[feature_request] Expose EVCC controls to HA

[andreas-bulling]

I have successfully configured EVCC in my HA installation, everything works perfectly.

The only thing that is a bit annoying: I have to manually enable the charging by clicking on "fast charging" in the EVCC web interface. I don't seem to find a way to automate this as the EVCC integration doesn't expose any of the controls to HA. Would be great if that was possible.

[Skeeve245]

This is exactly the same request I have right now 😄

[andreas-bulling]

One can enable MQTT in EVCC, of course, and then create custom sensors, e.g.

mqtt:
  sensor:
    - name: Vehicle Charge Power
      icon: mdi:ev-station
      state_topic: "evcc/loadpoints/1/chargePower"
      unit_of_measurement: W

But this is super tedious as there are a large number of MQTT values...

[Skeeve245]

This is exactly what I did and what worked for me!

[andreas-bulling]

It does of course - but it is tedious. Would be nicer if all values would be exposed "by default"/automatically

[Skeeve245]

To create not only a sensor but also a switch you need the following code:
`mqtt:
sensor:
- name: Vehicle Charge Power
icon: mdi:ev-station
state_topic: "evcc/loadpoints/1/chargePower"
unit_of_measurement: W

- name: Lade IONIQ mit voller Leistung
  icon: mdi:ev-station
  state_topic: "evcc/loadpoints/1/mode"

switch:
- name: "Lademodus IONIQ"
command_topic: "evcc/loadpoints/1/mode/set"
state_topic: "evcc/loadpoints/1/mode"
payload_off: "pv"
payload_on: "now"`

[andreas-bulling]

Do you also have to start charging through the app or does the car start charging immediately once you activate fast charge in evcc?

[Skeeve245]

Hi Andreas, depends on your configuration of hardware (car, wallbox and possible energy manager) and software EVCC and Home Assistant and the parameters of all ....
Yesterday evening I used above described switch to switch to full load if connected and then connected my car this morning. I was expecting that the car would start immediately because of the switch. Nothing happend ...
Unfortunatley I installed the update of Home Assistant before this which restarted the Home Assistant and with this EVCC. And after restart EVCC goes to PV mode ...
So maybe its working maybe not, I am too lazy to go out and try it again, car is happy charging now :-D

[Skeeve245]

Okay it was not the restart of EVCC but that I set the mode in EVCC.yaml. Commented it out and will see whether the choosen mode will stay ...

[Skeeve245]

The mode stayed, so everything is as I want it :-D

[hzpz]

This was requested on the main project as well: evcc-io/evcc#11256

[thecem]

Maybe someone request a change to the docu, that other users find this Information as well and helpful?