In addition to Wormhole itself, you need to run your own verifying node for every chain that Wormhole connects to except for newer IBC connected chains that integrate through Wormhole Gateway. Please refer to the constants reference for all chains that Wormhole connects to.
Do NOT use third-party RPC service providers for any of the chains! You'd fully trust them, and they could lie to you on whether an event has actually been observed. The whole point of Wormhole is not to rely on centralized nodes!
We strongly recommend running your own full nodes for both testnet and mainnet (where applicable) so you can test changes for your mainnet full nodes and gain operational experience.
Refer to the Solana documentation on how to run an RPC (full) node. Solana's Discord server is a great resource for questions regarding operations.
The #rpc-server-operators channel is especially useful for setting up Solana RPC nodes.
Your Solana RPC node needs the following parameters enabled:
--enable-rpc-transaction-history
--enable-cpi-and-log-storage
--enable-rpc-transaction-history enables historic transactions to be retrieved via the getConfirmedBlock API,
which is required for Wormhole to find transactions.
--enable-cpi-and-log-storage stores metadata about CPI calls.
Be aware that these require extra disk space!
If you use the same RPC node for Wormhole v1, you also need the following additional parameters to speed up
getProgramAccount queries:
[... see above for other required parameters ...]
--account-index program-id
--account-index-include-key WormT3McKhFJ2RkiGpdw9GKvNCrB2aB54gb2uV9MfQC # for mainnet
--account-index-include-key 5gQf5AUhAgWYgUCt9ouShm9H7dzzXUsLdssYwe5krKhg # for testnet
Alternatively, if you want to run a general-purpose RPC node with indexes for all programs instead of only Wormhole, leave out the filtering:
--account-index program-id
On mainnet, we strongly recommend blacklisting KIN and the token program to speed up catchup:
--account-index-exclude-key kinXdEcpDQeHPEuQnqmUgtYykqKGVFq6CeVX5iAHJq6 # Mainnet only
--account-index-exclude-key TokenkegQfeZyiNwAJbNbGKPFXCWuBvf9Ss623VQ5DA # Mainnet only
Note that these indexes require extra disk space and may slow down catchup. The first startup after adding these parameters will be slow since Solana needs to recreate all indexes.
In order to observe events on the Ethereum chain, you need access to an Ethereum RPC endpoint. The most common choice is geth, but for the sake of diversity, you may want to run something that isn't geth.
With RPC providers such as Alchemy, Infura, etc. you trust those operators to provide you with untampered chain data and have no way of verifying correctness. Therefore, Wormhole requires either an Ethereum full-node or a light-client. The node can be operated in the full, quick or light modes with no impact on security or performance of the bridge software. As long as the node supports the Ethereum JSON RPC API, it will be compatible with the bridge so all major implementations will work fine.
Generally, full-nodes will work better and be more reliable than light clients which are susceptible to DoS attacks since only very few nodes support the light client protocol.
Running a full node typically requires ~500G of SSD storage, 8G of RAM and 4-8 CPU threads (depending on clock frequency). Light clients have much lower hardware requirements.
Terra is also sometimes referred to as Terra 2, but the correct name is just simply "Terra". The previous version was renamed to "Terra Classic".
Refer to the Terra documentation on how to run a full node.
Refer to the Terra Classic documentation on how to run a full node.
All guardians must run validators for wormchain, the codename of Wormhole Gateway.
The ``--wormchainURLargument to the guardian node should point to:9090` which is the `grpc` port
in the app.toml.
Example port setup:
config.toml:
[rpc]
laddr = "tcp://0.0.0.0:26657"
grpc_laddr = ""
pprof_laddr = "localhost:6060"
[p2p]
laddr = "tcp://0.0.0.0:26656"
external_address = ""app.toml:
[grpc]
address = "0.0.0.0:9090"
[grpc-web]
address = "0.0.0.0:9091"For signing, consider setting up a remote threshold signer such as horcrux and adopting the sentry node architecture with sentry nodes in front of your wormchain validator.
