Upload fails after MacOS Tahoe Update (arduino ide) #11849
Description
Board
ESP32-Wroom
Device Description
ESP32 Wroom relay board
Hardware Configuration
Version
latest stable Release (if not listed below)
Type
Task
IDE Name
Arduino
Operating System
MacOs 26.0
Flash frequency
40
PSRAM enabled
yes
Upload speed
115200
Description
esptool v5.1.0
Serial port /dev/cu.usbserial-110:
Connecting....Traceback (most recent call last):
File "esptool/init.py", line 1173, in _main
File "esptool/init.py", line 1032, in main
File "esptool/cli_util.py", line 229, in call
File "rich_click/rich_command.py", line 404, in call
File "click/core.py", line 1442, in call
File "rich_click/rich_command.py", line 187, in main
File "click/core.py", line 1830, in invoke
File "click/core.py", line 1226, in invoke
File "click/core.py", line 794, in invoke
File "click/decorators.py", line 34, in new_func
File "esptool/init.py", line 688, in write_flash_cli
File "esptool/cmds.py", line 1112, in attach_flash
File "esptool/loader.py", line 1091, in flash_id
File "esptool/loader.py", line 1653, in run_spiflash_command
File "esptool/loader.py", line 901, in read_reg
File "esptool/loader.py", line 565, in check_command
File "esptool/loader.py", line 495, in command
File "esptool/loader.py", line 431, in read
StopIteration
Sketch
-Debug Message
esptool v5.1.0
Serial port /dev/cu.usbserial-110:
Connecting....Traceback (most recent call last):
File "esptool/__init__.py", line 1173, in _main
File "esptool/__init__.py", line 1032, in main
File "esptool/cli_util.py", line 229, in __call__
File "rich_click/rich_command.py", line 404, in __call__
File "click/core.py", line 1442, in __call__
File "rich_click/rich_command.py", line 187, in main
File "click/core.py", line 1830, in invoke
File "click/core.py", line 1226, in invoke
File "click/core.py", line 794, in invoke
File "click/decorators.py", line 34, in new_func
File "esptool/__init__.py", line 688, in write_flash_cli
File "esptool/cmds.py", line 1112, in attach_flash
File "esptool/loader.py", line 1091, in flash_id
File "esptool/loader.py", line 1653, in run_spiflash_command
File "esptool/loader.py", line 901, in read_reg
File "esptool/loader.py", line 565, in check_command
File "esptool/loader.py", line 495, in command
File "esptool/loader.py", line 431, in read
StopIteration
Other Steps to Reproduce
No response
I have checked existing issues, online documentation and the Troubleshooting Guide
- I confirm I have checked existing issues, online documentation and Troubleshooting guide.