diff --git a/Dockerfile.curio b/Dockerfile.curio
index 45183ad17d4..ee4ab2f42a9 100644
--- a/Dockerfile.curio
+++ b/Dockerfile.curio
@@ -33,8 +33,6 @@ RUN set -eux; \
 COPY ./ /opt/curio
 WORKDIR /opt/curio
 
-#RUN scripts/docker-git-state-check.sh
-
 ### make configurable filecoin-ffi build
 ARG FFI_BUILD_FROM_SOURCE=0
 ENV FFI_BUILD_FROM_SOURCE=${FFI_BUILD_FROM_SOURCE}
diff --git a/cmd/curio/deps/deps.go b/cmd/curio/deps/deps.go
index 2050a1cafba..df645684bc6 100644
--- a/cmd/curio/deps/deps.go
+++ b/cmd/curio/deps/deps.go
@@ -207,7 +207,7 @@ func (deps *Deps) PopulateRemainingDeps(ctx context.Context, cctx *cli.Context,
 		}
 	}
 
-	if deps.Cfg == nil {
+	if deps.DB == nil {
 		deps.DB, err = MakeDB(cctx)
 		if err != nil {
 			return err
diff --git a/cmd/curio/guidedsetup/guidedsetup.go b/cmd/curio/guidedsetup/guidedsetup.go
index 44bca3b17fd..af505966dee 100644
--- a/cmd/curio/guidedsetup/guidedsetup.go
+++ b/cmd/curio/guidedsetup/guidedsetup.go
@@ -250,7 +250,7 @@ func complete(d *MigrationData) {
 
 func completeInit(d *MigrationData) {
 	stepCompleted(d, d.T("New Miner initialization complete."))
-	d.say(plain, "Try the web interface with %s for further guided improvements.", "--layers=gui")
+	d.say(plain, "Try the web interface with %s for further guided improvements.", code.Render("curio run --layers=gui"))
 }
 
 func configToDB(d *MigrationData) {
diff --git a/cmd/curio/internal/translations/catalog.go b/cmd/curio/internal/translations/catalog.go
index 6e0ad30870d..42efc8fceec 100644
--- a/cmd/curio/internal/translations/catalog.go
+++ b/cmd/curio/internal/translations/catalog.go
@@ -40,168 +40,173 @@ func init() {
 }
 
