Releases · devspace-sh/devspace

20 Jul 21:24

v6.0.0-beta.7

103068f

v6.0.0-beta.7 Pre-release

Pre-release

Config Version v2beta1

With v6 a new config version v2beta1 was introduced, that restructures many parts of the DevSpace config, such as deployments, dev, commands and vars. Older config versions are still supported and will be converted automatically in memory by DevSpace to this new version. To see how the old config got converted, run devspace print, which can be a starting point on how to convert your older DevSpace config.

Pipelines

DevSpace used a declarative approach to define its dev, build, deploy and purge pipeline, however we felt most of it was hardcoded and difficult to change. We introduced hooks to make these pipelines more adjustable, however in many cases this was difficult to understand as the pipeline was still implicit and through hooks scattered around the devspace.yaml.

With DevSpace v6 we introduce a pipelines concept that allows you to override DevSpace default behaviour and create more dynamic and powerful pipelines compared to what DevSpace offers you as a default. These pipelines are written similar to github actions and DevSpace provides custom commands that allow you to build images, deploy deployments as well as stop and start development. This also allows you to define concurrency a lot easier, so from now on you can easily build, deploy or start development in parallel as you desire.

Example: Simple Procedural Pipeline

With pipelines you can decide if to use the declarative approach or define objects on the fly with the --set flag. A simple project that deploys an alpine container and then starts syncing to it can be purely written in the new pipeline form:

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

You want DRY config and we heard you! With imports you can now merge different devspace.yaml's together and define your variables, deployments, commands and pipelines in a single repository or file and import them into other projects through git, urls or local paths. With the new pipelines you can then define what images to build, what deployments to deploy and what dev configurations to start and stop:

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

DevSpace version 6 introduces some breaking changes to work efficiently with the new Pipelines feature. Almost all older devspace.yaml should still work as config is migrated automatically, however we removed some deprecated and older functionality that we felt is now either obsolete or unused.

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

DevSpace determines which dependency was deployed now solely based on the name, so multiple dependencies or nested dependencies with the same name will be resolved as the same dependency and deployed only once.

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

06 Jul 16:33

FabianKramm

v6.0.0-beta.6

7479e66

v6.0.0-beta.6 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

05 Jul 20:52

FabianKramm

v6.0.0-beta.5

5cea9b6

v6.0.0-beta.5 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

29 Jun 09:59

FabianKramm

v6.0.0-beta.4

0ba1640

v6.0.0-beta.4 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

24 Jun 13:42

FabianKramm

v6.0.0-beta.3

467178b

v6.0.0-beta.3 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

24 Jun 10:40

FabianKramm

v6.0.0-beta.2

e790a01

v6.0.0-beta.2 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

23 Jun 08:27

FabianKramm

v6.0.0-beta.1

0b8402b

v6.0.0-beta.1 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

21 Jun 06:01

LukasGentele

v6.0.0-beta.0

da3db1a

v6.0.0-beta.0 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

0 Join discussion

24 May 15:10

FabianKramm

v6.0.0-alpha.19

1d04779

v6.0.0-alpha.19 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

13 May 13:27

FabianKramm

v6.0.0-alpha.18

c93acdd

v6.0.0-alpha.18 Pre-release

Pre-release

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

version: v2beta1
name: my-project
pipelines:
  # Override the default devspace dev behaviour
  dev:
    run: |-
      # Create a new deployment on the fly with an alpine container
      create_deployments my-simple --set helm.values.containers[0].image=alpine

      # Starts syncing local directory to /app in that container and open a terminal to it
      start_dev my-dev --set imageSelector=alpine \
                       --set sync[0].path=.:/app \
                       --set terminal.enabled=true

Example: Simple Declarative Pipeline

As configurations get more complex, you probably want to reuse config or define it in a separate place, here the declarative approach makes sense that you can reference in your pipeline:

version: v2beta1
name: my-project

vars:
  IMAGE: alpine

deployments:
  my-simple: ...
  my-other-deployment: ...
  dependent-deployment: ...

dev:
  my-dev: ...
  
commands:
  dev:
    run_watch -p devspace.yaml -- devspace run-pipeline dev

pipelines:
  common:
    run: |-
      # Deploy the deployments in parallel
      create_deployments my-simple my-other-deployment

      # Then deploy the dependent deployment
      create_deployments dependent-deployment
        
      # Starts my-dev configuration if devspace dev and enable terminal as well
      if is_command dev; then
        start_dev my-dev --set terminal.enabled=true
      fi
  deploy:
    run: |-
       # Run the pipeline common
      run_pipelines common
  dev:
    run: |-
      # Run the pipeline common
      run_pipelines common