Check the latest guardian set:
$ wormchaind query wormhole latest-guardian-set-index
latestGuardianSetIndex: 4Upgrade the guardian set (with a valid governance vaa):
wormchaind tx wormhole execute-governance-vaa <guardian_set_upgrade_VAA_in_hex_format>View Validator information:
$ wormchaind q staking validators
... snip ...
- commission:
commission_rates:
max_change_rate: "0.020000000000000000"
max_rate: "0.200000000000000000"
rate: "0.000000000000000000"
update_time: "2024-04-16T19:13:45.210176030Z"
consensus_pubkey:
'@type': /cosmos.crypto.ed25519.PubKey
key: T+hsVX52EarrsL+mOwv3mL0byWa2EctsG6XmikUMFiQ=
delegator_shares: "0.000000000000000000"
description:
details: ""
identity: 11A4103C4BCBD2B4
moniker: RockawayX
security_contact: ""
website: https://rockawayx.com/infrastructure
jailed: false
min_self_delegation: "0"
operator_address: wormholevaloper1thl5syhmscgnj7whdyrydw3w6vy80044278fxp
status: BOND_STATUS_BONDED
tokens: "0"
unbonding_height: "0"
unbonding_time: "1970-01-01T00:00:00Z"Some non-Ethereum EVM compatible blockchains need to run in archive mode for Queries to function correctly. By default in geth, historical state is only kept in memory for the previous 128 blocks. After 128 blocks, older states are garbage collected. Many of these chains are forks of geth that maintain this historical limitation.
- Arbitrum
- Base
- Optimism
Newer execution clients such as reth lack this limitation and are worth investigating once they are stable.
Additionally, if there is ever a scenario where the network fails to come to consensus on an EVM compatible chain due to a hard fork or some unforeseen scenario, it might be required to run archive nodes for those chains temporarily to ensure the transactions can be reobserved.
All modern Cosmos integrations happen by Wormhole observing IBC transactions on Gateway (wormchain). Guardian node operators do not need to run full nodes for these networks. For Cosmos based chains that were added before this functionality, a full node is still necessary.
The following Cosmos based nodes were added prior to Gateway and guardians need to run full nodes:
- Injective
- Terra
- Terra Classic
- XPLA
NOTE: All guardians must run validators for wormchain.
For security reasons, we do not provide a pre-built binary. You need to check out the repo and build the guardiand binary from source. A Git repo is much harder to tamper with than release binaries.
To build the Wormhole node, you need Go >= 1.21.9
First, check out the version of the Wormhole repo that you want to deploy:
git clone https://github.com/wormhole-foundation/wormhole && cd wormholeThen, compile the release binary as an unprivileged build user:
make nodeYou'll end up with a guardiand binary in build/.
Consider these recommendations, not a tutorial to be followed blindly. You'll want to integrate this with your existing build pipeline. If you need Dockerfile examples, you can take a look at our devnet deployment.
If you want to compile and deploy locally, you can run sudo make install to install the binary to /usr/local/bin.
If you deploy using a custom pipeline, you need to set the CAP_IPC_LOCK capability on the binary (e.g. doing the
equivalent to sudo setcap cap_ipc_lock=+ep) to allow it to lock its memory pages to prevent them from being paged out.
See below on why - this is a generic defense-in-depth mitigation which ensures that process memory is never swapped out
to disk. Please create a GitHub issue if this extra capability represents an operational or compliance concern.
To generate a guardian key, install guardiand first. If you generate the key on a separate machine, you may want to compile guardiand only without installing it:
make node
sudo setcap cap_ipc_lock=+ep ./build/bin/guardiand
Otherwise, use the same guardiand binary that you compiled using the regular instructions above.
Generate a new key using the keygen subcommand:
guardiand keygen --desc "Testnet key foo" /path/to/your.key
The key file includes a human-readable part which includes the public key hashes and the description.
