[BUG] Motor went past lowest bike resistance

[madxime]

Description

I was doing a workout in Rouvy where the goal was to keep a 85 RPM cadence with 120 RPM 15 seconds bursts. When I reached the first burst, the bike resistance dropped almost instantly when I started spinning faster, and the motor kept turning past the minimum resistance of the bike's knob which broke the internal spur gear (i.e. this one: https://github.com/doudar/SmartSpin2k/blob/develop/Hardware/Common%20Assets/Gears/Spur%20gear%201M%2011T.STL)

Steps to reproduce

I don't know

Expected behavior
The resistance shouldn't decrease or increase past some failsafe value

Actual behavior
The resistance went past the bike's minimum resistance value

Additional Information

I was using an IC Bike SE with smartspin2k version 25.1.10. I had kept all the default tuning values. If that can be useful, I noticed that my bike's minimum reported resistance is 1 when the knob is set to the lowest value, not 0.

Is there something I should've tuned that would've prevented this issue from happening?