diff --git a/.gitignore b/.gitignore
index 17012a9..3af64a4 100644
--- a/.gitignore
+++ b/.gitignore
@@ -4,4 +4,8 @@ build/
 source/build*
 notes/
 examples/*.cpp
-examples/*.h
\ No newline at end of file
+examples/*.h
+help/*.cpp
+help/*.h
+templates/*.cpp
+templates/*.h
\ No newline at end of file
diff --git a/README.md b/README.md
index e6df19f..4c00e61 100644
--- a/README.md
+++ b/README.md
@@ -6,7 +6,7 @@ Each Daisy binary can hold several gen~ patcher "apps", which can be switched be
 
 ## How gen~ features map to Daisy
 
-Mostly this works by adding an appropriate name to the `in`, `out`, and `param` objects.
+Mostly this works by adding an appropriate name to the `in`, `out`, and `param` objects, but many features will also auto-map without special naming.
 
 ### Audio
 
@@ -20,7 +20,7 @@ Hardware voltages are mapped to gen~ -1..1
   
 ### CV/Gate/Knobs/Switches etc.
 
-- `param cv1`, `param gate2`, `param knob1`, `param key2`  etc. will give you the CV and gate inputs, hardware knobs, keys, etc. Use `@min` and `@max` to remap the normalized ranges. Use `@min` and `@max` to remap normalized ranges as desired. 
+- `param cv1`, `param gate2`, `param knob1`, `param key2`, `param knob_delay`, `param switch_enable` etc. will give you the CV and gate inputs, hardware knobs, keys, etc. Use `@min` and `@max` to remap the normalized ranges. Use `@min` and `@max` to remap normalized ranges as desired. 
 - Oopsy will try to auto-map any other `param` objects to any unused Knob/CV inputs.
 - `out <n> cv1`, `out <n> gate2`, etc. will send the signal to corresponding CV or Gate outputs if the device has them. `<n>` just needs to be an output channel number that isn't being used for anything else. 
 - CV/gate inputs and outputs are sampled at block rate, which on the default configuration of the Daisy is every 48 samples = 1ms. Trigger/gates shorter than 1-2ms might be missed.
diff --git a/code/oopsy.ctrl.smooth2.gendsp b/code/oopsy.ctrl.smooth2.gendsp
new file mode 100644
index 0000000..e26e7f3
--- /dev/null
+++ b/code/oopsy.ctrl.smooth2.gendsp
@@ -0,0 +1,269 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "dsp.gen",
+		"rect" : [ 84.0, 103.0, 466.0, 288.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-15",
+					"linecount" : 8,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 254.0, 61.0, 150.0, 114.0 ],
+					"text" : "A 2-pole lowpass filter at 10Hz seems to effectively silence noise from hardware input ADCs.\n\nBut a 10Hz filter might be too slow to respond, if so, try the smooth3 option."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-8",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 118.0, 193.0, 46.0, 23.0 ],
+					"text" : "mix"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-9",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 118.0, 153.0, 45.0, 23.0 ],
+					"text" : "history"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-4",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 118.0, 239.0, 37.0, 23.0 ],
+					"text" : "out 1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-6",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 44.0, 193.0, 46.0, 23.0 ],
+					"text" : "mix"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-10",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 127.5, 53.0, 109.0, 23.0 ],
+					"text" : "* twopi/samplerate"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-14",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 44.0, 153.0, 45.0, 23.0 ],
+					"text" : "history"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-5",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 127.5, 84.0, 26.0, 23.0 ],
+					"text" : "sin"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-1",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 57.5, 84.0, 28.0, 23.0 ],
+					"text" : "in 1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-2",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 127.5, 23.0, 22.0, 23.0 ],
+					"text" : "10"
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-6", 1 ],
+					"source" : [ "obj-1", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-5", 0 ],
+					"source" : [ "obj-10", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-6", 0 ],
+					"source" : [ "obj-14", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-10", 0 ],
+					"source" : [ "obj-2", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-6", 2 ],
+					"midpoints" : [ 137.0, 121.5, 80.5, 121.5 ],
+					"order" : 1,
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-8", 2 ],
+					"midpoints" : [ 137.0, 122.5, 154.5, 122.5 ],
+					"order" : 0,
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-14", 0 ],
+					"midpoints" : [ 53.5, 222.0, 31.5, 222.0, 31.5, 141.0, 53.5, 141.0 ],
+					"order" : 1,
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-8", 1 ],
+					"order" : 0,
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-4", 0 ],
+					"order" : 0,
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-9", 0 ],
+					"midpoints" : [ 127.5, 222.0, 105.5, 222.0, 105.5, 141.0, 127.5, 141.0 ],
+					"order" : 1,
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-8", 0 ],
+					"source" : [ "obj-9", 0 ]
+				}
+
+			}
+ ]
+	}
+
+}
diff --git a/code/oopsy.ctrl.smooth3.gendsp b/code/oopsy.ctrl.smooth3.gendsp
new file mode 100644
index 0000000..9cb3de8
--- /dev/null
+++ b/code/oopsy.ctrl.smooth3.gendsp
@@ -0,0 +1,331 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "dsp.gen",
+		"rect" : [ 84.0, 103.0, 466.0, 288.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-15",
+					"linecount" : 13,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 276.0, 35.0, 150.0, 181.0 ],
+					"text" : "A 3-pole lowpass filter at 30Hz seems to effectively silence any noise from hardware input ADCs.\n\nMost of the time this level of aggressive smoothing is probably unnecessary, but for some applications that are very sensitive (e.g. setting long delay line lengths) it might be needed."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-11",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 190.5, 193.0, 46.0, 23.0 ],
+					"text" : "mix"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-12",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 190.5, 153.0, 45.0, 23.0 ],
+					"text" : "history"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-8",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 118.0, 193.0, 46.0, 23.0 ],
+					"text" : "mix"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-9",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 118.0, 153.0, 45.0, 23.0 ],
+					"text" : "history"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-4",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 190.5, 240.0, 37.0, 23.0 ],
+					"text" : "out 1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-6",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 44.0, 193.0, 46.0, 23.0 ],
+					"text" : "mix"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-10",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 127.5, 53.0, 109.0, 23.0 ],
+					"text" : "* twopi/samplerate"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-14",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 44.0, 153.0, 45.0, 23.0 ],
+					"text" : "history"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-5",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 127.5, 84.0, 26.0, 23.0 ],
+					"text" : "sin"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-1",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 57.5, 84.0, 28.0, 23.0 ],
+					"text" : "in 1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Lato",
+					"fontsize" : 12.0,
+					"id" : "obj-2",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 127.5, 23.0, 22.0, 23.0 ],
+					"text" : "30"
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-6", 1 ],
+					"source" : [ "obj-1", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-5", 0 ],
+					"source" : [ "obj-10", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-12", 0 ],
+					"midpoints" : [ 200.0, 222.0, 178.0, 222.0, 178.0, 141.0, 200.0, 141.0 ],
+					"order" : 1,
+					"source" : [ "obj-11", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-4", 0 ],
+					"order" : 0,
+					"source" : [ "obj-11", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 0 ],
+					"source" : [ "obj-12", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-6", 0 ],
+					"source" : [ "obj-14", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-10", 0 ],
+					"source" : [ "obj-2", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 2 ],
+					"midpoints" : [ 137.0, 123.5, 227.0, 123.5 ],
+					"order" : 0,
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-6", 2 ],
+					"midpoints" : [ 137.0, 121.5, 80.5, 121.5 ],
+					"order" : 2,
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-8", 2 ],
+					"midpoints" : [ 137.0, 122.5, 154.5, 122.5 ],
+					"order" : 1,
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-14", 0 ],
+					"midpoints" : [ 53.5, 222.0, 31.5, 222.0, 31.5, 141.0, 53.5, 141.0 ],
+					"order" : 1,
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-8", 1 ],
+					"order" : 0,
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 1 ],
+					"order" : 0,
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-9", 0 ],
+					"midpoints" : [ 127.5, 222.0, 105.5, 222.0, 105.5, 141.0, 127.5, 141.0 ],
+					"order" : 1,
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-8", 0 ],
+					"source" : [ "obj-9", 0 ]
+				}
+
+			}
+ ],
+		"autosave" : 0
+	}
+
+}
diff --git a/code/oopsy.cv2hz.gendsp b/code/oopsy.cv2hz.gendsp
new file mode 100644
index 0000000..49d76ce
--- /dev/null
+++ b/code/oopsy.cv2hz.gendsp
@@ -0,0 +1,236 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "dsp.gen",
+		"rect" : [ 742.0, 324.0, 764.0, 299.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-1",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 536.0, 20.0, 71.0, 22.0 ],
+					"text" : "in 2 register"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-33",
+					"linecount" : 2,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 551.0, 50.0, 187.0, 33.0 ],
+					"text" : "add integer here to shift register (default 3v = C4 MIDI 60"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-29",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 489.0, 121.0, 150.0, 20.0 ],
+					"text" : "chroma rotate A->C (3/12)"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-24",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 444.0, 121.0, 42.0, 22.0 ],
+					"text" : "+ 0.25"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-25",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 421.0, 121.0, 19.0, 22.0 ],
+					"text" : "2"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-26",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 421.0, 150.0, 42.0, 22.0 ],
+					"text" : "pow"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-27",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 421.0, 179.0, 40.0, 22.0 ],
+					"text" : "* 27.5"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-15",
+					"linecount" : 14,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 23.0, 20.0, 354.0, 194.0 ],
+					"text" : "CV to Hz is somewhat arbitrary, with a variety of conventions in wide use. \n\nOne widespread convention is that adding one volt will increase pitch by one octave (every 2^1/12 volt is a semitone), which is implemented here. The base tuning of an integer voltage is mostly a \"C\", which is also implemented here, but see https://learningmodular.com/matching-octaves-in-your-modular to see how much the register can vary in hardware;  0v, 1v, 2v and 3v are all widespread tunings for MIDI note 60 (C4) for example.\n\nYou can shift the register simply by adding an integer to the input CV.  Here we chose 3v == C4/MIDI 60 as a default."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-41",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 444.0, 72.0, 29.5, 22.0 ],
+					"text" : "+"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-40",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 489.0, 179.0, 150.0, 20.0 ],
+					"text" : "frequency of MIDI A0"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-12",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 444.0, 20.0, 75.0, 22.0 ],
+					"text" : "in 1 pitch_cv"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-13",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 421.0, 252.0, 53.0, 22.0 ],
+					"text" : "out 1 Hz"
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-41", 1 ],
+					"midpoints" : [ 545.5, 54.0, 464.0, 54.0 ],
+					"source" : [ "obj-1", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-41", 0 ],
+					"source" : [ "obj-12", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-26", 1 ],
+					"source" : [ "obj-24", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-26", 0 ],
+					"source" : [ "obj-25", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-27", 0 ],
+					"source" : [ "obj-26", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 0 ],
+					"source" : [ "obj-27", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-24", 0 ],
+					"source" : [ "obj-41", 0 ]
+				}
+
+			}
+ ]
+	}
+
+}
diff --git a/code/oopsy.gate.min.gendsp b/code/oopsy.gate.min.gendsp
new file mode 100644
index 0000000..1e34dd8
--- /dev/null
+++ b/code/oopsy.gate.min.gendsp
@@ -0,0 +1,285 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "dsp.gen",
+		"rect" : [ 84.0, 103.0, 658.0, 409.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-5",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 108.25, 267.0, 70.0, 22.0 ],
+					"text" : "mstosamps"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-4",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 108.25, 291.0, 89.0, 22.0 ],
+					"text" : "max vectorsize"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-3",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 108.25, 243.0, 62.0, 22.0 ],
+					"text" : "param ms"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-1",
+					"linecount" : 10,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 376.25, 130.0, 230.0, 141.0 ],
+					"text" : "This subpatcher will extend any short click or gate (positive non-zero values) at least one signal vector's worth.\n\nThis may be necessary to ensure that any very short gates are not 'missed' by the GPIO output handling of the hardware (or indeed by any other hardware unable to register very short gates). "
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-41",
+					"linecount" : 4,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 112.25, 319.0, 196.0, 60.0 ],
+					"text" : "keep gate high until 1+ control vectors have passed. On Daisy with the default blockrate of 1kHz this implies 1ms."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-40",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 108.25, 195.0, 229.0, 20.0 ],
+					"text" : "Reset sample counter on rising edge"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-37",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 108.25, 133.5, 229.0, 20.0 ],
+					"text" : "Detect rising edge"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-36",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 108.25, 102.0, 229.0, 20.0 ],
+					"text" : "Basic daisy gate logic (gate high if > 0)"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-34",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 333.0, 29.5, 22.0 ],
+					"text" : "<="
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-32",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 195.0, 33.0, 22.0 ],
+					"text" : "+= 1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-31",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 160.5, 26.0, 22.0 ],
+					"text" : "> 0"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-30",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 133.5, 48.0, 22.0 ],
+					"text" : "change"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-27",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 100.0, 26.0, 22.0 ],
+					"text" : "> 0"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-43",
+					"maxclass" : "newobj",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 40.0, 28.0, 22.0 ],
+					"text" : "in 1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-44",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 50.25, 357.0, 35.0, 22.0 ],
+					"text" : "out 1"
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-30", 0 ],
+					"source" : [ "obj-27", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-5", 0 ],
+					"source" : [ "obj-3", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-31", 0 ],
+					"source" : [ "obj-30", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-32", 0 ],
+					"source" : [ "obj-31", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-34", 0 ],
+					"source" : [ "obj-32", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-44", 0 ],
+					"source" : [ "obj-34", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-34", 1 ],
+					"source" : [ "obj-4", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-27", 0 ],
+					"source" : [ "obj-43", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-4", 0 ],
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+ ],
+		"autosave" : 0
+	}
+
+}
diff --git a/code/gen2daisy.midiformat.gendsp b/code/oopsy.midi.format.gendsp
similarity index 100%
rename from code/gen2daisy.midiformat.gendsp
rename to code/oopsy.midi.format.gendsp
diff --git a/code/gen2daisy.midiparse.gendsp b/code/oopsy.midi.parse.gendsp
similarity index 100%
rename from code/gen2daisy.midiparse.gendsp
rename to code/oopsy.midi.parse.gendsp
diff --git a/code/oopsy.suggestions.gendsp b/code/oopsy.suggestions.gendsp
new file mode 100644
index 0000000..ed1bcef
--- /dev/null
+++ b/code/oopsy.suggestions.gendsp
@@ -0,0 +1,106 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "dsp.gen",
+		"rect" : [ 84.0, 103.0, 640.0, 480.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-3",
+					"linecount" : 4,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 50.0, 235.0, 404.0, 60.0 ],
+					"presentation_linecount" : 4,
+					"text" : "Similarly, output gates that are shorter than 1ms may be missed, because of control-rate sampling. This subpatcher ensures even a single-sample click will be extended to the minimum gate duration for the hardware (1ms by default):"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-2",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 297.0, 89.0, 22.0 ],
+					"text" : "oopsy.gate.min"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-1",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 170.0, 166.5, 108.0, 22.0 ],
+					"text" : "oopsy.ctrl.smooth3"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-32",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 50.0, 166.5, 108.0, 22.0 ],
+					"text" : "oopsy.ctrl.smooth2"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-22",
+					"linecount" : 4,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 50.0, 100.0, 404.0, 60.0 ],
+					"text" : "Note that CV/knob inputs update at block-rate, which is by default 1ms for Daisy. You may want to add some filtering or smoothing to CVs, depending on how they are being used in the patch. Here are some options:"
+				}
+
+			}
+ ],
+		"lines" : [  ]
+	}
+
+}
diff --git a/examples/midi_io.maxpat b/examples/midi_io.maxpat
index 7454750..9e29a5b 100644
--- a/examples/midi_io.maxpat
+++ b/examples/midi_io.maxpat
@@ -39,6 +39,25 @@
 		"subpatcher_template" : "",
 		"assistshowspatchername" : 0,
 		"boxes" : [ 			{
+				"box" : 				{
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-13",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 25.0, 88.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
 				"box" : 				{
 					"id" : "obj-6",
 					"lastchannelcount" : 0,
@@ -73,29 +92,6 @@
 					"patching_rect" : [ 29.333333333333343, 532.0, 45.0, 45.0 ]
 				}
 
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-18",
-					"maxclass" : "button",
-					"numinlets" : 1,
-					"numoutlets" : 1,
-					"outlettype" : [ "bang" ],
-					"parameter_enable" : 0,
-					"patching_rect" : [ 590.0, 446.0, 74.0, 74.0 ]
-				}
-
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-14",
-					"maxclass" : "newobj",
-					"numinlets" : 1,
-					"numoutlets" : 0,
-					"patching_rect" : [ 590.0, 537.0, 41.0, 22.0 ],
-					"text" : "oopsy"
-				}
-
 			}
 , 			{
 				"box" : 				{
@@ -3034,7 +3030,7 @@
 									"numoutlets" : 25,
 									"outlettype" : [ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "" ],
 									"patching_rect" : [ 55.0, 185.0, 271.0, 22.0 ],
-									"text" : "gen2daisy.midiparse"
+									"text" : "oopsy.midi.parse"
 								}
 
 							}
@@ -3426,7 +3422,7 @@
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
 									"patching_rect" : [ 508.0, 185.0, 166.0, 22.0 ],
-									"text" : "gen2daisy.midiformat"
+									"text" : "oopsy.midi.format"
 								}
 
 							}
@@ -3558,7 +3554,7 @@
 						"exportname" : "midi_io"
 					}
 ,
-					"text" : "gen~ @title midi_io",
+					"text" : "gen~",
 					"textcolor" : [ 0.996078431372549, 0.996078431372549, 0.996078431372549, 1.0 ],
 					"varname" : "midi_io"
 				}
@@ -3613,13 +3609,6 @@
 					"source" : [ "obj-17", 0 ]
 				}
 
-			}
-, 			{
-				"patchline" : 				{
-					"destination" : [ "obj-14", 0 ],
-					"source" : [ "obj-18", 0 ]
-				}
-
 			}
 , 			{
 				"patchline" : 				{
@@ -3697,6 +3686,8 @@
 			}
  ],
 		"parameters" : 		{
+			"obj-13::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-13::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
 			"obj-6" : [ "live.gain~", "live.gain~", 0 ],
 			"parameterbanks" : 			{
 
@@ -3706,14 +3697,14 @@
 		}
 ,
 		"dependency_cache" : [ 			{
-				"name" : "gen2daisy.midiparse.gendsp",
+				"name" : "oopsy.midi.format.gendsp",
 				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
 				"patcherrelativepath" : "../code",
 				"type" : "gDSP",
 				"implicit" : 1
 			}
 , 			{
-				"name" : "gen2daisy.midiformat.gendsp",
+				"name" : "oopsy.midi.parse.gendsp",
 				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
 				"patcherrelativepath" : "../code",
 				"type" : "gDSP",
diff --git a/examples/lrmsmslr.maxpat b/examples/midside.maxpat
similarity index 74%
rename from examples/lrmsmslr.maxpat
rename to examples/midside.maxpat
index 9c8e96d..c91d084 100644
--- a/examples/lrmsmslr.maxpat
+++ b/examples/midside.maxpat
@@ -10,7 +10,7 @@
 		}
 ,
 		"classnamespace" : "box",
-		"rect" : [ 59.0, 78.0, 396.0, 613.0 ],
+		"rect" : [ 59.0, 78.0, 586.0, 640.0 ],
 		"bglocked" : 0,
 		"openinpresentation" : 0,
 		"default_fontsize" : 12.0,
@@ -40,25 +40,20 @@
 		"assistshowspatchername" : 0,
 		"boxes" : [ 			{
 				"box" : 				{
-					"id" : "obj-6",
-					"maxclass" : "message",
-					"numinlets" : 2,
-					"numoutlets" : 1,
-					"outlettype" : [ "" ],
-					"patching_rect" : [ 49.0, 219.0, 68.0, 22.0 ],
-					"text" : "exportcode"
-				}
-
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-7",
-					"linecount" : 3,
-					"maxclass" : "comment",
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 162.0, 272.0, 150.0, 47.0 ],
-					"text" : "Inspired by the Worng Electronics device of the same name."
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 298.0, 26.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
 				}
 
 			}
@@ -106,7 +101,7 @@
 						}
 ,
 						"classnamespace" : "dsp.gen",
-						"rect" : [ 397.0, 78.0, 634.0, 454.0 ],
+						"rect" : [ 761.0, 119.0, 634.0, 454.0 ],
 						"bglocked" : 0,
 						"openinpresentation" : 0,
 						"default_fontsize" : 12.0,
@@ -135,13 +130,25 @@
 						"subpatcher_template" : "",
 						"assistshowspatchername" : 0,
 						"boxes" : [ 							{
+								"box" : 								{
+									"id" : "obj-14",
+									"linecount" : 3,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 334.0, 183.0, 150.0, 47.0 ],
+									"text" : "A really basic patch for mid-side stereo conversion"
+								}
+
+							}
+, 							{
 								"box" : 								{
 									"id" : "obj-11",
 									"maxclass" : "newobj",
 									"numinlets" : 1,
 									"numoutlets" : 0,
-									"patching_rect" : [ 247.5, 241.0, 45.0, 22.0 ],
-									"text" : "out 4"
+									"patching_rect" : [ 221.0, 249.0, 47.0, 22.0 ],
+									"text" : "out 4 R"
 								}
 
 							}
@@ -151,8 +158,8 @@
 									"maxclass" : "newobj",
 									"numinlets" : 1,
 									"numoutlets" : 0,
-									"patching_rect" : [ 200.0, 241.0, 45.0, 22.0 ],
-									"text" : "out 3"
+									"patching_rect" : [ 168.0, 249.0, 45.0, 22.0 ],
+									"text" : "out 3 L"
 								}
 
 							}
@@ -163,7 +170,7 @@
 									"numinlets" : 2,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 247.5, 175.0, 39.5, 22.0 ],
+									"patching_rect" : [ 221.0, 183.0, 39.5, 22.0 ],
 									"text" : "-"
 								}
 
@@ -175,7 +182,7 @@
 									"numinlets" : 1,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 200.0, 175.0, 32.0, 22.0 ],
+									"patching_rect" : [ 168.0, 183.0, 32.0, 22.0 ],
 									"text" : "/ 2"
 								}
 
@@ -186,8 +193,8 @@
 									"maxclass" : "newobj",
 									"numinlets" : 1,
 									"numoutlets" : 0,
-									"patching_rect" : [ 110.5, 241.0, 45.0, 22.0 ],
-									"text" : "out 2"
+									"patching_rect" : [ 84.0, 249.0, 47.0, 22.0 ],
+									"text" : "out 2 S"
 								}
 
 							}
@@ -197,8 +204,8 @@
 									"maxclass" : "newobj",
 									"numinlets" : 1,
 									"numoutlets" : 0,
-									"patching_rect" : [ 63.0, 241.0, 45.0, 22.0 ],
-									"text" : "out 1"
+									"patching_rect" : [ 31.0, 249.0, 49.0, 22.0 ],
+									"text" : "out 1 M"
 								}
 
 							}
@@ -209,7 +216,7 @@
 									"numinlets" : 2,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 110.5, 175.0, 39.5, 22.0 ],
+									"patching_rect" : [ 84.0, 183.0, 39.5, 22.0 ],
 									"text" : "-"
 								}
 
@@ -221,7 +228,7 @@
 									"numinlets" : 1,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 63.0, 175.0, 32.0, 22.0 ],
+									"patching_rect" : [ 31.0, 183.0, 32.0, 22.0 ],
 									"text" : "/ 2"
 								}
 
@@ -233,8 +240,8 @@
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 258.0, 117.0, 38.0, 22.0 ],
-									"text" : "in 4"
+									"patching_rect" : [ 241.5, 125.0, 39.0, 22.0 ],
+									"text" : "in 4 S"
 								}
 
 							}
@@ -245,8 +252,8 @@
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 200.0, 117.0, 38.0, 22.0 ],
-									"text" : "in 3"
+									"patching_rect" : [ 168.0, 125.0, 41.0, 22.0 ],
+									"text" : "in 3 M"
 								}
 
 							}
@@ -257,8 +264,8 @@
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 121.0, 117.0, 38.0, 22.0 ],
-									"text" : "in 2"
+									"patching_rect" : [ 104.5, 125.0, 40.0, 22.0 ],
+									"text" : "in 2 R"
 								}
 
 							}
@@ -269,8 +276,8 @@
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 63.0, 117.0, 38.0, 22.0 ],
-									"text" : "in 1"
+									"patching_rect" : [ 31.0, 125.0, 38.0, 22.0 ],
+									"text" : "in 1 L"
 								}
 
 							}
@@ -370,15 +377,14 @@
  ]
 					}
 ,
-					"patching_rect" : [ 24.0, 272.0, 118.0, 22.0 ],
+					"patching_rect" : [ 24.0, 272.0, 50.5, 22.0 ],
 					"saved_object_attributes" : 					{
 						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/examples/",
-						"exportname" : "lrmsmslr",
-						"exportnotifier" : "1203_ged_export"
+						"exportname" : "midside"
 					}
 ,
-					"text" : "gen~ @title lrmsmslr",
-					"varname" : "lrmsmslr"
+					"text" : "gen~",
+					"varname" : "midside"
 				}
 
 			}
@@ -387,11 +393,12 @@
 					"fontname" : "Arial Bold Italic",
 					"fontsize" : 24.0,
 					"id" : "obj-3",
+					"linecount" : 2,
 					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 24.0, 26.0, 261.0, 33.0 ],
-					"text" : "Mid-Side converter"
+					"patching_rect" : [ 24.0, 26.0, 261.0, 60.0 ],
+					"text" : "Mid-Side Stereo Conversion"
 				}
 
 			}
@@ -426,25 +433,52 @@
 					"source" : [ "obj-4", 0 ]
 				}
 
-			}
-, 			{
-				"patchline" : 				{
-					"destination" : [ "obj-1", 0 ],
-					"source" : [ "obj-6", 0 ]
-				}
-
 			}
  ],
 		"parameters" : 		{
 			"obj-4" : [ "live.gain~", "live.gain~", 0 ],
+			"obj-9::obj-32" : [ "live.text[4]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
 			"parameterbanks" : 			{
 
+			}
+,
+			"parameter_overrides" : 			{
+				"obj-9::obj-32" : 				{
+					"parameter_longname" : "live.text[4]"
+				}
+,
+				"obj-9::obj-36" : 				{
+					"parameter_longname" : "live.menu[1]"
+				}
+
 			}
 ,
 			"inherited_shortname" : 1
 		}
 ,
-		"dependency_cache" : [  ],
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.maxpat",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
+				"patcherrelativepath" : "../patchers",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+ ],
 		"autosave" : 0
 	}
 
diff --git a/examples/reverb.maxpat b/examples/reverb.maxpat
index 3fd5ebf..7437c19 100644
--- a/examples/reverb.maxpat
+++ b/examples/reverb.maxpat
@@ -4,13 +4,13 @@
 		"appversion" : 		{
 			"major" : 8,
 			"minor" : 1,
-			"revision" : 5,
+			"revision" : 8,
 			"architecture" : "x64",
 			"modernui" : 1
 		}
 ,
 		"classnamespace" : "box",
-		"rect" : [ 59.0, 78.0, 431.0, 612.0 ],
+		"rect" : [ 926.0, 78.0, 576.0, 594.0 ],
 		"bglocked" : 0,
 		"openinpresentation" : 0,
 		"default_fontsize" : 12.0,
@@ -40,25 +40,32 @@
 		"assistshowspatchername" : 0,
 		"boxes" : [ 			{
 				"box" : 				{
-					"id" : "obj-6",
-					"maxclass" : "message",
-					"numinlets" : 2,
-					"numoutlets" : 1,
-					"outlettype" : [ "" ],
-					"patching_rect" : [ 63.0, 224.0, 68.0, 22.0 ],
-					"text" : "exportcode"
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 191.5, 106.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
 				}
 
 			}
 , 			{
 				"box" : 				{
 					"id" : "obj-7",
-					"linecount" : 2,
+					"linecount" : 4,
 					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 148.0, 272.0, 215.0, 33.0 ],
-					"text" : "Based on the Dattoro reverb gen~ example inclouded with Max"
+					"patching_rect" : [ 191.5, 508.0, 337.0, 62.0 ],
+					"text" : "Adapted from the Dattoro reverb gen~ example included with Max, which is based on Jon Dattorro's Effect Design Part 1: Reverberator and Other Filters, located here: https://ccrma.stanford.edu/~dattorro/EffectDesignPart1.pdf"
 				}
 
 			}
@@ -100,13 +107,13 @@
 						"appversion" : 						{
 							"major" : 8,
 							"minor" : 1,
-							"revision" : 5,
+							"revision" : 8,
 							"architecture" : "x64",
 							"modernui" : 1
 						}
 ,
 						"classnamespace" : "dsp.gen",
-						"rect" : [ 397.0, 78.0, 586.0, 703.0 ],
+						"rect" : [ 739.0, 102.0, 868.0, 840.0 ],
 						"bglocked" : 0,
 						"openinpresentation" : 0,
 						"default_fontsize" : 12.0,
@@ -165,8 +172,8 @@
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 369.0, 585.0, 65.0, 22.0 ],
-									"text" : "param wet"
+									"patching_rect" : [ 482.0, 451.666655999999989, 94.0, 22.0 ],
+									"text" : "param ctrl1_wet"
 								}
 
