See https://rootlesscontaine.rs/getting-started/common/ for the prerequisites.
Use containerd-rootless-setuptool.sh to set up rootless containerd.
$ containerd-rootless-setuptool.sh install
[INFO] Checking RootlessKit functionality
[INFO] Checking cgroup v2
[INFO] Checking overlayfs
[INFO] Creating /home/testuser/.config/systemd/user/containerd.service
...
[INFO] Installed containerd.service successfully.
[INFO] To control containerd.service, run: `systemctl --user (start|stop|restart) containerd.service`
[INFO] To run containerd.service on system startup, run: `sudo loginctl enable-linger testuser`
[INFO] Use `nerdctl` to connect to the rootless containerd.
[INFO] You do NOT need to specify $CONTAINERD_ADDRESS explicitly.The usage of containerd-rootless-setuptool.sh is almost same as dockerd-rootless-setuptool.sh .
Resource limitation flags such as nerdctl run --memory require systemd and cgroup v2: https://rootlesscontaine.rs/getting-started/common/cgroup2/
Just execute nerdctl. No need to specify the socket address manually.
$ nerdctl run -it --rm alpineDepending on your kernel version, you may need to enable FUSE-OverlayFS or set export CONTAINERD_SNAPSHOTTER=native.
(See below.)
To enable BuildKit, run the following command:
$ containerd-rootless-setuptool.sh install-buildkitThe default overlayfs snapshotter only works on the following hosts:
- Any distro, with kernel >= 5.13
- Non-SELinux distro, with kernel >= 5.11
- Ubuntu since 2015
For other hosts, fuse-overlayfs snapshotter needs to be used instead.
To enable fuse-overlayfs snapshotter, run the following command:
$ containerd-rootless-setuptool.sh install-fuse-overlayfsThen, add the following config to ~/.config/containerd/config.toml, and run systemctl --user restart containerd.service:
[proxy_plugins]
[proxy_plugins."fuse-overlayfs"]
type = "snapshot"
# NOTE: replace "1000" with your actual UID
address = "/run/user/1000/containerd-fuse-overlayfs.sock"The snapshotter can be specified as $CONTAINERD_SNAPSHOTTER.
$ export CONTAINERD_SNAPSHOTTER=fuse-overlayfs
$ nerdctl run -it --rm alpineIf fuse-overlayfs does not work, try export CONTAINERD_SNAPSHOTTER=native.
Stargz Snapshotter enables lazy-pulling of images.
To enable Stargz snapshotter, run the following command:
$ containerd-rootless-setuptool.sh install-stargzThen, add the following config to ~/.config/containerd/config.toml and run systemctl --user restart containerd.service:
[proxy_plugins]
[proxy_plugins."stargz"]
type = "snapshot"
# NOTE: replace "1000" with your actual UID
address = "/run/user/1000/containerd-stargz-grpc/containerd-stargz-grpc.sock"The snapshotter can be specified as $CONTAINERD_SNAPSHOTTER.
$ export CONTAINERD_SNAPSHOTTER=stargz
$ nerdctl run -it --rm ghcr.io/stargz-containers/alpine:3.10.2-esgzSee https://github.com/containerd/stargz-snapshotter/blob/master/docs/pre-converted-images.md for the image list.
| ⚡ Requirement | nerdctl >= 0.17 |
|---|
bypass4netns(https://github.com/rootless-containers/bypass4netns) is an accelerator for rootless networking.
This improves outgoing or incoming (with --publish option) networking performance.
The performance benchmark with iperf3 on Ubuntu 21.10 on Hyper-V VM is shown below.
| iperf3 benchmark | without bypass4netns | with bypass4netns |
|---|---|---|
| container -> host | 0.398 Gbps | 42.2 Gbps |
| host -> container | 20.6 Gbps | 47.4 Gbps |
This benchmark can be reproduced with https://github.com/rootless-containers/bypass4netns/blob/f009d96139e9e38ce69a2ea8a9a746349bad273c/Vagrantfile
Acceleration with bypass4netns is available with --label nerdctl/bypass4netns=true. You also need to have bypass4netnsd (bypass4netns daemon) to be running.
Example
$ containerd-rootless-setuptool.sh install-bypass4netnsd
$ nerdctl run -it --rm -p 8080:80 --label nerdctl/bypass4netns=true alpineMore detail is available at https://github.com/rootless-containers/bypass4netns/blob/master/README.md
- If SELinux is enabled on your host and your kernel is older than 5.13, you need to use
fuse-overlayfsinstead ofoverlayfs.