GridSamplerKernel.cpp

#include <ATen/ATen.h>
#include <ATen/Dispatch.h>
#include <ATen/Parallel.h>
#include <ATen/TensorUtils.h>
#include <ATen/NativeFunctions.h>
#include <ATen/native/GridSampler.h>
#include <ATen/native/cpu/GridSamplerKernel.h>
#include <ATen/cpu/vml.h>
#include <c10/util/C++17.h>

#include <algorithm>
#include <cstring>
#include <type_traits>

namespace at { namespace native { namespace {

/**  NOTE [ Grid Sample CPU Kernels ]
 *
 *   Implementation of vectorized grid sample CPU kernels is divided into three
 *   parts. More detailed description exist after this paragraph, but on a high
 *   level, they are
 *   1. `ComputeLocation` struct
 *      + Computes the interpolation location basing on padding mode.
 *   2. `ApplyGridSample` struct
 *      + Owns N (# spatial dims) `ComputeLocation` structs, and uses them to
 *        compute the interpolation locations.
 *      + Interpolates the values and writes to output.
 *   3. `grid_sample_2d_grid_slice_iterator` function
 *      + Iterates over a slice of the grid tensor based on the geometry by the
 *        spatial ordering, i.e., the first iteration will process grid values
 *           grid[n, 0, 0, :], grid[n, 0, 1, :], grid[n, 0, 2, :], ...
 *        (Recall that, e.g., 2D grid has shape [N x H x W x 2], so grid[n, ...]
 *         is a slice, and grid[n, h, w, :] contains the values for a single
 *         output spatial location.)
 *      + Applies a given operator at each iteration, so we can use the same
 *        pattern for forward and backward.
 *
 *   Putting everything together, we have, e.g., the forward kernel implemented
 *   as
 *
 *      // `ApplyGridSample` struct that processes grid values, extracts and
 *      // interpolates input values, and write to output.
 *      ApplyGridSample<scalar_t, 2, interp, padding> grid_sample(input_accessor);
 *
 *      // For each slice, we call `grid_sample_2d_grid_slice_iterator` with
 *      //   1. the grid slice, and
 *      //   2. a lambda that takes in
 *      //      i.   location vectors (x and y for 2D) extracted from grid
 *      //      ii.  `spatial_offset` as the spatial offset of these vectors
 *      //           from the beginning of this slice.
 *      //      iii. `len` as the number of valid locations in the vectors.
 *      //           (There might not be enough near boundary.)
 *      for (int n = 0; n < input_accessor.size(0); n++) {
 *        grid_sample_2d_grid_slice_iterator(
 *          grid_accessor[n],
 *          [&](const Vec256<scalar_t>& grid_x,
 *              const Vec256<scalar_t>& grid_y,
 *              int64_t spatial_offset, int64_t len) {
 *            grid_sample.forward(out_accessor[n], input_accessor[n],
 *                                spatial_offset, grid_x, grid_y, len);
 *          });
 *      }
 *
 *   Now we talk about details of each of these three parts:
 *
 *   1. `ComputeLocation` struct
 *      Transforms grid values into interpolation locations of the input tensor
 *      for a particular spatial dimension, based on the size of that dimension
 *      in input tensor, and the padding mode.
 *
 *        template<typename scalar_t, GridSamplerPadding padding>
 *        struct ComputeLocation {
 *          using Vec = Vec256<scalar_t>;
 *
 *          // ctor
 *          ComputeLocation(int64_t size);
 *
 *          // Given grid values `in`, return the interpolation locations after
 *          // un-normalization and padding mechanism (elementwise).
 *          Vec apply(const Vec &in) const;
 *
 *          // Similar to `apply`, but also returns `d apply(in) / d in`
 *          // (elementwise).
 *          // this is often used in gradient computation.
 *          std::pair<Vec, Vec> apply_get_grad(const Vec &in) const;
 *        };
 *
 *   2. `ApplyGridSample` struct
 *      Owns N `ComputeLocation` structs, where N is the number of spatial
 *      dimensions. Given N input grid vectors (one for each spatial dimension)
 *      and spatial offset, it gets the interpolation locations from
 *      `ComputeLocation`s, applies interpolation procedure, and then writes to
 *      the output (or grad_input & grad_grid in backward).
 *
 *        template<typename scalar_t, int spatial_dim,
 *                 GridSamplerInterpolation interp,
 *                 GridSamplerPadding padding>
 *        struct ApplyGridSample {
 *
 *          // ctor
 *          ApplyGridSample(const TensorAccessor<scalar_t, 4>& input);
 *
 *          // Applies grid sampling (forward) procedure:
 *          //   1. computes interpolation locations from grid values `grid_x`
 *          //      and `grid_y`,
 *          //   2. interpolates output values using the locations and input
 *          //      data in `inp_slice`, and
 *          //   3. writes the first `len` values in the interpolated vector to
 *          //      `out_slice` with spatial offset being `offset`.
 *          //
 *          // This assimes that `grid_x` and `grid_y` all contain valid grid
 *          // values \in [-1, 1], even at indices greater than `len`.
 *          //
 *          // The `*_slice` argument namess mean samples within a batch (i.e.,
 *          // with the batch dimension sliced out).
 *          void forward(TensorAccessor<scalar_t, 3>& out_slice,
 *                       const TensorAccessor<scalar_t, 3>& inp_slice,
 *                       int64_t offset, const Vec& grid_x, const Vec& grid_y,
 *                       int64_t len) const;
 *
 *          // Applies grid sampling (backward) procedure. Arguments semantics
 *          // and strategy are similar to those of `forward`.
 *          void backward(TensorAccessor<scalar_t, 3>& gInp_slice,
 *                        TensorAccessor<scalar_t, 3>& gGrid_slice,
 *                        const TensorAccessor<scalar_t, 3>& gOut_slice,
 *                        const TensorAccessor<scalar_t, 3>& inp_slice,
 *                        int64_t offset, const Vec& grid_x, const Vec& grid_y,
 *                        int64_t len) const;
 *        };
 *
 *   3. `grid_sample_2d_grid_slice_iterator` function
 *      Among the tensors we work with, we know that the output tensors are
 *      contiguous (i.e., `output` in forward, and `grad_input` & `grad_grid` in
 *      backward), we need to randomly read `input` anyways, and `grad_output`
 *      usually comes from autograd and is often contiguous. So we base our
 *      iterating strategy on the geometry of grid.
 *      `grid_sample_2d_grid_slice_iterator` function provides an abstraction to
 *      efficiently iterates through a `grid` slice (without batch dimension).
 *      See comments of that function on the specific cases and strategies used.
 *
 *        template<typename scalar_t, typename ApplyFn>
 *        void grid_sample_2d_grid_slice_iterator(
 *          const TensorAccessor<scalar_t, 3>& grid_slice,
 *          const ApplyFn &apply_fn);
 *
 *      `apply_fn` is a function/lambda that takes in
 *           i.   location vectors (x and y for 2D) extracted from grid
 *           ii.  `spatial_offset` as the spatial offset of these vectors
 *                from the beginning of this slice.
 *           iii. `len` as the number of valid locations in the vectors.
 *                (There might not be enough near boundary.)