 							}
@@ -311,7 +318,7 @@
 										"appversion" : 										{
 											"major" : 8,
 											"minor" : 1,
-											"revision" : 5,
+											"revision" : 8,
 											"architecture" : "x64",
 											"modernui" : 1
 										}
@@ -1982,7 +1989,7 @@
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 228.5, 441.666655999999989, 98.0, 22.0 ],
+									"patching_rect" : [ 372.5, 451.666655999999989, 98.0, 22.0 ],
 									"text" : "param decay 0.5"
 								}
 
@@ -2035,7 +2042,7 @@
 										"appversion" : 										{
 											"major" : 8,
 											"minor" : 1,
-											"revision" : 5,
+											"revision" : 8,
 											"architecture" : "x64",
 											"modernui" : 1
 										}
@@ -2965,14 +2972,13 @@
  ]
 					}
 ,
-					"patching_rect" : [ 24.0, 272.0, 107.0, 22.0 ],
+					"patching_rect" : [ 24.0, 272.0, 36.0, 22.0 ],
 					"saved_object_attributes" : 					{
-						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/examples/",
-						"exportname" : "reverb",
-						"exportnotifier" : "1208_ged_export"
+						"exportfolder" : "C:/Users/shensley/Documents/Max 8/Packages/oopsy/examples/",
+						"exportname" : "reverb"
 					}
 ,
-					"text" : "gen~ @title reverb",
+					"text" : "gen~",
 					"varname" : "reverb"
 				}
 
@@ -2985,7 +2991,7 @@
 					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 24.0, 26.0, 261.0, 33.0 ],
+					"patching_rect" : [ 24.0, 26.0, 261.0, 34.0 ],
 					"text" : "Reverb"
 				}
 
@@ -3021,17 +3027,12 @@
 					"source" : [ "obj-4", 0 ]
 				}
 
-			}
-, 			{
-				"patchline" : 				{
-					"destination" : [ "obj-1", 0 ],
-					"source" : [ "obj-6", 0 ]
-				}
-
 			}
  ],
 		"parameters" : 		{
 			"obj-4" : [ "live.gain~", "live.gain~", 0 ],
+			"obj-9::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
 			"parameterbanks" : 			{
 
 			}
@@ -3039,7 +3040,28 @@
 			"inherited_shortname" : 1
 		}
 ,
-		"dependency_cache" : [  ],
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.maxpat",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
+				"patcherrelativepath" : "../patchers",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+ ],
 		"autosave" : 0
 	}
 
diff --git a/examples/simple.maxpat b/examples/simple.maxpat
index 169869e..30617ba 100644
--- a/examples/simple.maxpat
+++ b/examples/simple.maxpat
@@ -10,7 +10,7 @@
 		}
 ,
 		"classnamespace" : "box",
-		"rect" : [ 1837.0, 80.0, 640.0, 480.0 ],
+		"rect" : [ 1006.0, 80.0, 640.0, 480.0 ],
 		"bglocked" : 0,
 		"openinpresentation" : 0,
 		"default_fontsize" : 12.0,
@@ -40,24 +40,20 @@
 		"assistshowspatchername" : 0,
 		"boxes" : [ 			{
 				"box" : 				{
-					"id" : "obj-5",
-					"maxclass" : "comment",
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 125.0, 152.0, 186.0, 20.0 ],
-					"text" : "Audio must be enabled for export"
-				}
-
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-3",
-					"maxclass" : "message",
-					"numinlets" : 2,
-					"numoutlets" : 1,
-					"outlettype" : [ "" ],
-					"patching_rect" : [ 125.0, 193.0, 68.0, 22.0 ],
-					"text" : "exportcode"
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 108.5, 111.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
 				}
 
 			}
@@ -79,7 +75,7 @@
 						}
 ,
 						"classnamespace" : "dsp.gen",
-						"rect" : [ 2843.0, 312.0, 600.0, 450.0 ],
+						"rect" : [ 1046.0, 312.0, 600.0, 450.0 ],
 						"bglocked" : 0,
 						"openinpresentation" : 0,
 						"default_fontsize" : 12.0,
@@ -341,27 +337,51 @@
  ]
 					}
 ,
-					"patching_rect" : [ 125.0, 233.0, 108.0, 22.0 ],
+					"patching_rect" : [ 24.0, 261.0, 39.0, 22.0 ],
 					"saved_object_attributes" : 					{
 						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/examples/",
 						"exportname" : "simple"
 					}
 ,
-					"text" : "gen~ @title simple",
+					"text" : "gen~",
 					"varname" : "simple"
 				}
 
 			}
  ],
-		"lines" : [ 			{
-				"patchline" : 				{
-					"destination" : [ "obj-1", 0 ],
-					"source" : [ "obj-3", 0 ]
-				}
+		"lines" : [  ],
+		"parameters" : 		{
+			"obj-9::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
+			"parameterbanks" : 			{
 
 			}
+,
+			"inherited_shortname" : 1
+		}
+,
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.maxpat",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
+				"patcherrelativepath" : "../patchers",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
  ],
-		"dependency_cache" : [  ],
 		"autosave" : 0
 	}
 
diff --git a/examples/daisy_patch.maxpat b/help/oopsy.maxhelp
similarity index 56%
rename from examples/daisy_patch.maxpat
rename to help/oopsy.maxhelp
index f6793aa..f99577f 100644
--- a/examples/daisy_patch.maxpat
+++ b/help/oopsy.maxhelp
@@ -10,7 +10,7 @@
 		}
 ,
 		"classnamespace" : "box",
-		"rect" : [ 692.0, 240.0, 640.0, 480.0 ],
+		"rect" : [ 429.0, 121.0, 640.0, 480.0 ],
 		"bglocked" : 0,
 		"openinpresentation" : 0,
 		"default_fontsize" : 12.0,
@@ -40,23 +40,67 @@
 		"assistshowspatchername" : 0,
 		"boxes" : [ 			{
 				"box" : 				{
-					"id" : "obj-2",
+					"id" : "obj-11",
 					"linecount" : 4,
 					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 375.0, 118.0, 153.0, 60.0 ],
-					"text" : "Send a bang to [oopsy], or just save the patcher, to trigger code generation and upload."
+					"patching_rect" : [ 315.0, 271.0, 261.0, 60.0 ],
+					"text" : "If the max patch has more than one gen~ object, all will be combined into a \"multi-app\" binary for the Daisy. Use the device encoder or switches to select the apps. "
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-13",
-					"maxclass" : "newobj",
+					"id" : "obj-10",
+					"linecount" : 2,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 315.0, 229.0, 259.0, 33.0 ],
+					"text" : "If the device is plugged in via USB and ready to flash, oopsy will also try to flash it."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"bubble" : 1,
+					"id" : "obj-7",
+					"linecount" : 4,
+					"maxclass" : "comment",
 					"numinlets" : 1,
-					"numoutlets" : 3,
-					"outlettype" : [ "signal", "signal", "signal" ],
+					"numoutlets" : 0,
+					"patching_rect" : [ 300.0, 155.0, 275.0, 64.0 ],
+					"text" : "Drop in an 'oopsy_builder' bpatcher in any Max patch with gen~ objects. Select the target from the drop down and bang (or save the patch) to compile!"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 163.0, 155.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-5",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "signal" ],
 					"patcher" : 					{
 						"fileversion" : 1,
 						"appversion" : 						{
@@ -97,13 +141,26 @@
 						"subpatcher_template" : "",
 						"assistshowspatchername" : 0,
 						"boxes" : [ 							{
+								"box" : 								{
+									"id" : "obj-10",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 78.0, 192.0, 37.0, 22.0 ],
+									"text" : "noise"
+								}
+
+							}
+, 							{
 								"box" : 								{
 									"id" : "obj-9",
 									"maxclass" : "newobj",
-									"numinlets" : 1,
-									"numoutlets" : 0,
-									"patching_rect" : [ 395.0, 266.0, 57.0, 22.0 ],
-									"text" : "out 3 cv1"
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 62.0, 227.0, 29.5, 22.0 ],
+									"text" : "*"
 								}
 
 							}
@@ -112,9 +169,10 @@
 									"id" : "obj-8",
 									"maxclass" : "newobj",
 									"numinlets" : 1,
-									"numoutlets" : 0,
-									"patching_rect" : [ 352.0, 339.0, 69.0, 22.0 ],
-									"text" : "out 2 gate1"
+									"numoutlets" : 2,
+									"outlettype" : [ "", "" ],
+									"patching_rect" : [ 165.0, 192.0, 36.0, 22.0 ],
+									"text" : "cycle"
 								}
 
 							}
@@ -125,56 +183,55 @@
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 73.0, 316.0, 65.0, 22.0 ],
-									"text" : "param cv2"
+									"patching_rect" : [ 62.0, 149.0, 62.0, 22.0 ],
+									"text" : "param ctrl"
 								}
 
 							}
 , 							{
 								"box" : 								{
-									"id" : "obj-5",
+									"id" : "obj-6",
 									"maxclass" : "newobj",
 									"numinlets" : 0,
-									"numoutlets" : 2,
-									"outlettype" : [ "", "" ],
-									"patching_rect" : [ 315.0, 138.0, 102.0, 22.0 ],
-									"text" : "data foodat 100 2"
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 165.0, 149.0, 188.0, 22.0 ],
+									"text" : "param ctrl2 @min 200 @max 800"
 								}
 
 							}
 , 							{
 								"box" : 								{
-									"id" : "obj-1",
+									"id" : "obj-5",
 									"maxclass" : "newobj",
-									"numinlets" : 0,
-									"numoutlets" : 1,
-									"outlettype" : [ "" ],
-									"patching_rect" : [ 50.0, 14.0, 60.0, 22.0 ],
-									"text" : "in 1 offset"
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 142.0, 337.0, 35.0, 22.0 ],
+									"text" : "out 2"
 								}
 
 							}
 , 							{
 								"box" : 								{
-									"id" : "obj-2",
+									"id" : "obj-1",
 									"maxclass" : "newobj",
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 305.0, 14.0, 88.0, 22.0 ],
-									"text" : "param cv1_foo"
+									"patching_rect" : [ 33.0, 73.0, 28.0, 22.0 ],
+									"text" : "in 1"
 								}
 
 							}
 , 							{
 								"box" : 								{
-									"id" : "obj-3",
+									"id" : "obj-2",
 									"maxclass" : "newobj",
 									"numinlets" : 0,
 									"numoutlets" : 1,
 									"outlettype" : [ "" ],
-									"patching_rect" : [ 176.0, 149.0, 37.0, 22.0 ],
-									"text" : "noise"
+									"patching_rect" : [ 142.0, 73.0, 28.0, 22.0 ],
+									"text" : "in 2"
 								}
 
 							}
@@ -184,8 +241,8 @@
 									"maxclass" : "newobj",
 									"numinlets" : 1,
 									"numoutlets" : 0,
-									"patching_rect" : [ 176.0, 418.0, 61.0, 22.0 ],
-									"text" : "out 1 sum"
+									"patching_rect" : [ 33.0, 337.0, 35.0, 22.0 ],
+									"text" : "out 1"
 								}
 
 							}
@@ -199,209 +256,96 @@
 							}
 , 							{
 								"patchline" : 								{
-									"destination" : [ "obj-4", 0 ],
-									"source" : [ "obj-2", 0 ]
+									"destination" : [ "obj-9", 1 ],
+									"source" : [ "obj-10", 0 ]
 								}
 
 							}
 , 							{
 								"patchline" : 								{
-									"destination" : [ "obj-4", 0 ],
-									"source" : [ "obj-3", 0 ]
+									"destination" : [ "obj-5", 0 ],
+									"source" : [ "obj-2", 0 ]
 								}
 
 							}
 , 							{
 								"patchline" : 								{
 									"destination" : [ "obj-8", 0 ],
-									"order" : 1,
-									"source" : [ "obj-5", 0 ]
+									"source" : [ "obj-6", 0 ]
 								}
 
 							}
 , 							{
 								"patchline" : 								{
 									"destination" : [ "obj-9", 0 ],
-									"order" : 0,
-									"source" : [ "obj-5", 0 ]
+									"source" : [ "obj-7", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-5", 0 ],
+									"source" : [ "obj-8", 0 ]
 								}
 
 							}
 , 							{
 								"patchline" : 								{
 									"destination" : [ "obj-4", 0 ],
-									"source" : [ "obj-7", 0 ]
+									"source" : [ "obj-9", 0 ]
 								}
 
 							}
  ]
 					}
 ,
-					"patching_rect" : [ 184.0, 291.0, 130.0, 22.0 ],
+					"patching_rect" : [ 49.0, 213.0, 36.0, 22.0 ],
 					"saved_object_attributes" : 					{
-						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/examples/",
-						"exportname" : "otherpatch"
+						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/help/",
+						"exportname" : "oopsymaxhelp"
 					}
 ,
-					"text" : "gen~ @title otherpatch",
-					"varname" : "otherpatch"
+					"text" : "gen~",
+					"varname" : "oopsymaxhelp"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-12",
-					"maxclass" : "button",
+					"id" : "obj-4",
+					"maxclass" : "comment",
 					"numinlets" : 1,
-					"numoutlets" : 1,
-					"outlettype" : [ "bang" ],
-					"parameter_enable" : 0,
-					"patching_rect" : [ 375.0, 186.0, 33.0, 33.0 ]
+					"numoutlets" : 0,
+					"patching_rect" : [ 13.0, 48.0, 123.0, 20.0 ],
+					"text" : "Daisy from gen~"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-6",
-					"maxclass" : "newobj",
+					"fontname" : "Arial Bold Italic",
+					"fontsize" : 24.0,
+					"id" : "obj-2",
+					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 375.0, 225.0, 119.0, 22.0 ],
-					"text" : "oopsy @target patch"
+					"patching_rect" : [ 13.0, 13.0, 123.0, 33.0 ],
+					"text" : "Oopsy"
 				}
 
 			}
-, 			{
-				"box" : 				{
-					"id" : "obj-3",
-					"maxclass" : "newobj",
-					"numinlets" : 2,
-					"numoutlets" : 1,
-					"outlettype" : [ "signal" ],
-					"patcher" : 					{
-						"fileversion" : 1,
-						"appversion" : 						{
-							"major" : 8,
-							"minor" : 1,
-							"revision" : 5,
-							"architecture" : "x64",
-							"modernui" : 1
-						}
-,
-						"classnamespace" : "dsp.gen",
-						"rect" : [ 84.0, 103.0, 600.0, 450.0 ],
-						"bglocked" : 0,
-						"openinpresentation" : 0,
-						"default_fontsize" : 12.0,
-						"default_fontface" : 0,
-						"default_fontname" : "Arial",
-						"gridonopen" : 1,
-						"gridsize" : [ 15.0, 15.0 ],
-						"gridsnaponopen" : 1,
-						"objectsnaponopen" : 1,
-						"statusbarvisible" : 2,
-						"toolbarvisible" : 1,
-						"lefttoolbarpinned" : 0,
-						"toptoolbarpinned" : 0,
-						"righttoolbarpinned" : 0,
-						"bottomtoolbarpinned" : 0,
-						"toolbars_unpinned_last_save" : 0,
-						"tallnewobj" : 0,
-						"boxanimatetime" : 200,
-						"enablehscroll" : 1,
-						"enablevscroll" : 1,
-						"devicewidth" : 0.0,
-						"description" : "",
-						"digest" : "",
-						"tags" : "",
-						"style" : "",
-						"subpatcher_template" : "",
-						"assistshowspatchername" : 0,
-						"boxes" : [ 							{
-								"box" : 								{
-									"id" : "obj-1",
-									"maxclass" : "newobj",
-									"numinlets" : 0,
-									"numoutlets" : 1,
-									"outlettype" : [ "" ],
-									"patching_rect" : [ 50.0, 14.0, 28.0, 22.0 ],
-									"text" : "in 1"
-								}
-
-							}
-, 							{
-								"box" : 								{
-									"id" : "obj-2",
-									"maxclass" : "newobj",
-									"numinlets" : 0,
-									"numoutlets" : 1,
-									"outlettype" : [ "" ],
-									"patching_rect" : [ 305.0, 14.0, 28.0, 22.0 ],
-									"text" : "in 2"
-								}
-
-							}
-, 							{
-								"box" : 								{
-									"id" : "obj-3",
-									"maxclass" : "newobj",
-									"numinlets" : 1,
-									"numoutlets" : 2,
-									"outlettype" : [ "", "" ],
-									"patching_rect" : [ 176.0, 149.0, 36.0, 22.0 ],
-									"text" : "cycle"
-								}
-
-							}
-, 							{
-								"box" : 								{
-									"id" : "obj-4",
-									"maxclass" : "newobj",
-									"numinlets" : 1,
-									"numoutlets" : 0,
-									"patching_rect" : [ 46.5, 302.0, 35.0, 22.0 ],
-									"text" : "out 1"
-								}
-
-							}
  ],
-						"lines" : [ 							{
-								"patchline" : 								{
-									"destination" : [ "obj-4", 0 ],
-									"source" : [ "obj-1", 0 ]
-								}
-
-							}
-, 							{
-								"patchline" : 								{
-									"destination" : [ "obj-4", 0 ],
-									"source" : [ "obj-3", 0 ]
-								}
+		"lines" : [  ],
+		"parameters" : 		{
+			"obj-9::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
+			"parameterbanks" : 			{
 
-							}
- ]
-					}
+			}
 ,
-					"patching_rect" : [ 33.0, 291.0, 137.0, 22.0 ],
-					"saved_object_attributes" : 					{
-						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/examples/",
-						"exportname" : "simplepatch"
-					}
+			"inherited_shortname" : 1
+		}
 ,
-					"text" : "gen~ @title simplepatch",
-					"varname" : "simplepatch"
-				}
-
-			}
- ],
-		"lines" : [ 			{
-				"patchline" : 				{
-					"destination" : [ "obj-6", 0 ],
-					"source" : [ "obj-12", 0 ]
-				}
-
-			}
- ],
 		"dependency_cache" : [ 			{
 				"name" : "oopsy.maxpat",
 				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
diff --git a/init/oopsy-objectmappings.txt b/init/oopsy-objectmappings.txt
new file mode 100644
index 0000000..04440f5
--- /dev/null
+++ b/init/oopsy-objectmappings.txt
@@ -0,0 +1,10 @@
+max definesubstitution oopsy.patch bpatcher @name oopsy.maxpat @args patch;
+max objectfile oopsy.patch oopsy.patch;
+max definesubstitution oopsy.field bpatcher @name oopsy.maxpat @args field;
+max objectfile oopsy.field oopsy.field;
+max definesubstitution oopsy.petal bpatcher @name oopsy.maxpat @args petal;
+max objectfile oopsy.petal oopsy.petal;
+max definesubstitution oopsy.pod bpatcher @name oopsy.maxpat @args pod;
+max objectfile oopsy.pod oopsy.pod;
+max definesubstitution oopsy.versio bpatcher @name oopsy.maxpat @args versio;
+max objectfile oopsy.versio oopsy.versio;
diff --git a/install.sh b/install.sh
index 745c458..8505711 100755
--- a/install.sh
+++ b/install.sh
@@ -15,5 +15,5 @@ echo "rebuilding libdaisy"
 cd source
 cd libdaisy
 make clean | grep "warningr:\|error:"
-make | grep "warning:r\|error:"
+make -j4 | grep "warning:r\|error:"
 echo "done building libdaisy"
diff --git a/javascript/oopsy.node4max.js b/javascript/oopsy.node4max.js
index e36b390..63521b1 100644
--- a/javascript/oopsy.node4max.js
+++ b/javascript/oopsy.node4max.js
@@ -1,19 +1,40 @@
 // Node4Max wrapper of the gen2daisy.node.js script
 
-const path = require("path")
-// 	fs = require("fs"),
-// 	os = require("os"),
-// 	assert = require("assert");
-// const {exec, spawn} = require("child_process");
-
+const path = require("path"), 
+	os = require("os")
 const maxAPI = require("max-api");
 const run = require(path.join(__dirname, "..", "source", "oopsy.js"));
 
-try {
+let filter
+if (os.platform() == "win32") {
+	filter = function(str) {
+		maxAPI.outlet(str)
+	}
+} else {
+	filter = function(str) {
+		let match
+		if (match = label.match(/^Building/gm)) {
+			maxAPI.outlet(str)
+		} else {
+			maxAPI.outlet("--" + str)
+		}
+	}
+}
 
-	// I'd like to filter the stdout/stderr streams here
-	// especially for the DFU upload stuff (no point showing errors that are not really errors!)
+// duplicate stdout here so we can filter it and display more useful things in Max:
+// dup stdout to our handler:
+process.stdout.write = (function() {
+	const stdout_write = process.stdout.write;
+	return function(str) {
+		stdout_write.apply(process.stdout, arguments);
+		let match
+		if (match = str.match(/^oopsy (.*)/i)) {
+			maxAPI.outlet(match[1])
+		} 
+	}
+})();
 
+try {
 	run(...process.argv.slice(2))
 } catch(e) {
 	maxAPI.post(e.message ? e.message : e, maxAPI.POST_LEVELS.ERROR);
diff --git a/javascript/oopsy.snoop.js b/javascript/oopsy.snoop.js
index ff4cec8..5bde857 100644
--- a/javascript/oopsy.snoop.js
+++ b/javascript/oopsy.snoop.js
@@ -14,13 +14,13 @@ function bang() {
 function configure(doExport) {
 	var pat = this.patcher.parentpatcher;
 	if (!pat.filepath) {
-		error("patcher needs to be saved first\n");
+		error("oopsy: your patcher needs to be saved first\n");
 		pat.message("write");
 		return false;
 	}
 	var export_path = extractFilepath(pat.filepath);
 
-
+	var default_name = pat.name || "gen";
 
 	// send message out to convert this path
 	// response will update the variable `path`:
@@ -34,7 +34,7 @@ function configure(doExport) {
 	var gen = pat.firstobject;
 	while (gen) {
 		if (gen.maxclass.toString() == "gen~") {
-			var name = "gen";
+			var name = default_name;
 			if (gen.getattr("exportname")) { 
 				name = gen.getattr("exportname").toString(); 
 			} else if (gen.getattr("title")) { 
diff --git a/patchers/oopsy.maxpat b/patchers/oopsy.maxpat
index 1cc6948..6f896fe 100644
--- a/patchers/oopsy.maxpat
+++ b/patchers/oopsy.maxpat
@@ -4,15 +4,15 @@
 		"appversion" : 		{
 			"major" : 8,
 			"minor" : 1,
-			"revision" : 5,
+			"revision" : 8,
 			"architecture" : "x64",
 			"modernui" : 1
 		}
 ,
 		"classnamespace" : "box",
-		"rect" : [ 477.0, 107.0, 674.0, 467.0 ],
+		"rect" : [ 608.0, 155.0, 806.0, 727.0 ],
 		"bglocked" : 0,
-		"openinpresentation" : 0,
+		"openinpresentation" : 1,
 		"default_fontsize" : 12.0,
 		"default_fontface" : 0,
 		"default_fontname" : "Arial",
@@ -40,119 +40,494 @@
 		"assistshowspatchername" : 0,
 		"boxes" : [ 			{
 				"box" : 				{
-					"id" : "obj-4",
+					"id" : "obj-3",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 3,
+					"outlettype" : [ "", "", "" ],
+					"patching_rect" : [ 552.0, 594.0, 106.0, 22.0 ],
+					"text" : "route stdout stderr"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-1",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "bang" ],
+					"patching_rect" : [ 222.0, 166.0, 58.0, 22.0 ],
+					"text" : "loadbang"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-56",
 					"linecount" : 2,
 					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 430.0, 16.0, 168.0, 33.0 ],
-					"text" : "bang (or save patcher) to trigger the oopsy workflow"
+					"patching_rect" : [ 516.0, 193.0, 150.0, 33.0 ],
+					"text" : "saving a patcher will also trigger compile"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-3",
+					"id" : "obj-55",
+					"linecount" : 2,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 521.0, 323.25, 150.0, 33.0 ],
+					"text" : "audio must be on for  exportcode to work"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-48",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "", "int" ],
+					"patching_rect" : [ 425.0, 323.25, 91.0, 22.0 ],
+					"text" : "adstatus switch"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-45",
 					"maxclass" : "newobj",
 					"numinlets" : 1,
 					"numoutlets" : 1,
 					"outlettype" : [ "bang" ],
-					"patching_rect" : [ 367.0, 24.0, 61.0, 22.0 ],
+					"patching_rect" : [ 435.0, 193.0, 61.0, 22.0 ],
 					"text" : "savebang"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-30",
-					"linecount" : 4,
-					"maxclass" : "comment",
+					"comment" : "",
+					"id" : "obj-43",
+					"index" : 0,
+					"maxclass" : "inlet",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 222.0, 53.0, 30.0, 30.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-41",
+					"maxclass" : "newobj",
 					"numinlets" : 1,
-					"numoutlets" : 0,
-					"patching_rect" : [ 23.0, 89.0, 67.0, 60.0 ],
-					"text" : "choose device target to compile for"
+					"numoutlets" : 2,
+					"outlettype" : [ "bang", "int" ],
+					"patching_rect" : [ 406.0, 291.0, 32.0, 22.0 ],
+					"text" : "t b 1"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-29",
-					"linecount" : 5,
-					"maxclass" : "comment",
+					"id" : "obj-38",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "bang", "" ],
+					"patching_rect" : [ 222.0, 90.0, 136.0, 22.0 ],
+					"text" : "sel bang"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-37",
+					"maxclass" : "newobj",
 					"numinlets" : 1,
-					"numoutlets" : 0,
-					"patching_rect" : [ 40.5, 264.0, 224.0, 74.0 ],
-					"text" : "the node.js script is a thin wrapper around oopsy.js, which will generate the glue code between gen~ export and the Daisy APIs, compile it, and try to upload it to a device."
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 222.0, 235.0, 94.0, 22.0 ],
+					"text" : "prepend symbol"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-28",
-					"linecount" : 4,
-					"maxclass" : "comment",
+					"id" : "obj-21",
+					"linecount" : 3,
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 3,
+					"outlettype" : [ "", "", "" ],
+					"patching_rect" : [ 339.0, 166.0, 64.0, 49.0 ],
+					"text" : "route target done"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-15",
+					"maxclass" : "newobj",
 					"numinlets" : 1,
-					"numoutlets" : 0,
-					"patching_rect" : [ 40.5, 199.500003099441528, 223.5, 60.0 ],
-					"text" : "oopsy.snoop will find all the gen~ objects in the parent patcher, configure them for export, trigger the export, then notify the node.js script"
+					"numoutlets" : 2,
+					"outlettype" : [ "", "" ],
+					"patching_rect" : [ 222.0, 193.0, 72.0, 22.0 ],
+					"text" : "patcherargs"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-26",
-					"linecount" : 2,
+					"id" : "obj-11",
+					"linecount" : 3,
 					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 457.0, 203.000003099441528, 114.0, 33.0 ],
-					"text" : "turn Max-style path into OS path"
+					"patching_rect" : [ 39.5, 65.0, 152.0, 47.0 ],
+					"text" : "bang will trigger compile,\nother messages route to patcherattrs parser first"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-25",
+					"id" : "obj-35",
 					"maxclass" : "newobj",
-					"numinlets" : 2,
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patcher" : 					{
+						"fileversion" : 1,
+						"appversion" : 						{
+							"major" : 8,
+							"minor" : 1,
+							"revision" : 8,
+							"architecture" : "x64",
+							"modernui" : 1
+						}
+,
+						"classnamespace" : "box",
+						"rect" : [ 0.0, 0.0, 640.0, 480.0 ],
+						"bglocked" : 0,
+						"openinpresentation" : 0,
+						"default_fontsize" : 12.0,
+						"default_fontface" : 0,
+						"default_fontname" : "Arial",
+						"gridonopen" : 1,
+						"gridsize" : [ 15.0, 15.0 ],
+						"gridsnaponopen" : 1,
+						"objectsnaponopen" : 1,
+						"statusbarvisible" : 2,
+						"toolbarvisible" : 1,
+						"lefttoolbarpinned" : 0,
+						"toptoolbarpinned" : 0,
+						"righttoolbarpinned" : 0,
+						"bottomtoolbarpinned" : 0,
+						"toolbars_unpinned_last_save" : 0,
+						"tallnewobj" : 0,
+						"boxanimatetime" : 200,
+						"enablehscroll" : 1,
+						"enablevscroll" : 1,
+						"devicewidth" : 0.0,
+						"description" : "",
+						"digest" : "",
+						"tags" : "",
+						"style" : "",
+						"subpatcher_template" : "",
+						"assistshowspatchername" : 0,
+						"boxes" : [ 							{
+								"box" : 								{
+									"id" : "obj-23",
+									"maxclass" : "newobj",
+									"numinlets" : 3,
+									"numoutlets" : 1,
+									"outlettype" : [ "int" ],
+									"patching_rect" : [ 50.0, 173.75, 40.0, 22.0 ],
+									"text" : "itoa"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-22",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 2,
+									"outlettype" : [ "int", "" ],
+									"patching_rect" : [ 50.0, 136.5, 35.0, 22.0 ],
+									"text" : "t 13 l"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-9",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 50.0, 100.0, 71.0, 22.0 ],
+									"text" : "fromsymbol"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-50",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 50.0, 211.0, 96.0, 22.0 ],
+									"text" : "prepend append"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"comment" : "",
+									"id" : "obj-33",
+									"index" : 1,
+									"maxclass" : "inlet",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 50.0, 40.0, 30.0, 30.0 ]
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"comment" : "",
+									"id" : "obj-34",
+									"index" : 1,
+									"maxclass" : "outlet",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 50.0, 293.0, 30.0, 30.0 ]
+								}
+
+							}
+ ],
+						"lines" : [ 							{
+								"patchline" : 								{
+									"destination" : [ "obj-23", 0 ],
+									"source" : [ "obj-22", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-50", 0 ],
+									"source" : [ "obj-22", 1 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-50", 0 ],
+									"source" : [ "obj-23", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-9", 0 ],
+									"source" : [ "obj-33", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-34", 0 ],
+									"source" : [ "obj-50", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-22", 0 ],
+									"source" : [ "obj-9", 0 ]
+								}
+
+							}
+ ]
+					}
+,
+					"patching_rect" : [ 273.0, 538.0, 53.0, 22.0 ],
+					"saved_object_attributes" : 					{
+						"description" : "",
+						"digest" : "",
+						"globalpatchername" : "",
+						"tags" : ""
+					}
+,
+					"text" : "p format"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-51",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "clear" ],
+					"patching_rect" : [ 329.5, 538.0, 41.0, 22.0 ],
+					"text" : "t clear"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-47",
+					"maxclass" : "textedit",
+					"numinlets" : 1,
+					"numoutlets" : 4,
+					"outlettype" : [ "", "int", "", "" ],
+					"parameter_enable" : 0,
+					"patching_rect" : [ 273.0, 573.0, 136.0, 75.0 ],
+					"presentation" : 1,
+					"presentation_rect" : [ 0.0, 32.0, 128.0, 92.0 ],
+					"readonly" : 1,
+					"separator" : "newline"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-36",
+					"maxclass" : "live.menu",
+					"numinlets" : 1,
+					"numoutlets" : 3,
+					"outlettype" : [ "", "", "float" ],
+					"parameter_enable" : 1,
+					"patching_rect" : [ 222.0, 269.0, 100.0, 15.0 ],
+					"presentation" : 1,
+					"presentation_rect" : [ 31.0, 0.0, 45.0, 15.0 ],
+					"saved_attribute_attributes" : 					{
+						"valueof" : 						{
+							"parameter_enum" : [ "patch", "field", "petal", "pod" ],
+							"parameter_longname" : "live.menu[1]",
+							"parameter_mmax" : 3,
+							"parameter_shortname" : "live.menu",
+							"parameter_type" : 2
+						}
+
+					}
+,
+					"varname" : "live.menu"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"automation" : "Off",
+					"automationon" : "On",
+					"id" : "obj-32",
+					"maxclass" : "live.text",
+					"numinlets" : 1,
+					"numoutlets" : 2,
+					"outlettype" : [ "", "" ],
+					"parameter_enable" : 1,
+					"patching_rect" : [ 502.0, 533.191986000000043, 62.0, 16.0 ],
+					"presentation" : 1,
+					"presentation_rect" : [ 76.0, 0.0, 52.0, 15.0 ],
+					"saved_attribute_attributes" : 					{
+						"valueof" : 						{
+							"parameter_enum" : [ "Off", "On" ],
+							"parameter_initial" : [ 0 ],
+							"parameter_linknames" : 1,
+							"parameter_longname" : "live.text[2]",
+							"parameter_mmax" : 1,
+							"parameter_shortname" : "FILTER",
+							"parameter_type" : 2
+						}
+
+					}
+,
+					"text" : "DISCREET",
+					"texton" : "VERBOSE",
+					"varname" : "live.text[2]"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-6",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
 					"numoutlets" : 2,
 					"outlettype" : [ "bang", "" ],
-					"patching_rect" : [ 296.5, 89.0, 54.0, 22.0 ],
-					"text" : "sel bang"
+					"patching_rect" : [ 262.5, 291.0, 29.5, 22.0 ],
+					"text" : "t b l"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-24",
+					"id" : "obj-13",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 552.0, 562.0, 32.0, 22.0 ],
+					"text" : "gate"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-30",
+					"linecount" : 2,
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 39.5, 235.0, 150.0, 33.0 ],
+					"text" : "choose device target to compile for"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-29",
 					"linecount" : 5,
 					"maxclass" : "comment",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 351.0, 89.0, 94.0, 74.0 ],
-					"text" : "audio must be on for the exportcode message to work"
+					"patching_rect" : [ 39.5, 466.0, 224.0, 74.0 ],
+					"text" : "the node.js script is a thin wrapper around oopsy.js, which will generate the glue code between gen~ export and the Daisy APIs, compile it, and try to upload it to a device."
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-20",
-					"maxclass" : "ezdac~",
-					"numinlets" : 2,
+					"id" : "obj-28",
+					"linecount" : 4,
+					"maxclass" : "comment",
+					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 296.5, 137.0, 31.0, 31.0 ]
+					"patching_rect" : [ 39.5, 376.000003099441528, 223.5, 60.0 ],
+					"text" : "oopsy.snoop will find all the gen~ objects in the parent patcher, configure them for export, trigger the export, then notify the node.js script"
 				}
 
