README.md

Sensor and light controller for SHDB17

This uses Arduino, the Adafruit TSL2591 High Dynamic Range Digital Light Sensor and a blue LED.

Hardware setup

• Connect the sensor to the board as described here: https://learn.adafruit.com/adafruit-tsl2591/wiring-and-test
• Connect a blue LED as described here: https://www.arduino.cc/en/Tutorial/Blink

Development setup

• Install the Arduino IDE
• Install the sensor library as described here https://learn.adafruit.com/adafruit-tsl2591/wiring-and-test or from the library manager in the Arduino IDE
• Install the Adafruit Unified Sensorlibrary as described here https://learn.adafruit.com/adafruit-tsl2591/wiring-and-test or from the library manager in the Arduino IDE