QBrainwaveOSC was inspired by BrainwaveOSC by trentbrooks, and written in QT. It converts signals from Neurosky(r) devices connected as serial port and sends them as OSC.
To build this project you'll need only QT (5 or 6) and cmake. Type:
cd QBrainwaveOSC
mkdir build
cd build
cmake ..
cmake --build .
cmake --install .
- Connect you device to Bluetooth (Neurosky(r) devices are connecting as Serial Port)
- Choose serial port
- Be sure if OSC settings are correct (OSC settings can be changed during running).
- Press connect to start.
If you can see changing graphs, device is working correctly.
To contact me, please use my contact form