 			}
 , 			{
 				"box" : 				{
-					"id" : "obj-19",
-					"maxclass" : "newobj",
+					"id" : "obj-26",
+					"linecount" : 2,
+					"maxclass" : "comment",
 					"numinlets" : 1,
-					"numoutlets" : 1,
-					"outlettype" : [ "int" ],
-					"patching_rect" : [ 296.5, 113.0, 22.0, 22.0 ],
-					"text" : "t 1"
+					"numoutlets" : 0,
+					"patching_rect" : [ 456.0, 376.000003099441528, 114.0, 33.0 ],
+					"text" : "turn Max-style path into OS path"
 				}
 
 			}
@@ -163,7 +538,7 @@
 					"numinlets" : 2,
 					"numoutlets" : 4,
 					"outlettype" : [ "dictionary", "", "", "" ],
-					"patching_rect" : [ 340.0, 394.0, 50.5, 22.0 ],
+					"patching_rect" : [ 482.0, 594.0, 50.5, 22.0 ],
 					"saved_object_attributes" : 					{
 						"embed" : 0,
 						"parameter_enable" : 0,
@@ -173,17 +548,6 @@
 					"text" : "dict"
 				}
 
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-34",
-					"maxclass" : "newobj",
-					"numinlets" : 1,
-					"numoutlets" : 0,
-					"patching_rect" : [ 487.0, 357.0, 66.0, 22.0 ],
-					"text" : "print stderr"
-				}
-
 			}
 , 			{
 				"box" : 				{
@@ -191,8 +555,8 @@
 					"maxclass" : "newobj",
 					"numinlets" : 1,
 					"numoutlets" : 0,
-					"patching_rect" : [ 412.0, 357.0, 68.0, 22.0 ],
-					"text" : "print stdout"
+					"patching_rect" : [ 552.0, 626.0, 114.0, 22.0 ],
+					"text" : "print oopsy-verbose"
 				}
 
 			}
@@ -203,7 +567,7 @@
 					"numinlets" : 2,
 					"numoutlets" : 2,
 					"outlettype" : [ "", "" ],
-					"patching_rect" : [ 340.0, 357.0, 65.0, 22.0 ],
+					"patching_rect" : [ 482.0, 562.0, 65.0, 22.0 ],
 					"text" : "route error"
 				}
 
@@ -212,11 +576,11 @@
 				"box" : 				{
 					"id" : "obj-42",
 					"maxclass" : "newobj",
-					"numinlets" : 6,
-					"numoutlets" : 6,
-					"outlettype" : [ "", "", "", "", "", "" ],
-					"patching_rect" : [ 340.0, 310.0, 219.0, 22.0 ],
-					"text" : "route terminated stdout stderr stop start"
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "", "" ],
+					"patching_rect" : [ 482.0, 501.0, 102.0, 22.0 ],
+					"text" : "route terminated"
 				}
 
 			}
@@ -228,9 +592,9 @@
 					"numoutlets" : 1,
 					"outlettype" : [ "bang" ],
 					"parameter_enable" : 0,
-					"patching_rect" : [ 333.0, 16.0, 30.0, 30.0 ],
+					"patching_rect" : [ 406.0, 235.0, 30.0, 30.0 ],
 					"presentation" : 1,
-					"presentation_rect" : [ 333.0, 16.0, 30.0, 30.0 ]
+					"presentation_rect" : [ 0.0, 0.0, 30.0, 30.0 ]
 				}
 
 			}
@@ -243,10 +607,12 @@
 					"numinlets" : 1,
 					"numoutlets" : 2,
 					"outlettype" : [ "", "" ],
-					"patching_rect" : [ 274.0, 264.0, 228.0, 26.0 ],
+					"patching_rect" : [ 273.0, 466.0, 228.0, 26.0 ],
 					"saved_object_attributes" : 					{
 						"autostart" : 0,
 						"defer" : 0,
+						"node_bin_path" : "",
+						"npm_bin_path" : "",
 						"watch" : 0
 					}
 ,
@@ -261,61 +627,10 @@
 					"numinlets" : 1,
 					"numoutlets" : 1,
 					"outlettype" : [ "" ],
-					"patching_rect" : [ 274.0, 235.0, 111.0, 22.0 ],
+					"patching_rect" : [ 273.0, 408.0, 111.0, 22.0 ],
 					"text" : "prepend script start"
 				}
 
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-18",
-					"maxclass" : "newobj",
-					"numinlets" : 1,
-					"numoutlets" : 1,
-					"outlettype" : [ "" ],
-					"patching_rect" : [ 93.5, 89.0, 72.0, 22.0 ],
-					"text" : "prepend set"
-				}
-
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-17",
-					"maxclass" : "newobj",
-					"numinlets" : 3,
-					"numoutlets" : 3,
-					"outlettype" : [ "", "", "" ],
-					"patching_rect" : [ 93.5, 59.0, 199.0, 22.0 ],
-					"text" : "route target done"
-				}
-
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-16",
-					"maxclass" : "newobj",
-					"numinlets" : 1,
-					"numoutlets" : 2,
-					"outlettype" : [ "", "" ],
-					"patching_rect" : [ 40.5, 24.0, 72.0, 22.0 ],
-					"text" : "patcherargs"
-				}
-
-			}
-, 			{
-				"box" : 				{
-					"id" : "obj-15",
-					"items" : [ "patch", ",", "field", ",", "petal", ",", "pod" ],
-					"maxclass" : "umenu",
-					"numinlets" : 1,
-					"numoutlets" : 3,
-					"outlettype" : [ "int", "", "" ],
-					"parameter_enable" : 0,
-					"patching_rect" : [ 93.5, 118.0, 100.0, 22.0 ],
-					"presentation" : 1,
-					"presentation_rect" : [ 93.5, 118.0, 100.0, 22.0 ]
-				}
-
 			}
 , 			{
 				"box" : 				{
@@ -324,7 +639,7 @@
 					"numinlets" : 1,
 					"numoutlets" : 1,
 					"outlettype" : [ "" ],
-					"patching_rect" : [ 134.0, 147.000003099441528, 130.0, 22.0 ],
+					"patching_rect" : [ 273.0, 323.25, 130.0, 22.0 ],
 					"text" : "prepend setprop target"
 				}
 
@@ -341,7 +656,7 @@
 						"appversion" : 						{
 							"major" : 8,
 							"minor" : 1,
-							"revision" : 5,
+							"revision" : 8,
 							"architecture" : "x64",
 							"modernui" : 1
 						}
@@ -469,7 +784,7 @@
  ]
 					}
 ,
-					"patching_rect" : [ 398.0, 203.000003099441528, 54.0, 22.0 ],
+					"patching_rect" : [ 397.0, 376.000003099441528, 54.0, 22.0 ],
 					"saved_object_attributes" : 					{
 						"description" : "",
 						"digest" : "",
@@ -480,19 +795,6 @@
 					"text" : "p fixpath"
 				}
 
-			}
-, 			{
-				"box" : 				{
-					"comment" : "",
-					"id" : "obj-1",
-					"index" : 1,
-					"maxclass" : "inlet",
-					"numinlets" : 0,
-					"numoutlets" : 1,
-					"outlettype" : [ "bang" ],
-					"patching_rect" : [ 117.5, 16.0, 30.0, 30.0 ]
-				}
-
 			}
 , 			{
 				"box" : 				{
@@ -503,9 +805,9 @@
 					"numinlets" : 2,
 					"numoutlets" : 2,
 					"outlettype" : [ "", "" ],
-					"patching_rect" : [ 274.0, 203.000003099441528, 114.0, 26.0 ],
+					"patching_rect" : [ 273.0, 376.000003099441528, 114.0, 26.0 ],
 					"saved_object_attributes" : 					{
-						"filename" : "oopsy.snoop.js",
+						"filename" : "oopsy.snoop",
 						"parameter_enable" : 0
 					}
 ,
@@ -516,7 +818,7 @@
  ],
 		"lines" : [ 			{
 				"patchline" : 				{
-					"destination" : [ "obj-17", 0 ],
+					"destination" : [ "obj-15", 0 ],
 					"source" : [ "obj-1", 0 ]
 				}
 
@@ -527,113 +829,198 @@
 					"source" : [ "obj-12", 0 ]
 				}
 
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-13", 0 ]
+				}
+
 			}
 , 			{
 				"patchline" : 				{
 					"destination" : [ "obj-5", 0 ],
+					"midpoints" : [ 282.5, 363.750001549720764, 282.5, 363.750001549720764 ],
 					"source" : [ "obj-14", 0 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-14", 0 ],
+					"destination" : [ "obj-21", 0 ],
 					"source" : [ "obj-15", 1 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-17", 0 ],
-					"source" : [ "obj-16", 1 ]
+					"destination" : [ "obj-37", 0 ],
+					"source" : [ "obj-15", 0 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-18", 0 ],
-					"source" : [ "obj-17", 0 ]
+					"destination" : [ "obj-13", 1 ],
+					"order" : 0,
+					"source" : [ "obj-2", 0 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-25", 0 ],
-					"order" : 0,
-					"source" : [ "obj-17", 2 ]
+					"destination" : [ "obj-35", 0 ],
+					"order" : 1,
+					"source" : [ "obj-2", 0 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-5", 0 ],
-					"order" : 1,
-					"source" : [ "obj-17", 2 ]
+					"destination" : [ "obj-42", 0 ],
+					"source" : [ "obj-2", 1 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-15", 0 ],
-					"source" : [ "obj-18", 0 ]
+					"destination" : [ "obj-37", 0 ],
+					"midpoints" : [ 348.5, 227.5, 231.5, 227.5 ],
+					"source" : [ "obj-21", 0 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-20", 0 ],
-					"source" : [ "obj-19", 0 ]
+					"destination" : [ "obj-7", 0 ],
+					"source" : [ "obj-21", 1 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-42", 0 ],
-					"source" : [ "obj-2", 1 ]
+					"destination" : [ "obj-49", 0 ],
+					"source" : [ "obj-3", 2 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-19", 0 ],
-					"source" : [ "obj-25", 0 ]
+					"destination" : [ "obj-49", 0 ],
+					"source" : [ "obj-3", 1 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-17", 0 ],
+					"destination" : [ "obj-49", 0 ],
 					"source" : [ "obj-3", 0 ]
 				}
 
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 0 ],
+					"source" : [ "obj-32", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-47", 0 ],
+					"source" : [ "obj-35", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-6", 0 ],
+					"source" : [ "obj-36", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-36", 0 ],
+					"source" : [ "obj-37", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-21", 0 ],
+					"source" : [ "obj-38", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-7", 0 ],
+					"midpoints" : [ 231.5, 131.0, 415.5, 131.0 ],
+					"source" : [ "obj-38", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 1 ],
+					"order" : 0,
+					"source" : [ "obj-40", 0 ]
+				}
+
 			}
 , 			{
 				"patchline" : 				{
 					"destination" : [ "obj-2", 0 ],
+					"order" : 2,
 					"source" : [ "obj-40", 0 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-44", 0 ],
-					"source" : [ "obj-42", 0 ]
+					"destination" : [ "obj-51", 0 ],
+					"midpoints" : [ 282.5, 447.5, 339.0, 447.5 ],
+					"order" : 1,
+					"source" : [ "obj-40", 0 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-49", 0 ],
-					"source" : [ "obj-42", 2 ]
+					"destination" : [ "obj-48", 0 ],
+					"source" : [ "obj-41", 1 ]
 				}
 
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-49", 0 ],
+					"destination" : [ "obj-5", 0 ],
+					"midpoints" : [ 415.5, 358.500001549720764, 282.5, 358.500001549720764 ],
+					"source" : [ "obj-41", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 1 ],
 					"source" : [ "obj-42", 1 ]
 				}
 
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-44", 0 ],
+					"source" : [ "obj-42", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-38", 0 ],
+					"source" : [ "obj-43", 0 ]
+				}
+
 			}
 , 			{
 				"patchline" : 				{
@@ -641,6 +1028,13 @@
 					"source" : [ "obj-44", 0 ]
 				}
 
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-7", 0 ],
+					"source" : [ "obj-45", 0 ]
+				}
+
 			}
 , 			{
 				"patchline" : 				{
@@ -658,12 +1052,52 @@
 			}
 , 			{
 				"patchline" : 				{
-					"destination" : [ "obj-17", 0 ],
+					"destination" : [ "obj-47", 0 ],
+					"source" : [ "obj-51", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-14", 0 ],
+					"source" : [ "obj-6", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-41", 0 ],
 					"source" : [ "obj-7", 0 ]
 				}
 
 			}
- ]
+ ],
+		"parameters" : 		{
+			"obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-36" : [ "live.menu[1]", "live.menu", 0 ],
+			"parameterbanks" : 			{
+
+			}
+,
+			"inherited_shortname" : 1
+		}
+,
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+ ],
+		"autosave" : 0
 	}
 
 }
diff --git a/source/daisy.field.json b/source/daisy.field.json
index e566a0d..de2492e 100644
--- a/source/daisy.field.json
+++ b/source/daisy.field.json
@@ -1,5 +1,138 @@
 {
-    "audio_ins": [
+    "max_apps":8,
+	"defines": {
+		"OOPSY_TARGET_FIELD": 1
+	},
+	"labels": {
+		"params": {
+			"knob1": "dsy_knob1",
+			"knob2": "dsy_knob2",
+			"knob3": "dsy_knob3",
+			"knob4": "dsy_knob4",
+			"knob5": "dsy_knob5",
+			"knob6": "dsy_knob6",
+			"knob7": "dsy_knob7",
+			"knob8": "dsy_knob8",
+			"keyA1": "dsy_key9",
+			"keyA2": "dsy_key10",
+			"keyA3": "dsy_key11",
+			"keyA4": "dsy_key12",
+			"keyA5": "dsy_key13",
+			"keyA6": "dsy_key14",
+			"keyA7": "dsy_key15",
+			"keyA8": "dsy_key16",
+			"keyB1": "dsy_key1",
+			"keyB2": "dsy_key2",
+			"keyB3": "dsy_key3",
+			"keyB4": "dsy_key4",
+			"keyB5": "dsy_key5",
+			"keyB6": "dsy_key6",
+			"keyB7": "dsy_key7",
+			"keyB8": "dsy_key8",
+			"sw1": "dsy_switch1",
+			"sw2": "dsy_switch2",
+			"cv1": "dsy_cv_in1",
+			"cv2": "dsy_cv_in2",
+			"cv3": "dsy_cv_in3",
+			"cv4": "dsy_cv_in4",
+			"gate1": "dsy_gate_in1",
+
+			"key1": "dsy_key1",
+			"key2": "dsy_key2",
+			"key3": "dsy_key3",
+			"key4": "dsy_key4",
+			"key5": "dsy_key5",
+			"key6": "dsy_key6",
+			"key7": "dsy_key7",
+			"key8": "dsy_key8",
+			"key9": "dsy_key9",
+			"key10": "dsy_key10",
+			"key11": "dsy_key11",
+			"key12": "dsy_key12",
+			"key13": "dsy_key13",
+			"key14": "dsy_key14",
+			"key15": "dsy_key15",
+			"key16": "dsy_key16",
+			"ctrl1": "dsy_knob1",
+			"ctrl2": "dsy_knob2",
+			"ctrl3": "dsy_knob3",
+			"ctrl4": "dsy_knob4",
+			"ctrl5": "dsy_knob5",
+			"ctrl6": "dsy_knob6",
+			"ctrl7": "dsy_knob7",
+			"ctrl8": "dsy_knob8",
+			"switch1": "dsy_switch1",
+			"switch2": "dsy_switch2",
+
+			"knob": "dsy_knob1",
+			"key": "dsy_key1",
+			"ctrl": "dsy_knob1",
+			"cv": "dsy_cv_in1",
+			"gate": "dsy_gate_in1",
+			"switch": "dsy_switch1"
+		},
+		"outs": {
+			"cv": "dsy_cv_out1",
+			"cv1": "dsy_cv_out1",
+			"cv2": "dsy_cv_out2",
+			"gate": "dsy_gate_out1",
+			"gate1": "dsy_gate_out1"
+		},
+		"datas": {
+			"leds": "dsy_leds"
+		}
+	},
+	"inputs": {
+		"dsy_knob1": "hardware.GetKnobValue(hardware.KNOB_1)",
+		"dsy_knob2": "hardware.GetKnobValue(hardware.KNOB_2)",
+		"dsy_knob3": "hardware.GetKnobValue(hardware.KNOB_3)",
+		"dsy_knob4": "hardware.GetKnobValue(hardware.KNOB_4)",
+		"dsy_knob5": "hardware.GetKnobValue(hardware.KNOB_5)",
+		"dsy_knob6": "hardware.GetKnobValue(hardware.KNOB_6)",
+		"dsy_knob7": "hardware.GetKnobValue(hardware.KNOB_7)",
+		"dsy_knob8": "hardware.GetKnobValue(hardware.KNOB_8)",
+		"dsy_key1": "(hardware.KeyboardState(0)?1.f:0.f)",
+		"dsy_key2": "(hardware.KeyboardState(1)?1.f:0.f)",
+		"dsy_key3": "(hardware.KeyboardState(2)?1.f:0.f)",
+		"dsy_key4": "(hardware.KeyboardState(3)?1.f:0.f)",
+		"dsy_key5": "(hardware.KeyboardState(4)?1.f:0.f)",
+		"dsy_key6": "(hardware.KeyboardState(5)?1.f:0.f)",
+		"dsy_key7": "(hardware.KeyboardState(6)?1.f:0.f)",
+		"dsy_key8": "(hardware.KeyboardState(7)?1.f:0.f)",
+		"dsy_key9": "(hardware.KeyboardState(8)?1.f:0.f)",
+		"dsy_key10": "(hardware.KeyboardState(9)?1.f:0.f)",
+		"dsy_key11": "(hardware.KeyboardState(10)?1.f:0.f)",
+		"dsy_key12": "(hardware.KeyboardState(11)?1.f:0.f)",
+		"dsy_key13": "(hardware.KeyboardState(12)?1.f:0.f)",
+		"dsy_key14": "(hardware.KeyboardState(13)?1.f:0.f)",
+		"dsy_key15": "(hardware.KeyboardState(14)?1.f:0.f)",
+		"dsy_key16": "(hardware.KeyboardState(15)?1.f:0.f)",
+		"dsy_switch1": "(hardware.GetSwitch(0)->Pressed()?1.f:0.f)",
+		"dsy_switch2": "(hardware.GetSwitch(1)->Pressed()?1.f:0.f)",
+		"dsy_cv_in1": "hardware.GetCvValue(0)",
+		"dsy_cv_in2": "hardware.GetCvValue(1)",
+		"dsy_cv_in3": "hardware.GetCvValue(2)",
+		"dsy_cv_in4": "hardware.GetCvValue(3)",
+		"dsy_gate_in1": "(hardware.gate_in_.State()?1.f:0.f)"
+	},
+	"outputs": {
+		"dsy_cv_out1": {
+			"where":"main",
+			"setter": "dsy_dac_write(DSY_DAC_CHN1, $<name> * 4095)"
+		},
+		"dsy_cv_out2": {
+			"where":"main",
+			"setter": "dsy_dac_write(DSY_DAC_CHN2, $<name> * 4095)"
+		},
+		"dsy_gate_out1": {
+			"where":"audio",
+			"setter": "dsy_gpio_write(&hardware.gate_out_, $<name> > 0.f)"
+		}
+	},
+	"mainhandlers": {
+		"dsy_leds": "daisy.setFieldLedsFromData($<data>)"
+	},
+	"audio_ins": [
       "dsy_in1",
       "dsy_in2"
     ],
@@ -13,79 +146,5 @@
     "midi_outs": [
       "dsy_midi_out1"
     ],
-    "cv_ins": [
-      "cv_in1",
-      "cv_in2",
-      "cv_in3",
-      "cv_in4"
-    ],
-    "cv_outs": [
-      "cv_out1",
-      "cv_out2"
-	],
-	"knobs": [
-		"knob1",
-		"knob2",
-		"knob3",
-		"knob4",
-		"knob5",
-		"knob6",
-		"knob7",
-		"knob8"
-	],
-    "gate_ins": [
-      "gate_in1"
-    ],
-    "gate_outs": [
-      "gate_out1"
-	],
-	"leds": [
-		"led1",
-		"led2",
-		"led3",
-		"led4",
-		"led5",
-		"led6",
-		"led7",
-    	"led8",
-		"ledA1",
-		"ledA2",
-		"ledA3",
-		"ledA4",
-		"ledA5",
-		"ledA6",
-		"ledA7",
-    	"ledA8",
-		"ledB1",
-		"ledB2",
-		"ledB3",
-		"ledB4",
-		"ledB5",
-		"ledB6",
-		"ledB7",
-    	"ledB8"
-	],
-	"switches": [
-		"switch1",
-		"switch2"
-	],
-	"keys": [
-		"key1",
-		"key2",
-		"key3",
-		"key4",
-		"key5",
-		"key6",
-		"key7",
-		"key8",
-		"key9",
-		"key10",
-		"key11",
-		"key12",
-		"key13",
-		"key14",
-		"key15",
-		"key16"
-	],
 	"oled": true
 }
\ No newline at end of file
diff --git a/source/daisy.patch.json b/source/daisy.patch.json
index 4413663..f5b23d2 100644
--- a/source/daisy.patch.json
+++ b/source/daisy.patch.json
@@ -1,4 +1,59 @@
 {
+    "max_apps":8,
+	  "defines": {
+      "OOPSY_TARGET_PATCH": 1
+    },
+    "labels": {
+      "params": {
+        "cv1": "dsy_cv_in1",
+        "cv2": "dsy_cv_in2",
+        "cv3": "dsy_cv_in3",
+        "cv4": "dsy_cv_in4",
+        "gate1": "dsy_gate_in1",
+        "gate2": "dsy_gate_in2",
+
+        "cv": "dsy_cv_in1",
+        "ctrl": "dsy_cv_in1",
+        "ctrl1": "dsy_cv_in1",
+        "ctrl2": "dsy_cv_in2",
+        "ctrl3": "dsy_cv_in3",
+        "ctrl4": "dsy_cv_in4",
+        "gate": "dsy_gate_in1"
+      },
+      "outs": {
+        "cv1": "dsy_cv_out1",
+        "cv2": "dsy_cv_out2",
+        "gate1": "dsy_gate_out1",
+
+        "cv": "dsy_cv_out1",
+        "gate": "dsy_gate_out1"
+
+      },
+      "datas": {}
+    },
+    "inputs": {
+      "dsy_cv_in1": "hardware.GetCtrlValue(hardware.CTRL_1)",
+      "dsy_cv_in2": "hardware.GetCtrlValue(hardware.CTRL_2)",
+      "dsy_cv_in3": "hardware.GetCtrlValue(hardware.CTRL_3)",
+      "dsy_cv_in4": "hardware.GetCtrlValue(hardware.CTRL_4)",
+      "dsy_gate_in1": "(hardware.gate_input[hardware.GATE_IN_1].State()?1.f:0.f)",
+      "dsy_gate_in2": "(hardware.gate_input[hardware.GATE_IN_2].State()?1.f:0.f)"
+    },
+    "outputs": {
+      "dsy_cv_out1": {
+        "where": "main",
+        "setter": "dsy_dac_write(DSY_DAC_CHN1, $<name> * 4095)"
+      },
+      "dsy_cv_out2": {
+        "where": "main",
+        "setter": "dsy_dac_write(DSY_DAC_CHN2, $<name> * 4095)"
+      },
+      "dsy_gate_out1":  {
+        "where": "audio",
+        "setter": "dsy_gpio_write(&hardware.gate_output, $<name> > 0.f)"
+      }
+    },
+    "mainhandlers": {},
     "audio_ins": [
       "dsy_in1",
       "dsy_in2",
@@ -17,25 +72,5 @@
     "midi_outs": [
       "dsy_midi_out1"
     ],
-    "cv_ins": [
-      "cv_in1",
-      "cv_in2",
-      "cv_in3",
-      "cv_in4"
-    ],
-    "cv_outs": [
-      "cv_out1",
-      "cv_out2"
-    ],
-    "gate_ins": [
-      "gate_in1",
-      "gate_in2"
-    ],
-    "gate_outs": [
-      "gate_out1"
-    ],
-    "encoder": [
-      "encoder1"
-    ],
     "oled": true
 }
\ No newline at end of file
diff --git a/source/daisy.petal.json b/source/daisy.petal.json
index b20670c..1da51fa 100644
--- a/source/daisy.petal.json
+++ b/source/daisy.petal.json
@@ -1,5 +1,89 @@
 {
-    "audio_ins": [
+    "max_apps":8,
+	"defines": {
+		"OOPSY_TARGET_PETAL": 1
+	},
+	"labels": {
+		"params": {
+			"knob1": "dsy_knob1",
+			"knob2": "dsy_knob2",
+			"knob3": "dsy_knob3",
+			"knob4": "dsy_knob4",
+			"knob5": "dsy_knob5",
+			"knob6": "dsy_knob6",
+			"sw1": "dsy_switch1",
+			"sw2": "dsy_switch2",
+			"sw3": "dsy_switch3",
+			"sw4": "dsy_switch4",
+			"sw5": "dsy_switch5",
+			"sw6": "dsy_switch6",
+			"sw7": "dsy_switch7",
+			"exp1": "dsy_exp1",
+
+			"ctrl1": "dsy_knob1",
+			"ctrl2": "dsy_knob2",
+			"ctrl3": "dsy_knob3",
+			"ctrl4": "dsy_knob4",
+			"ctrl5": "dsy_knob5",
+			"ctrl6": "dsy_knob6",
+			"switch1": "dsy_switch1",
+			"switch2": "dsy_switch2",
+			"switch3": "dsy_switch3",
+			"switch4": "dsy_switch4",
+			"switch5": "dsy_switch5",
+			"switch6": "dsy_switch6",
+			"switch7": "dsy_switch7",
+			"knob": "dsy_knob1",
+			"ctrl": "dsy_knob1",
+			"switch": "dsy_switch1",
+			"exp": "dsy_exp1",
+			"expression": "dsy_exp1"
+		},
+		"outs": {
+			"led1": "dsy_footswitch_led1",
+			"led2": "dsy_footswitch_led2",
+			"led3": "dsy_footswitch_led3",
+			"led4": "dsy_footswitch_led4"
+		},
+		"datas": {}
+	},
+	"inputs": {
+		"dsy_knob1": "hardware.GetKnobValue(hardware.KNOB_1)",
+		"dsy_knob2": "hardware.GetKnobValue(hardware.KNOB_2)",
+		"dsy_knob3": "hardware.GetKnobValue(hardware.KNOB_3)",
+		"dsy_knob4": "hardware.GetKnobValue(hardware.KNOB_4)",
+		"dsy_knob5": "hardware.GetKnobValue(hardware.KNOB_5)",
+		"dsy_knob6": "hardware.GetKnobValue(hardware.KNOB_6)",
+		"dsy_switch1": "(hardware.switches[0].Pressed()?1.f:0.f)",
+		"dsy_switch2": "(hardware.switches[1].Pressed()?1.f:0.f)",
+		"dsy_switch3": "(hardware.switches[2].Pressed()?1.f:0.f)",
+		"dsy_switch4": "(hardware.switches[3].Pressed()?1.f:0.f)",
+		"dsy_switch5": "(hardware.switches[4].Pressed()?1.f:0.f)",
+		"dsy_switch6": "(hardware.switches[5].Pressed()?1.f:0.f)",
+		"dsy_switch7": "(hardware.switches[6].Pressed()?1.f:0.f)",
+		"dsy_exp1": "(hardware.GetExpression())"
+	},
+	"outputs": {
+		"dsy_footswitch_led1": {
+			"where": "display",
+			"setter": "hardware.SetFootswitchLed(daisy::DaisyPetal::FOOTSWITCH_LED_1, $<name>)"
+		},
+		"dsy_footswitch_led2": {
+			"where": "display",
+			"setter": "hardware.SetFootswitchLed(daisy::DaisyPetal::FOOTSWITCH_LED_2, $<name>)"
+		},
+		"dsy_footswitch_led3": {
+			"where": "display",
+			"setter": "hardware.SetFootswitchLed(daisy::DaisyPetal::FOOTSWITCH_LED_3, $<name>)"
+		},
+		"dsy_footswitch_led4": {
+			"where": "display",
+			"setter": "hardware.SetFootswitchLed(daisy::DaisyPetal::FOOTSWITCH_LED_4, $<name>)"
+		}
+	},
+    "mainhandlers": {
+	},
+	"audio_ins": [
       "dsy_in1",
       "dsy_in2"
     ],
@@ -8,42 +92,5 @@
       "dsy_out2"
     ],
     "midi_ins": [],
-    "midi_outs": [],
-    "cv_ins": [],
-    "cv_outs": [],
-    "gate_ins": [],
-    "gate_outs": [],
-	"knobs": [
-		"knob1",
-		"knob2",
-		"knob3",
-		"knob4",
-		"knob5",
-		"knob6"
-	],
-	"switches": [
-		"switch1",
-		"switch2",
-		"switch3",
-		"switch4",
-		"switch5",
-		"switch6",
-		"switch7"
-	],
-	"expression": [
-		"exp1"
-	],
-	"encoder": [
-		"encoder1"
-	],
-	"leds": [
-		"led1",
-		"led2",
-		"led3",
-		"led4",
-		"led5",
-		"led6",
-		"led7",
-		"led8"
-	]
+    "midi_outs": []
 }
\ No newline at end of file
diff --git a/source/daisy.pod.json b/source/daisy.pod.json
index f2ae002..fa258cf 100644
--- a/source/daisy.pod.json
+++ b/source/daisy.pod.json
@@ -1,5 +1,55 @@
 {
-    "audio_ins": [
+    "max_apps":1,
+	"defines": {
+		"OOPSY_TARGET_POD": 1
+	},
+	"labels": {
+		"params": {
+			"knob1": "dsy_knob1",
+			"knob2": "dsy_knob2",
+			"sw1": "dsy_switch1",
+			"sw2": "dsy_switch2",
+			"sw3": "dsy_encoder_switch",
+			"encoder": "dsy_encoder_incr",
+
+			"ctrl1": "dsy_knob1",
+			"ctrl2": "dsy_knob2",
+			"switch1": "dsy_switch1",
+			"switch2": "dsy_switch2",
+			"switch3": "dsy_encoder_switch",
+			"knob": "dsy_knob1",
+			"ctrl": "dsy_knob1",
+			"switch": "dsy_switch1",
+			"press": "dsy_encoder_switch"
+		},
+		"outs": {
+			"led1": "dsy_led1",
+			"led2": "dsy_led2",
+
+			"led": "dsy_led1"
+		},
+		"datas": {}
+	},
+	"inputs": {
+		"dsy_knob1": "hardware.GetKnobValue(hardware.KNOB_1)",
+		"dsy_knob2": "hardware.GetKnobValue(hardware.KNOB_2)",
+		"dsy_switch1": "(hardware.button1.Pressed()?1.f:0.f)",
+		"dsy_switch2": "(hardware.button2.Pressed()?1.f:0.f)",
+		"dsy_encoder_incr": "(hardware.encoder.Increment())",
+		"dsy_encoder_switch": "(hardware.encoder.Pressed())"
+	},
+	"outputs": {
+		"dsy_led1": {
+			"where": "audio",
+			"setter": "hardware.led1.Set(clamp(-$<name>, 0.f, 1.f), clamp($<name>, 0.f, 1.f), 0.f)"
+		},
+		"dsy_led2": {
+			"where": "audio",
+			"setter": "hardware.led2.Set(clamp(-$<name>, 0.f, 1.f), clamp($<name>, 0.f, 1.f), 0.f)"
+		}
+	},
+    "mainhandlers": {},
+	"audio_ins": [
       "dsy_in1",
       "dsy_in2"
     ],
@@ -10,24 +60,5 @@
     "midi_ins": [
       "dsy_midi_in1"
     ],
-    "midi_outs": [],
-	"switches": [
-		"switch1",
-		"switch2"
-	],
-	"cv_ins": [],
-	"cv_outs": [],
-	"gate_ins": [],
-	"gate_outs": [],
-	"knobs": [
-		"knob1",
-		"knob2"
-	],
-	"encoder": [
-		"encoder1"
-	],
-	"leds": [
-		"led1",
-		"led2"
-	]
+    "midi_outs": []
 }
\ No newline at end of file
diff --git a/source/daisy.versio.json b/source/daisy.versio.json
new file mode 100644
index 0000000..bfa5673
--- /dev/null
+++ b/source/daisy.versio.json
@@ -0,0 +1,81 @@
+{
+	"max_apps":1,
+	"defines": {
+		"OOPSY_TARGET_VERSIO": 1
+	},
+	"labels": {
+		"params": {
+			"knob1": "dsy_knob1",
+			"knob2": "dsy_knob2",
+			"knob3": "dsy_knob3",
+			"knob4": "dsy_knob4",
+			"knob5": "dsy_knob5",
+			"knob6": "dsy_knob6",
+			"knob7": "dsy_knob7",
+			"button1": "dsy_button1",
+			"sw1": "dsy_switch1",
+			"sw2": "dsy_switch2",
+			"gate1": "dsy_gate_in1",
+
+			"cv1": "dsy_knob1",
+			"cv2": "dsy_knob2",
+			"cv3": "dsy_knob3",
+			"cv4": "dsy_knob4",
+			"cv5": "dsy_knob5",
+			"cv6": "dsy_knob6",
+			"cv7": "dsy_knob7",
+			"ctrl1": "dsy_knob1",
+			"ctrl2": "dsy_knob2",
+			"ctrl3": "dsy_knob3",
+			"ctrl4": "dsy_knob4",
+			"ctrl5": "dsy_knob5",
+			"ctrl6": "dsy_knob6",
+			"ctrl7": "dsy_knob7",
+			"switch1": "dsy_switch1",
+			"switch2": "dsy_switch2",
+
+			"knob": "dsy_knob1",
+			"button": "dsy_button1",
+			"ctrl": "dsy_knob1",
+			"cv": "dsy_knob1",
+			"switch": "dsy_switch1",
+			"gate": "dsy_gate_in1",
+
+
+			"tap": "dsy_button1",
+			"fsu": "dsy_button1",
+			"abc": "dsy_switch1",
+			"xyz": "dsy_switch2"
+			
+		},
+		"outs": {
+
+		},
+		"datas": {}
+	},
+	"inputs": {
+		"dsy_knob1": "hardware.GetKnobValue(hardware.KNOB_0)",
+		"dsy_knob2": "hardware.GetKnobValue(hardware.KNOB_1)",
+		"dsy_knob3": "hardware.GetKnobValue(hardware.KNOB_2)",
+		"dsy_knob4": "hardware.GetKnobValue(hardware.KNOB_3)",
+		"dsy_knob5": "hardware.GetKnobValue(hardware.KNOB_4)",
+		"dsy_knob6": "hardware.GetKnobValue(hardware.KNOB_5)",
+		"dsy_knob7": "hardware.GetKnobValue(hardware.KNOB_6)",
+		"dsy_switch1": "(hardware.sw_[0].Read())",
+		"dsy_switch1": "(hardware.sw_[1].Read())",
+		"dsy_button1": "(hardware.SwitchPressed()?1.f:0.f)",
+		"dsy_gate_in1": "(hardware.Gate()?1.f:0.f)"
+	},
+	"outputs": {},
+    "mainhandlers": {},
+	"audio_ins": [
+      "dsy_in1",
+      "dsy_in2"
+    ],
+    "audio_outs": [
+      "dsy_out1",
+      "dsy_out2"
+    ],
+    "midi_ins": [],
+    "midi_outs": []
+}
\ No newline at end of file
diff --git a/source/gen_dsp/genlib_exportfunctions.h b/source/gen_dsp/genlib_exportfunctions.h
index 9ef7b66..5647e8c 100644
--- a/source/gen_dsp/genlib_exportfunctions.h
+++ b/source/gen_dsp/genlib_exportfunctions.h
@@ -34,7 +34,7 @@ void genlib_sysmem_copyptr(const void *src, void *dst, t_ptr_size bytes);
 void genlib_report_error(const char *s);
 void genlib_report_message(const char *s);
 void genlib_set_zero64(t_sample *mem, long size);
-
+unsigned long genlib_ticks();
 void genlib_init();
 void genlib_info();
 