 var messageKeyToIndex = map[string]int{
-	"Aborting migration.":       45,
+	"Aborting migration.":       21,
 	"Aborting remaining steps.": 9,
-	"Aggregate-Anonymous: version, chain, and Miner power (bucketed).": 22,
-	"Cannot reach the DB: %s": 90,
-	"Cannot read the config.toml file in the provided directory, Error: %s":                                                                                  65,
-	"Compare the configurations %s to %s. Changes between the miner IDs other than wallet addreses should be a new, minimal layer for runners that need it.": 116,
-	"Confidence epochs":     86,
-	"Confidence epochs: %d": 76,
-	"Configuration 'base' was created to resemble this lotus-miner's config.toml .":               117,
-	"Configuration 'base' was updated to include this miner's address":                            99,
-	"Configuration 'base' was updated to include this miner's address (%s) and its wallet setup.": 115,
-	"Connected to Yugabyte":                                                          59,
-	"Connected to Yugabyte. Schema is current.":                                      47,
-	"Continue to connect and update schema.":                                         109,
-	"Continue to verify the addresses and create a new miner actor.":                 77,
-	"Could not create repo from directory: %s. Aborting migration":                   66,
-	"Could not lock miner repo. Your miner must be stopped: %s\n Aborting migration": 67,
+	"Aggregate-Anonymous: version, chain, and Miner power (bucketed).": 26,
+	"Cannot reach the DB: %s": 93,
+	"Cannot read the config.toml file in the provided directory, Error: %s":                                                                                  68,
+	"Compare the configurations %s to %s. Changes between the miner IDs other than wallet addreses should be a new, minimal layer for runners that need it.": 120,
+	"Confidence epochs":     89,
+	"Confidence epochs: %d": 79,
+	"Configuration 'base' was created to resemble this lotus-miner's config.toml .":               121,
+	"Configuration 'base' was updated to include this miner's address":                            102,
+	"Configuration 'base' was updated to include this miner's address (%s) and its wallet setup.": 119,
+	"Connected to Yugabyte":                                                          62,
+	"Connected to Yugabyte. Schema is current.":                                      50,
+	"Continue to connect and update schema.":                                         112,
+	"Continue to verify the addresses and create a new miner actor.":                 80,
+	"Could not create repo from directory: %s. Aborting migration":                   69,
+	"Could not lock miner repo. Your miner must be stopped: %s\n Aborting migration": 70,
 	"Create a new miner":                                                             8,
 	"Ctrl+C pressed in Terminal":                                                     5,
-	"Database config error occurred, abandoning migration: %s ":                      110,
-	"Database: %s":    108,
-	"Documentation: ": 32,
+	"Database config error occurred, abandoning migration: %s ":                      113,
+	"Database: %s":    111,
+	"Documentation: ": 36,
 	"Each step needs your confirmation and can be reversed. Press Ctrl+C to exit at any time.": 4,
-	"Enabling Sector Indexing in the database.":                                                48,
-	"Enter %s address":                    82,
-	"Enter the Yugabyte database %s":      113,
-	"Enter the Yugabyte database host(s)": 111,
-	"Enter the info to connect to your Yugabyte database installation (https://download.yugabyte.com/)": 103,
-	"Enter the info to create a new miner":                     71,
-	"Enter the owner address":                                  79,
-	"Enter the path to the configuration directory used by %s": 63,
-	"Enter the sector size":                                    83,
-	"Error closing backup file: %s":                            56,
-	"Error connecting to Yugabyte database: %s":                114,
-	"Error connecting to full node API: %s":                    91,
-	"Error creating backup file: %s":                           53,
-	"Error encoding config.toml: %s":                           49,
-	"Error expanding path: %s":                                 51,
+	"Enabling Sector Indexing in the database.":                                                51,
+	"Enter %s address":                    85,
+	"Enter the Yugabyte database %s":      116,
+	"Enter the Yugabyte database host(s)": 114,
+	"Enter the info to connect to your Yugabyte database installation (https://download.yugabyte.com/)": 106,
+	"Enter the info to create a new miner":                     74,
+	"Enter the owner address":                                  82,
+	"Enter the path to the configuration directory used by %s": 66,
+	"Enter the sector size":                                    86,
+	"Error closing backup file: %s":                            59,
+	"Error connecting to Yugabyte database: %s":                117,
+	"Error connecting to full node API: %s":                    94,
+	"Error creating backup file: %s":                           56,
+	"Error encoding config.toml: %s":                           52,
+	"Error expanding path: %s":                                 54,
 	"Error getting API: %s":                                    15,
-	"Error getting miner info: %s":                             27,
-	"Error getting miner power: %s":                            25,
+	"Error getting miner info: %s":                             31,
+	"Error getting miner power: %s":                            29,
 	"Error getting token: %s":                                  17,
-	"Error interpreting miner ID: %s: ID: %s":                  40,
-	"Error marshalling message: %s":                            26,
-	"Error reading config.toml: %s":                            54,
-	"Error reading filemode of config.toml: %s":                52,
-	"Error saving config to layer: %s. Aborting Migration":     18,
-	"Error sending message: %s":                                29,
-	"Error sending message: Status %s, Message: ":              30,
-	"Error signing message: %s":                                28,
-	"Error verifying sectors: %s":                              41,
-	"Error writing backup file: %s":                            55,
-	"Error writing config.toml: %s":                            57,
-	"Failed to create the miner actor: %s":                     88,
-	"Failed to generate default config: %s":                    97,
-	"Failed to generate random bytes for secret: %s":           93,
-	"Failed to get API info for FullNode: %w":                  95,
-	"Failed to insert 'base' config layer in database: %s":     98,
-	"Failed to load base config from database: %s":             100,
-	"Failed to parse base config: %s":                          101,
-	"Failed to parse confidence: %s":                           87,
-	"Failed to parse sector size: %s":                          85,