Imports

import.yaml

version: v2beta1
name: import1

vars:
  MY_IMPORTED_VAR: test

functions:
  my-function: echo ${MY_IMPORTED_VAR}

pipelines:
  print-var:
    run: |-
      my-function

devspace.yaml

version: v2beta1
name: main

imports:
- path: import.yaml
# Conditionally importing is also possible
- path: import2.yaml
  enabled: $(is_equal ${devspace.namespace} "test")

pipelines:
  dev:
    run: |-
       # will print 'test'
       run_pipelines print-var

SSH & Proxy Commands

It is now possible to let DevSpace setup an SSH connection as well as proxy certain commands from the local host to the container:

name: devspace-project
dev:
  my-dev:
    imageSelector: nginx
    ssh:
      enabled: true
    proxyCommands:
    - command: git
    - command: devspace
    - command: kubectl

With the configuration above you can run the following (proxyCommands also works with terminal or kubectl exec):

ssh my-dev.devspace-project.devspace
# Run the following commands inside the container that are proxied to the local computer
$/ git 
$/ devspace 
$/ kubectl

!! Breaking Changes !!

Removed Flags:

--deployments was removed, use pipeline logic instead
--skip-pipeline in devspace dev was removed, use pipeline logic instead
--verbose-dependencies and --skip-dependencies was removed and dependencies will be pulled every run
--interactive was removed from devspace dev, use pipeline logic instead
--parent-profile was removed, use multiple --profile flags instead
--restore-vars, --vars-secret and --save-vars was removed. Use vars.MY_VAR.remote: true instead
--verbose-sync was removed, use --debug instead
--exit-after-deploy, --terminal-reconnect, --portforwarding and --sync was removed
--wait, --timeout was removed, use pipeline logic instead
--container-path and --local-path were removed from devspace sync, please use --path instead

Removed `dev.autoReload`

This functionality was removed from DevSpace and will be replaced in future by automatically reloading pipelines

DevSpace will no longer ask for undefined variables

If you are using a variable like this, DevSpace will not ask anymore for its value:

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

rather change it to

vars:
- name: VARIABLE

deployments:
- name: ...
   helm:
    values:
      key: ${VARIABLE}

Dependency names must be unique

Other Breaking Changes

Removed devspace use profile instead use profile activation instead
Removed dependencies[*].skipBuild
Removed dev.sync[*].onDownload
Removed deployments[*].helm.driver, deployments[*].helm.deleteArgs, deployments[*].kubectl.deleteArgs and deployments[*].helm.path
Removed deployments[*].helm.v2
Dependencies are now purged after deployments are deleted instead of before
Variables in commands will be resolved by default now
devspace dev is not taking any arguments anymore

Many other changes!

There are many other improvements and changes that went into this new DevSpace version. We'll release full exhaustive release notes soon.

Assets 22

Releases: devspace-sh/devspace

v6.0.0-beta.7

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

Example: Simple Declarative Pipeline

Imports

SSH & Proxy Commands

!! Breaking Changes !!

Removed Flags:

Removed dev.autoReload

DevSpace will no longer ask for undefined variables

Dependency names must be unique

Other Breaking Changes

Many other changes!

v6.0.0-beta.6

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

Example: Simple Declarative Pipeline

Imports

SSH & Proxy Commands

!! Breaking Changes !!

Removed Flags:

Removed dev.autoReload

DevSpace will no longer ask for undefined variables

Dependency names must be unique

Other Breaking Changes

Many other changes!

v6.0.0-beta.5

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

Example: Simple Declarative Pipeline

Imports

SSH & Proxy Commands

!! Breaking Changes !!

Removed Flags:

Removed dev.autoReload

DevSpace will no longer ask for undefined variables

Dependency names must be unique

Other Breaking Changes

Many other changes!

v6.0.0-beta.4

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

Example: Simple Declarative Pipeline

Imports

SSH & Proxy Commands

!! Breaking Changes !!

Removed Flags:

Removed dev.autoReload

DevSpace will no longer ask for undefined variables

Dependency names must be unique

Other Breaking Changes

Many other changes!

v6.0.0-beta.3

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

Example: Simple Declarative Pipeline

Imports

SSH & Proxy Commands

!! Breaking Changes !!

Removed Flags:

Removed dev.autoReload

DevSpace will no longer ask for undefined variables

Dependency names must be unique

Other Breaking Changes

Many other changes!

v6.0.0-beta.2

Config Version v2beta1

Pipelines

Example: Simple Procedural Pipeline

Example: Simple Declarative Pipeline

Imports

SSH & Proxy Commands

!! Breaking Changes !!

Removed Flags:

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`

Removed `dev.autoReload`