diff --git a/source/gen_dsp/genlib_ops.h b/source/gen_dsp/genlib_ops.h
index 79fb796..0b67db7 100644
--- a/source/gen_dsp/genlib_ops.h
+++ b/source/gen_dsp/genlib_ops.h
@@ -24,6 +24,8 @@ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLI
 #ifndef GENLIB_OPS_H
 #define GENLIB_OPS_H 1
 
+#include "genlib_exportfunctions.h"
+
 #ifndef MSP_ON_CLANG
 #	include <cmath>
 #endif
@@ -95,6 +97,7 @@ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLI
 
 #define GENLIB_QUANT(f1,f2)			t_sample(floor((f1)*(f2)+0.5)/(f2))
 
+
 inline t_sample genlib_isnan(t_sample v) { return GENLIB_IS_NAN(v); }
 inline t_sample fixnan(t_sample v) { return GENLIB_FIX_NAN(v); }
 inline t_sample fixdenorm(t_sample v) { return GENLIB_FIX_DENORM(v); }
diff --git a/source/genlib_daisy.h b/source/genlib_daisy.h
index 29f1e1d..f110332 100644
--- a/source/genlib_daisy.h
+++ b/source/genlib_daisy.h
@@ -3,71 +3,71 @@
 
 #include "daisy.h"
 #include "genlib.h"
+#include "genlib_ops.h"
 #include "genlib_exportfunctions.h"
 #include <math.h>
 #include <string>
 #include <cstring> // memset
 #include <stdarg.h> // vprintf
 
+#if defined(OOPSY_TARGET_PATCH)
+	#include "daisy_patch.h"
+	#define OOPSY_IO_COUNT (4)
+	typedef daisy::DaisyPatch Daisy;
 
-#if defined(GEN_DAISY_TARGET_PATCH)
-#include "daisy_patch.h"
-#define GEN_DAISY_TARGET_HAS_OLED 1
-#define GEN_DAISY_IO_COUNT (4)
-typedef daisy::DaisyPatch Daisy;
+#elif defined(OOPSY_TARGET_FIELD)
+	#include "daisy_field.h"
+	#define OOPSY_IO_COUNT (2)
+	typedef daisy::DaisyField Daisy;
 
-#elif defined(GEN_DAISY_TARGET_FIELD)
-#include "daisy_field.h"
-#define GEN_DAISY_TARGET_HAS_OLED 1
-#define GEN_DAISY_IO_COUNT (2)
-typedef daisy::DaisyField Daisy;
+#elif defined(OOPSY_TARGET_PETAL)
+	#include "daisy_petal.h"
+	#define OOPSY_IO_COUNT (2)
+	typedef daisy::DaisyPetal Daisy;
 
-#elif defined(GEN_DAISY_TARGET_PETAL)
-#include "daisy_petal.h"
-#define GEN_DAISY_IO_COUNT (2)
-typedef daisy::DaisyPetal Daisy;
+#elif defined(OOPSY_TARGET_POD)
+	#include "daisy_pod.h"
+	#define OOPSY_IO_COUNT (2)
+	typedef daisy::DaisyPod Daisy;
 
-#elif defined(GEN_DAISY_TARGET_POD)
-#include "daisy_pod.h"
-#define GEN_DAISY_IO_COUNT (2)
-typedef daisy::DaisyPod Daisy;
+#elif defined(OOPSY_TARGET_VERSIO)
+	#include "daisy_versio.h"
+	#define OOPSY_IO_COUNT (2)
+	typedef daisy::DaisyVersio Daisy;
 
 #else 
-#include "daisy_seed.h"
-#define GEN_DAISY_IO_COUNT (2)
-typedef daisy::DaisySeed Daisy;
+	#include "daisy_seed.h"
+	#define OOPSY_IO_COUNT (2)
+	typedef daisy::DaisySeed Daisy;
 
 #endif
 
-
 ////////////////////////// DAISY EXPORT INTERFACING //////////////////////////
 
-#define GEN_DAISY_BUFFER_SIZE 48
-#define GEN_DAISY_MIDI_BUFFER_SIZE 64
-#define GEN_DAISY_LONG_PRESS_MS 250
-#define GEN_DAISY_DISPLAY_PERIOD_MS 20
-static const uint32_t GEN_DAISY_SRAM_SIZE = 512 * 1024; 
-static const uint32_t GEN_DAISY_SDRAM_SIZE = 64 * 1024 * 1024;
-
+#define OOPSY_BUFFER_SIZE 48
+#define OOPSY_MIDI_BUFFER_SIZE 64
+#define OOPSY_LONG_PRESS_MS 250
+#define OOPSY_DISPLAY_PERIOD_MS 10
+#define OOPSY_SCOPE_MAX_ZOOM (9)
+static const uint32_t OOPSY_SRAM_SIZE = 512 * 1024; 
+static const uint32_t OOPSY_SDRAM_SIZE = 64 * 1024 * 1024;
 
-namespace gendaisylib {
-
-	char * sram_pool = nullptr;
-	char DSY_SDRAM_BSS sdram_pool[GEN_DAISY_SDRAM_SIZE];
+namespace oopsy {
 
 	uint32_t sram_used = 0, sram_usable = 0;
 	uint32_t sdram_used = 0, sdram_usable = 0;
+	char * sram_pool = nullptr;
+	char DSY_SDRAM_BSS sdram_pool[OOPSY_SDRAM_SIZE];
 
 	void init() {
-		if (!sram_pool) sram_pool = (char *)malloc(GEN_DAISY_SRAM_SIZE);
-		sram_usable = GEN_DAISY_SRAM_SIZE;
+		if (!sram_pool) sram_pool = (char *)malloc(OOPSY_SRAM_SIZE);
+		sram_usable = OOPSY_SRAM_SIZE;
 		sram_used = 0;
-		sdram_usable = GEN_DAISY_SDRAM_SIZE;
+		sdram_usable = OOPSY_SDRAM_SIZE;
 		sdram_used = 0;
 	}
 
 	void * allocate(uint32_t size) {
-		//console.log("alloc %d/%d", size, sram_usable);
 		if (size < sram_usable) {
 			void * p = sram_pool + sram_used;
 			sram_used += size;
@@ -85,8 +85,7 @@ namespace gendaisylib {
 	void memset(void *p, int c, long size) {
 		char *p2 = (char *)p;
 		int i;
-		for (i = 0; i < size; i++, p2++)
-			*p2 = char(c);
+		for (i = 0; i < size; i++, p2++) *p2 = char(c);
 	}
 
 	// void genlib_memcpy(void *dst, const void *src, long size) {
@@ -107,529 +106,636 @@ namespace gendaisylib {
 	// 		void * m = malloc(sz * 1024);
 	// 		if (!m) break;
 	// 		free(m);
-	// 		console.log("%d: malloced %dk", i, sz);
+	// 		log("%d: malloced %dk", i, sz);
 	// 		i++;
 	// 	}
-	// 	console.log("all OK");
+	// 	log("all OK");
 	// }
-};
-
-
-struct Timer {
-	int32_t period = GEN_DAISY_DISPLAY_PERIOD_MS, t=0;
-
-	bool ready(int32_t dt) {
-		t += dt;
-		if (t > period) {
-			t = 0;
-			return true;
-		}
-		return false;
-	}
-};
 
+	struct Timer {
+		int32_t period = OOPSY_DISPLAY_PERIOD_MS, 
+				t = OOPSY_DISPLAY_PERIOD_MS;
 
-struct MidiUart {
-	daisy::UartHandler uart;
-	uint8_t in_written = 0, out_written = 0;
-	uint8_t in_active = 0, out_active = 0;
-	uint8_t out_data[GEN_DAISY_MIDI_BUFFER_SIZE];
-	float in_data[GEN_DAISY_BUFFER_SIZE];
-
-	void init() {
-		uart.Init(); 
-		uart.StartRx();
-	}
-
-	void preperform(size_t size) {
-		// fill remainder of midi buffer with non-data:
-		for (size_t i=in_written; i<size; i++) in_data[i] = -0.1f;
-		// done with midi input:
-		in_written = 0;
-	}
-
-	void postperform(float * buf, size_t size) {
-		for (size_t i=0; i<size && out_written < GEN_DAISY_MIDI_BUFFER_SIZE; i++) {
-			if (buf[i] >= 0.f) {
-				// scale (0.0, 1.0) back to (0, 255) for MIDI bytes
-				out_data[out_written++] = buf[i] * 256.0f;
-				out_active = 1;
-			}
-		}
-	}
-
-	void mainloop() {
-		// input:
-		while(uart.Readable()) {
-			uint8_t byte = uart.PopRx();
-			if (in_written < GEN_DAISY_BUFFER_SIZE) {
-				// scale (0, 255) to (0.0, 1.0)
-				// to protect hardware from accidental patching
-				in_data[in_written] = byte / 256.0f;
-				in_written++;
+		bool ready(int32_t dt) {
+			t += dt;
+			if (t > period) {
+				t = 0;
+				return true;
 			}
-			in_active = 1;
-		}
-		// output:
-		if (out_written) {
-			if (0 == uart.PollTx(out_data, out_written)) out_written = 0;
-		}
-	}
-};
-
-
-#if defined(GEN_DAISY_TARGET_HAS_OLED)
-#define GEN_DAISY_SCOPE_MAX_ZOOM (9)
-struct Console {
-	FontDef& font = Font_6x8;
-	uint_fast8_t scope_zoom = 5; 
-	uint_fast8_t scope_step = 0;
-	uint16_t console_cols, console_rows, console_line;
-	char * console_stats;
-	char * console_memory;
-	char ** console_lines;
-	float scope_data[SSD1309_WIDTH*2]; // 128 pixels
-	char scope_label[11];
-
-	Console& init() {
-		console_cols = SSD1309_WIDTH / font.FontWidth + 1; // +1 to accommodate null terminators.
-		console_rows = SSD1309_HEIGHT / font.FontHeight - 1; // leave one row free for stats
-		console_memory = (char *)calloc(console_cols, console_rows);
-		console_stats = (char *)calloc(console_cols, 1);
-		for (int i=0; i<console_rows; i++) {
-			console_lines[i] = &console_memory[i*console_cols];
-		}
-		console_line = console_rows-1;
-		return *this;
-	}
-
-	Console& newline() {
-		console_line = (console_line + 1) % console_rows;
-		return *this;
-	}
-
-	Console& log(const char * fmt, ...) {
-		va_list argptr;
-		va_start(argptr, fmt);
-		vsnprintf(console_lines[console_line], console_cols, fmt, argptr);
-		va_end(argptr);
-		newline();
-		return *this;
-	}
-
-	Console& display(daisy::OledDisplay& oled) {
-		for (int i=0; i<console_rows; i++) {
-			oled.SetCursor(0, font.FontHeight * i);
- 			oled.WriteString(console_lines[(i+console_line) % console_rows], font, true);
-		}
-		return *this;
-	}
-
-	Console& status_display(daisy::OledDisplay& oled) {
-		// stats:
-		oled.SetCursor(0, font.FontHeight * console_rows);
-		oled.WriteString(console_stats, font, true);
-		return *this;
-	}
-
-	int scope_samples() {
-		// valid zoom sizes: 1, 2, 3, 4, 6, 8, 12, 16, 24
-		switch(scope_zoom) {
-			case 1: case 2: case 3: case 4: return scope_zoom; break;
-			case 5: return 6; break;
-			case 6: return 8; break;
-			case 7: return 12; break;
-			case 8: return 16; break;
-			default: return 24; break;
-		}
-	}
-
-	Console&  scope_increment(int incr) {
-		if (incr > 0) {
-			scope_zoom = scope_zoom + 1;
-			if (scope_zoom > GEN_DAISY_SCOPE_MAX_ZOOM) scope_zoom = 1;
-		} else if (incr < 0) {
-			scope_zoom = scope_zoom - 1;
-			if (scope_zoom < 1) scope_zoom = GEN_DAISY_SCOPE_MAX_ZOOM;
+			return false;
 		}
-		return *this;
-	} 
-
-	Console&  scope_store(float * buf, size_t size, float samplerate) {
-		size_t samples = scope_samples();
-		for (size_t i=0; i<size/samples; i++) {
-			float min0 = 1.f, max0 = -1.f;
-			float min1 = 1.f, max1 = -1.f;
-			for (size_t j=0; j<samples; j++) {
-				float pt0 = *buf++;
-				min0 = min0 > pt0 ? pt0 : min0;
-				max0 = max0 < pt0 ? pt0 : max0;
-			}
-			scope_data[scope_step] = (min0);
-			scope_step++;
-			scope_data[scope_step] = (max0); 
-			scope_step++;
-			//console.log("m1 %d %d", int(min1 * 10), int(max1 * 10));
-			if (scope_step >= SSD1309_WIDTH*2) scope_step = 0;
-		}
-		return *this;
-	}
-
-	Console&  scope_display(daisy::OledDisplay& oled, float samplerate) {
-		uint8_t h = SSD1309_HEIGHT - font.FontHeight;
-		oled.Fill(false);
-		for (uint_fast8_t i=0; i<SSD1309_WIDTH; i++) {
-		 	int j = i*2;
-			oled.DrawLine(i, (1.f-scope_data[j])*(h/2), i, (1.f-scope_data[j+1])*(h/2), 1);
-		}
-		size_t samples = scope_samples();
-		// each pixel is zoom samples; zoom/samplerate seconds
-		float scope_duration = SSD1309_WIDTH*(1000.f*samples/samplerate);
-		
-		snprintf(scope_label, 10, "%dx=%dms", samples, (int)ceilf(scope_duration));
-		oled.SetCursor(SSD1309_WIDTH - font.FontWidth*strlen(scope_label), h);
-		oled.WriteString(scope_label, font, true);
-		return *this;
-	}
-};
-
-#else // GEN_DAISY_TARGET_HAS_OLED
-
-struct Console {
-	Console&  init() { return *this; }
-	Console&  newline() {return *this; }
-	Console&  log(const char * fmt, ...) {return *this; }
-	Console&  display(daisy::OledDisplay& oled) {return *this; }
-};
-
-#endif // GEN_DAISY_TARGET_HAS_OLED
+	};
 
-struct GenDaisy {
+	struct AppDef {
+		const char * name;
+		void (*load)();
+	};
 
 	typedef enum {
 		MODE_NONE = 0,
-		#ifdef GEN_DAISY_MULTI_APP
+		#ifdef OOPSY_MULTI_APP
 		MODE_MENU,
 		#endif
 
-		#ifdef GEN_DAISY_TARGET_HAS_OLED
+		#ifdef OOPSY_TARGET_HAS_OLED
 		MODE_CONSOLE,
 		MODE_SCOPE,
+		//MODE_PARAMS,
 		#endif
 
 		MODE_COUNT
 	} Mode;
 
-	struct AppDef {
-		const char * name;
-		void (*load)();
-	};
+	#ifdef OOPSY_TARGET_USES_MIDI_UART
+	struct {
+		daisy::UartHandler uart;
+		uint8_t in_written = 0, out_written = 0;
+		uint8_t in_active = 0, out_active = 0;
+		uint8_t out_data[OOPSY_MIDI_BUFFER_SIZE];
+		float in_data[OOPSY_BUFFER_SIZE];
+
+		void init() {
+			uart.Init(); 
+			uart.StartRx();
+		}
 
-	Daisy hardware;
-	AppDef * appdefs = nullptr;
+		void preperform(size_t size) {
+			// fill remainder of midi buffer with non-data:
+			for (size_t i=in_written; i<size; i++) in_data[i] = -0.1f;
+			// done with midi input:
+			in_written = 0;
+		}
 
-	int mode, mode_default;
+		void postperform(float * buf, size_t size) {
+			for (size_t i=0; i<size && out_written < OOPSY_MIDI_BUFFER_SIZE; i++) {
+				if (buf[i] >= 0.f) {
+					// scale (0.0, 1.0) back to (0, 255) for MIDI bytes
+					out_data[out_written++] = buf[i] * 256.0f;
+					out_active = 1;
+				}
+			}
+		}
+
+		// void fromData(Data& data) {
+		// 	// this might need a reset:
+		// 	static long data_read = 0;
+		// 	while (out_written < OOPSY_MIDI_BUFFER_SIZE) {
+		// 		double b = data.mData[data_read];
+		// 		if (b < 0.) break;
+
+		// 		out_data[out_written++] = b * 256.0;
+		// 		out_active = 1;
+		// 		data_read++; if (data_read >= data.dim) data_read = 0;
+		// 	}
+		// }
+
+		void mainloop() {
+			// input:
+			while(uart.Readable()) {
+				uint8_t byte = uart.PopRx();
+				if (in_written < OOPSY_BUFFER_SIZE) {
+					// scale (0, 255) to (0.0, 1.0)
+					// to protect hardware from accidental patching
+					in_data[in_written] = byte / 256.0f;
+					in_written++;
+				}
+				in_active = 1;
+			}
+			// output:
+			if (out_written) {
+				if (0 == uart.PollTx(out_data, out_written)) out_written = 0;
+			}
+		}
+	} midi;
+	#endif
 
-	int app_count = 1;
-	int app_selected = 0, app_selecting = 0;
-	
-	int encoder_held = 0, encoder_held_ms = 0, encoder_released = 0, encoder_incr = 0;
+	struct GenDaisy {
 
-	int is_mode_selecting = 0;
+		Daisy hardware;
+		AppDef * appdefs = nullptr;
 
+		int mode, mode_default;
+		int app_count = 1, app_selected = 0, app_selecting = 0;
+		int menu_button_held = 0, menu_button_released = 0, menu_button_held_ms = 0, menu_button_incr = 0;
+		int is_mode_selecting = 0;
 
-	uint32_t t = 0, dt = 10;
-	Timer uitimer;
+		uint32_t t = 0, dt = 10;
+		Timer uitimer;
 
-	// microseconds spent in audio callback
-	uint32_t audioCpuUs = 0; 
+		// microseconds spent in audio callback
+		uint32_t audioCpuUs = 0; 
 
-	float samplerate; // default 48014
-	size_t blocksize; // default 48
+		float samplerate; // default 48014
+		size_t blocksize; // default 48
 