 *       It should be callable as if it has declaration:
 *          void apply_fn(const Vec256<scalar_t>& grid_x,
 *                        const Vec256<scalar_t>& grid_y,
 *                        int64_t spatial_offset, int64_t len);
 *
 *      `apply_fn` will be called multiple times, and together cover the entire
 *      output spatial space.
 *
 *  Now you should be able tp understand everything about the implementation of
 *  2D forward kernel shown at the beginning of this note.
 *
 **/


using at::native::detail::GridSamplerInterpolation;
using at::native::detail::GridSamplerPadding;
using namespace at::vec256;


// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ComputeLocation ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Struct to compute interpolation location from grid values, and to apply
// padding mechanism (e.g., reflection).
// See NOTE [ Grid Sample CPU Kernels ] for details.

template<typename scalar_t, bool align_corners>
struct ComputeLocationBase;

template<typename scalar_t>
struct ComputeLocationBase<scalar_t, /*align_corners=*/true> {
  using Vec = Vec256<scalar_t>;

  // values are clipped to between 0 and max_val
  const scalar_t max_val;
  // unnormalization scaling factor
  const scalar_t scaling_factor;
  // reflection parameters: reflected coordinates land in [low, low+span] inclusive
  const scalar_t low; // only used when align_corners=False
  const scalar_t twice_span;
  // if the reflecting span is empty, all reflected coords are set to 0
  const bool empty;

  ComputeLocationBase(int64_t size)
    : max_val(static_cast<scalar_t>(size - 1))
    , scaling_factor(static_cast<scalar_t>(size - 1) / 2)
    , low(static_cast<scalar_t>(0))
    , twice_span(static_cast<scalar_t>(size - 1) * 2)
    , empty(size <= 1) {}

  inline Vec unnormalize(const Vec &in) const {
    return (in + Vec(1)) * Vec(scaling_factor);
  }

  inline Vec clip_coordinates(const Vec &in) const {
    return minimum(Vec(max_val), maximum(in, Vec(0)));
  }

  // same as clip_coordinates but also returns the gradient multiplier
  inline std::pair<Vec, Vec> clip_coordinates_get_grad(const Vec &in) const {
    using int_t = int_same_size_t<scalar_t>;
    auto bounded_lo = maximum(in, Vec(0));
    // Integral type equality comparison is very very fast because it just looks
    // at the bits. Casting is free too. So we use the following pattern instead
    // of comparison + blendv.
    auto in_bound_lo = cast<scalar_t>(cast<int_t>(bounded_lo) == cast<int_t>(in));
    auto res = minimum(bounded_lo, Vec(max_val));
    auto in_bound_hi = cast<scalar_t>(cast<int_t>(res) == cast<int_t>(in));
    return std::make_pair(res, in_bound_lo & in_bound_hi);
  }

  inline Vec reflect_coordinates(const Vec &in) const {
    if (empty) {
      return Vec(0);
    }
    Vec twice_span_vec(twice_span);
    auto abs_in = in.abs();
    auto fdouble_flips = abs_in / twice_span_vec;
    auto double_flips = fdouble_flips.trunc();
    auto extra = abs_in - double_flips * twice_span_vec;
    // Now we need to test if extra > max_val to find out if another flip is
    // needed. The following comparison does that and returns the correct
    // flipped value.
    return minimum(extra, twice_span_vec - extra);
  }

  // same as reflect_coordinates but also returns the gradient multiplier
  inline std::pair<Vec, Vec> reflect_coordinates_get_grad(const Vec &in) const {
    if (empty) {
      return std::make_pair(Vec(0), Vec(0));
    }
    Vec twice_span_vec(twice_span);
    auto neg_in = in < Vec(0);
    auto abs_in = in.abs();
    auto fdouble_flips = abs_in / twice_span_vec;
    auto double_flips = fdouble_flips.trunc();

    auto extra = abs_in - double_flips * twice_span_vec;
    auto reflected_extra = twice_span_vec - extra;
    auto one_more_flip = extra > reflected_extra;

    return std::make_pair(
      Vec::blendv(extra, reflected_extra, one_more_flip),
      Vec::blendv(Vec(1), Vec(-1), one_more_flip ^ neg_in)
    );
  }
};

template<typename scalar_t>
struct ComputeLocationBase<scalar_t, /*align_corners=*/false> {
  using Vec = Vec256<scalar_t>;

  // values are clipped to between 0 and max_val
  const scalar_t max_val;
  // unnormalization scaling factor
  const scalar_t scaling_factor;
  // reflection parameters: reflected coordinates land in [low, low+span] inclusive
  const scalar_t low;
  const scalar_t twice_span;
  // if the reflecting span is empty, all reflected coords are set to 0
  const bool empty; // only used when align_corners=True

