Skip to content

Latest commit

 

History

History
225 lines (181 loc) · 7.33 KB

README.md

File metadata and controls

225 lines (181 loc) · 7.33 KB
Raw

Mole's Test Environment

This provides a small envorinment where mole functions can be tested and debugged.

Once created, the test environment will provide a container running a ssh server and another container running two (2) http servers, so ssh tunnels can be created using mole.

In addition to that, the test environment provides the infrastructure to analyze the traffic going through the ssh traffic.

Topology

+-------------------+                                 
|                   |
|                   |
|  Local Computer   |
|                   |
|                   |
|                   |
+-----------+-------+                                 
            | 127.0.0.1:22122
            |
            |
            |
            | 
+-----------+-------+          +---------------------------+
|                   |          |                           |
|  mole_ssh         |          |  mole_http                |
|  SSH Server (:22) |          |  HTTP Server #1 (:80)     |
|  (192.168.33.10)  |----------|  HTTP Server #2 (:8080)   |
|                   |          |  (192.168.33.11)          |
|                   |          |                           |
+-------------------+          +---------------------------+

Required Software

You will need the following software installed on your computer to build this test environment:

Managing the Environment

Setup

$ make test-env

This builds two docker containers: mole_ssh and mole_http with a local network (192.168.33.0/24) that connects them.

mole_ssh runs a ssh server listening on port 22. This port is published on the local computer using port 22122, so ssh connections can be made using address 127.0.0.1:22122. All ssh connection to mole_ssh should be done using the user mole and the key file located on test-env/key The ssh server is configured to end any connections that is idle for three (3) or more seconds.

mole_http runs two http servers listening on port 80 and 8080, so clients would be able to access the using the following urls: http://192.168.33.11:80/ and http://192.168.33.11:8080/ It also publishes the port 8080 to the host machine to be used as a web server to test remote port forwarding.

Teardown

$ make rm-test-env

This will destroy both of the containers that was built by running make test-env: mole_ssh and mole_http.

The ssh authentication key files, test-env/key and test-env/key,pub will not be deleted.

How to use the test environment and mole altogether

Local Port Forwarding

$ make test-env
<lots of output messages here>
mole start local \
  --verbose \
  --insecure \
  --source :21112 \
  --source :21113 \
  --destination 192.168.33.11:80 \
  --destination 192.168.33.11:8080 \
  --server [email protected]:22122 \
  --key test-env/ssh-server/keys/key \
  --keep-alive-interval 2s
DEBU[0000] using ssh config file from: /home/mole/.ssh/config
DEBU[0000] server: [name=127.0.0.1, address=127.0.0.1:22122, user=mole]
DEBU[0000] tunnel: [channels:[[source=127.0.0.1:21112, destination=192.168.33.11:80] [source=127.0.0.1:21113, destination=192.168.33.11:8080]], server:127.0.0.1:22122]
DEBU[0000] connection to the ssh server is established   server="[name=127.0.0.1, address=127.0.0.1:22122, user=mole]"
DEBU[0000] start sending keep alive packets
INFO[0000] tunnel channel is waiting for connection      destination="192.168.33.11:8080" source="127.0.0.1:21113"
INFO[0000] tunnel channel is waiting for connection      destination="192.168.33.11:80" source="127.0.0.1:21112"
$ curl localhost:21112
:)
$ curl localhost:21113
:)

NOTE: If you're wondering about the smile face, that is the response from both http servers.

Remote Port Forwarding

$ mole start remote \
    --verbose \
    --insecure \
    --source 192.168.33.11:9090 \
    --destination 127.0.0.1:8080 \
    --server [email protected]:22122 \
    --key test-env/ssh-server/keys/key \
    --keep-alive-interval 2s
DEBU[0000] using ssh config file from: /home/mole/.ssh/config
DEBU[0000] server: [name=127.0.0.01, address=127.0.0.01:22122, user=mole]
DEBU[0000] tunnel: [channels:[[source=192.168.33.11:9090, destination=127.0.0.1:8080]], server:127.0.0.01:22122]
DEBU[0000] connection to the ssh server is established   server="[name=127.0.0.01, address=127.0.0.01:22122, user=mole]"
DEBU[0000] start sending keep alive packets
INFO[0000] tunnel channel is waiting for connection      destination="127.0.0.1:8080" source="192.168.33.11:9090"
DEBU[0001] connection established                        channel="[source=192.168.33.11:9090, destination=127.0.0.1:8080]"
DEBU[0001] tunnel channel has been established           channel="[source=192.168.33.11:9090, destination=127.0.0.1:8080]" server="[name=127.0.0.01, address=127.0.0.01:22122, user=mole]"
$ docker exec mole_ssh curl -s localhost:9090
:)

How to manage the ssh server instance

$ docker exec -ti mole_ssh supervisorctl <stop|start|restart> sshd

How to force mole to reconnect to the ssh server

  1. Create the mole's test environment
$ make test-env
<lots of output messages here>
  1. Start mole
mole start local \
  --verbose \
  --insecure \
  --source :21112 \
  --source :21113 \
  --destination 192.168.33.11:80 \
  --destination 192.168.33.11:8080 \
  --server [email protected]:22122 \
  --key test-env/ssh-server/keys/key \
  --keep-alive-interval 2s
DEBU[0000] using ssh config file from: /home/mole/.ssh/config
DEBU[0000] server: [name=127.0.0.1, address=127.0.0.1:22122, user=mole]
DEBU[0000] tunnel: [channels:[[source=127.0.0.1:21112, destination=192.168.33.11:80] [source=127.0.0.1:21113, destination=192.168.33.11:8080]], server:127.0.0.1:22122]
DEBU[0000] connection to the ssh server is established   server="[name=127.0.0.1, address=127.0.0.1:22122, user=mole]"
DEBU[0000] start sending keep alive packets
INFO[0000] tunnel channel is waiting for connection      destination="192.168.33.11:8080" source="127.0.0.1:21113"
INFO[0000] tunnel channel is waiting for connection      destination="192.168.33.11:80" source="127.0.0.1:21112"
  1. Kill all ssh processes running on the container holding the ssh server

The container will take care of restarting the ssh server once it gets killed.

$ docker exec mole_ssh pgrep sshd
8
15
17
$ docker exec mole_ssh kill -9 8 15 17
  1. The mole's output should be something like the below
WARN[0019] reconnecting to ssh server                    error=EOF
INFO[0022] tunnel channel is waiting for connection      local="127.0.0.1:21113" remote="192.168.33.11:8080"
INFO[0022] tunnel channel is waiting for connection      local="127.0.0.1:21112" remote="192.168.33.11:80"
  1. Validate the tunnel is still working
$ curl 127.0.0.1:21112; curl 127.0.0.1:21113
:)
:)

How to check ssh server logs

$ docker exec mole_ssh tail -f /var/log/messages

Packet Analisys

If you need to analyze the traffic going through the tunnel, the test environment provide a handy way to sniff all traffic following the steps below:

$ make test-env
<lots of output messages here>
$ bash test-env/sniff
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes

Wireshark will open and should show all traffic passing through the tunnel.