-	#ifdef GEN_DAISY_TARGET_USES_MIDI_UART
-	MidiUart midi;
-	#endif
-	
-	Console console;
-
-	void (*mainloopCallback)(uint32_t t, uint32_t dt);
-	void * app = nullptr;
-	void * gen = nullptr;
-	bool nullAudioCallbackRunning = false;
-
-	template<typename A>
-	void reset(A& newapp) {
-		// first, remove callbacks:
-		mainloopCallback = nullMainloopCallback;
-		nullAudioCallbackRunning = false;
-		hardware.ChangeAudioCallback(nullAudioCallback);
-		while (!nullAudioCallbackRunning) dsy_system_delay(10);
-		// reset memory
-		gendaisylib::init();
-		// install new app:
-		app = &newapp;
-		newapp.init(*this);
-		// install new callbacks:
-		mainloopCallback = newapp.staticMainloopCallback;
-		hardware.ChangeAudioCallback(newapp.staticAudioCallback);
-		//console.log("app loaded");
+		void (*mainloopCallback)(uint32_t t, uint32_t dt);
+		void (*displayCallback)(uint32_t t, uint32_t dt);
+		void * app = nullptr;
+		void * gen = nullptr;
+		bool nullAudioCallbackRunning = false;
 		
-		console.log("loaded %s", appdefs[app_selected].name);
-		console.log("%d/%dK+%d/%dM", gendaisylib::sram_used/1024, GEN_DAISY_SRAM_SIZE/1024, gendaisylib::sdram_used/1048576, GEN_DAISY_SDRAM_SIZE/1048576);
-	}
+		#ifdef OOPSY_TARGET_HAS_OLED
+
+		enum {
+			SCOPESTYLE_OVERLAY = 0,
+			SCOPESTYLE_TOPBOTTOM,
+			SCOPESTYLE_LEFTRIGHT,
+			SCOPESTYLE_LISSAJOUS,
+			SCOPESTYLE_COUNT
+		} ScopeStyles;
+
+		enum {
+			SCOPEOPTION_STYLE = 0,
+			SCOPEOPTION_SOURCE,
+			SCOPEOPTION_ZOOM,
+			SCOPEOPTION_COUNT
+		} ScopeOptions;
+		
+		FontDef& font = Font_6x8;
+		uint_fast8_t scope_zoom = 3; 
+		uint_fast8_t scope_step = 0; 
+		uint_fast8_t scope_option = 0, scope_source = 0, scope_style = 0;
+		uint16_t console_cols, console_rows, console_line;
+		char * console_stats;
+		char * console_memory;
+		char ** console_lines;
+		float scope_data[SSD1309_WIDTH*2][2]; // 128 pixels
+		char scope_label[11];
+		#endif // OOPSY_TARGET_HAS_OLED
+
+		template<typename A>
+		void reset(A& newapp) {
+			// first, remove callbacks:
+			mainloopCallback = nullMainloopCallback;
+			displayCallback = nullMainloopCallback;
+			nullAudioCallbackRunning = false;
+			hardware.ChangeAudioCallback(nullAudioCallback);
+			while (!nullAudioCallbackRunning) dsy_system_delay(10);
+			// reset memory
+			oopsy::init();
+			// install new app:
+			app = &newapp;
+			newapp.init(*this);
+			// install new callbacks:
+			mainloopCallback = newapp.staticMainloopCallback;
+			displayCallback = newapp.staticDisplayCallback;
+			hardware.ChangeAudioCallback(newapp.staticAudioCallback);
+			log("loaded gen~ %s", appdefs[app_selected].name);
+			log("%d/%dK+%d/%dM", oopsy::sram_used/1024, OOPSY_SRAM_SIZE/1024, oopsy::sdram_used/1048576, OOPSY_SDRAM_SIZE/1048576);
+		}
+
+		int run(AppDef * appdefs, int count) {
+			this->appdefs = appdefs;
+			app_count = count;
+			
+			mode_default = (Mode)(MODE_COUNT-1);
+			mode = mode_default;
+
+			hardware.Init(); 
+			samplerate = hardware.AudioSampleRate(); // default 48014
+			blocksize = hardware.AudioBlockSize();  // default 48
+			
+			#ifdef OOPSY_TARGET_HAS_OLED
+			console_cols = SSD1309_WIDTH / font.FontWidth + 1; // +1 to accommodate null terminators.
+			console_rows = SSD1309_HEIGHT / font.FontHeight; 
+			console_memory = (char *)calloc(console_cols, console_rows);
+			console_stats = (char *)calloc(console_cols, 1);
+			for (int i=0; i<console_rows; i++) {
+				console_lines[i] = &console_memory[i*console_cols];
+			}
+			console_line = console_rows-1;
+			#endif
 
-	int run(AppDef * appdefs, int count) {
-		this->appdefs = appdefs;
+			hardware.StartAdc();
+			hardware.StartAudio(nullAudioCallback);
+			mainloopCallback = nullMainloopCallback;
+			displayCallback = nullMainloopCallback;
 
-		mode_default = (Mode)(MODE_COUNT-1);
-		mode = mode_default;
+			#ifdef OOPSY_TARGET_USES_MIDI_UART
+			midi.init(); 
+			#endif
 
-		hardware.Init(); 
-		#ifdef GEN_DAISY_TARGET_FIELD
-		samplerate = hardware.SampleRate(); // default 48014
-		blocksize = hardware.BlockSize();  // default 48
-		#else
-		samplerate = hardware.AudioSampleRate(); // default 48014
-		blocksize = hardware.AudioBlockSize();  // default 48
-		#endif
-		app_count = count;
-		console.init();
+			app_selected = 0;
+			appdefs[app_selected].load();
 
-		hardware.StartAdc();
-		hardware.StartAudio(nullAudioCallback);
-		mainloopCallback = nullMainloopCallback;
+			#ifdef OOPSY_TARGET_HAS_OLED
+			console_display();
+			#endif 
 
-		#ifdef GEN_DAISY_TARGET_USES_MIDI_UART
-		midi.init(); 
-		#endif
+			static bool blink;
+			while(1) {
+				uint32_t t1 = dsy_system_getnow();
+				dt = t1-t;
+				t = t1;
 
-		app_selected = 0;
-		appdefs[app_selected].load();
+				// pulse seed LED for status according to CPU usage:
+				hardware.seed.SetLed((t % 1000)/10 <= uint32_t(0.0001f*audioCpuUs*samplerate/blocksize));
+				
+				// handle app-level code (e.g. for CV/gate outs)
+				mainloopCallback(t, dt);
+				
+				if (uitimer.ready(dt)) {
 
-		#ifdef GEN_DAISY_TARGET_HAS_OLED
-		console.display(hardware.display);
-		#endif 
-		while(1) {
-			uint32_t t1 = dsy_system_getnow();
-			dt = t1-t;
-			t = t1;
+					#ifdef OOPSY_TARGET_USES_MIDI_UART
+					midi.mainloop();
+					#endif
 
-			#ifdef GEN_DAISY_TARGET_USES_MIDI_UART
-			midi.mainloop();
-			#endif
-			// handle app-level code (e.g. for LED/CV/gate outs)
-			mainloopCallback(t, dt);
-			
-			if (uitimer.ready(dt)) {
-				// Handle encoder press/longpress actions:
-				if (encoder_held_ms > GEN_DAISY_LONG_PRESS_MS) {
-					// LONG PRESS
-					is_mode_selecting = 1;
-				} 
-		
-				// Handle encoder increment actions:
-				if (is_mode_selecting) {
-					//if (encoder_incr) console.log("mode %d %d %d", encoder_incr, mode, MODE_COUNT);
-					mode += encoder_incr;
-					if (mode >= MODE_COUNT) mode = 1;
-					if (mode < 1) mode = MODE_COUNT-1;	
-				#ifdef GEN_DAISY_MULTI_APP
-				} else if (mode == MODE_MENU) {
-					app_selecting += encoder_incr;
-					if (app_selecting >= app_count) app_selecting -= app_count;
-					if (app_selecting < 0) app_selecting += app_count;
-				#endif
-				#ifdef GEN_DAISY_TARGET_HAS_OLED
-				} else if (mode == MODE_SCOPE) {
-					console.scope_increment(encoder_incr);
-				#endif
-				}
-				encoder_incr = 0;
+					if (menu_button_held_ms > OOPSY_LONG_PRESS_MS) {
+						// LONG PRESS
+						is_mode_selecting = 1;
+					}
+
+					// CLEAR DISPLAY
+					#ifdef OOPSY_TARGET_HAS_OLED
+					hardware.display.Fill(false);
+					#endif
+					#ifdef OOPSY_TARGET_PETAL 
+					hardware.ClearLeds();
+					#endif
+				
+					#ifdef OOPSY_TARGET_PETAL 
+					// has no mode selection
+					is_mode_selecting = 0;
+					#if defined(OOPSY_MULTI_APP)
+					// multi-app is always in menu mode:
+					mode = MODE_MENU;
+					#endif
+					for(int i = 0; i < 8; i++) {
+						float white = (i == app_selecting || menu_button_released);
+						hardware.SetRingLed((daisy::DaisyPetal::RingLed)i, 
+							(i == app_selected || white) * 1.f,
+							white * 1.f,
+							(i < app_count) * 0.3f + white * 1.f
+						);
+					}
+					#endif //OOPSY_TARGET_PETAL
+
+					#ifdef OOPSY_TARGET_VERSIO
+					// has no mode selection
+					is_mode_selecting = 0;
+					#if defined(OOPSY_MULTI_APP)
+					// multi-app is always in menu mode:
+					mode = MODE_MENU;
+					#endif
+					for(int i = 0; i < 4; i++) {
+						float white = (i == app_selecting || menu_button_released);
+						hardware.SetLed(i, 
+							(i == app_selected || white) * 1.f,
+							white * 1.f,
+							(i < app_count) * 0.3f + white * 1.f
+						);
+					}
+					#endif //OOPSY_TARGET_VERSIO
 
-				// SHORT PRESS	
-				if (encoder_released) {
+					// Handle encoder increment actions:
 					if (is_mode_selecting) {
-						is_mode_selecting = 0;
-					#ifdef GEN_DAISY_MULTI_APP
+						mode += menu_button_incr;
+						if (mode >= MODE_COUNT) mode = 0;
+						if (mode < 0) mode = MODE_COUNT-1;	
+					#ifdef OOPSY_MULTI_APP
 					} else if (mode == MODE_MENU) {
-						if (app_selected != app_selecting) {
-							app_selected = app_selecting;
-							appdefs[app_selected].load();
-							mode = mode_default;
+						#ifdef OOPSY_TARGET_VERSIO
+						app_selecting = menu_button_incr;
+						#else
+						app_selecting += menu_button_incr;
+						#endif
+						if (app_selecting >= app_count) app_selecting -= app_count;
+						if (app_selecting < 0) app_selecting += app_count;
+					#endif // OOPSY_MULTI_APP
+					#ifdef OOPSY_TARGET_HAS_OLED
+					} else if (mode == MODE_SCOPE) {
+						switch (scope_option) {
+							case SCOPEOPTION_STYLE: {
+								scope_style = (scope_style + menu_button_incr) % SCOPESTYLE_COUNT;
+							} break;
+							case SCOPEOPTION_SOURCE: {
+								if (menu_button_incr) scope_source = !scope_source;
+							} break;
+							case SCOPEOPTION_ZOOM: {
+								scope_zoom = (scope_zoom + menu_button_incr);
+								if (scope_zoom > OOPSY_SCOPE_MAX_ZOOM) scope_zoom = 1;
+								if (scope_zoom < 1) scope_zoom = OOPSY_SCOPE_MAX_ZOOM;
+							} break;
 						}
-					#endif
+					#endif //OOPSY_TARGET_HAS_OLED
 					}
-				} 
-				encoder_released = 0;
-				
-				// if (encoder_held_ms > GEN_DAISY_LONG_PRESS_MS) {
-				// 	mode = MODE_MENU;
-				// } else if (mode == MODE_MENU) {
-				// 	// just released:
-				// 	mode = mode_default;
-				// 	if (app_selected != app_selecting) {
-				// 		app_selected = app_selecting;
-				// 		console.log("load %s", appdefs[app_selected].name);
-				// 		appdefs[app_selected].load();
-				// 	}
-				// } 
-
-				// switch (mode) {
-				// 	case MODE_MENU: {
-				// 		app_selecting += encoder_incr;
-				// 		if (app_selecting >= app_count) app_selecting -= app_count;
-				// 		if (app_selecting < 0) app_selecting += app_count;
-
-				// 	} break;
-				// 	#ifdef GEN_DAISY_TARGET_HAS_OLED
-				// 	case MODE_SCOPE: scope.increment(encoder_incr); break;
-				// 	#endif
-				// 	default: break;
-				// }
-
-
-				#ifdef GEN_DAISY_TARGET_HAS_OLED
-				hardware.display.Fill(false);
-				#endif
-				switch(mode) {
-					#ifdef GEN_DAISY_TARGET_HAS_OLED
-					#ifdef GEN_DAISY_MULTI_APP
-					case MODE_MENU: {
-						FontDef& font = console.font;
-						for (int i=0; i<8; i++) {
-							if (i == app_selecting) {
-								hardware.display.SetCursor(0, font.FontHeight * i);
-								hardware.display.WriteString((char *)">", font, true);
+					menu_button_incr = 0;
+
+					// SHORT PRESS	
+					if (menu_button_released) {
+						menu_button_released = 0;
+						if (is_mode_selecting) {
+							is_mode_selecting = 0;
+						#ifdef OOPSY_MULTI_APP
+						} else if (mode == MODE_MENU) {
+							if (app_selected != app_selecting) {
+								app_selected = app_selecting;
+								#ifndef OOPSY_TARGET_HAS_OLED
+								mode = mode_default;
+								#endif
+								appdefs[app_selected].load();
+								continue;
+							}
+						#endif
+						#ifdef OOPSY_TARGET_HAS_OLED
+						} else if (mode == MODE_SCOPE) {
+							scope_option = (scope_option + 1) % SCOPEOPTION_COUNT;
+						#endif
+						}
+					} 
+
+					// OLED DISPLAY:
+					#ifdef OOPSY_TARGET_HAS_OLED
+					switch(mode) {
+						#ifdef OOPSY_MULTI_APP
+						case MODE_MENU: {
+							for (int i=0; i<8; i++) {
+								if (i == app_selecting) {
+									hardware.display.SetCursor(0, font.FontHeight * i);
+									hardware.display.WriteString((char *)">", font, i != app_selected);
+								}
+								if (i < app_count) {
+									hardware.display.SetCursor(font.FontWidth, font.FontHeight * i);
+									hardware.display.WriteString((char *)appdefs[i].name, font, i != app_selected);
+								}
 							}
-							if (i < app_count) {
-								hardware.display.SetCursor(font.FontWidth, font.FontHeight * i);
-								hardware.display.WriteString((char *)appdefs[i].name, font, true);
+						} break;
+						#endif //OOPSY_MULTI_APP
+						case MODE_SCOPE: {
+							uint8_t h = SSD1309_HEIGHT;
+							uint8_t w2 = SSD1309_WIDTH/2, w4 = SSD1309_WIDTH/4;
+							uint8_t h2 = h/2, h4 = h/4;
+							size_t samples = scope_samples();
+							hardware.display.Fill(false);
+
+							// stereo views:
+							switch (scope_style) {
+							case SCOPESTYLE_OVERLAY: {
+								// stereo overlay:
+								for (uint_fast8_t i=0; i<SSD1309_WIDTH; i++) {
+									int j = i*2;
+									hardware.display.DrawLine(i, (1.f-scope_data[j][0])*h2, i, (1.f-scope_data[j+1][0])*h2, 1);
+									hardware.display.DrawLine(i, (1.f-scope_data[j][1])*h2, i, (1.f-scope_data[j+1][1])*h2, 1);
+								}
+							} break;
+							case SCOPESTYLE_TOPBOTTOM:
+							{
+								// stereo top-bottom
+								for (uint_fast8_t i=0; i<SSD1309_WIDTH; i++) {
+									int j = i*2;
+									hardware.display.DrawLine(i, (1.f-scope_data[j][0])*h4, i, (1.f-scope_data[j+1][0])*h4, 1);
+									hardware.display.DrawLine(i, (1.f-scope_data[j][1])*h4+h2, i, (1.f-scope_data[j+1][1])*h4+h2, 1);
+								}
+							} break;
+							case SCOPESTYLE_LEFTRIGHT:
+							{
+								// stereo L/R:
+								samples /= 2;
+								for (uint_fast8_t i=0; i<w2; i++) {
+									int j = i*2;
+									hardware.display.DrawLine(i, (1.f-scope_data[j][0])*h2, i, (1.f-scope_data[j+1][0])*h2, 1);
+									hardware.display.DrawLine(i + w2, (1.f-scope_data[j][1])*h2, i + w2, (1.f-scope_data[j+1][1])*h2, 1);
+								}
+							} break;
+							default:
+							{
+								// stereo lissajous:
+								samples /= 2;
+
+								for (uint_fast8_t i=0; i<SSD1309_WIDTH; i++) {
+									int j = i*2;
+									hardware.display.DrawLine(
+										w2 + h2*scope_data[j][0],
+										h2 + h2*scope_data[j][1],
+										w2 + h2*scope_data[j+1][0],
+										h2 + h2*scope_data[j+1][1],
+										1
+									);
+								}
+							} break;
+							} // switch
+
+							// labelling:
+							switch (scope_option) {
+								case SCOPEOPTION_SOURCE: {
+									hardware.display.SetCursor(0, h - font.FontHeight);
+									hardware.display.WriteString(scope_source ? "in1 in2" : "out1 out2", font, true);
+								} break;
+								case SCOPEOPTION_ZOOM: {
+									// each pixel is zoom samples; zoom/samplerate seconds
+									float scope_duration = SSD1309_WIDTH*(1000.f*samples/samplerate);
+									int offset = snprintf(scope_label, console_cols, "%dx %dms", samples, (int)ceilf(scope_duration));
+									hardware.display.SetCursor(0, h - font.FontHeight);
+									hardware.display.WriteString(scope_label, font, true);
+								} break;
+								// for view style, just leave it blank :-)
 							}
+						} break;
+						case MODE_CONSOLE: 
+						{
+							console_display(); 
+							break;
+						}
+						default: {
 						}
-					} break;
-					#endif //GEN_DAISY_MULTI_APP
-					case MODE_SCOPE: console.scope_display(hardware.display, samplerate); break;
-					case MODE_CONSOLE: 
-					{
-						console.display(hardware.display); 
-						break;
 					}
-					
-					#else  //GEN_DAISY_TARGET_HAS_OLED
-					case MODE_MENU: {
-						// TODO show menu selection via LEDs
-					} break;
-					#endif //GEN_DAISY_TARGET_HAS_OLED
-					default: {
+					if (is_mode_selecting) {
+						hardware.display.DrawRect(0, 0, SSD1309_WIDTH-1, SSD1309_HEIGHT-1, 1);
+					} 
+					if (mode != MODE_NONE) {
+						int offset = 0;
+						#ifdef OOPSY_TARGET_USES_MIDI_UART
+						offset += snprintf(console_stats+offset, console_cols-offset, "%c%c", midi.in_active ? '<' : ' ', midi.out_active ? '>' : ' ');
+						midi.in_active = midi.out_active = 0;
+						#endif
+						offset += snprintf(console_stats+offset, console_cols-offset, "%02d%%", int(0.0001f*audioCpuUs*(samplerate)/blocksize));
+						// stats:
+						hardware.display.SetCursor(SSD1309_WIDTH - (offset) * font.FontWidth, font.FontHeight * 0);
+						hardware.display.WriteString(console_stats, font, true);
 					}
-				}
+					#endif //OOPSY_TARGET_HAS_OLED
+					
+					// handle app-level code (e.g. for LED etc.)
+					displayCallback(t, dt);
 
-				if (is_mode_selecting) {
-					#ifdef GEN_DAISY_TARGET_HAS_OLED
-					hardware.display.DrawRect(0, 0, SSD1309_WIDTH-1, SSD1309_HEIGHT-1, 1);
-					#endif
-				} 
-				#ifdef GEN_DAISY_TARGET_HAS_OLED
-				#ifdef GEN_DAISY_MULTI_APP
-				if (mode != MODE_MENU) 
-				#endif //GEN_DAISY_MULTI_APP
-				{
-					// status bar
-					int offset = 0;
-					offset += snprintf(console.console_stats+offset, console.console_cols-offset, "%02d%%", int(0.0001f*audioCpuUs*(samplerate)/blocksize));
-					#ifdef GEN_DAISY_TARGET_USES_MIDI_UART
-					offset += snprintf(console.console_stats+offset, console.console_cols-offset, " %cM%c", midi.in_active ? '<' : ' ', midi.out_active ? '>' : ' ');
-					midi.in_active = midi.out_active = 0;
-					#endif
-					console.status_display(hardware.display);
-				}
-				hardware.display.Update();
-				#endif //GEN_DAISY_TARGET_HAS_OLED
-			} // uitimer.ready
+					#ifdef OOPSY_TARGET_HAS_OLED
+					hardware.display.Update();
+					#endif //OOPSY_TARGET_HAS_OLED
+					#if (OOPSY_TARGET_PETAL || OOPSY_TARGET_VERSIO)
+					hardware.UpdateLeds();
+					#endif //(OOPSY_TARGET_PETAL || OOPSY_TARGET_VERSIO)
+
+				} // uitimer.ready
+			}
+			return 0;
 		}
-		return 0;
-	}
 
-	void audio_preperform(size_t size) {
+		void audio_preperform(size_t size) {
+			#ifdef OOPSY_TARGET_USES_MIDI_UART
+			midi.preperform(size);
+			#endif
 
-		#ifdef GEN_DAISY_TARGET_USES_MIDI_UART
-		midi.preperform(size);
-		#endif
+			#if (OOPSY_TARGET_FIELD || OOPSY_TARGET_VERSIO)
+				hardware.ProcessAnalogControls();
+				#if OOPSY_TARGET_FIELD
+				hardware.UpdateDigitalControls();
+				#endif
+			#else
+				hardware.DebounceControls();
+				hardware.UpdateAnalogControls();
+			#endif
 
-		#if (GEN_DAISY_TARGET_FIELD)
-		hardware.ProcessAnalogControls();
-		hardware.UpdateDigitalControls();
-		#else
-		hardware.DebounceControls();
-		hardware.UpdateAnalogControls();
-		#endif
+			#ifdef OOPSY_TARGET_FIELD
+			menu_button_held = hardware.GetSwitch(0)->Pressed();
+			menu_button_incr += hardware.GetSwitch(1)->FallingEdge();
+			menu_button_held_ms = hardware.GetSwitch(0)->TimeHeldMs();
+			if (hardware.GetSwitch(0)->FallingEdge()) menu_button_released = 1;
+			#elif OOPSY_TARGET_VERSIO
+			// menu_button_held = hardware.tap_.Pressed();
+			// menu_button_incr += hardware.GetKnobValue(6) * app_count;
+			// menu_button_held_ms = hardware.tap_.TimeHeldMs();
+			// if (hardware.tap_.FallingEdge()) menu_button_released = 1;
+			#else
+			menu_button_held = hardware.encoder.Pressed();
+			menu_button_incr += hardware.encoder.Increment();
+			menu_button_held_ms = hardware.encoder.TimeHeldMs();
+			if (hardware.encoder.FallingEdge()) menu_button_released = 1;
+			#endif
+		}
 
-		#ifdef GEN_DAISY_TARGET_FIELD
-		encoder_held = hardware.GetSwitch(0)->Pressed();
-		encoder_incr += hardware.GetSwitch(1)->FallingEdge();
-		encoder_held_ms = hardware.GetSwitch(0)->TimeHeldMs();
-		if (hardware.GetSwitch(0)->FallingEdge()) encoder_released = 1;
-		#else
-		encoder_held = hardware.encoder.Pressed();
-		encoder_incr += hardware.encoder.Increment();
-		encoder_held_ms = hardware.encoder.TimeHeldMs();
-		if (hardware.encoder.FallingEdge()) encoder_released = 1;
-		#endif
+		void audio_postperform(float **hardware_ins, float **hardware_outs, size_t size) {
+			#ifdef OOPSY_TARGET_HAS_OLED
+			if (mode == MODE_SCOPE) {
+				// TODO: add selector for scope storage source:
+				float * buf0 = scope_source ? hardware_ins[0] : hardware_outs[0];
+				float * buf1 = scope_source ? hardware_ins[1] : hardware_outs[1];
+				size_t samples = scope_samples();
+				for (size_t i=0; i<size/samples; i++) {
+					float min0 = 10.f, max0 = -10.f;
+					float min1 = 10.f, max1 = -10.f;
+					for (size_t j=0; j<samples; j++) {
+						float pt0 = *buf0++;
+						float pt1 = *buf1++;
+						min0 = min0 > pt0 ? pt0 : min0;
+						max0 = max0 < pt0 ? pt0 : max0;
+						min1 = min1 > pt1 ? pt1 : min1;
+						max1 = max1 < pt1 ? pt1 : max1;
+					}
+					scope_data[scope_step][0] = (min0);
+					scope_data[scope_step][1] = (min1);
+					scope_step++;
+					scope_data[scope_step][0] = (max0); 
+					scope_data[scope_step][1] = (max1);
+					scope_step++;
+					if (scope_step >= SSD1309_WIDTH*2) scope_step = 0;
+				}
+			}
+			#endif
+			#if (OOPSY_TARGET_POD)
+				hardware.UpdateLeds();
+			#endif
+		}
 
-	}
+		#ifdef OOPSY_TARGET_HAS_OLED
+		inline int scope_samples() {
+			// valid zoom sizes: 1, 2, 3, 4, 6, 8, 12, 16, 24
+			switch(scope_zoom) {
+				case 1: case 2: case 3: case 4: return scope_zoom; break;
+				case 5: return 6; break;
+				case 6: return 8; break;
+				case 7: return 12; break;
+				case 8: return 16; break;
+				default: return 24; break;
+			}
+		}
 
-	void audio_postperform(float **hardware_ins, float **hardware_outs, size_t size) {
-		#ifdef GEN_DAISY_TARGET_HAS_OLED
-		if (mode == MODE_SCOPE) {
-			//scope.store(hardware_ins, size, samplerate);
-			console.scope_store(hardware_outs[0], size, samplerate);
+		GenDaisy& console_display() {
+			for (int i=0; i<console_rows; i++) {
+				hardware.display.SetCursor(0, font.FontHeight * i);
+				hardware.display.WriteString(console_lines[(i+console_line) % console_rows], font, true);
+			}
+			return *this;
+		}
+		#endif // OOPSY_TARGET_HAS_OLED
+
+		GenDaisy& log(const char * fmt, ...) {
+			#ifdef OOPSY_TARGET_HAS_OLED
+			va_list argptr;
+			va_start(argptr, fmt);
+			vsnprintf(console_lines[console_line], console_cols, fmt, argptr);
+			va_end(argptr);
+			console_line = (console_line + 1) % console_rows;
+			#endif
+			return *this;
 		}
+
+		#if (OOPSY_TARGET_FIELD)
+		void setFieldLedsFromData(Data& data) {
+			for(long i = 0; i < daisy::DaisyField::LED_LAST && i < data.dim; i++) {
+				// LED indices run A1..8, B8..1, Knob1..8
+				// switch here to re-order the B8-1 to B1-8
+				long idx=i;
+				if (idx > 7 && idx < 16) idx = 23-i;
+				hardware.led_driver_.SetLed(idx, data.mData[i]);
+			}
+			hardware.led_driver_.SwapBuffersAndTransmit();
+		};
 		#endif
+
+		static void nullAudioCallback(float **hardware_ins, float **hardware_outs, size_t size);
+		
+		static void nullMainloopCallback(uint32_t t, uint32_t dt) {}
+	} daisy;
+
+	void GenDaisy::nullAudioCallback(float **hardware_ins, float **hardware_outs, size_t size) {
+		daisy.nullAudioCallbackRunning = true;
+		// zero audio outs:
+		for (int i=0; i<OOPSY_IO_COUNT; i++) {
+			memset(hardware_outs[i], 0, sizeof(float)*size);
+		}
 	}
 
-	static void nullAudioCallback(float **hardware_ins, float **hardware_outs, size_t size);
-	
-	static void nullMainloopCallback(uint32_t t, uint32_t dt) {}
-} gendaisy;
 
-void GenDaisy::nullAudioCallback(float **hardware_ins, float **hardware_outs, size_t size) {
-	gendaisy.nullAudioCallbackRunning = true;
-}
+	// Curiously-recurring template to make App definitions simpler:
+	template<typename T>
+	struct App {
+		
+		static void staticMainloopCallback(uint32_t t, uint32_t dt) {
+			T& self = *(T *)daisy.app;
+			self.mainloopCallback(daisy, t, dt);
+		}
 
-// Curiously-recurring template to make App definitions simpler:
-template<typename T>
-struct StaticApp {
-	
-	static void staticMainloopCallback(uint32_t t, uint32_t dt) {
-		T& self = *(T *)gendaisy.app;
-		self.mainloopCallback(gendaisy, t, dt);
-	}
+		static void staticDisplayCallback(uint32_t t, uint32_t dt) {
+			T& self = *(T *)daisy.app;
+			self.displayCallback(daisy, t, dt);
+		}
 