  ComputeLocationBase(int64_t size)
    : max_val(static_cast<scalar_t>(size - 1))
    , scaling_factor(static_cast<scalar_t>(size) / 2)
    , low(static_cast<scalar_t>(-0.5))
    , twice_span(static_cast<scalar_t>(size) * 2)
    , empty(size <= 0) {}

  inline Vec unnormalize(const Vec &in) const {
    return (in + Vec(1)) * Vec(scaling_factor) - Vec(0.5);
  }

  inline Vec clip_coordinates(const Vec &in) const {
    return minimum(Vec(max_val), maximum(in, Vec(0)));
  }

  // same as clip_coordinates but also returns the gradient multiplier
  inline std::pair<Vec, Vec> clip_coordinates_get_grad(const Vec &in) const {
    using int_t = int_same_size_t<scalar_t>;
    auto bounded_lo = maximum(in, Vec(0));
    // Integral type equality comparison is very very fast because it just looks
    // at the bits. Casting is free too. So we use the following pattern instead
    // of comparison + blendv.
    auto in_bound_lo = cast<scalar_t>(cast<int_t>(bounded_lo) == cast<int_t>(in));
    auto res = minimum(bounded_lo, Vec(max_val));
    auto in_bound_hi = cast<scalar_t>(cast<int_t>(res) == cast<int_t>(in));
    return std::make_pair(res, in_bound_lo & in_bound_hi);
  }

  inline Vec reflect_coordinates(const Vec &in) const {
    Vec twice_span_vec(twice_span), low_vec(low);
    // Since reflection is around low and low+span, subtract low before
    // the reflection, and then add it back at the end.
    auto abs_in = (in - low_vec).abs();
    auto fdouble_flips = abs_in / twice_span_vec;
    auto double_flips = fdouble_flips.trunc();
    auto extra = abs_in - double_flips * twice_span_vec;
    // Now we need to test if extra > max_val to find out if another flip is
    // needed. The following comparison does that and returns the correct
    // flipped value.
    return minimum(extra, twice_span_vec - extra) + low_vec;
  }

  // same as reflect_coordinates but also returns the gradient multiplier
  inline std::pair<Vec, Vec> reflect_coordinates_get_grad(const Vec &in) const {
    Vec twice_span_vec(twice_span), low_vec(low);
    Vec in_minus_low = in - low_vec;
    auto neg_in = in_minus_low < Vec(0);
    auto abs_in = in_minus_low.abs();
    auto fdouble_flips = abs_in / twice_span_vec;
    auto double_flips = fdouble_flips.trunc();

    auto extra = abs_in - double_flips * twice_span_vec;
    auto reflected_extra = twice_span_vec - extra;
    auto one_more_flip = extra > reflected_extra;

    return std::make_pair(
      Vec::blendv(extra, reflected_extra, one_more_flip) + low_vec,
      Vec::blendv(Vec(1), Vec(-1), one_more_flip ^ neg_in)
    );
  }
};

template<typename scalar_t, GridSamplerPadding padding, bool align_corners>
struct ComputeLocation;

template<typename scalar_t, bool align_corners>
struct ComputeLocation<scalar_t, GridSamplerPadding::Zeros, align_corners>
  : ComputeLocationBase<scalar_t, align_corners> {
  using Vec = Vec256<scalar_t>;
  using ComputeLocationBase<scalar_t, align_corners>::unnormalize;
  using ComputeLocationBase<scalar_t, align_corners>::scaling_factor;

  using ComputeLocationBase<scalar_t, align_corners>::ComputeLocationBase;

  inline Vec apply(const Vec &in) const {
    return unnormalize(in);
  }

  inline std::pair<Vec, Vec> apply_get_grad(const Vec &in) const {
    return std::make_pair(unnormalize(in), Vec(scaling_factor));
  }
};

template<typename scalar_t, bool align_corners>
struct ComputeLocation<scalar_t, GridSamplerPadding::Border, align_corners>
  : ComputeLocationBase<scalar_t, align_corners> {
  using Vec = Vec256<scalar_t>;
  using ComputeLocationBase<scalar_t, align_corners>::unnormalize;
  using ComputeLocationBase<scalar_t, align_corners>::clip_coordinates;
  using ComputeLocationBase<scalar_t, align_corners>::clip_coordinates_get_grad;
  using ComputeLocationBase<scalar_t, align_corners>::scaling_factor;

  using ComputeLocationBase<scalar_t, align_corners>::ComputeLocationBase;

  inline Vec apply(const Vec &in) const {
    return clip_coordinates(unnormalize(in));
  }

  inline std::pair<Vec, Vec> apply_get_grad(const Vec &in) const {
    Vec res, grad_clip;
    std::tie(res, grad_clip) = clip_coordinates_get_grad(unnormalize(in));
    return std::make_pair(res, grad_clip & Vec(scaling_factor));
  }
};

template<typename scalar_t, bool align_corners>
struct ComputeLocation<scalar_t, GridSamplerPadding::Reflection, align_corners>
  : ComputeLocationBase<scalar_t, align_corners> {
  using Vec = Vec256<scalar_t>;
  using ComputeLocationBase<scalar_t, align_corners>::unnormalize;
  using ComputeLocationBase<scalar_t, align_corners>::clip_coordinates;
  using ComputeLocationBase<scalar_t, align_corners>::clip_coordinates_get_grad;
  using ComputeLocationBase<scalar_t, align_corners>::reflect_coordinates;
  using ComputeLocationBase<scalar_t, align_corners>::reflect_coordinates_get_grad;
  using ComputeLocationBase<scalar_t, align_corners>::scaling_factor;

  using ComputeLocationBase<scalar_t, align_corners>::ComputeLocationBase;

  inline Vec apply(const Vec &in) const {
    auto res = reflect_coordinates(unnormalize(in));
    // when align_corners=False, reflection does not auto clip coords
    if (!align_corners) {
      res = clip_coordinates(res);
    }
    return res;
  }

  inline std::pair<Vec, Vec> apply_get_grad(const Vec &in) const {
    Vec res, grad_refl, grad_clip, grad(scaling_factor);
    std::tie(res, grad_refl) = reflect_coordinates_get_grad(unnormalize(in));
    grad = grad_refl * grad;
    if (!align_corners) {
      std::tie(res, grad_clip) = clip_coordinates_get_grad(res);
      grad = grad_clip & grad;
    }
    return std::make_pair(res, grad);
  }
};

