM Socket B8) 32.0 GB/2400 MHz: ENABLED/OK [26, Samsung, S/N: YYYYYYYYYYYY]
VDISK
--VDisk 1 (Volume0): OK/ONLINE, RAID-1 (185.75 GB), BadBlock: 0 [Virtual Disk 0 on Integrated RAID Controller 1]
DISK
--PDisk 1 (0:1:0) 185.75 GB: ONLINE, PowerStat: ON, HotSpare: no [ATA, S/N: YYYYYYYYYYYY]
--PDisk 2 (0:1:1) 185.75 GB: ONLINE, PowerStat: ON, HotSpare: no [ATA, S/N: YYYYYYYYYYYY]
SNMP Timeout!
@eeshlomi
Copy link

I have applied a bugfix for that. Check-out my pull request or the whole fork in my repos.

@ChristianMoritz
Copy link
Author

ChristianMoritz commented Jul 19, 2019 •
edited
Loading

I have applied a bugfix for that. Check-out my pull request or the whole fork in my repos.

with your tool fork ive got the following error at the end...

root@smon03:/usr/lib/nagios/plugins/idrac# ./idrac_2.2rc4 -H 1.1.1.9 -v2c -c SnmPv2c-T3st
PS
--PS 1: OK, Volt I/O: 264 V/228 V, Current: 0.8 A, Watt I/O: 900.0 W/750 W
--PS 2: OK, Volt I/O: 264 V/228 V, Current: 0.2 A, Watt I/O: 900.0 W/750 W
DISK
--PDisk 1 (0:1:0) 136.13 GB: ONLINE, PowerStat: SPUNUP, HotSpare: no [TOSHIBA, HDD, S/N: XXXXXXX] isFailing: 0
--PDisk 2 (0:1:1) 136.13 GB: ONLINE, PowerStat: SPUNUP, HotSpare: no [TOSHIBA, HDD, S/N: XXXXXXX] isFailing: 0
FAN
--System Board Fan2: 4680 RPM - ENABLED/OK
--System Board Fan3: 4680 RPM - ENABLED/OK
--System Board Fan4: 4560 RPM - ENABLED/OK
--System Board Fan5: 4560 RPM - ENABLED/OK
--System Board Fan6: 4440 RPM - ENABLED/OK
--System Board Fan1: 4560 RPM - ENABLED/OK
BATTERY
--System Board CMOS Battery: ENABLED/OK [PRESENCEDETECTED]
--PERC1 ROMB Battery: ENABLED/OK [PRESENCEDETECTED]
--PERC2 ROMB Battery: ENABLED/OK [0]
PU
--PU 1: ENABLED/OK, RedundancyStatus: FULL, SystemBoard Pwr Consumption: 196 W
MEM
--Memory 1 (DIMM Socket A1) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 2 (DIMM Socket A2) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 3 (DIMM Socket A3) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 4 (DIMM Socket A4) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 5 (DIMM Socket A5) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 6 (DIMM Socket B1) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 7 (DIMM Socket B2) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 8 (DIMM Socket B3) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 9 (DIMM Socket B4) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 10 (DIMM Socket B5) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 11 (DIMM Socket A7) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 12 (DIMM Socket A8) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 13 (DIMM Socket B7) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
--Memory 14 (DIMM Socket B8) 32.0 GB/1333 MHz: ENABLED/OK [DDR3, Samsung, S/N: XXXXXXX]
VDISK
--VDisk 1 (): OK/ONLINE, RAID-1 (136.13 GB), BadBlock: 0 [Virtual Disk 0 on Integrated RAID Controller 1]
Traceback (most recent call last):
File "./idrac_2.2rc4", line 861, in
result, tmp_code = PARSER().main()
File "./idrac_2.2rc4", line 648, in main
hw_dict = self.classifier(snmp_data, hw_dict) # classify data
File "./idrac_2.2rc4", line 417, in classifier
item_order = int(_.split()[0].split('.')[-1])
ValueError: invalid literal for int() with base 10: 'Bad'
root@smon03:/usr/lib/nagios/plugins/idrac#

@eeshlomi
Copy link

eeshlomi commented Jul 21, 2019 •
edited
Loading

Hi Christian,

In the aforementioned line (#417) an integer is expected but a string is provided ('Bad')
To investigate that - and improve the code - please edit the script and uncomment the line right above by removing the preceding "#-- debug ", and then run it.
It will fail again with the same error, but will also show the full output so that I can fix the code to interpret it correctly.

Thanks,
E.

@eeshlomi
Copy link

eeshlomi commented Sep 3, 2019

Fixed: https://github.com/eeshlomi/check_idrac/tree/d93738dc0bcb60f5a1c550153ba0b74160df30dd
More details under issue #58

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@ChristianMoritz @eeshlomi