-	static void staticAudioCallback(float **hardware_ins, float **hardware_outs, size_t size) {
-		uint32_t start = dsy_tim_get_tick(); // 200MHz
-		gendaisy.audio_preperform(size);
-		((T *)gendaisy.app)->audioCallback(gendaisy, hardware_ins, hardware_outs, size);
-		gendaisy.audio_postperform(hardware_ins, hardware_outs, size);
-		// convert elapsed time (200Mhz ticks) to CPU percentage:
-		gendaisy.audioCpuUs = (dsy_tim_get_tick() - start) / 200;
-	}
-};
+		static void staticAudioCallback(float **hardware_ins, float **hardware_outs, size_t size) {
+			uint32_t start = dsy_tim_get_tick(); // 200MHz
+			daisy.audio_preperform(size);
+			((T *)daisy.app)->audioCallback(daisy, hardware_ins, hardware_outs, size);
+			daisy.audio_postperform(hardware_ins, hardware_outs, size);
+			// convert elapsed time (200Mhz ticks) to CPU percentage:
+			daisy.audioCpuUs = (dsy_tim_get_tick() - start) / 200;
+		}
+	};
 
-////////////////////////// BINDING DAISY TO GENLIB //////////////////////////
+}; // oopsy::
+
+void genlib_report_error(const char *s) { oopsy::daisy.log(s); }
+void genlib_report_message(const char *s) { oopsy::daisy.log(s); }
 
-void genlib_report_error(const char *s) { gendaisy.console.log(s); }
-void genlib_report_message(const char *s) { gendaisy.console.log(s); }
 unsigned long genlib_ticks() { return dsy_system_getnow(); }
 
 t_ptr genlib_sysmem_newptr(t_ptr_size size) {
-	return (t_ptr)gendaisylib::allocate(size);
+	return (t_ptr)oopsy::allocate(size);
 }
 
 t_ptr genlib_sysmem_newptrclear(t_ptr_size size) {
 	t_ptr p = genlib_sysmem_newptr(size);
-	if (p) gendaisylib::memset(p, 0, size);
+	if (p) oopsy::memset(p, 0, size);
 	return p;
 }
 
+
 #endif //GENLIB_DAISY_H
diff --git a/source/libdaisy b/source/libdaisy
index d6214ef..a2f2c78 160000
--- a/source/libdaisy
+++ b/source/libdaisy
@@ -1 +1 @@
-Subproject commit d6214ef2bd9ebfd9f40dbe3645c9beb8baaba001
+Subproject commit a2f2c780f6ce52d124d1b1286cc52507326390d6
diff --git a/source/oopsy.js b/source/oopsy.js
index 8f4b26f..e973348 100755
--- a/source/oopsy.js
+++ b/source/oopsy.js
@@ -19,6 +19,19 @@ function interpolate(str, data) {
 	return str.replace(/\$<([^>]+)>/gm, (s, key) => data[key])
 }
 
+// prints a number as a C-style float:
+function toCfloat(n) {
+	let s = (+n).toString();
+	// add point if needed:
+	if (s.includes("e")) {
+		return s;
+	} else if (s.includes(".")) {
+		return s + "f";
+	} else {
+		return s + ".f";
+	}
+}
+
 const help = `
 <[cmds]> <[target]> <[cpps]> <watch>
 
@@ -69,24 +82,43 @@ function run() {
 			case "pod":
 			case "field":
 			case "petal":
-			case "patch": {target = arg;} break;
+			case "patch": 
+			case "versio": {target = arg;} break;
 			case "watch": watch=true; break;
+
 			default: {
-				let p = path.parse(arg);
-				switch(p.ext) {
-					case ".json": {target_path = arg; target = ""}; break;
-					case ".cpp": cpps.push(arg); break;
-					// case ".gendsp":
-					// case ".maxpat":
-					// case ".maxhelp": {pat_path = arg}; break;
-					default: {
-						console.warn("unexpected input", arg);
+
+				if (fs.existsSync(arg)) {
+					if (fs.lstatSync(arg).isDirectory()) {
+						// add a whole folder full of cpps:
+						cpps = cpps.concat(fs.readdirSync(arg)
+							.filter(s => path.parse(s).ext == ".cpp") 
+							.map(s => path.join(arg, s))
+						)
+					} else {	
+						let p = path.parse(arg);
+						switch(p.ext) {
+							case ".json": {target_path = arg; target = ""}; break;
+							case ".cpp": cpps.push(arg); break;
+							// case ".gendsp":
+							// case ".maxpat":
+							// case ".maxhelp": {pat_path = arg}; break;
+							default: {
+								console.warn("unexpected input", arg);
+							}
+						}
 					}
 				}
 			}
 		}
 	});
 
+	// remove duplicates:
+	cpps = cpps.reduce(function (acc, s) {
+		if (acc.indexOf(s) === -1) acc.push(s)
+		return acc
+	}, []);
+
 	// configure target:
 	if (!target && !target_path) target = "patch";
 	if (!target_path) {
@@ -97,25 +129,21 @@ function run() {
 	console.log(`Target ${target} configured in path ${target_path}`)
 	assert(fs.existsSync(target_path), `couldn't find target configuration file ${target_path}`);
 	const hardware = JSON.parse(fs.readFileSync(target_path, "utf8"));
-	if (!hardware.keys) hardware.keys = []
-	if (!hardware.knobs) hardware.knobs = []
-	if (!hardware.switches) hardware.switches = []
 
 	// verify and analyze cpps:
 	assert(cpps.length > 0, "an argument specifying the path to at least one gen~ exported cpp file is required");
-	if (cpps.length > 8) {
-		console.log("maximum 8 apps supported currently")
-		cpps.length = 8;
+	if (hardware.max_apps && cpps.length > hardware.max_apps) {
+		console.log(`this target does not support more than ${hardwre.max_apps} apps`)
+		cpps.length = hardware.max_apps
 	}
-	let gloos = cpps.map(cpp_path => {
+	let apps = cpps.map(cpp_path => {
 		assert(fs.existsSync(cpp_path), `couldn't find source C++ file ${cpp_path}`);
-		let gloo = analyze_cpp(fs.readFileSync(cpp_path, "utf8"));
-		gloo.hardware = hardware;
-		gloo.target = target;
-		gloo.path = cpp_path;
-		return gloo;
+		return {
+			path: cpp_path,
+			patch: analyze_cpp(fs.readFileSync(cpp_path, "utf8"))
+		}
 	})
-	let build_name = gloos.map(v=>v.name).join("_")
+	let build_name = apps.map(v=>v.patch.name).join("_")
 
 	// configure build path:
 	const build_path = path.join(__dirname, `build_${build_name}_${target}`)
@@ -123,6 +151,13 @@ function run() {
 	// ensure build path exists:
 	fs.mkdirSync(build_path, {recursive: true});
 
+	let config = {
+		build_name: build_name,
+		build_path: build_path,
+		target: target,
+		hardware: hardware,
+		apps: apps,
+	}
 	
 	// add watcher
 	if (watch && watchers.length < 1) {
@@ -131,7 +166,6 @@ function run() {
 		}))
 	}
 
-
 	const makefile_path = path.join(build_path, `Makefile`)
 	const bin_path = path.join(build_path, "build", build_name+".bin");
 	const maincpp_path = path.join(build_path, `${build_name}_${target}.cpp`);
@@ -142,91 +176,106 @@ TARGET = ${build_name}
 CPP_SOURCES = ${posixify_path(path.relative(build_path, maincpp_path).replace(" ", "\\ "))}
 # Library Locations
 LIBDAISY_DIR = ${(posixify_path(path.relative(build_path, path.join(__dirname, "libdaisy"))).replace(" ", "\\ "))}
+# Optimize (i.e. CFLAGS += -O3):
+OPT = -O3
 # Core location, and generic Makefile.
 SYSTEM_FILES_DIR = $(LIBDAISY_DIR)/core
 include $(SYSTEM_FILES_DIR)/Makefile
 # Include the gen_dsp files
 CFLAGS+=-I"${posixify_path(path.relative(build_path, path.join(__dirname, "gen_dsp")))}"
-CFLAGS+=-Wno-unused-but-set-variable -Wno-unused-parameter -Wno-unused-variable
-# Enable printing of floats (for OLED display)
-LDFLAGS+=-u _printf_float
+# Silence irritating warnings:
+CFLAGS+=-O3 -Wno-unused-but-set-variable -Wno-unused-parameter -Wno-unused-variable
+CPPFLAGS+=-O3 -Wno-unused-but-set-variable -Wno-unused-parameter -Wno-unused-variable
 `, "utf-8");
+
+	// didn't seem to be working:
+	//# Enable printing of floats (for OLED display)
+	//LDFLAGS+=-u _printf_float
 	console.log(`Will ${action} from ${cpps.join(", ")} by writing to:`)
 	console.log(`\t${maincpp_path}`)
 	console.log(`\t${makefile_path}`)
 	console.log(`\t${bin_path}`)
 
-	gloos.map(gloo => {
-		gloo.relative_path = path.relative(build_path, gloo.path);
-		generate_gloo(gloo);
-		return gloo;
+	apps.map(app => {
+		generate_app(app, hardware, target);
+		return app;
 	})
 
-	// store for debugging:
-	fs.writeFileSync(path.join(build_path, `${build_name}_${target}.json`), JSON.stringify(gloos,null,"  "),"utf8");
+	let defines = Object.assign({}, hardware.defines);
+	if (apps.some(g => (g.has_midi_in && hardware.midi_ins.length) || (g.has_midi_out && hardware.midi_outs.length))) {
+		defines.OOPSY_TARGET_USES_MIDI_UART = 1
+	}
+	if (apps.length > 1) defines.OOPSY_MULTI_APP = 1
+	if (hardware.oled) defines.OOPSY_TARGET_HAS_OLED = 1
 
-	const cppcode = `${
-target=="patch" ? "#define GEN_DAISY_TARGET_PATCH 1" :
-target=="field" ? "#define GEN_DAISY_TARGET_FIELD 1" : 
-target=="petal" ? "#define GEN_DAISY_TARGET_PETAL 1" :
-target=="pod" ? "#define GEN_DAISY_TARGET_POD 1" :
-""}
-${gloos.some(g => g.has_midi_in || g.has_midi_out) ? "#define GEN_DAISY_TARGET_USES_MIDI_UART 1" : "// no midi"}
-${(gloos.length > 1) ? "#define GEN_DAISY_MULTI_APP 1" : "// single app"}
+	// store for debugging:
+	//fs.writeFileSync(path.join(build_path, `${build_name}_${target}.json`), JSON.stringify(config,null,"  "),"utf8");
 
+	const cppcode = `${Object.keys(defines).map(k => `
+#define ${k} (${defines[k]})`).join("")}
 #include "../genlib_daisy.h"
 #include "../genlib_daisy.cpp"
-${gloos.map(gloo => `#include "${posixify_path(gloo.relative_path)}"`).join("\n")}
-${gloos.map(gloo => gloo.cpp.struct).join("\n")}
+${apps.map(app => `#include "${posixify_path(path.relative(build_path, app.path))}"`).join("\n")}
+${apps.map(app => app.cpp.struct).join("\n")}
 
 // store apps in a union to re-use memory, since only one app is active at once:
 union {
-	${gloos.map(gloo => gloo.cpp.union).join("\n\t")}
+	${apps.map(app => app.cpp.union).join("\n\t")}
 } apps;
 
-GenDaisy::AppDef appdefs[] = {
-	${gloos.map(gloo => gloo.cpp.appdef).join("\n\t")}
+oopsy::AppDef appdefs[] = {
+	${apps.map(app => app.cpp.appdef).join("\n\t")}
 };
 
 int main(void) {
-	return gendaisy.run(appdefs, sizeof(appdefs)/sizeof(GenDaisy::AppDef));
+	return oopsy::daisy.run(appdefs, ${apps.length});
 }
 `
 	fs.writeFileSync(maincpp_path, cppcode, "utf-8");	
 
+	console.log("oopsy generated code")
+
 	// now try to make:
 	try {
+		try {
+			console.log(execSync("make clean", { cwd: build_path }).toString())
+			if (os.platform() == "win32") {
+				// Gather up make output to run command per line as child process
+				let build_cmd = execSync("make -n", { cwd: build_path }).toString().split(os.EOL)
+				build_cmd.forEach(line => {
+					// Silently execute the commands line-by-line.
+					if (line.length > 0)
+						execSync(line, { cwd: build_path }).toString()
+				})
+			} else {
+				console.log(execSync("export PATH=$PATH:/usr/local/bin && make", { cwd: build_path }).toString())
+			}
 
-		console.log(execSync("make clean", { cwd: build_path }).toString())
-		// TODO: make this cross-platform:
-		if (os.platform() == "win32") {
-			//console.log(execSync("set PATH=%PATH%;/usr/local/bin && make", { cwd: build_path }).toString())
-
-			// Gather up make output to run command per line as child process
-			// TODO: fix the awful output..
-			let build_cmd = execSync("make -n", { cwd: build_path }).toString().split(os.EOL)
-			build_cmd.forEach(line => {
-				if (line.length > 0)
-					console.log(execSync(line, { cwd: build_path }).toString())
-			})
-		
-		} else {
-			console.log(execSync("export PATH=$PATH:/usr/local/bin && make", { cwd: build_path }).toString())
+			console.log("oopsy compiled code")
+		} catch (e) {
+			// errors from make here
+			console.error("make failed");
 		}
 		// if successful, try to upload to hardware:
 		if (fs.existsSync(bin_path) && action=="upload") {
-			console.log("uploading", bin_path)
+			
+			console.log("oopsy flashing...")
+			
 			if (os.platform() == "win32") {
 				console.log(execSync("set PATH=%PATH%;/usr/local/bin && make program-dfu", { cwd: build_path }).toString())
 			} else {
 				console.log(execSync("export PATH=$PATH:/usr/local/bin && make program-dfu", { cwd: build_path, stdio:'inherit' }).toString())
+				//console.log(execSync("export PATH=$PATH:/usr/local/bin && make program-dfu", { cwd: build_path }).toString())
+				//console.log(execSync("export PATH=$PATH:/usr/local/bin && make program-dfu", { cwd: build_path, stdio:'inherit' })
 			}
+
+			console.log("oopsy flashed")
 		}
 	} catch (e) {
 		// errors from make here
-		console.error("make failed");
+		console.log("upload failed");
 	}
-	console.log("done")
+	console.log("oopsy done")
 }
 
 function analyze_cpp(cpp) {
@@ -261,10 +310,11 @@ function analyze_cpp(cpp) {
 }
 
 function generate_daisy(hardware, nodes, target) {
-	return {
+	let daisy = {
 		audio_ins: hardware.audio_ins.map((v, i)=>{
 			let name = `dsy_in${i+1}`
 			nodes[name] = {
+				name: name,
 				// name: name,
 				// kind: "input_buffer",
 				// index: i,
@@ -275,6 +325,7 @@ function generate_daisy(hardware, nodes, target) {
 		audio_outs: hardware.audio_outs.map((v, i)=>{
 			let name = `dsy_out${i+1}`
 			nodes[name] = {
+				name: name,
 				// name: name,
 				// kind: "output_buffer",
 				// index: i,
@@ -286,6 +337,7 @@ function generate_daisy(hardware, nodes, target) {
 		midi_ins: hardware.midi_ins.map((v, i)=>{
 			let name = `dsy_midi_in${i+1}`
 			nodes[name] = {
+				name: name,
 				// buffername: name,
 				// index: i,
 				to: [],
@@ -295,6 +347,7 @@ function generate_daisy(hardware, nodes, target) {
 		midi_outs: hardware.midi_outs.map((v, i)=>{
 			let name = `dsy_midi_out${i+1}`
 			nodes[name] = {
+				name: name,
 				// buffername: name,
 				// index: i,
 				from: [],
@@ -302,98 +355,56 @@ function generate_daisy(hardware, nodes, target) {
 			return name;
 		}),
 
-		keys: hardware.keys.map((v, i)=>{
-			let name = `dsy_key_in${i+1}`
-			nodes[name] = {
-				// buffername: name,
-				// index: i,
-				to: [],
-				get: `(hardware.KeyboardState(${i})?1.f:0.f)`,
-			}
-			return name;
-		}),
-		switches: hardware.switches.map((v, i)=>{
-			let name = `dsy_sw_in${i+1}`
-			nodes[name] = {
-				// buffername: name,
-				// index: i,
-				to: [],
-				get: (target=="pod") ? `(hardware.button${i+1}.Pressed()?1.f:0.f)` : (target=="petal") ? `(hardware.switches[${i}].Pressed()?1.f:0.f)` : `(hardware.GetSwitch(${i})->Pressed()?1.f:0.f)`,
-			}
-			return name;
-		}),
-		knobs: hardware.knobs.map((v, i)=>{
-			let name = `dsy_knob_in${i+1}`
+		// DEVICE INPUTS:
+		device_inputs: Object.keys(hardware.inputs).map(v => {
+			let name = v
 			nodes[name] = {
-				// buffername: name,
-				// index: i,
+				name: name,
 				to: [],
-				get: `hardware.GetKnobValue(hardware.KNOB_${i+1})`,
+				get: hardware.inputs[v],
 			}
 			return name;
 		}),
-		cv_ins: hardware.cv_ins.map((v, i)=>{
-			let name = `dsy_cv_in${i+1}`
+
+		// DEVICE OUTPUTS:
+		mainhandlers: Object.keys(hardware.mainhandlers).map(name => {
 			nodes[name] = {
-				// buffername: name,
-				// index: i,
-				to: [],
-				get: (target == "field") ? `hardware.GetCvValue(${i})` : `hardware.GetCtrlValue(hardware.CTRL_${i+1})`,
+				name: name,
+				setter: hardware.mainhandlers[name],
+				data: null,
 			}
 			return name;
 		}),
-		cv_outs: hardware.cv_outs.map((v, i)=>{
-			let name = `dsy_cv_out${i+1}`
+
+		// DEVICE OUTPUTS:
+		device_outs: Object.keys(hardware.outputs).map(name => {
 			nodes[name] = {
-				// buffername: name,
-				// index: i,
+				name: name,
+				config: hardware.outputs[name],
 				from: [],
-				set: `dsy_dac_write(DSY_DAC_CHN${i+1}, ${name} * 4095);`
 			}
 			return name;
 		}),
-		gate_ins: hardware.gate_ins.map((v, i)=>{
-			let name = `dsy_gate_in${i+1}`
-			nodes[name] = {
-				// buffername: name,
-				// index: i,
-				to: [],
-				get: (target == "field") ? `(hardware.gate_in_.State()?1.f:0.f)` : `(hardware.gate_input[hardware.GATE_IN_${i+1}].State()?1.f:0.f)`
-			}
-			return name;
-		}),
-		gate_outs: hardware.gate_outs.map((v, i)=>{
-			let name = `dsy_gate_out${i+1}`
-			nodes[name] = {
-				// buffername: name,
-				// index: i,
-				from: [],
-				set: (target == "field") ? `dsy_gpio_write(&hardware.gate_out_, ${name} > 0.f);` : `dsy_gpio_write(&hardware.gate_output, ${name} > 0.f);`
-			}
-			return name;
-		})	
 	}
+	return daisy
 }
 
-function generate_gloo(gloo) {
-	const {hardware, target} = gloo;
-
+function generate_app(app, hardware, target) {
 	const nodes = {}
 	const daisy = generate_daisy(hardware, nodes, target);
 	const gen = {}
+	const name = app.patch.name;
 
-	gloo.audio_outs = []
-	gloo.has_midi_in = false
-	gloo.has_midi_out = false
-
-	gloo.nodes = nodes;
-	gloo.daisy = daisy;
-	gloo.gen = gen;
-	gloo.nodes = nodes;
+	app.audio_outs = []
+	app.has_midi_in = false
+	app.has_midi_out = false
 
+	app.nodes = nodes;
+	app.daisy = daisy;
+	app.gen = gen;
+	app.nodes = nodes;
 
-	
-	gen.audio_ins = gloo.ins.map((s, i)=>{
+	gen.audio_ins = app.patch.ins.map((s, i)=>{
 		let name = "gen_in"+(i+1)
 		let label = s.replace(/"/g, "").trim();
 		let src = null;
@@ -401,7 +412,7 @@ function generate_gloo(gloo) {
 		if (label == "midi") {
 			if (daisy.midi_ins.length) {
 				src = daisy.midi_ins[0]
-				gloo.has_midi_in = true;
+				app.has_midi_in = true;
 			}
 		} else if (daisy.audio_ins.length > 0) {
 			src = daisy.audio_ins[i % daisy.audio_ins.length];
@@ -418,7 +429,7 @@ function generate_gloo(gloo) {
 		return name;
 	})
 
-	gen.audio_outs = gloo.outs.map((s, i)=>{
+	gen.audio_outs = app.patch.outs.map((s, i)=>{
 		let name = "gen_out"+(i+1)
 		let label = s.replace(/"/g, "").trim();
 		let src = daisy.audio_outs[i];
@@ -432,7 +443,7 @@ function generate_gloo(gloo) {
 				//label: s,
 				to: [],
 			}
-			gloo.audio_outs.push(src);
+			app.audio_outs.push(src);
 		}
 		nodes[name] = {
 			// name: name,
@@ -442,24 +453,24 @@ function generate_gloo(gloo) {
 		}
 
 		// figure out if the out buffer maps to anything:
+
+		// search for a matching [out] name / prefix:
 		let map
-		let match
+		let maplabel
+		Object.keys(hardware.labels.outs).sort().forEach(k => {
+			let match
+			if (match = new RegExp(`^${k}_?(.+)?`).exec(label)) {
+				map = hardware.labels.outs[k];
+				maplabel = match[1] || label
+			}
+		})
 		if (label == "midi") {
 			map = daisy.midi_outs[0]
-			gloo.has_midi_out = true;
-		} else 
-		// cv/ctrl[n]
-		if (match = label.match(/^(cv|ctrl)(\d*)$/)) {
-			map = daisy.cv_outs[(match[2] || 1) - 1]
-			label = match[3] || label
-		} else 
-		// gate[n]
-		if (match = label.match(/^(gate)(\d*)$/)) {
-			map = daisy.gate_outs[(match[2] || 1) - 1]
-			label = match[3] || label
-		} else 
-		// else it is audio data
-		{			
+			app.has_midi_out = true;
+		} else if (map) {
+			label = maplabel
+		} else {
+			// else it is audio data			
 			nodes[src].src = src;
 		}
 		nodes[name].label = label
@@ -471,49 +482,56 @@ function generate_gloo(gloo) {
 		return name;
 	})
 
-	gen.params = gloo.params.map((param, i)=>{
+	gen.params = app.patch.params.map((param, i)=>{
 		const varname = "gen_param_"+param.name;
-
-		let src;
-		let label;
-		let match;
-		if (match = param.name.match(/^(cv|ctrl)(\d*)_?(.+)?/)) {
-			src = daisy.cv_ins[(match[2] || 1) - 1]
-			label = match[3] || param.name
-		}
-		else if (match = param.name.match(/^(gate)(\d*)_?(.+)?/)) {
-			src = daisy.gate_ins[(match[2] || 1) - 1]
-			label = match[3] || param.name
-		} 
-		else if (match = param.name.match(/^(knob)(\d*)_?(.+)?/)) {
-			src = daisy.knobs[(match[2] || 1) - 1]
-			label = match[3] || param.name
-		}
-		else if (match = param.name.match(/^(key)(\d*)_?(.+)?/)) {
-			src = daisy.keys[(match[2] || 1) - 1]
-			label = match[3] || param.name
-		}
-
+		let src, label;
+
+		// search for a matching [out] name / prefix:
+		Object.keys(hardware.labels.params).sort().forEach(k => {
+			let match
+			if (match = new RegExp(`^${k}_?(.+)?`).exec(param.name)) {
+				src = hardware.labels.params[k];
+				label = match[1] || param.name
+			}
+		})
+		
 		let node = Object.assign({
 			varname: varname,
-			label: label,
+			label: label || param.name,
 			src: src,
 		}, param);
-		
 		nodes[varname] = node;
+
 		if (src) {
 			nodes[src].to.push(varname)
 		}
 		return varname;
 	})
 
-	gen.datas = gloo.datas.map((param, i)=>{
+	gen.datas = app.patch.datas.map((param, i)=>{
 		const varname = "gen_data_"+param.name;
+		let src, label;
+		// search for a matching [out] name / prefix:
+		Object.keys(hardware.labels.datas).sort().forEach(k => {
+			let match
+			if (match = new RegExp(`^${k}_?(.+)?`).exec(param.name)) {
+				src = hardware.labels.datas[k];
+				label = match[1] || param.name
+			}
+		})
+
 		let node = Object.assign({
 			varname: varname,
 			label: param.name,
 		}, param);
 		nodes[varname] = node;
+
+		if (src) {
+			nodes[src].data = "gen." + param.cname;
+			//nodes[src].to.push(varname)
+			//nodes[src].from.push(src);
+		}
+
 		return varname;
 	})
 
@@ -521,23 +539,14 @@ function generate_gloo(gloo) {
 	// map unused cvs/knobs to unmapped params
 	let upi=0; // unused param index
 	let param = gen.params[upi];
-	daisy.knobs.forEach((name, i)=>{
-		const node = nodes[name];
-		if (node.to.length == 0) {
-			// find next param without a src:
-			while (param && !!nodes[param].src) param = gen.params[++upi];
-			if (param) {
-				nodes[param].src = name;
-				node.to.push(param);
-			}
-		}
-	})
-	daisy.cv_ins.forEach((name, i)=>{
+	Object.keys(hardware.inputs).forEach(name => {
 		const node = nodes[name];
 		if (node.to.length == 0) {
+			//console.log(name, "not mapped")
 			// find next param without a src:
 			while (param && !!nodes[param].src) param = gen.params[++upi];
 			if (param) {
+				//console.log("map to", param)
 				nodes[param].src = name;
 				node.to.push(param);
 			}
@@ -560,82 +569,102 @@ function generate_gloo(gloo) {
 	// normal cv outs etc. in the same way
 	{
 		let available = []
-		daisy.cv_outs.forEach((name, i)=>{
+		let i=0
+		daisy.device_outs.forEach(name => {
 			const node = nodes[name];
-			// does this output have an audio source?
+			// does this output have an cv source?
 			if (node.from.length) {
 				available.push(name);
 			} else if (available.length) {
-				//node.from.push( available[i % available.length] );
-				node.src = available[i % available.length];
+				node.src = available[i++ % available.length];
 			}
-		});
+		})
 	}
 
-	const name = gloo.name;
 	const struct = `
 
-struct App_${name} : public StaticApp<App_${name}> {
+struct App_${name} : public oopsy::App<App_${name}> {
 	${gen.params
 		.filter(name => nodes[name].src)
-		.concat(daisy.cv_outs, daisy.gate_outs)
+		.concat(daisy.device_outs)
 		.map(name=>`
 	float ${name};`).join("")}
-	${gloo.audio_outs.map(name=>`
-	float ${name}[GEN_DAISY_BUFFER_SIZE];`).join("")}
+	${app.audio_outs.map(name=>`
+	float ${name}[OOPSY_BUFFER_SIZE];`).join("")}
 	
-	void init(GenDaisy& gendaisy) {
-		gendaisy.gen = ${name}::create(gendaisy.samplerate, gendaisy.blocksize);
+	void init(oopsy::GenDaisy& daisy) {
+		daisy.gen = ${name}::create(daisy.samplerate, daisy.blocksize);
 		${gen.params
 			.filter(name => nodes[name].src)
-			.concat(daisy.cv_outs, daisy.gate_outs)
+			.concat(daisy.device_outs)
 			.map(name=>`
 		${name} = 0.f;`).join("")}
 	}	
 
-	void mainloopCallback(GenDaisy& gendaisy, uint32_t t, uint32_t dt) {
-		// whatever handling is needed here
-		Daisy& hardware = gendaisy.hardware;
-		${daisy.cv_outs.concat(daisy.gate_outs)
-			.filter(name => nodes[name].src || nodes[name].from.length)
-			.map((name, i)=>`
-		${nodes[name].set}`).join("")}
+	void mainloopCallback(oopsy::GenDaisy& daisy, uint32_t t, uint32_t dt) {
+		Daisy& hardware = daisy.hardware;
+		${name}::State& gen = *(${name}::State *)daisy.gen;
+		${daisy.device_outs.map(name => nodes[name])
+			.filter(node => node.src || node.from.length)
+			.filter(node => node.config.where == "main")
+			.map(node=>`
+		${interpolate(node.config.setter, node)};`).join("")}
 	}
 