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ApplyGridSample ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Struct to apply grid sample (reading from input, interpolate, and write to
// output).
// See NOTE [ Grid Sample CPU Kernels ] for details.

template<typename scalar_t>
static inline void
mask_scatter_add(const scalar_t *src, scalar_t* base_addr,
                 const int_same_size_t<scalar_t> *offsets,
                 const int_same_size_t<scalar_t> *mask, int64_t len) {
  #ifndef _MSC_VER
  # pragma unroll
  #endif
  for (int64_t i = 0; i < len; i++) {
    if (mask[i] & 0x01) {
      base_addr[offsets[i]] += src[i];
    }
  }
}

template<typename scalar_t, int spatial_dim,
         GridSamplerInterpolation interp,
         GridSamplerPadding padding,
         bool align_corners>
struct ApplyGridSample;

template<typename scalar_t, GridSamplerPadding padding, bool align_corners>
struct ApplyGridSample<scalar_t, 2, GridSamplerInterpolation::Bilinear,
                       padding, align_corners> {
  using Vec = Vec256<scalar_t>;
  using integer_t = int_same_size_t<scalar_t>;
  using iVec = Vec256<integer_t>;

  const int64_t inp_H;
  const int64_t inp_W;
  const int64_t inp_sH;
  const int64_t inp_sW;
  const int64_t C;
  const int64_t inp_sC;
  const ComputeLocation<scalar_t, padding, align_corners> compute_H;
  const ComputeLocation<scalar_t, padding, align_corners> compute_W;
  const bool must_in_bound = padding != GridSamplerPadding::Zeros;

  ApplyGridSample(const TensorAccessor<scalar_t, 4>& input)
    : inp_H(input.size(2))
    , inp_W(input.size(3))
    , inp_sH(input.stride(2))
    , inp_sW(input.stride(3))
    , C(input.size(1))
    , inp_sC(input.stride(1))
    , compute_H(input.size(2))
    , compute_W(input.size(3)) {}

  inline std::tuple<
    Vec, Vec, Vec, Vec,       // distances to 4 sides
    Vec, Vec, Vec, Vec,       // interpolation weights wrt 4 corners
    Vec, Vec, Vec, Vec,       // in_bound masks
    iVec, iVec                // y_n and x_w
  >
  compute_interp_params(const Vec& x, const Vec& y) const {
    // get NE, NW, SE, SW pixel values from (x, y)
    // assuming we get exact integer representation and just use scalar_t
    // if we don't, the weights will be garbage anyways.
    auto x_w = x.floor();
    auto y_n = y.floor();

    // get distances to each side
    auto w = x - x_w;
    auto e = Vec(1) - w;
    auto n = y - y_n;
    auto s = Vec(1) - n;

    // get interpolation weights for each neighbor
    // e.g., for the nw corder, the weight is `dist_to_south * dist_to_east`.
    auto nw = s * e;
    auto ne = s * w;
    auto sw = n * e;
    auto se = n * w;

    auto i_x_w = convert_to_int_of_same_size(x_w);
    auto i_y_n = convert_to_int_of_same_size(y_n);
    auto i_x_e = i_x_w + iVec(1);
    auto i_y_s = i_y_n + iVec(1);

    // Use int comparison because it is much faster than float comp with AVX2
    // (latency 1 cyc vs. 4 cyc on skylake)
    // Avoid using the le and ge because those are not implemented in AVX2 and
    // are actually simulated using multiple instructions.
    auto w_mask = must_in_bound ? iVec(-1)  // true = all ones
                                : (i_x_w > iVec(-1)) & (i_x_w < iVec(inp_W));
    auto n_mask = must_in_bound ? iVec(-1)  // true = all ones
                                : (i_y_n > iVec(-1)) & (i_y_n < iVec(inp_H));
    auto e_mask = must_in_bound ? (i_x_e < iVec(inp_W))
                                : (i_x_e > iVec(-1)) & (i_x_e < iVec(inp_W));
    auto s_mask = must_in_bound ? (i_y_s < iVec(inp_H))
                                : (i_y_s > iVec(-1)) & (i_y_s < iVec(inp_H));
    auto nw_mask = cast<scalar_t>(must_in_bound ? iVec(-1) : (w_mask & n_mask));
    auto ne_mask = cast<scalar_t>(e_mask & n_mask);
    auto sw_mask = cast<scalar_t>(w_mask & s_mask);
    auto se_mask = cast<scalar_t>(e_mask & s_mask);

    return std::make_tuple(
      n, s, w, e,
      nw, ne, sw, se,
      nw_mask, ne_mask, sw_mask, se_mask,
      i_y_n, i_x_w);
  }

  inline void forward(TensorAccessor<scalar_t, 3>& out_slice,
                      const TensorAccessor<scalar_t, 3>& inp_slice,
                      int64_t offset, const Vec& grid_x, const Vec& grid_y,
                      int64_t len) const {
    auto x = compute_W.apply(grid_x);
    auto y = compute_H.apply(grid_y);

    auto interp_params = compute_interp_params(x, y);

    auto nw = std::get<4>(interp_params);
    auto ne = std::get<5>(interp_params);
    auto sw = std::get<6>(interp_params);
    auto se = std::get<7>(interp_params);

    auto nw_mask = std::get<8>(interp_params);
    auto ne_mask = std::get<9>(interp_params);
    auto sw_mask = std::get<10>(interp_params);
    auto se_mask = std::get<11>(interp_params);

    auto i_y_n = std::get<12>(interp_params);
    auto i_x_w = std::get<13>(interp_params);

    auto i_nw_offset = i_y_n * iVec(inp_sH) + i_x_w * iVec(inp_sW);
    auto i_ne_offset = i_nw_offset + iVec(inp_sW);
    auto i_sw_offset = i_nw_offset + iVec(inp_sH);
    auto i_se_offset = i_sw_offset + iVec(inp_sW);