We strongly recommend a separate user and systemd services for the Wormhole services.
See the separate wormhole-networks repository for examples on how to set up the guardiand unit for a specific network.
You need to open port 8999/udp in your firewall for the P2P network and 8996/udp for Cross Chain Queries. Nothing else has to be exposed externally if you do not run a public RPC.
journalctl can show guardiand's colored output using the -a flag for binary output, i.e.: journalctl -a -f -u guardiand.
Kubernetes deployment is fully supported.
Refer to devnet/ for example k8s deployments as a starting point for your own production deployment. You'll have to build your own containers. Unless you already run Kubernetes in production, we strongly recommend a traditional deployment on a dedicated instance - it's easier to understand and troubleshoot.
When running in kubernetes, or behind any kind of NAT, pass --gossipAdvertiseAddress=external.ip.address to the
guardiand node process to ensure the external address is advertized in p2p. If this is not done, reobservation
requests and CCQ will not function as intended.
Wormhole exposes a status server for readiness and metrics. By default, it listens on port 6060 on localhost.
You can use a command line argument to expose it publicly: --statusAddr=[::]:6060.
NOTE: Parsing the log output for monitoring is NOT recommended. Log output is meant for human consumption and is not considered a stable API. Log messages may be added, modified or removed without notice. Use the metrics :-)
This endpoint returns a 200 OK status code once the Wormhole node is ready to serve requests. A node is considered ready as soon as it has successfully connected to all chains and started processing requests.
This is only for startup signaling - it will not tell whether it stopped processing requests at some later point. Once it's true, it stays true! Use metrics to figure that out.
This endpoint serves Prometheus metrics for alerting and introspection. We recommend using Prometheus and Alertmanager, but any monitoring tool that can ingest metrics using the standardized Prometheus exposition format will work.
Once we gained more operational experience with Wormhole, specific recommendations on appropriate symptoms-based alerting will be documented here.
See Wormhole.json for an example Grafana dashboard.
There is a dashboard which shows the overall health of the network and has metrics on individual guardians.
NOTE: Parsing the log output for monitoring is NOT recommended. Log output is meant for human consumption and is not considered a stable API. Log messages may be added, modified or removed without notice. Use the metrics :-)
In the wormhole-dashboard repository, there is a small healthcheck application which verifies that the guardian is gossiping out heartbeats, is submitting chain observations, and has a working heartbeats API available. This is a very good way to verify a specific guardian is functioning as intended.
You can clone the repo and run the check against the MCF Guardian:
git clone https://github.com/wormhole-foundation/wormhole-dashboard
cd wormhole-dashboard/fly/cmd/healthcheck
# Run the fly
$ go run main.go --pubKey 0xDA798F6896A3331F64b48c12D1D57Fd9cbe70811 --url https://wormhole-v2-mainnet-api.mcf.rocks
✅ guardian heartbeat received {12D3KooWDZVv7BhZ8yFLkarNdaSWaB43D6UbQwExJ8nnGAEmfHcU: [/ip4/185.188.42.109/udp/8999/quic-v1]}
✅ 44 observations received
✅ /v1/heartbeatsIf the guardian public RPC is not exposed, the --url flag can be omitted:
$ go run main.go --pubKey 0xDA798F6896A3331F64b48c12D1D57Fd9cbe70811
✅ guardian heartbeat received {12D3KooWDZVv7BhZ8yFLkarNdaSWaB43D6UbQwExJ8nnGAEmfHcU: [/ip4/185.188.42.109/udp/8999/quic-v1]}
✅ 41 observations received
ℹ️ --url not defined, skipping web checksThe bootstrap nodes and network defaults to mainnet and the values can be found in the network constants.