-	void audioCallback(GenDaisy& gendaisy, float **hardware_ins, float **hardware_outs, size_t size) {
-		Daisy& hardware = gendaisy.hardware;
-		${name}::State& gen = *(${name}::State *)gendaisy.gen;
-		${daisy.knobs
-			.concat(daisy.switches, daisy.keys, daisy.cv_ins, daisy.gate_ins)
-			.filter(name => nodes[name].to.length)
-			.map(name=>`
-		float ${name} = ${nodes[name].get};`).join("")}
+	void displayCallback(oopsy::GenDaisy& daisy, uint32_t t, uint32_t dt) {
+		Daisy& hardware = daisy.hardware;
+		${name}::State& gen = *(${name}::State *)daisy.gen;
+		${daisy.mainhandlers.map(name => nodes[name])
+			.filter(node => node.data)
+			.map(node =>`
+		${interpolate(node.setter, node)};`).join("")}
+		${daisy.device_outs.map(name => nodes[name])
+			.filter(node => node.src || node.from.length)
+			.filter(node => node.config.where == "display")
+			.map(node=>`
+		${interpolate(node.config.setter, node)};`).join("")}
+	}
+
+	void audioCallback(oopsy::GenDaisy& daisy, float **hardware_ins, float **hardware_outs, size_t size) {
+		Daisy& hardware = daisy.hardware;
+		${name}::State& gen = *(${name}::State *)daisy.gen;
+		${daisy.device_inputs.map(name => nodes[name])
+			.filter(node => node.to.length)
+			.map(node=>`
+		float ${node.name} = ${node.get};`).join("")}
 		${gen.params.filter(name => nodes[name].src).map(name=>`
 		// ${nodes[name].label}
-		${name} = ${nodes[name].src}*${nodes[name].max-nodes[name].min} + ${nodes[name].min};
+		${name} = ${nodes[name].src}*${toCfloat(nodes[name].max-nodes[name].min)} + ${toCfloat(nodes[name].min)};
 		gen.set_${nodes[name].name}(${name});`).join("")}
 		${daisy.audio_ins.map((name, i)=>`
 		float * ${name} = hardware_ins[${i}];`).join("")}
 		${daisy.audio_outs.map((name, i)=>`
 		float * ${name} = hardware_outs[${i}];`).join("")}
-		${gloo.has_midi_in ? daisy.midi_ins.map(name=>`
-		float * ${name} = gendaisy.midi.in_data;`).join("") : ''}
+		${app.has_midi_in ? daisy.midi_ins.map(name=>`
+		float * ${name} = oopsy::midi.in_data;`).join("") : ''}
+		// ${gen.audio_ins.map(name=>nodes[name].label).join(", ")}:
 		float * inputs[] = { ${gen.audio_ins.map(name=>nodes[name].src).join(", ")} }; 
+		// ${gen.audio_outs.map(name=>nodes[name].label).join(", ")}:
 		float * outputs[] = { ${gen.audio_outs.map(name=>nodes[name].src).join(", ")} };
 		gen.perform(inputs, outputs, size);
-		${daisy.cv_outs.concat(daisy.gate_outs)
-			.filter(name => nodes[name].src || nodes[name].from.length > 0)
-			.map(name => nodes[name].src ? `
-		${name} = ${nodes[name].src};` : `
-		${name} = ${nodes[name].from.map(name=>name+"[size-1]").join(" + ")};`).join("")}
-		${gloo.has_midi_out ? daisy.midi_outs.map(name=>nodes[name].from.map(name=>`
-		gendaisy.midi.postperform(${name}, size);`).join("")).join("") : ''}
+		${daisy.device_outs.map(name => nodes[name])
+			.filter(node => node.src || node.from.length)
+			.map(node => node.src ? `
+		${node.name} = ${node.src};` : `
+		${node.name} = ${node.from.map(name=>name+"[size-1]").join(" + ")};`).join("")}
+		${daisy.device_outs.map(name => nodes[name])
+			.filter(node => node.src || node.from.length)
+			.filter(node => node.config.where == "audio")
+			.map(node=>`
+		${interpolate(node.config.setter, node)};`).join("")}
+		${app.has_midi_out ? daisy.midi_outs.map(name=>nodes[name].from.map(name=>`
+		oopsy::midi.postperform(${name}, size);`).join("")).join("") : ''}
 	}
 };`
-	gloo.cpp = {
+	app.cpp = {
 		union: `App_${name} app_${name};`,
-		appdef: `{"${name}", []()->void { gendaisy.reset(apps.app_${name}); } },`,
+		appdef: `{"${name}", []()->void { oopsy::daisy.reset(apps.app_${name}); } },`,
 		struct: struct,
 	}
-	return gloo
+	return app
 }
diff --git a/templates/oopsy_field.maxpat b/templates/oopsy_field.maxpat
new file mode 100644
index 0000000..401ab1d
--- /dev/null
+++ b/templates/oopsy_field.maxpat
@@ -0,0 +1,2212 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "box",
+		"rect" : [ 890.0, 138.0, 756.0, 523.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-23",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 279.0, 127.942857142857122, 48.0, 20.0 ],
+					"text" : "etc."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-21",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 279.0, 198.771428571428544, 48.0, 20.0 ],
+					"text" : "etc."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-16",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 279.0, 270.714285714285666, 48.0, 20.0 ],
+					"text" : "etc."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "keyB2",
+					"displaymode" : 8,
+					"id" : "obj-12",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 246.714285714285666, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Arial Italic",
+					"fontsize" : 18.0,
+					"id" : "obj-24",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 24.0, 22.0, 221.0, 27.0 ],
+					"text" : "Template for DaisyField"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-22",
+					"maxclass" : "toggle",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "int" ],
+					"parameter_enable" : 0,
+					"patching_rect" : [ 215.0, 376.0, 24.0, 24.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-20",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 2,
+					"outlettype" : [ "bang", "bang" ],
+					"patching_rect" : [ 215.0, 344.0, 42.0, 22.0 ],
+					"text" : "edge~"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-19",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 215.0, 402.0, 42.0, 20.0 ],
+					"text" : "gate"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-18",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 155.0, 402.0, 42.0, 20.0 ],
+					"text" : "cv2"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-17",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 94.0, 400.0, 42.0, 20.0 ],
+					"text" : "cv1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-14",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 155.0, 376.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-1",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 94.0, 376.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-13",
+					"maxclass" : "ezdac~",
+					"numinlets" : 2,
+					"numoutlets" : 0,
+					"patching_rect" : [ 24.0, 448.0, 45.0, 45.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-11",
+					"lastchannelcount" : 0,
+					"maxclass" : "live.gain~",
+					"numinlets" : 2,
+					"numoutlets" : 5,
+					"outlettype" : [ "signal", "signal", "", "float", "list" ],
+					"parameter_enable" : 1,
+					"patching_rect" : [ 24.0, 342.0, 44.0, 90.0 ],
+					"saved_attribute_attributes" : 					{
+						"valueof" : 						{
+							"parameter_longname" : "live.gain~",
+							"parameter_mmax" : 6.0,
+							"parameter_mmin" : -70.0,
+							"parameter_shortname" : "live.gain~",
+							"parameter_type" : 0,
+							"parameter_unitstyle" : 4
+						}
+
+					}
+,
+					"varname" : "live.gain~"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "keyA1",
+					"displaymode" : 8,
+					"id" : "obj-10",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 222.714285714285666, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "@loop", 1, "@file", "jongly.aif" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-7",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "demosound.maxpat",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"offset" : [ 0.0, 0.0 ],
+					"outlettype" : [ "signal" ],
+					"patching_rect" : [ 24.0, 55.0, 225.0, 105.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontsize" : 24.0,
+					"id" : "obj-3",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 6,
+					"outlettype" : [ "signal", "signal", "signal", "signal", "signal", "signal" ],
+					"patcher" : 					{
+						"fileversion" : 1,
+						"appversion" : 						{
+							"major" : 8,
+							"minor" : 1,
+							"revision" : 8,
+							"architecture" : "x64",
+							"modernui" : 1
+						}
+,
+						"classnamespace" : "dsp.gen",
+						"rect" : [ 84.0, 103.0, 1095.0, 792.0 ],
+						"bglocked" : 0,
+						"openinpresentation" : 0,
+						"default_fontsize" : 12.0,
+						"default_fontface" : 0,
+						"default_fontname" : "Arial",
+						"gridonopen" : 1,
+						"gridsize" : [ 15.0, 15.0 ],
+						"gridsnaponopen" : 1,
+						"objectsnaponopen" : 1,
+						"statusbarvisible" : 2,
+						"toolbarvisible" : 1,
+						"lefttoolbarpinned" : 0,
+						"toptoolbarpinned" : 0,
+						"righttoolbarpinned" : 0,
+						"bottomtoolbarpinned" : 0,
+						"toolbars_unpinned_last_save" : 0,
+						"tallnewobj" : 0,
+						"boxanimatetime" : 200,
+						"enablehscroll" : 1,
+						"enablevscroll" : 1,
+						"devicewidth" : 0.0,
+						"description" : "",
+						"digest" : "",
+						"tags" : "",
+						"style" : "",
+						"subpatcher_template" : "",
+						"assistshowspatchername" : 0,
+						"boxes" : [ 							{
+								"box" : 								{
+									"id" : "obj-36",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 916.633333333333439, 34.0, 139.0, 20.0 ],
+									"text" : "MIDI:"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-19",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 916.633333333333439, 67.5, 53.0, 22.0 ],
+									"text" : "in 3 midi"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-30",
+									"linecount" : 7,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 936.633333333333439, 128.5, 139.0, 100.0 ],
+									"text" : "\"midi\" input/output is converted to/from normalized byte streams. See the MIDI examples more info on how to read and write these. "
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-51",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 916.633333333333439, 323.0, 61.0, 22.0 ],
+									"text" : "out 6 midi"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-88",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 913.133333333333326, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB8"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-89",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 926.800000000000182, 671.0, 22.0, 22.0 ],
+									"text" : "15"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-90",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 913.133333333333439, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-91",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 830.990476190476215, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB7"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-92",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 843.800000000000068, 671.0, 22.0, 22.0 ],
+									"text" : "14"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-93",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 830.133333333333439, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-94",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 748.847619047619105, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB6"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-95",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 762.800000000000182, 671.0, 22.0, 22.0 ],
+									"text" : "13"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-96",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 748.133333333333553, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-97",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 666.704761904761995, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB5"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-98",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 679.800000000000068, 671.0, 22.0, 22.0 ],
+									"text" : "12"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-99",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 666.133333333333439, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-100",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 584.561904761904884, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-101",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 598.800000000000182, 671.0, 21.0, 22.0 ],
+									"text" : "11"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-102",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 584.561904761904884, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-103",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 502.419047619047774, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-104",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 515.800000000000068, 671.0, 22.0, 22.0 ],
+									"text" : "10"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-105",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 502.133333333333439, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-106",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 420.276190476190607, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-107",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 434.800000000000182, 671.0, 19.0, 22.0 ],
+									"text" : "9"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-108",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 421.133333333333553, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-109",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 338.133333333333439, 640.0, 79.0, 22.0 ],
+									"text" : "param keyB1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-110",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 351.800000000000068, 671.0, 19.0, 22.0 ],
+									"text" : "8"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-111",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 338.133333333333439, 696.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-76",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 913.133333333333326, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA8"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-77",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 926.800000000000182, 584.0, 19.0, 22.0 ],
+									"text" : "7"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-78",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 913.133333333333439, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-79",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 830.990476190476215, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA7"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-80",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 843.800000000000068, 584.0, 19.0, 22.0 ],
+									"text" : "6"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-81",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 830.133333333333439, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-82",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 748.847619047619105, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA6"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-83",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 762.800000000000182, 584.0, 19.0, 22.0 ],
+									"text" : "5"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-84",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 748.133333333333553, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-85",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 666.704761904761995, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA5"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-86",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 679.800000000000068, 584.0, 19.0, 22.0 ],
+									"text" : "4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-87",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 666.133333333333439, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-70",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 584.561904761904884, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-71",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 598.800000000000182, 584.0, 19.0, 22.0 ],
+									"text" : "3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-72",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 584.561904761904884, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-73",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 502.419047619047774, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-74",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 515.800000000000068, 584.0, 19.0, 22.0 ],
+									"text" : "2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-75",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 502.133333333333439, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-67",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 420.276190476190607, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-68",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 434.800000000000182, 584.0, 19.0, 22.0 ],
+									"text" : "1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-69",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 421.133333333333553, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-66",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 338.133333333333439, 553.0, 79.0, 22.0 ],
+									"text" : "param keyA1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-64",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 351.800000000000068, 584.0, 19.0, 22.0 ],
+									"text" : "0"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-65",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 338.133333333333439, 609.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-63",
+									"linecount" : 6,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 42.5, 553.0, 256.0, 87.0 ],
+									"text" : "Use a [data leds 24] to address the LEDs on Field, since there are so many of them. \n\nLEDS 0-7 correspond to buttons A1-8\nLEDS 8-15 correspond to buttons B1-8\nLEDS 16-23 correspond to knobs 1-8"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-54",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 408.633333333333439, 295.0, 22.0, 22.0 ],
+									"text" : "23"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-55",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 394.966666666666697, 320.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-56",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 392.900000000000091, 345.0, 22.0, 22.0 ],
+									"text" : "22"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-57",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 379.233333333333462, 370.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-58",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 377.033333333333417, 395.0, 22.0, 22.0 ],
+									"text" : "21"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-59",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 363.366666666666731, 420.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-60",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 361.300000000000125, 446.0, 22.0, 22.0 ],
+									"text" : "20"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-61",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 347.633333333333439, 471.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-49",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 272.56666666666672, 295.0, 22.0, 22.0 ],
+									"text" : "19"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-50",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 258.899999999999977, 320.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-52",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 256.833333333333371, 345.0, 22.0, 22.0 ],
+									"text" : "18"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-53",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 243.166666666666714, 370.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-47",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 240.966666666666697, 395.0, 22.0, 22.0 ],
+									"text" : "17"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-48",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 227.300000000000011, 420.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-46",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 225.233333333333377, 446.0, 22.0, 22.0 ],
+									"text" : "16"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-45",
+									"maxclass" : "newobj",
+									"numinlets" : 4,
+									"numoutlets" : 0,
+									"patching_rect" : [ 211.56666666666672, 471.0, 60.0, 22.0 ],
+									"text" : "poke leds"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-44",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 2,
+									"outlettype" : [ "", "" ],
+									"patching_rect" : [ 42.5, 522.0, 74.0, 22.0 ],
+									"text" : "data leds 24"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-40",
+									"linecount" : 3,
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 394.899999999999977, 154.0, 80.0, 49.0 ],
+									"text" : "param knob8 @min 0 @max 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-41",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 379.100000000000023, 124.599099099636078, 79.0, 22.0 ],
+									"text" : "param knob7"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-42",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 363.300000000000011, 96.0, 79.0, 22.0 ],
+									"text" : "param knob6"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-43",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 347.5, 69.0, 79.0, 22.0 ],
+									"text" : "param knob5"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-10",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 258.899999999999977, 154.0, 79.0, 22.0 ],
+									"text" : "param knob4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-22",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 243.099999999999994, 124.599099099636078, 79.0, 22.0 ],
+									"text" : "param knob3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-23",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 227.300000000000011, 96.0, 79.0, 22.0 ],
+									"text" : "param knob2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-24",
+									"linecount" : 3,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 272.56666666666672, 185.0, 74.288288295269012, 47.0 ],
+									"text" : "knob1_foo etc also works"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-32",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 211.5, 69.0, 79.0, 22.0 ],
+									"text" : "param knob1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-35",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 211.5, 34.0, 150.0, 20.0 ],
+									"text" : "Knobs"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-21",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 570.5, 296.0, 36.5, 22.0 ],
+									"text" : "min"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-20",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 509.5, 296.0, 38.0, 22.0 ],
+									"text" : "max"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-39",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 42.5, 667.0, 107.0, 22.0 ],
+									"text" : "oopsy.suggestions"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-38",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 7.5, 323.0, 69.0, 20.0 ],
+									"text" : "OUTPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-37",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 7.5, 69.0, 69.0, 20.0 ],
+									"text" : "INPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-34",
+									"linecount" : 4,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 702.5, 426.0, 201.0, 60.0 ],
+									"text" : "Gate will be low (0v) if the value here is equal to or less than zero, and high (5v) if the value here is greater than zero. "
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-33",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 702.5, 323.0, 69.0, 22.0 ],
+									"text" : "out 5 gate1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-31",
+									"linecount" : 2,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 509.5, 426.0, 189.0, 33.0 ],
+									"text" : "CV outputs clamp a 0..1 range to 0-5v on the Daisy hardware. "
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-29",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 570.5, 323.0, 57.0, 22.0 ],
+									"text" : "out 4 cv2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-28",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 509.5, 323.0, 57.0, 22.0 ],
+									"text" : "out 3 cv1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-27",
+									"linecount" : 3,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 702.5, 357.400900900363922, 201.0, 47.0 ],
+									"text" : "Gate inputs are similar to CVs, but the input is always either @min or @max, also 0 or 1 by default."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-26",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 702.5, 67.5, 76.0, 22.0 ],
+									"text" : "param gate1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-17",
+									"linecount" : 4,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 509.5, 357.400900900363922, 189.0, 60.0 ],
+									"text" : "CV inputs of 0v to 5v will be mapped to the @min..@max range. @min @max are 0 and 1 by default."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-16",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 588.0, 144.0, 65.0, 22.0 ],
+									"text" : "param cv4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-15",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 570.5, 118.5, 65.0, 22.0 ],
+									"text" : "param cv3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-14",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 528.5, 92.900900900363922, 65.0, 22.0 ],
+									"text" : "param cv2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-2",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 509.5, 69.0, 65.0, 22.0 ],
+									"text" : "param cv1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-12",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 509.5, 34.0, 150.0, 20.0 ],
+									"text" : "CV/Gate etc."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-11",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 115.5, 34.0, 69.0, 20.0 ],
+									"text" : "Audio IOs"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-3",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 156.5, 69.0, 28.0, 22.0 ],
+									"text" : "in 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-5",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 156.5, 323.0, 35.0, 22.0 ],
+									"text" : "out 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-1",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 115.5, 69.0, 28.0, 22.0 ],
+									"text" : "in 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-4",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 115.5, 323.0, 35.0, 22.0 ],
+									"text" : "out 1"
+								}
+
+							}
+ ],
+						"lines" : [ 							{
+								"patchline" : 								{
+									"destination" : [ "obj-4", 0 ],
+									"source" : [ "obj-1", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-50", 0 ],
+									"source" : [ "obj-10", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-102", 0 ],
+									"source" : [ "obj-100", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-102", 1 ],
+									"source" : [ "obj-101", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-105", 0 ],
+									"source" : [ "obj-103", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-105", 1 ],
+									"source" : [ "obj-104", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-108", 0 ],
+									"source" : [ "obj-106", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-108", 1 ],
+									"source" : [ "obj-107", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-111", 0 ],
+									"source" : [ "obj-109", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-111", 1 ],
+									"source" : [ "obj-110", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-20", 1 ],
+									"source" : [ "obj-14", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-21", 0 ],
+									"source" : [ "obj-15", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-21", 1 ],
+									"source" : [ "obj-16", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-51", 0 ],
+									"source" : [ "obj-19", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-20", 0 ],
+									"source" : [ "obj-2", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-28", 0 ],
+									"source" : [ "obj-20", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-29", 0 ],
+									"source" : [ "obj-21", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-53", 0 ],
+									"source" : [ "obj-22", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-48", 0 ],
+									"source" : [ "obj-23", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-33", 0 ],
+									"source" : [ "obj-26", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-5", 0 ],
+									"source" : [ "obj-3", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-45", 0 ],
+									"source" : [ "obj-32", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-55", 0 ],
+									"source" : [ "obj-40", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-57", 0 ],
+									"source" : [ "obj-41", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-59", 0 ],
+									"source" : [ "obj-42", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-61", 0 ],
+									"source" : [ "obj-43", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-45", 1 ],
+									"source" : [ "obj-46", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-48", 1 ],
+									"source" : [ "obj-47", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-50", 1 ],
+									"source" : [ "obj-49", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-53", 1 ],
+									"source" : [ "obj-52", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-55", 1 ],
+									"source" : [ "obj-54", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-57", 1 ],
+									"source" : [ "obj-56", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-59", 1 ],
+									"source" : [ "obj-58", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-61", 1 ],
+									"source" : [ "obj-60", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-65", 1 ],
+									"source" : [ "obj-64", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-65", 0 ],
+									"source" : [ "obj-66", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-69", 0 ],
+									"source" : [ "obj-67", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-69", 1 ],
+									"source" : [ "obj-68", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-72", 0 ],
+									"source" : [ "obj-70", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-72", 1 ],
+									"source" : [ "obj-71", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-75", 0 ],
+									"source" : [ "obj-73", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-75", 1 ],
+									"source" : [ "obj-74", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-78", 0 ],
+									"source" : [ "obj-76", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-78", 1 ],
+									"source" : [ "obj-77", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-81", 0 ],
+									"source" : [ "obj-79", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-81", 1 ],
+									"source" : [ "obj-80", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-84", 0 ],
+									"source" : [ "obj-82", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-84", 1 ],
+									"source" : [ "obj-83", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-87", 0 ],
+									"source" : [ "obj-85", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-87", 1 ],
+									"source" : [ "obj-86", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-90", 0 ],
+									"source" : [ "obj-88", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-90", 1 ],
+									"source" : [ "obj-89", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-93", 0 ],
+									"source" : [ "obj-91", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-93", 1 ],
+									"source" : [ "obj-92", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-96", 0 ],
+									"source" : [ "obj-94", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-96", 1 ],
+									"source" : [ "obj-95", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-99", 0 ],
+									"source" : [ "obj-97", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-99", 1 ],
+									"source" : [ "obj-98", 0 ]
+								}
+
+							}
+ ]
+					}
+,
+					"patching_rect" : [ 24.0, 290.0, 194.0, 35.0 ],
+					"text" : "gen~"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "cv1",
+					"id" : "obj-2",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 81.0, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "cv2",
+					"id" : "obj-4",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 103.942857142857122, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "gate1",
+					"displaymode" : 8,
+					"id" : "obj-5",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 57.0, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "knob1",
+					"id" : "obj-6",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 151.828571428571394, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "knob2",
+					"id" : "obj-8",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 174.771428571428544, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "@target", "field" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 567.5, 57.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-10", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 1 ],
+					"source" : [ "obj-11", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 0 ],
+					"source" : [ "obj-11", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-12", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-2", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-22", 0 ],
+					"source" : [ "obj-20", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-22", 0 ],
+					"source" : [ "obj-20", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-3", 2 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 1 ],
+					"source" : [ "obj-3", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 0 ],
+					"source" : [ "obj-3", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-14", 0 ],
+					"source" : [ "obj-3", 3 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-20", 0 ],
+					"source" : [ "obj-3", 4 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-4", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-7", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+ ],
+		"parameters" : 		{
+			"obj-11" : [ "live.gain~", "live.gain~", 0 ],
+			"obj-7::obj-21::obj-6" : [ "live.tab[3]", "live.tab[1]", 0 ],
+			"obj-7::obj-35" : [ "[5]", "Level", 0 ],
+			"obj-9::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
+			"parameterbanks" : 			{
+
+			}
+,
+			"inherited_shortname" : 1
+		}
+,
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.maxpat",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
+				"patcherrelativepath" : "../patchers",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.suggestions.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.ctrl.smooth3.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "demosound.maxpat",
+				"bootpath" : "C74:/help/msp",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "sine.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "saw.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "square.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "random.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "interfacecolor.js",
+				"bootpath" : "C74:/interfaces",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+ ],
+		"autosave" : 0
+	}
+
+}
diff --git a/templates/oopsy_patch.maxpat b/templates/oopsy_patch.maxpat
new file mode 100644
index 0000000..c8fee48
--- /dev/null
+++ b/templates/oopsy_patch.maxpat
@@ -0,0 +1,1107 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "box",
+		"rect" : [ 431.0, 199.0, 711.0, 513.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"fontname" : "Arial Italic",
+					"fontsize" : 18.0,
+					"id" : "obj-24",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 24.0, 22.0, 221.0, 27.0 ],
+					"text" : "Template for DaisyPatch"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-22",
+					"maxclass" : "toggle",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "int" ],
+					"parameter_enable" : 0,
+					"patching_rect" : [ 243.0, 365.0, 24.0, 24.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-20",
+					"maxclass" : "newobj",
+					"numinlets" : 1,
+					"numoutlets" : 2,
+					"outlettype" : [ "bang", "bang" ],
+					"patching_rect" : [ 243.0, 333.0, 42.0, 22.0 ],
+					"text" : "edge~"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-19",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 243.0, 391.0, 42.0, 20.0 ],
+					"text" : "gate"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-18",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 183.0, 391.0, 42.0, 20.0 ],
+					"text" : "cv2"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-17",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 122.0, 389.0, 42.0, 20.0 ],
+					"text" : "cv1"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-14",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 183.0, 365.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-1",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 122.0, 365.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-13",
+					"maxclass" : "ezdac~",
+					"numinlets" : 2,
+					"numoutlets" : 0,
+					"patching_rect" : [ 24.0, 425.0, 45.0, 45.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-12",
+					"lastchannelcount" : 0,
+					"maxclass" : "live.gain~",
+					"numinlets" : 2,
+					"numoutlets" : 5,
+					"outlettype" : [ "signal", "signal", "", "float", "list" ],
+					"parameter_enable" : 1,
+					"patching_rect" : [ 73.0, 319.0, 44.0, 90.0 ],
+					"saved_attribute_attributes" : 					{
+						"valueof" : 						{
+							"parameter_longname" : "live.gain~[1]",
+							"parameter_mmax" : 6.0,
+							"parameter_mmin" : -70.0,
+							"parameter_shortname" : "live.gain~",
+							"parameter_type" : 0,
+							"parameter_unitstyle" : 4
+						}
+
+					}
+,
+					"varname" : "live.gain~[1]"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-11",
+					"lastchannelcount" : 0,
+					"maxclass" : "live.gain~",
+					"numinlets" : 2,
+					"numoutlets" : 5,
+					"outlettype" : [ "signal", "signal", "", "float", "list" ],
+					"parameter_enable" : 1,
+					"patching_rect" : [ 24.0, 319.0, 44.0, 90.0 ],
+					"saved_attribute_attributes" : 					{
+						"valueof" : 						{
+							"parameter_longname" : "live.gain~",
+							"parameter_mmax" : 6.0,
+							"parameter_mmin" : -70.0,
+							"parameter_shortname" : "live.gain~",
+							"parameter_type" : 0,
+							"parameter_unitstyle" : 4
+						}
+
+					}
+,
+					"varname" : "live.gain~"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "gate2",
+					"displaymode" : 8,
+					"id" : "obj-10",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 211.714285714285666, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "@loop", 1, "@file", "jongly.aif" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-7",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "demosound.maxpat",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"offset" : [ 0.0, 0.0 ],
+					"outlettype" : [ "signal" ],
+					"patching_rect" : [ 24.0, 97.0, 225.0, 105.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "field", "@target", "patch" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 485.5, 97.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontsize" : 24.0,
+					"id" : "obj-3",
+					"maxclass" : "newobj",
+					"numinlets" : 5,
+					"numoutlets" : 8,
+					"outlettype" : [ "signal", "signal", "signal", "signal", "signal", "signal", "signal", "signal" ],
+					"patcher" : 					{
+						"fileversion" : 1,
+						"appversion" : 						{
+							"major" : 8,
+							"minor" : 1,
+							"revision" : 8,
+							"architecture" : "x64",
+							"modernui" : 1
+						}
+,
+						"classnamespace" : "dsp.gen",
+						"rect" : [ 84.0, 103.0, 1101.0, 556.0 ],
+						"bglocked" : 0,
+						"openinpresentation" : 0,
+						"default_fontsize" : 12.0,
+						"default_fontface" : 0,
+						"default_fontname" : "Arial",
+						"gridonopen" : 1,
+						"gridsize" : [ 15.0, 15.0 ],
+						"gridsnaponopen" : 1,
+						"objectsnaponopen" : 1,
+						"statusbarvisible" : 2,
+						"toolbarvisible" : 1,
+						"lefttoolbarpinned" : 0,
+						"toptoolbarpinned" : 0,
+						"righttoolbarpinned" : 0,
+						"bottomtoolbarpinned" : 0,
+						"toolbars_unpinned_last_save" : 0,
+						"tallnewobj" : 0,
+						"boxanimatetime" : 200,
+						"enablehscroll" : 1,
+						"enablevscroll" : 1,
+						"devicewidth" : 0.0,
+						"description" : "",
+						"digest" : "",
+						"tags" : "",
+						"style" : "",
+						"subpatcher_template" : "",
+						"assistshowspatchername" : 0,