    #ifndef _MSC_VER
    # pragma unroll
    #endif
    for (int64_t c = 0; c < C; ++c) {
      auto inp_slice_C_ptr = inp_slice[c].data();

      // mask_gather zeros out the mask, so we need to make copies
      Vec nw_mask_copy = nw_mask;
      Vec ne_mask_copy = ne_mask;
      Vec sw_mask_copy = sw_mask;
      Vec se_mask_copy = se_mask;
      auto nw_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_nw_offset, nw_mask_copy);
      auto ne_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_ne_offset, ne_mask_copy);
      auto sw_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_sw_offset, sw_mask_copy);
      auto se_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_se_offset, se_mask_copy);

      auto interpolated = (nw_val * nw) + (ne_val * ne) + (sw_val * sw) + (se_val * se);
      interpolated.store(out_slice[c].data() + offset, len);
    }
  }

  inline void backward(TensorAccessor<scalar_t, 3>& gInp_slice,
                       TensorAccessor<scalar_t, 3>& gGrid_slice,
                       const TensorAccessor<scalar_t, 3>& gOut_slice,
                       const TensorAccessor<scalar_t, 3>& inp_slice,
                       int64_t offset, const Vec& grid_x, const Vec& grid_y,
                       int64_t len) const {
    Vec x, y, gx_mult, gy_mult;
    std::tie(x, gx_mult) = compute_W.apply_get_grad(grid_x);
    std::tie(y, gy_mult) = compute_H.apply_get_grad(grid_y);

    Vec n, s, w, e, nw, ne, sw, se, nw_mask, ne_mask, sw_mask, se_mask;
    iVec i_y_n, i_x_w;

    std::tie(
      n, s, w, e, nw, ne, sw, se, nw_mask, ne_mask, sw_mask, se_mask,
      i_y_n, i_x_w) = compute_interp_params(x, y);

    auto i_nw_offset = i_y_n * iVec(inp_sH) + i_x_w * iVec(inp_sW);
    auto i_ne_offset = i_nw_offset + iVec(inp_sW);
    auto i_sw_offset = i_nw_offset + iVec(inp_sH);
    auto i_se_offset = i_sw_offset + iVec(inp_sW);

    auto i_gInp_nw_offset = i_y_n * iVec(inp_W) + i_x_w;
    auto i_gInp_ne_offset = i_gInp_nw_offset + iVec(1);
    auto i_gInp_sw_offset = i_gInp_nw_offset + iVec(inp_W);
    auto i_gInp_se_offset = i_gInp_sw_offset + iVec(1);

    // When reading input values, we used mask_gather. Unfortunately, there is
    // no mask_scatter_add (the backward of mask_gather) in Intel intrinsics.
    // So we store the necessary vectors to temporary arrays and use the helper
    // mask_scatter_add defined above.

    integer_t i_gInp_nw_offset_arr[iVec::size()];
    integer_t i_gInp_ne_offset_arr[iVec::size()];
    integer_t i_gInp_sw_offset_arr[iVec::size()];
    integer_t i_gInp_se_offset_arr[iVec::size()];
    i_gInp_nw_offset.store(i_gInp_nw_offset_arr);
    i_gInp_ne_offset.store(i_gInp_ne_offset_arr);
    i_gInp_sw_offset.store(i_gInp_sw_offset_arr);
    i_gInp_se_offset.store(i_gInp_se_offset_arr);

    integer_t i_nw_mask_arr[iVec::size()];
    integer_t i_ne_mask_arr[iVec::size()];
    integer_t i_sw_mask_arr[iVec::size()];
    integer_t i_se_mask_arr[iVec::size()];
    nw_mask.store(i_nw_mask_arr);
    ne_mask.store(i_ne_mask_arr);
    sw_mask.store(i_sw_mask_arr);
    se_mask.store(i_se_mask_arr);

    scalar_t gInp_corner_arr[Vec::size()];

    auto gx = Vec(0), gy = Vec(0);
    #ifndef _MSC_VER
    # pragma unroll
    #endif
    for (int64_t c = 0; c < C; ++c) {
      auto inp_slice_C_ptr = inp_slice[c].data();
      auto gInp_slice_C_ptr = gInp_slice[c].data();
      auto gOut = Vec::loadu(gOut_slice[c].data() + offset, len);

      (nw * gOut).store(gInp_corner_arr);
      mask_scatter_add(gInp_corner_arr, gInp_slice_C_ptr, i_gInp_nw_offset_arr, i_nw_mask_arr, len);
      (ne * gOut).store(gInp_corner_arr);
      mask_scatter_add(gInp_corner_arr, gInp_slice_C_ptr, i_gInp_ne_offset_arr, i_ne_mask_arr, len);
      (sw * gOut).store(gInp_corner_arr);
      mask_scatter_add(gInp_corner_arr, gInp_slice_C_ptr, i_gInp_sw_offset_arr, i_sw_mask_arr, len);
      (se * gOut).store(gInp_corner_arr);
      mask_scatter_add(gInp_corner_arr, gInp_slice_C_ptr, i_gInp_se_offset_arr, i_se_mask_arr, len);