It can also be used to test a specific bootstrap node/s:
$ go run main.go --pubKey 0xDA798F6896A3331F64b48c12D1D57Fd9cbe70811 --bootstrap /dns4/wormhole.mcf.rocks/udp/8999/quic/p2p/12D3KooWDZVv7BhZ8yFLkarNdaSWaB43D6UbQwExJ8nnGAEmfHcU
✅ guardian heartbeat received {12D3KooWDZVv7BhZ8yFLkarNdaSWaB43D6UbQwExJ8nnGAEmfHcU: [/ip4/185.188.42.109/udp/8999/quic-v1]}
✅ 44 observations received
ℹ️ --url not defined, skipping web checksNTT is an exciting feature of wormhole that builds upon the core bridge to allow mint/burn style transfers. Ensuring it runs correctly requires integrating it with the NTT Accountant. To enable this feature, create a new wormchain key. Do not reuse an existing global accountant key and add the following parameters:
# You may already have these.
--wormchainURL URL_TO_YOUR_WORMCHAIN_NODE
--accountantWS HTTP_URL_OF_YOUR_WORMCHAIN_NODE
# This is the mainnet contract.
--accountantNttContract wormhole1mc23vtzxh46e63vq22e8cnv23an06akvkqws04kghkrxrauzpgwq2hmwm7
--accountantNttKeyPath PATH_TO_YOUR_NTT_ACCOUNTANT_KEY_FILE
--accountantNttKeyPassPhrase YOUR_NTT_ACCOUNTANT_KEY_PASS_PHRASEPlease remember to allowlist the new NTT Accountant key for use with Wormchain! For instructions on how to do that, speak with someone from the Wormhole Foundation.
CCQ also known as Wormhole Queries is a feature to allow pulling attestations in a cross chain manner. To run ccq, a few additional flags need to be enabled on the guardian node:
--ccqEnabled=true \
--ccqAllowedPeers="[ALLOWED,PEERS,GO,HERE]" \
--ccqAllowedRequesters="[ALLOWED,REQUESTORS,GO,HERE" \To test query functionality, follow the instructions in node/hack/query/ccqlistener/ccqlistener.go.
Wormhole v2 no longer uses Solana as a data availability layer (see design document). Instead, it relies on Guardian nodes exposing an API which web wallets and other clients can use to retrieve the signed VAA message for a given transaction.
Guardian nodes are strongly encouraged to expose a public API endpoint to improve the protocol's robustness.
guardiand comes with a built-in REST and grpc-web server which can be enabled using the --publicWeb flag:
--publicWeb=[::]:443
For usage with web wallets, TLS needs to be supported. guardiand has built-in Let's Encrypt support:
--tlsHostname=wormhole-v2-mainnet-api.example.com
--tlsProdEnv=true
Alternatively, you can use a managed reverse proxy like CloudFlare to terminate TLS.
It is safe to expose the publicWeb port on signing nodes. For better resiliency against denial of service attacks, future guardiand releases will include listen-only mode such that multiple guardiand instances without guardian keys can be operated behind a load balancer.
Optionally, the guardian can send telemetry to Grafana Cloud Logs aka "loki". To enable this functionality, add the following flag:
--telemetryLokiURL=$PER_GUARDIAN_LOKI_URL_WITH_TOKENNew guardians should talk to the Wormhole Foundation to get a Loki url.
If you want to bind --publicWeb to a port <1024, you need to assign the CAP_NET_BIND_SERVICE capability.
This can be accomplished by either adding the capability to the binary (like in non-systemd environments):
sudo setcap cap_net_bind_service=+ep guardiand
...or by extending the capability set in guardiand.service:
AmbientCapabilities=CAP_IPC_LOCK CAP_NET_BIND_SERVICE
CapabilityBoundingSet=CAP_IPC_LOCK CAP_NET_BIND_SERVICE
You'll have to manage the following keys:
-
The guardian key, which is the bridge consensus key. This key is very critical - your node uses it to certify VAA messages. The public key's hash is stored in the guardian set on all connected chains. It does not accrue rewards. It's your share of the multisig mechanism that protect the Wormhole network. The guardian set can be replaced if a majority of the guardians agree to sign and publish a new guardian set.