+						"boxes" : [ 							{
+								"box" : 								{
+									"id" : "obj-21",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 369.5, 323.0, 36.5, 22.0 ],
+									"text" : "min"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-20",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 308.5, 323.0, 38.0, 22.0 ],
+									"text" : "max"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-18",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 511.5, 133.0, 29.5, 22.0 ],
+									"text" : "or"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-39",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 911.5, 96.0, 107.0, 22.0 ],
+									"text" : "oopsy.suggestions"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-38",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 9.5, 350.0, 69.0, 20.0 ],
+									"text" : "OUTPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-37",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 9.5, 96.0, 69.0, 20.0 ],
+									"text" : "INPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-36",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 727.0, 61.0, 139.0, 20.0 ],
+									"text" : "MIDI:"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-34",
+									"linecount" : 4,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 511.5, 453.0, 201.0, 60.0 ],
+									"text" : "Gate will be low (0v) if the value here is equal to or less than zero, and high (5v) if the value here is greater than zero. "
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-33",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 511.5, 350.0, 69.0, 22.0 ],
+									"text" : "out 7 gate1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-31",
+									"linecount" : 2,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 308.5, 453.0, 189.0, 33.0 ],
+									"text" : "CV outputs clamp a 0..1 range to 0-5v on the Daisy hardware. "
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-29",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 369.5, 350.0, 57.0, 22.0 ],
+									"text" : "out 6 cv2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-28",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 308.5, 350.0, 57.0, 22.0 ],
+									"text" : "out 5 cv1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-27",
+									"linecount" : 3,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 511.5, 384.400900900363922, 201.0, 47.0 ],
+									"text" : "Gate inputs are similar to CVs, but the input is always either @min or @max, also 0 or 1 by default."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-25",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 594.5, 96.0, 76.0, 22.0 ],
+									"text" : "param gate2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-26",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 511.5, 94.5, 76.0, 22.0 ],
+									"text" : "param gate1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-19",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 727.0, 94.5, 53.0, 22.0 ],
+									"text" : "in 5 midi"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-30",
+									"linecount" : 7,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 747.0, 155.5, 139.0, 100.0 ],
+									"text" : "\"midi\" input/output is converted to/from normalized byte streams. See the MIDI examples more info on how to read and write these. "
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-51",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 727.0, 350.0, 61.0, 22.0 ],
+									"text" : "out 8 midi"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-17",
+									"linecount" : 4,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 308.5, 384.400900900363922, 189.0, 60.0 ],
+									"text" : "CV inputs of 0v to 5v will be mapped to the @min..@max range. @min @max are 0 and 1 by default."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-16",
+									"linecount" : 3,
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 387.0, 171.0, 86.0, 49.0 ],
+									"text" : "param ctrl4 @min -10 @max 10"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-15",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 369.5, 145.5, 69.0, 22.0 ],
+									"text" : "param ctrl3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-14",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 327.5, 119.900900900363922, 69.0, 22.0 ],
+									"text" : "param ctrl2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-13",
+									"linecount" : 3,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 407.211711704730988, 225.0, 74.288288295269012, 47.0 ],
+									"text" : "cv1, knob1, cv1_foo, etc. all work"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-2",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 308.5, 96.0, 69.0, 22.0 ],
+									"text" : "param ctrl1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-12",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 308.5, 61.0, 150.0, 20.0 ],
+									"text" : "Knob/CV/Gate etc."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-11",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 117.5, 61.0, 150.0, 20.0 ],
+									"text" : "Audio IOs"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-6",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 240.5, 96.0, 28.0, 22.0 ],
+									"text" : "in 4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-7",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 240.5, 350.0, 35.0, 22.0 ],
+									"text" : "out 4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-8",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 199.5, 96.0, 28.0, 22.0 ],
+									"text" : "in 3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-9",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 199.5, 350.0, 35.0, 22.0 ],
+									"text" : "out 3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-3",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 158.5, 96.0, 28.0, 22.0 ],
+									"text" : "in 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-5",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 158.5, 350.0, 35.0, 22.0 ],
+									"text" : "out 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-1",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 117.5, 96.0, 28.0, 22.0 ],
+									"text" : "in 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-4",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 117.5, 350.0, 35.0, 22.0 ],
+									"text" : "out 1"
+								}
+
+							}
+ ],
+						"lines" : [ 							{
+								"patchline" : 								{
+									"destination" : [ "obj-4", 0 ],
+									"source" : [ "obj-1", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-20", 1 ],
+									"source" : [ "obj-14", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-21", 0 ],
+									"source" : [ "obj-15", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-21", 1 ],
+									"source" : [ "obj-16", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-33", 0 ],
+									"source" : [ "obj-18", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-51", 0 ],
+									"source" : [ "obj-19", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-20", 0 ],
+									"source" : [ "obj-2", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-28", 0 ],
+									"source" : [ "obj-20", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-29", 0 ],
+									"source" : [ "obj-21", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-18", 1 ],
+									"source" : [ "obj-25", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-18", 0 ],
+									"source" : [ "obj-26", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-5", 0 ],
+									"source" : [ "obj-3", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-7", 0 ],
+									"source" : [ "obj-6", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-9", 0 ],
+									"source" : [ "obj-8", 0 ]
+								}
+
+							}
+ ]
+					}
+,
+					"patching_rect" : [ 24.0, 267.0, 194.0, 35.0 ],
+					"saved_object_attributes" : 					{
+						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/templates/",
+						"exportname" : "oopsy_patch"
+					}
+,
+					"text" : "gen~",
+					"varname" : "oopsy_patch"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "ctrl1",
+					"id" : "obj-2",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 97.0, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "ctrl2",
+					"id" : "obj-4",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 119.942857142857122, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "ctrl3",
+					"id" : "obj-5",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 142.885714285714272, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "ctrl4",
+					"id" : "obj-6",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 165.828571428571394, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "gate1",
+					"displaymode" : 8,
+					"id" : "obj-8",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 269.0, 188.771428571428544, 150.0, 22.0 ]
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-10", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 1 ],
+					"source" : [ "obj-11", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 0 ],
+					"source" : [ "obj-11", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-2", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-22", 0 ],
+					"source" : [ "obj-20", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-22", 0 ],
+					"source" : [ "obj-20", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-3", 4 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 1 ],
+					"source" : [ "obj-3", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 0 ],
+					"source" : [ "obj-3", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-12", 1 ],
+					"source" : [ "obj-3", 3 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-12", 0 ],
+					"source" : [ "obj-3", 2 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-14", 0 ],
+					"source" : [ "obj-3", 5 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-20", 0 ],
+					"source" : [ "obj-3", 6 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-4", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-7", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+ ],
+		"parameters" : 		{
+			"obj-11" : [ "live.gain~", "live.gain~", 0 ],
+			"obj-12" : [ "live.gain~[1]", "live.gain~", 0 ],
+			"obj-7::obj-21::obj-6" : [ "live.tab[3]", "live.tab[1]", 0 ],
+			"obj-7::obj-35" : [ "[5]", "Level", 0 ],
+			"obj-9::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
+			"parameterbanks" : 			{
+
+			}
+,
+			"inherited_shortname" : 1
+		}
+,
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.suggestions.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.gate.min.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.ctrl.smooth3.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.ctrl.smooth2.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.maxpat",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
+				"patcherrelativepath" : "../patchers",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "demosound.maxpat",
+				"bootpath" : "C74:/help/msp",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "sine.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "saw.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "square.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "random.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "interfacecolor.js",
+				"bootpath" : "C74:/interfaces",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+ ],
+		"autosave" : 0
+	}
+
+}
diff --git a/templates/oopsy_petal.maxpat b/templates/oopsy_petal.maxpat
new file mode 100644
index 0000000..2400000
--- /dev/null
+++ b/templates/oopsy_petal.maxpat
@@ -0,0 +1,981 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "box",
+		"rect" : [ 672.0, 224.0, 496.0, 523.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-17",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 262.333333333333371, 110.942857142857122, 150.0, 20.0 ],
+					"text" : "etc."
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-12",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 140.0, 314.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-14",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 140.0, 285.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-3",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 75.0, 314.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontface" : 0,
+					"fontname" : "Arial",
+					"fontsize" : 12.0,
+					"id" : "obj-1",
+					"maxclass" : "number~",
+					"mode" : 2,
+					"numinlets" : 2,
+					"numoutlets" : 2,
+					"outlettype" : [ "signal", "float" ],
+					"patching_rect" : [ 75.0, 285.0, 56.0, 22.0 ],
+					"sig" : 0.0
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Arial Italic",
+					"fontsize" : 18.0,
+					"id" : "obj-24",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 19.333333333333343, 22.0, 221.0, 27.0 ],
+					"text" : "Template for DaisyPetal"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-13",
+					"maxclass" : "ezdac~",
+					"numinlets" : 2,
+					"numoutlets" : 0,
+					"patching_rect" : [ 17.333333333333343, 393.0, 45.0, 45.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-11",
+					"lastchannelcount" : 0,
+					"maxclass" : "live.gain~",
+					"numinlets" : 2,
+					"numoutlets" : 5,
+					"outlettype" : [ "signal", "signal", "", "float", "list" ],
+					"parameter_enable" : 1,
+					"patching_rect" : [ 17.333333333333343, 287.0, 44.0, 90.0 ],
+					"saved_attribute_attributes" : 					{
+						"valueof" : 						{
+							"parameter_longname" : "live.gain~",
+							"parameter_mmax" : 6.0,
+							"parameter_mmin" : -70.0,
+							"parameter_shortname" : "live.gain~",
+							"parameter_type" : 0,
+							"parameter_unitstyle" : 4
+						}
+
+					}
+,
+					"varname" : "live.gain~"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "@loop", 1, "@file", "jongly.aif" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-7",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "demosound.maxpat",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"offset" : [ 0.0, 0.0 ],
+					"outlettype" : [ "signal" ],
+					"patching_rect" : [ 17.333333333333343, 65.0, 225.0, 105.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "sw1",
+					"id" : "obj-2",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 262.333333333333371, 65.0, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "sw2",
+					"id" : "obj-4",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 262.333333333333371, 87.942857142857122, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "knob5",
+					"id" : "obj-5",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 262.333333333333371, 128.885714285714272, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "knob6",
+					"id" : "obj-6",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 262.333333333333371, 151.828571428571394, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "exp",
+					"displaymode" : 1,
+					"id" : "obj-8",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 262.333333333333371, 174.771428571428544, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "@target", "petal" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 267.5, 327.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"color" : [ 0.254901960784314, 0.533333333333333, 0.258823529411765, 1.0 ],
+					"fontsize" : 24.0,
+					"id" : "obj-16",
+					"maxclass" : "newobj",
+					"numinlets" : 2,
+					"numoutlets" : 6,
+					"outlettype" : [ "signal", "signal", "signal", "signal", "signal", "signal" ],
+					"patcher" : 					{
+						"fileversion" : 1,
+						"appversion" : 						{
+							"major" : 8,
+							"minor" : 1,
+							"revision" : 8,
+							"architecture" : "x64",
+							"modernui" : 1
+						}
+,
+						"classnamespace" : "dsp.gen",
+						"rect" : [ 67.0, 198.0, 1141.0, 427.0 ],
+						"bglocked" : 0,
+						"openinpresentation" : 0,
+						"default_fontsize" : 12.0,
+						"default_fontface" : 0,
+						"default_fontname" : "Arial",
+						"gridonopen" : 1,
+						"gridsize" : [ 15.0, 15.0 ],
+						"gridsnaponopen" : 1,
+						"objectsnaponopen" : 1,
+						"statusbarvisible" : 2,
+						"toolbarvisible" : 1,
+						"lefttoolbarpinned" : 0,
+						"toptoolbarpinned" : 0,
+						"righttoolbarpinned" : 0,
+						"bottomtoolbarpinned" : 0,
+						"toolbars_unpinned_last_save" : 0,
+						"tallnewobj" : 0,
+						"boxanimatetime" : 200,
+						"enablehscroll" : 1,
+						"enablevscroll" : 1,
+						"devicewidth" : 0.0,
+						"description" : "",
+						"digest" : "",
+						"tags" : "",
+						"style" : "",
+						"subpatcher_template" : "",
+						"assistshowspatchername" : 0,
+						"boxes" : [ 							{
+								"box" : 								{
+									"id" : "obj-28",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 2,
+									"outlettype" : [ "", "" ],
+									"patching_rect" : [ 628.0, 314.0, 46.0, 22.0 ],
+									"text" : "cycle 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-13",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 77.0, 221.0, 29.5, 22.0 ],
+									"text" : "*"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-12",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 77.0, 178.0, 37.0, 22.0 ],
+									"text" : "noise"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-10",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 77.0, 264.0, 29.5, 22.0 ],
+									"text" : "*"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-26",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 458.140522875816941, 341.0, 61.0, 22.0 ],
+									"text" : "out 6 led4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-27",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 381.5, 341.0, 61.0, 22.0 ],
+									"text" : "out 5 led3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-25",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 301.140522875816941, 341.0, 61.0, 22.0 ],
+									"text" : "out 4 led2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-24",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 235.5, 341.0, 61.0, 22.0 ],
+									"text" : "out 3 led1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-23",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 535.5, 88.0, 65.0, 22.0 ],
+									"text" : "param exp"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-20",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 320.547120418848181, 230.30375586854467, 67.0, 22.0 ],
+									"text" : "param sw7"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-21",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 307.515706806282765, 206.586463223787234, 67.0, 22.0 ],
+									"text" : "param sw6"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-22",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 291.74083769633512, 182.86917057902977, 67.0, 22.0 ],
+									"text" : "param sw5"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-18",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 277.33769633507859, 159.151877934272306, 67.0, 22.0 ],
+									"text" : "param sw4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-19",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 264.30628272251306, 135.434585289514871, 67.0, 22.0 ],
+									"text" : "param sw3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-15",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 458.140522875816941, 210.0, 176.0, 22.0 ],
+									"text" : "param knob6 @min -1 @max 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-16",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 441.166666666666742, 185.600000000000023, 79.0, 22.0 ],
+									"text" : "param knob5"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-8",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 427.807189542483684, 161.200000000000017, 79.0, 22.0 ],
+									"text" : "param knob4"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-9",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 412.833333333333258, 136.800000000000011, 79.0, 22.0 ],
+									"text" : "param knob3"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-6",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 248.531413612565416, 111.717292644757435, 67.0, 22.0 ],
+									"text" : "param sw2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-7",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 235.5, 88.0, 67.0, 22.0 ],
+									"text" : "param sw1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-39",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 1000.5, 88.0, 107.0, 22.0 ],
+									"text" : "oopsy.suggestions"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-38",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 18.5, 342.0, 69.0, 20.0 ],
+									"text" : "OUTPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-37",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 18.5, 88.0, 69.0, 20.0 ],
+									"text" : "INPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-17",
+									"linecount" : 2,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 235.5, 40.0, 319.0, 33.0 ],
+									"text" : "Knob and switch inputs will be mapped to the @min..@max range. @min @max are 0 and 1 by default."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-14",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 396.473856209150313, 112.400000000000006, 79.0, 22.0 ],
+									"text" : "param knob2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-2",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 381.5, 88.0, 79.0, 22.0 ],
+									"text" : "param knob1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-11",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 126.5, 53.0, 69.0, 20.0 ],
+									"text" : "Audio IOs"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-3",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 167.5, 88.0, 28.0, 22.0 ],
+									"text" : "in 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-5",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 167.5, 342.0, 35.0, 22.0 ],
+									"text" : "out 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-1",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 126.5, 88.0, 28.0, 22.0 ],
+									"text" : "in 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-4",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 126.5, 342.0, 35.0, 22.0 ],
+									"text" : "out 1"
+								}
+
+							}
+ ],
+						"lines" : [ 							{
+								"patchline" : 								{
+									"destination" : [ "obj-4", 0 ],
+									"source" : [ "obj-1", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-4", 0 ],
+									"order" : 1,
+									"source" : [ "obj-10", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-5", 0 ],
+									"order" : 0,
+									"source" : [ "obj-10", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-13", 0 ],
+									"source" : [ "obj-12", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-10", 0 ],
+									"source" : [ "obj-13", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-26", 0 ],
+									"source" : [ "obj-15", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-27", 0 ],
+									"source" : [ "obj-16", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-10", 1 ],
+									"source" : [ "obj-2", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-13", 1 ],
+									"source" : [ "obj-22", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-25", 0 ],
+									"source" : [ "obj-28", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-5", 0 ],
+									"source" : [ "obj-3", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-25", 0 ],
+									"source" : [ "obj-6", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-24", 0 ],
+									"source" : [ "obj-7", 0 ]
+								}
+
+							}
+ ]
+					}
+,
+					"patching_rect" : [ 17.333333333333343, 222.0, 71.5, 35.0 ],
+					"saved_object_attributes" : 					{
+						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/templates/",
+						"exportname" : "oopsy_petal"
+					}
+,
+					"text" : "gen~",
+					"varname" : "oopsy_petal"
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 1 ],
+					"source" : [ "obj-11", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 0 ],
+					"source" : [ "obj-11", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-16", 2 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 0 ],
+					"source" : [ "obj-16", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-12", 0 ],
+					"source" : [ "obj-16", 5 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-14", 0 ],
+					"source" : [ "obj-16", 4 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-3", 0 ],
+					"source" : [ "obj-16", 3 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-16", 0 ],
+					"source" : [ "obj-2", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-16", 0 ],
+					"source" : [ "obj-4", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-16", 0 ],
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-16", 0 ],
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-16", 0 ],
+					"source" : [ "obj-7", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-16", 0 ],
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+ ],
+		"parameters" : 		{
+			"obj-11" : [ "live.gain~", "live.gain~", 0 ],
+			"obj-7::obj-21::obj-6" : [ "live.tab[3]", "live.tab[1]", 0 ],
+			"obj-7::obj-35" : [ "[5]", "Level", 0 ],
+			"obj-9::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
+			"parameterbanks" : 			{
+
+			}
+,
+			"inherited_shortname" : 1
+		}
+,
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.suggestions.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.gate.min.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.ctrl.smooth3.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.ctrl.smooth2.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.maxpat",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
+				"patcherrelativepath" : "../patchers",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "demosound.maxpat",
+				"bootpath" : "C74:/help/msp",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "sine.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "saw.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "square.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "random.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "interfacecolor.js",
+				"bootpath" : "C74:/interfaces",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+ ],
+		"autosave" : 0
+	}
+
+}
diff --git a/templates/oopsy_pod.maxpat b/templates/oopsy_pod.maxpat
new file mode 100644
index 0000000..dd07a4d
--- /dev/null
+++ b/templates/oopsy_pod.maxpat
@@ -0,0 +1,790 @@
+{
+	"patcher" : 	{
+		"fileversion" : 1,
+		"appversion" : 		{
+			"major" : 8,
+			"minor" : 1,
+			"revision" : 8,
+			"architecture" : "x64",
+			"modernui" : 1
+		}
+,
+		"classnamespace" : "box",
+		"rect" : [ 692.0, 240.0, 640.0, 480.0 ],
+		"bglocked" : 0,
+		"openinpresentation" : 0,
+		"default_fontsize" : 12.0,
+		"default_fontface" : 0,
+		"default_fontname" : "Arial",
+		"gridonopen" : 1,
+		"gridsize" : [ 15.0, 15.0 ],
+		"gridsnaponopen" : 1,
+		"objectsnaponopen" : 1,
+		"statusbarvisible" : 2,
+		"toolbarvisible" : 1,
+		"lefttoolbarpinned" : 0,
+		"toptoolbarpinned" : 0,
+		"righttoolbarpinned" : 0,
+		"bottomtoolbarpinned" : 0,
+		"toolbars_unpinned_last_save" : 0,
+		"tallnewobj" : 0,
+		"boxanimatetime" : 200,
+		"enablehscroll" : 1,
+		"enablevscroll" : 1,
+		"devicewidth" : 0.0,
+		"description" : "",
+		"digest" : "",
+		"tags" : "",
+		"style" : "",
+		"subpatcher_template" : "",
+		"assistshowspatchername" : 0,
+		"boxes" : [ 			{
+				"box" : 				{
+					"id" : "obj-1",
+					"maxclass" : "newobj",
+					"numinlets" : 3,
+					"numoutlets" : 4,
+					"outlettype" : [ "signal", "signal", "signal", "signal" ],
+					"patcher" : 					{
+						"fileversion" : 1,
+						"appversion" : 						{
+							"major" : 8,
+							"minor" : 1,
+							"revision" : 8,
+							"architecture" : "x64",
+							"modernui" : 1
+						}
+,
+						"classnamespace" : "dsp.gen",
+						"rect" : [ 84.0, 103.0, 964.0, 458.0 ],
+						"bglocked" : 0,
+						"openinpresentation" : 0,
+						"default_fontsize" : 12.0,
+						"default_fontface" : 0,
+						"default_fontname" : "Arial",
+						"gridonopen" : 1,
+						"gridsize" : [ 15.0, 15.0 ],
+						"gridsnaponopen" : 1,
+						"objectsnaponopen" : 1,
+						"statusbarvisible" : 2,
+						"toolbarvisible" : 1,
+						"lefttoolbarpinned" : 0,
+						"toptoolbarpinned" : 0,
+						"righttoolbarpinned" : 0,
+						"bottomtoolbarpinned" : 0,
+						"toolbars_unpinned_last_save" : 0,
+						"tallnewobj" : 0,
+						"boxanimatetime" : 200,
+						"enablehscroll" : 1,
+						"enablevscroll" : 1,
+						"devicewidth" : 0.0,
+						"description" : "",
+						"digest" : "",
+						"tags" : "",
+						"style" : "",
+						"subpatcher_template" : "",
+						"assistshowspatchername" : 0,
+						"boxes" : [ 							{
+								"box" : 								{
+									"id" : "obj-21",
+									"maxclass" : "newobj",
+									"numinlets" : 2,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 284.5, 315.0, 29.5, 22.0 ],
+									"text" : "*"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-20",
+									"linecount" : 3,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 225.5, 378.0, 186.0, 47.0 ],
+									"presentation_linecount" : 6,
+									"text" : "LED outputs range -1 to 1; where output will be green when positive and red when negative"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-16",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 2,
+									"outlettype" : [ "", "" ],
+									"patching_rect" : [ 225.5, 284.0, 36.0, 22.0 ],
+									"text" : "cycle"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-15",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 289.0, 350.0, 61.0, 22.0 ],
+									"text" : "out 4 led2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-13",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 225.5, 350.0, 61.0, 22.0 ],
+									"text" : "out 3 led1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-10",
+									"linecount" : 4,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 492.5, 157.0, 108.0, 60.0 ],
+									"text" : "Pod encoder will be +1, -1 or 0;\nencoder press will be 0 or 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-8",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 472.5, 120.0, 75.0, 22.0 ],
+									"text" : "param press"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-9",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 453.5, 96.0, 89.0, 22.0 ],
+									"text" : "param encoder"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-6",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 284.5, 172.0, 164.0, 22.0 ],
+									"text" : "param sw2 @min -1 @max 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-7",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 265.5, 148.0, 67.0, 22.0 ],
+									"text" : "param sw1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-39",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 794.5, 96.0, 107.0, 22.0 ],
+									"text" : "oopsy.suggestions"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-38",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 9.5, 350.0, 69.0, 20.0 ],
+									"text" : "OUTPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-37",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 9.5, 96.0, 69.0, 20.0 ],
+									"text" : "INPUTS"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-36",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 631.0, 62.5, 139.0, 20.0 ],
+									"text" : "MIDI:"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-19",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 631.0, 96.0, 53.0, 22.0 ],
+									"text" : "in 3 midi"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-30",
+									"linecount" : 7,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 651.0, 157.0, 139.0, 100.0 ],
+									"text" : "\"midi\" input/output is converted to/from normalized byte streams. See the MIDI examples more info on how to read and write these. "
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-17",
+									"linecount" : 6,
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 313.5, 211.400900900363922, 122.0, 87.0 ],
+									"text" : "Knob and switch inputs will be mapped to the @min..@max range. @min @max are 0 and 1 by default."
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-14",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 244.5, 120.0, 176.0, 22.0 ],
+									"text" : "param knob2 @min -1 @max 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-2",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 225.5, 96.0, 127.0, 22.0 ],
+									"text" : "param knob1 @max 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-12",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 225.5, 61.0, 57.0, 20.0 ],
+									"text" : "Knobs"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-11",
+									"maxclass" : "comment",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 117.5, 61.0, 69.0, 20.0 ],
+									"text" : "Audio IOs"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-3",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 158.5, 96.0, 28.0, 22.0 ],
+									"text" : "in 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-5",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 158.5, 350.0, 35.0, 22.0 ],
+									"text" : "out 2"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-1",
+									"maxclass" : "newobj",
+									"numinlets" : 0,
+									"numoutlets" : 1,
+									"outlettype" : [ "" ],
+									"patching_rect" : [ 117.5, 96.0, 28.0, 22.0 ],
+									"text" : "in 1"
+								}
+
+							}
+, 							{
+								"box" : 								{
+									"id" : "obj-4",
+									"maxclass" : "newobj",
+									"numinlets" : 1,
+									"numoutlets" : 0,
+									"patching_rect" : [ 117.5, 350.0, 35.0, 22.0 ],
+									"text" : "out 1"
+								}
+
+							}
+ ],
+						"lines" : [ 							{
+								"patchline" : 								{
+									"destination" : [ "obj-4", 0 ],
+									"source" : [ "obj-1", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-21", 1 ],
+									"source" : [ "obj-14", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-13", 0 ],
+									"order" : 1,
+									"source" : [ "obj-16", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-21", 0 ],
+									"order" : 0,
+									"source" : [ "obj-16", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-16", 0 ],
+									"source" : [ "obj-2", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-15", 0 ],
+									"source" : [ "obj-21", 0 ]
+								}
+
+							}
+, 							{
+								"patchline" : 								{
+									"destination" : [ "obj-5", 0 ],
+									"source" : [ "obj-3", 0 ]
+								}
+
+							}
+ ]
+					}
+,
+					"patching_rect" : [ 18.0, 267.0, 137.0, 22.0 ],
+					"saved_object_attributes" : 					{
+						"exportfolder" : "Macintosh HD:/Users/grrrwaaa/Documents/Max 8/Packages/oopsy/templates/",
+						"exportname" : "oopsy_pod"
+					}
+,
+					"text" : "gen~",
+					"varname" : "oopsy_pod"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-13",
+					"maxclass" : "ezdac~",
+					"numinlets" : 2,
+					"numoutlets" : 0,
+					"patching_rect" : [ 18.0, 429.0, 45.0, 45.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"id" : "obj-11",
+					"lastchannelcount" : 0,
+					"maxclass" : "live.gain~",
+					"numinlets" : 2,
+					"numoutlets" : 5,
+					"outlettype" : [ "signal", "signal", "", "float", "list" ],
+					"parameter_enable" : 1,
+					"patching_rect" : [ 18.0, 323.0, 44.0, 90.0 ],
+					"saved_attribute_attributes" : 					{
+						"valueof" : 						{
+							"parameter_longname" : "live.gain~",
+							"parameter_mmax" : 6.0,
+							"parameter_mmin" : -70.0,
+							"parameter_shortname" : "live.gain~",
+							"parameter_type" : 0,
+							"parameter_unitstyle" : 4
+						}
+
+					}
+,
+					"varname" : "live.gain~"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "press",
+					"displaymode" : 8,
+					"id" : "obj-10",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 263.0, 215.714285714285666, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "@loop", 1, "@file", "jongly.aif" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-7",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "demosound.maxpat",
+					"numinlets" : 0,
+					"numoutlets" : 1,
+					"offset" : [ 0.0, 0.0 ],
+					"outlettype" : [ "signal" ],
+					"patching_rect" : [ 18.0, 101.0, 225.0, 105.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "knob1",
+					"id" : "obj-2",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 263.0, 101.0, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "knob2",
+					"id" : "obj-4",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 263.0, 123.942857142857122, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "sw1",
+					"id" : "obj-5",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 263.0, 146.885714285714272, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "sw2",
+					"id" : "obj-6",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 263.0, 169.828571428571394, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"attr" : "encoder",
+					"displaymode" : 1,
+					"id" : "obj-8",
+					"maxclass" : "attrui",
+					"numinlets" : 1,
+					"numoutlets" : 1,
+					"outlettype" : [ "" ],
+					"patching_rect" : [ 263.0, 192.771428571428544, 150.0, 22.0 ]
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"fontname" : "Arial Italic",
+					"fontsize" : 18.0,
+					"id" : "obj-24",
+					"maxclass" : "comment",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"patching_rect" : [ 18.0, 25.0, 221.0, 27.0 ],
+					"text" : "Template for DaisyPod"
+				}
+
+			}
+, 			{
+				"box" : 				{
+					"args" : [ "@target", "pod" ],
+					"bgmode" : 0,
+					"border" : 0,
+					"clickthrough" : 0,
+					"enablehscroll" : 0,
+					"enablevscroll" : 0,
+					"id" : "obj-9",
+					"lockeddragscroll" : 0,
+					"maxclass" : "bpatcher",
+					"name" : "oopsy.maxpat",
+					"numinlets" : 1,
+					"numoutlets" : 0,
+					"offset" : [ 0.0, 0.0 ],
+					"patching_rect" : [ 457.5, 101.0, 128.0, 128.0 ],
+					"viewvisibility" : 1
+				}
+
+			}
+ ],
+		"lines" : [ 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 1 ],
+					"source" : [ "obj-1", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-11", 0 ],
+					"source" : [ "obj-1", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-10", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 1 ],
+					"source" : [ "obj-11", 1 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-13", 0 ],
+					"source" : [ "obj-11", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-2", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-4", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-5", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-6", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-7", 0 ]
+				}
+
+			}
+, 			{
+				"patchline" : 				{
+					"destination" : [ "obj-1", 0 ],
+					"source" : [ "obj-8", 0 ]
+				}
+
+			}
+ ],
+		"parameters" : 		{
+			"obj-11" : [ "live.gain~", "live.gain~", 0 ],
+			"obj-7::obj-21::obj-6" : [ "live.tab[3]", "live.tab[1]", 0 ],
+			"obj-7::obj-35" : [ "[5]", "Level", 0 ],
+			"obj-9::obj-32" : [ "live.text[2]", "FILTER", 0 ],
+			"obj-9::obj-36" : [ "live.menu[1]", "live.menu", 0 ],
+			"parameterbanks" : 			{
+
+			}
+,
+			"inherited_shortname" : 1
+		}
+,
+		"dependency_cache" : [ 			{
+				"name" : "oopsy.maxpat",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/patchers",
+				"patcherrelativepath" : "../patchers",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.snoop.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.node4max.js",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/javascript",
+				"patcherrelativepath" : "../javascript",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "demosound.maxpat",
+				"bootpath" : "C74:/help/msp",
+				"type" : "JSON",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "sine.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "saw.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "square.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "random.svg",
+				"bootpath" : "C74:/media/max/picts/m4l-picts",
+				"type" : "svg",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "interfacecolor.js",
+				"bootpath" : "C74:/interfaces",
+				"type" : "TEXT",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.suggestions.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.gate.min.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.ctrl.smooth3.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+, 			{
+				"name" : "oopsy.ctrl.smooth2.gendsp",
+				"bootpath" : "~/Documents/Max 8/Packages/oopsy/code",
+				"patcherrelativepath" : "../code",
+				"type" : "gDSP",
+				"implicit" : 1
+			}
+ ],
+		"autosave" : 0
+	}
+
+}