      // mask_gather zeros out the mask, so we need to make copies
      Vec nw_mask_copy = nw_mask;
      Vec ne_mask_copy = ne_mask;
      Vec sw_mask_copy = sw_mask;
      Vec se_mask_copy = se_mask;
      auto nw_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_nw_offset, nw_mask_copy);
      auto ne_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_ne_offset, ne_mask_copy);
      auto sw_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_sw_offset, sw_mask_copy);
      auto se_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_C_ptr, i_se_offset, se_mask_copy);

      gx = gx + ((ne_val - nw_val) * s + (se_val - sw_val) * n) * gOut;
      gy = gy + ((sw_val - nw_val) * e + (se_val - ne_val) * w) * gOut;
    }

    gx = gx * gx_mult;
    gy = gy * gy_mult;

    constexpr int64_t step = Vec::size();
    auto interleaved_gGrid = interleave2(gx, gy);
    auto gGrid_ptr = gGrid_slice.data() + offset * 2;
    std::get<0>(interleaved_gGrid).store(gGrid_ptr,
                                         std::min(len * 2, step));
    std::get<1>(interleaved_gGrid).store(gGrid_ptr + step,
                                         std::max(static_cast<int64_t>(0), len * 2 - step));
  }
};

template<typename scalar_t, GridSamplerPadding padding, bool align_corners>
struct ApplyGridSample<scalar_t, 2, GridSamplerInterpolation::Nearest,
                       padding, align_corners> {
  using Vec = Vec256<scalar_t>;
  using integer_t = int_same_size_t<scalar_t>;
  using iVec = Vec256<integer_t>;

  const int64_t inp_H;
  const int64_t inp_W;
  const int64_t inp_sH;
  const int64_t inp_sW;
  const int64_t C;
  const int64_t inp_sC;
  const ComputeLocation<scalar_t, padding, align_corners> compute_H;
  const ComputeLocation<scalar_t, padding, align_corners> compute_W;
  const bool must_in_bound = padding != GridSamplerPadding::Zeros;

  ApplyGridSample(const TensorAccessor<scalar_t, 4>& input)
    : inp_H(input.size(2))
    , inp_W(input.size(3))
    , inp_sH(input.stride(2))
    , inp_sW(input.stride(3))
    , C(input.size(1))
    , inp_sC(input.stride(1))
    , compute_H(input.size(2))
    , compute_W(input.size(3)) {}

  inline void forward(TensorAccessor<scalar_t, 3>& out_slice,
                      const TensorAccessor<scalar_t, 3>& inp_slice,
                      int64_t offset, const Vec& grid_x, const Vec& grid_y,
                      int64_t len) const {
    auto x = compute_W.apply(grid_x);
    auto y = compute_H.apply(grid_y);

    auto x_nearest = x.round();
    auto y_nearest = y.round();

    auto i_x_nearest = convert_to_int_of_same_size(x_nearest);
    auto i_y_nearest = convert_to_int_of_same_size(y_nearest);

    auto i_mask = must_in_bound ? iVec(-1)
                                : (i_x_nearest > iVec(-1)) & (i_x_nearest < iVec(inp_W)) &
                                  (i_y_nearest > iVec(-1)) & (i_y_nearest < iVec(inp_H));
    auto mask = cast<scalar_t>(i_mask);

    auto i_offset = i_y_nearest * iVec(inp_sH) + i_x_nearest * iVec(inp_sW);

    auto out_ptr = out_slice.data() + offset;
    auto out_sC = out_slice.stride(0);
    auto inp_slice_ptr = inp_slice.data();
    #ifndef _MSC_VER
    # pragma unroll
    #endif
    for (int c = 0; c < C; ++c, out_ptr += out_sC, inp_slice_ptr += inp_sC) {
      // mask_gather zeros out the mask, so we need to make a copy
      auto mask_copy = mask;
      auto inp_val = mask_gather<sizeof(scalar_t)>(Vec(0), inp_slice_ptr, i_offset, mask_copy);
      inp_val.store(static_cast<void*>(out_ptr), len);
    }
  }

  inline void backward(TensorAccessor<scalar_t, 3>& gInp_slice,
                       TensorAccessor<scalar_t, 3>& gGrid_slice,
                       const TensorAccessor<scalar_t, 3>& gOut_slice,
                       const TensorAccessor<scalar_t, 3>& inp_slice,
                       int64_t offset, const Vec& grid_x, const Vec& grid_y,
                       int64_t len) const {
    auto x = compute_W.apply(grid_x);
    auto y = compute_H.apply(grid_y);

    auto x_nearest = x.round();
    auto y_nearest = y.round();

    auto i_x_nearest = convert_to_int_of_same_size<scalar_t>(x_nearest);
    auto i_y_nearest = convert_to_int_of_same_size<scalar_t>(y_nearest);

    auto i_mask = must_in_bound ? iVec(-1)
                                : (i_x_nearest > iVec(-1)) & (i_x_nearest < iVec(inp_W)) &
                                  (i_y_nearest > iVec(-1)) & (i_y_nearest < iVec(inp_H));

    auto i_gInp_offset = i_y_nearest * iVec(inp_W) + i_x_nearest;  // gInp is contiguous

    integer_t mask_arr[iVec::size()];
    i_mask.store(mask_arr);
    integer_t gInp_offset_arr[iVec::size()];
    i_gInp_offset.store(gInp_offset_arr);

    #ifndef _MSC_VER
    # pragma unroll
    #endif
    for (int64_t c = 0; c < C; ++c) {
      mask_scatter_add(gOut_slice[c].data() + offset, gInp_slice[c].data(),
                       gInp_offset_arr, mask_arr, len);
    }

    // grid has zero 0 gradient in Nearest mode
    auto gGrid_ptr = gGrid_slice.data() + offset * 2;
    std::memset(gGrid_ptr, 0, sizeof(scalar_t) * len * 2);
  }
};

// ~~~~~~~~~~~~~~~~~~ grid_sample_2d_grid_slice_iterator ~~~~~~~~~~~~~~~~~~~~~~
// Function to apply a vectorized function on a grid slice tensor (without batch
// dimension).
// See NOTE [ Grid Sample CPU Kernels ] for details.

template<typename scalar_t, typename ApplyFn>
static inline void grid_sample_2d_grid_slice_iterator(
    const TensorAccessor<scalar_t, 3>& grid_slice, const ApplyFn &apply_fn) {
  int64_t out_H = grid_slice.size(0);
  int64_t out_W = grid_slice.size(1);
  int64_t grid_sH = grid_slice.stride(0);
  int64_t grid_sW = grid_slice.stride(1);
  int64_t grid_sCoor = grid_slice.stride(2);
  auto grid_ptr = grid_slice.data();

  using Vec = Vec256<scalar_t>;
  using iVec = Vec256<int_same_size_t<scalar_t>>;
  constexpr int64_t step = Vec::size();