-
A node key, which identifies it on the gossip network, similar to Solana's node identity or a Tendermint node key. It is used by the peer-to-peer network for routing and transport layer encryption. An attacker could potentially use it to censor your messages on the network. Other than that, it's not very critical and can be rotated. The node will automatically create a node key at the path you specify if it doesn't exist. While the node key can be replaced, we recommend using a persistent node key. This will make it easier to identify your node in monitoring data and improves p2p connectivity.
For production, we strongly recommend to either encrypt your disks, and/or take care to never have hot guardian keys touch the disk. One way to accomplish is to store keys on an in-memory ramfs, which can't be swapped out, and restore it from cold storage or an HSM/vault whenever the node is rebooted. You might want to disable swap altogether. None of that is specific to Wormhole - this applies to any hot keys.
Our node software takes extra care to lock memory using mlock(2) to prevent keys from being swapped out to disk, which is why it requires extra capabilities. Yes, other chains might want to do this too :-)
Storing keys on an HSM or using remote signers only partially mitigates the risk of server compromise - it means the key can't get stolen, but an attacker could still cause the HSM to sign malicious payloads. Future iterations of Wormhole may include support for remote signing.
The list of supported bootstrap peers is defined in node/pkg/p2p/network_consts.go. That file also provides golang functions for obtaining the network parameters (network ID and bootstrap peers) based on the environment (mainnet or testnet).
The common Wormhole applications (guardiand, spy and query proxy server) use those functions, so it is not necessary to specify the actual bootstrap parameters in their configs. Developers of any new applications are strongly urged to do the same, and not proliferate lists of bootstrap peers which might change over time.
The spy connects to the wormhole guardian peer to peer network and listens for new VAAs. It publishes those via a socket and websocket that applications can subscribe to. If you want to run the spy built from source, change ghcr.io/wormhole-foundation/guardiand:latest to guardian after building the guardian image.
Start the spy against the testnet wormhole guardian:
docker run \
--pull=always \
--platform=linux/amd64 \
-p 7073:7073 \
--entrypoint /guardiand \
ghcr.io/wormhole-foundation/guardiand:latest \
spy --nodeKey /node.key --spyRPC "[::]:7073" --env testnetTo run the spy against mainnet:
docker run \
--pull=always \
--platform=linux/amd64 \
-p 7073:7073 \
--entrypoint /guardiand \
ghcr.io/wormhole-foundation/guardiand:latest \
spy --nodeKey /node.key --spyRPC "[::]:7073" --env mainnetConfiguration files, environment variables and flags are all supported.
Location/Naming: By default, the config file is expected to be in the node/config directory. The standard name for the config file is guardiand.yaml. Currently there's no support for custom directory or filename yet.
Format: We support any format that is supported by Viper. But YAML format is generally preferred.
Example:
ethRPC: "ws://eth-devnet:8545"
ethContract: "0xC89Ce4735882C9F0f0FE26686c53074E09B0D550"
solanaRPC: "http://solana-devnet:8899"
solanaContract: "Bridge1p5gheXUvJ6jGWGeCsgPKgnE3YgdGKRVCMY9o"Prefix: All environment variables related to the Guardian node should be prefixed with GUARDIAND_.
Usage: Environment variables can be used to override settings in the config file. Particularly for sensitive data like API keys that should not be stored in config files.
Example:
export GUARDIAND_ETHRPC=ws://eth-devnet:8545Usage: Flags provide the highest precedence and can be used for temporary overrides or for settings that change frequently.
Example:
./guardiand node --ethRPC=ws://eth-devnet:8545The configuration settings are applied in the following order of precedence:
- Command-Line Flags: Highest precedence, overrides any other settings.
- Environment Variables: Overrides the config file settings but can be overridden by flags.
- Config File: Lowest precedence.