ST Link Setup

Jump to bottom Edit New page

Eric Helgeson edited this page Apr 23, 2022 · 3 revisions

STLinkV2 Setup

Be sure to buy the "Clone" STLink V2 programmer - the official STLink programmer does not work.

160190399-a3275132-822e-42ad-894b-af20bde0e57f

Make sure the STLinkV2 is up to date - Latest Firmware

Connect pins SWDIO, GND, SWCLK, and 3.3v from the programmer to the Blue Pill.

NOTE: These are not the same as Serial ports.

Important

If you are looking for BlueSCSI v2 documentation please go here: https://github.com/BlueSCSI/BlueSCSI-v2/wiki