  // Loop over each output pixel in grid.
  // We consider the following three cases (after slicing out the batch
  // dimension).
  // See detailed discussions under each if-case.

  if (at::geometry_is_contiguous({out_H, out_W, 2}, {grid_sH, grid_sW, grid_sCoor})) {
    // Case 1:
    // Grid is contiguous.
    // Strategy: Sequentially load two vectors at the same time, and get,
    //           e.g.,  {x0, y0, x1, y1}, {x2, y2, x3, y3}. Then we use
    //           at::vec256::deinterleave2 to get x and y vectors.
    auto total_size = out_H * out_W;
    for (int64_t spatial_offset = 0; spatial_offset < total_size; spatial_offset += step) {
      auto grid_offset = spatial_offset * 2;
      auto len = std::min(step, total_size - spatial_offset);
      auto vec1 = Vec::loadu(grid_ptr + grid_offset,
                             std::min(step, len * 2));
      auto vec2 = Vec::loadu(grid_ptr + grid_offset + step,
                             std::max(static_cast<int64_t>(0), len * 2 - step));
      auto vec_xy_pair = deinterleave2(vec1, vec2);

      auto x = std::get<0>(vec_xy_pair);
      auto y = std::get<1>(vec_xy_pair);

      // make sure that x and y are valid grid sample locations
      if (len < step) {
        x = Vec::set(Vec(0), x, len);
        y = Vec::set(Vec(0), y, len);
      }
      apply_fn(x, y, spatial_offset, len);
    }
  } else if (grid_sW == 1 || out_W == 1) {
    // Case 2:
    // The W dimension is contiguous.
    // This can be common, e.g., grid is from a conv net output of shape
    // [N, 2, H, W].
    // Strategy: Divide into two contiguous slices each of shape [H, W], and
    //           each containing x and y vectors. So we sequentially load a
    //           vector from each of them to get x and y vector

    // Function to apply along a contiguous W dimension (or flattened H x W).
    auto line_fn = [&](const scalar_t *grid_ptr_x, const scalar_t *grid_ptr_y,
                       int64_t out_base_offset, int64_t total_size) {
      for (int64_t i = 0; i < total_size; i += step) {
        auto len = std::min(step, total_size - i);
        auto x = Vec::loadu(grid_ptr_x + i, len);
        auto y = Vec::loadu(grid_ptr_y + i, len);
        // make sure that x and y are valid grid sample locations
        if (len < step) {
          x = Vec::set(Vec(0), x, len);
          y = Vec::set(Vec(0), y, len);
        }
        apply_fn(x, y, out_base_offset + i, len);
      }
    };

    if (at::geometry_is_contiguous({out_H, out_W}, {grid_sH, grid_sW})) {
      // If [H, W] is contiguous, apply line_fn once.
      line_fn(grid_ptr, grid_ptr + grid_sCoor, 0, out_H * out_W);
    } else {
      // If only [W] is contiguous, apply line_fn once for each h slice.
      auto grid_ptr_NH = grid_ptr;
      for (int64_t h = 0; h < out_H; h++) {
        line_fn(grid_ptr_NH, grid_ptr_NH + grid_sCoor, h * out_W, out_W);
        grid_ptr_NH += grid_sH;
      }
    }
  } else {
    // Case 3:
    // General case.
    // Strategy: Do a for-loop over H, for each W slice, use
    //           at::vec256::gather to load the x and y vectors.
    auto spatial_offset = 0;
    auto i_offsets_delta = iVec(grid_sW * step);

    #ifndef _MSC_VER
    # pragma unroll
    #endif
    for (int64_t h = 0; h < out_H; h++) {
      auto grid_ptr_x = grid_ptr + h * grid_sH;
      auto grid_ptr_y = grid_ptr_x + grid_sCoor;
      auto i_offsets = iVec::arange(0, grid_sW);
      #ifndef _MSC_VER
      # pragma unroll
      #endif
      for (int64_t w = 0; w < out_W; w += step) {
        auto len = std::min(step, out_W - w);
        if (len < step) {
          // prevents illegal memory access, sets the exceeding offsets to zero
          i_offsets = iVec::set(iVec(0), i_offsets, len);
        }
        apply_fn(vec256::gather<sizeof(scalar_t)>(grid_ptr_x, i_offsets),
                 vec256::gather<sizeof(scalar_t)>(grid_ptr_y, i_offsets),
                 spatial_offset, len);

        i_offsets = i_offsets + i_offsets_delta;
        spatial_offset += len;
      }
    }
  }
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~ Grid Sample Kernels ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Use the structs & functions defined above to calculate grid sample forward
// and backward.
// See NOTE [ Grid Sample CPU Kernels ] for details.

Tensor grid_sampler_2d_cpu_kernel_impl(const Tensor& input, const Tensor& grid,
                                       int64_t interpolation_mode,
                                       int64_t padding_mode, bool align_corners) {
  auto N = input.size(0);
  auto H = grid.size(1);
  auto W = grid.size(2);
  auto output = at::empty({N, input.size(1), H, W}, input.options());
  auto spatial_size = H * W;
  auto grain_size = spatial_size == 0 ? (N + 1)
                                      : at::divup(at::internal::GRAIN_SIZE, spatial_size * 4 /* 2d * 2 tensors*/);

#define HANDLE_CASE(interp, padding, align_corners)                            \
  case padding: {                                                              \
    ApplyGridSample<scalar_t, 2, interp, padding, align_corners>               \
    grid_sample(inp_acc);                                                      \
    parallel_for(0, N, grain_size, [&](int64_t begin, int64_t end) {           \
      for (int64_t n = begin; n < end; n++) {                                  \
        auto out_slice = out_acc[n];                                           \
        auto inp_slice = inp_acc[n];                                           \
        grid_sample_2d_grid_slice_iterator(                                    \
          grid_acc[n],                                                         \
          [&](const Vec256<scalar_t>& grid_x, const Vec256<scalar_t>& grid_y,  \
              int64_t spatial_offset, int64_t len) {                           \
            grid_sample.forward(out_slice, inp_slice, spatial_offset,          \
                                grid_x, grid_y, len);                          \
          });                                                                  \
        }                                                                      \
      });                                                                      \
    return;                                                                    \
  }

#define HANDLE_INTERP(interp, align_corners)                                   \
  case interp: {                                                               \
    switch (static_cast<GridSamplerPadding>(padding_mode)) {                   \
      HANDLE_CASE(interp, GridSamplerPadding::Zeros, align_corners);           \
      HANDLE_CASE(interp, GridSamplerPadding::Border, align_corners);          \
      HANDLE_CASE(interp, GridSamplerPadding::Reflection, align_corners);      \
    }                                                                          \
    return;                                                                    \
  }

  AT_DISPATCH_FLOATING_TYPES(input.scalar_type(), "grid_sampler_2d_cpu_kernel_impl", [&] {
    auto out_acc = output.accessor<scalar_t, 4>();
    auto inp_acc = input.accessor<scalar_t, 4>();
    auto grid_acc = grid.accessor<scalar_t, 4>();
    if (align_corners) {
      switch (static_cast<GridSamplerInterpolation>(interpolation_mode)) {
        HANDLE_INTERP(GridSamplerInterpolation::Bilinear, true);
        HANDLE_INTERP(GridSamplerInterpolation::Nearest, true);
      }
    } else {
      switch (static_cast<GridSamplerInterpolation>(interpolation_mode)) {
        HANDLE_INTERP(GridSamplerInterpolation::Bilinear, false);
        HANDLE_INTERP(GridSamplerInterpolation::Nearest, false);
      }
    }
  });
#undef HANDLE_CASE
#undef HANDLE_INTERP

  return output;
}

std::tuple<Tensor, Tensor>
grid_sampler_2d_backward_cpu_kernel_impl(const Tensor& grad_output_,
                                         const Tensor& input,
                                         const Tensor& grid,
                                         int64_t interpolation_mode,
                                         int64_t padding_mode,
                                         bool align_corners) {
  // grad_output should be contiguous most of time. Ensuring that it is
  // contiguous can greatly simplify this code.
  auto grad_output = grad_output_.contiguous();

  auto grad_input = at::zeros_like(input, LEGACY_CONTIGUOUS_MEMORY_FORMAT);
  auto grad_grid = at::empty_like(grid, LEGACY_CONTIGUOUS_MEMORY_FORMAT);
  auto N = input.size(0);
  auto spatial_size = grid.size(1) * grid.size(2);
  auto grain_size = spatial_size == 0 ? (N + 1)
                                      : at::divup(at::internal::GRAIN_SIZE, spatial_size * 10 /* 2d * 5 tensors*/);

#define HANDLE_CASE(interp, padding, align_corners)                              \
  case padding: {                                                                \
    ApplyGridSample<scalar_t, 2, interp, padding, align_corners>                 \
    grid_sample(inp_acc);                                                        \
    parallel_for(0, N, grain_size, [&](int64_t begin, int64_t end) {             \
      for (int64_t n = begin; n < end; n++) {                                    \
        auto gInp_slice = gInp_acc[n];                                           \
        auto gGrid_slice = gGrid_acc[n];                                         \
        auto gOut_slice = gOut_acc[n];                                           \
        auto inp_slice = inp_acc[n];                                             \
        grid_sample_2d_grid_slice_iterator(                                      \
          grid_acc[n],                                                           \
          [&](const Vec256<scalar_t>& grid_x, const Vec256<scalar_t>& grid_y,    \
              int64_t spatial_offset, int64_t len) {                             \
            grid_sample.backward(gInp_slice, gGrid_slice, gOut_slice, inp_slice, \
                                 spatial_offset, grid_x, grid_y, len);           \
          });                                                                    \
      }                                                                          \
    });                                                                          \
    return;                                                                      \
  }

#define HANDLE_INTERP(interp, align_corners)                                \
  case interp: {                                                            \
    switch (static_cast<GridSamplerPadding>(padding_mode)) {                \
      HANDLE_CASE(interp, GridSamplerPadding::Zeros, align_corners);        \
      HANDLE_CASE(interp, GridSamplerPadding::Border, align_corners);       \
      HANDLE_CASE(interp, GridSamplerPadding::Reflection, align_corners);   \
    }                                                                       \
    return;                                                                 \
  }

  AT_DISPATCH_FLOATING_TYPES(input.scalar_type(), "grid_sampler_2d_backward_cpu_kernel_impl", [&] {
    auto gInp_acc = grad_input.accessor<scalar_t, 4>();
    auto gGrid_acc = grad_grid.accessor<scalar_t, 4>();
    auto inp_acc = input.accessor<scalar_t, 4>();
    auto grid_acc = grid.accessor<scalar_t, 4>();
    auto gOut_acc = grad_output.accessor<scalar_t, 4>();
    if (align_corners) {
      switch (static_cast<GridSamplerInterpolation>(interpolation_mode)) {
        HANDLE_INTERP(GridSamplerInterpolation::Bilinear, true);
        HANDLE_INTERP(GridSamplerInterpolation::Nearest, true);
      }
    } else {
      switch (static_cast<GridSamplerInterpolation>(interpolation_mode)) {
        HANDLE_INTERP(GridSamplerInterpolation::Bilinear, false);
        HANDLE_INTERP(GridSamplerInterpolation::Nearest, false);
      }
    }
  });
#undef HANDLE_CASE
#undef HANDLE_INTERP

  return std::make_tuple(grad_input, grad_grid);
}

}

REGISTER_DISPATCH(grid_sampler_2d_cpu_kernel, &grid_sampler_2d_cpu_kernel_impl);
REGISTER_DISPATCH(grid_sampler_2d_backward_cpu_kernel, &grid_sampler_2d_backward_cpu_kernel_impl);


}}  // namespace at::native