-	"Failed to parse the address: %s":                          81,
-	"Failed to regenerate base config: %s":                     102,
-	"Failed to verify the auth token from daemon node: %s":     96,
-	"Filecoin %s channels: %s and %s":                          35,
-	"Hint: I am someone running Curio on whichever chain.":     23,
-	"Host: %s":   104,
+	"Error interpreting miner ID: %s: ID: %s":                  44,
+	"Error marshalling message: %s":                            30,
+	"Error reading config.toml: %s":                            57,
+	"Error reading filemode of config.toml: %s":                55,
+	"Error saving config to layer: %s. Aborting Migration":     22,
+	"Error sending message: %s":                                33,
+	"Error sending message: Status %s, Message: ":              34,
+	"Error signing message: %s":                                32,
+	"Error verifying sectors: %s":                              45,
+	"Error writing backup file: %s":                            58,
+	"Error writing config.toml: %s":                            60,
+	"Failed to create the miner actor: %s":                     91,
+	"Failed to generate default config: %s":                    100,
+	"Failed to generate random bytes for secret: %s":           96,
+	"Failed to get API info for FullNode: %w":                  98,
+	"Failed to insert 'base' config layer in database: %s":     101,
+	"Failed to load base config from database: %s":             103,
+	"Failed to parse base config: %s":                          104,
+	"Failed to parse confidence: %s":                           90,
+	"Failed to parse sector size: %s":                          88,
+	"Failed to parse the address: %s":                          84,
+	"Failed to regenerate base config: %s":                     105,
+	"Failed to verify the auth token from daemon node: %s":     99,
+	"Filecoin %s channels: %s and %s":                          39,
+	"Hint: I am someone running Curio on whichever chain.":     27,
+	"Host: %s":   107,
 	"I want to:": 6,
-	"Increase reliability using redundancy: start multiple machines with at-least the post layer: 'curio run --layers=post'": 36,
-	"Individual Data: Miner ID, Curio version, chain (%s or %s). Signed.":                                                    21,
-	"Initializing a new miner actor.":   70,
-	"Layer %s created. ":                118,
+	"Increase reliability using redundancy: start multiple machines with at-least the post layer: 'curio run --layers=post'": 40,
+	"Individual Data: Miner ID, Curio version, chain (%s or %s). Signed.":                                                    25,
+	"Initializing a new miner actor.":   73,
+	"Layer %s created. ":                122,
 	"Lotus-Miner to Curio Migration.":   10,
-	"Message sent.":                     31,
+	"Message sent.":                     35,
 	"Migrate from existing Lotus-Miner": 7,
 	"Migrating lotus-miner config.toml to Curio in-database configuration.": 14,
-	"Miner %s created successfully":                                         89,
-	"Miner creation error occurred: %s ":                                    78,
+	"Migrating metadata for %d sectors.":                                    118,
+	"Miner %s created successfully":                                         92,
+	"Miner creation error occurred: %s ":                                    81,
 	"New Miner initialization complete.":                                    13,
-	"No address provided":                                                   80,
-	"No host provided":                                                      112,
-	"No path provided, abandoning migration ":                               64,
-	"No value provided":                                                     84,
-	"Nothing.":                                                              24,
-	"Now shut down lotus-miner and lotus-worker and use run %s instead.":    43,
-	"One database can serve multiple miner IDs: Run a migration for each lotus-miner.": 37,
-	"Other":             62,
-	"Owner Address: %s": 72,
-	"Password: %s":      107,
-	"Please do not run guided-setup again as miner creation is not idempotent. You need to run 'curio config new-cluster %s' to finish the configuration": 94,
-	"Please start (or restart) %s now that database credentials are in %s.":                                                                               38,
-	"Port: %s":                          105,
-	"Pre-initialization steps complete": 92,
-	"Press return to continue":          44,
-	"Press return to update %s with Yugabyte info. A Backup file will be written to that folder before changes are made.": 50,
-	"Read Miner Config":                                         68,
-	"Restart Lotus Miner. ":                                     58,
-	"Sector Size: %d":                                           75,
-	"Sectors verified. %d sector locations found.":              46,
-	"Select the location of your lotus-miner config directory?": 61,
-	"Select what you want to share with the Curio team.":        20,
-	"Sender Address: %s":                                        74,
-	"Step Complete: %s\n":                                       69,
-	"The '%s' layer stores common configuration. All curio instances can include it in their %s argument.":                                                                                               33,
-	"The Curio team wants to improve the software you use. Tell the team you're using `%s`.":                                                                                                             19,
-	"The sectors are in the database. The database is ready for %s.":                                                                                                                                     42,
+	"No address provided":                                                   83,
+	"No host provided":                                                      115,
+	"No path provided, abandoning migration ":                               67,
+	"No value provided":                                                     87,
+	"No, abort":                                                             20,
+	"Nothing.":                                                              28,
+	"Now shut down lotus-miner and lotus-worker and use run %s instead.":               47,
+	"One database can serve multiple miner IDs: Run a migration for each lotus-miner.": 41,
+	"Other":             65,
+	"Owner Address: %s": 75,
+	"Password: %s":      110,
+	"Please do not run guided-setup again as miner creation is not idempotent. You need to run 'curio config new-cluster %s' to finish the configuration": 97,
+	"Please start (or restart) %s now that database credentials are in %s.":                                                                               42,
+	"Port: %s":                          108,
+	"Pre-initialization steps complete": 95,
+	"Press return to continue":          48,
+	"Press return to update %s with Yugabyte info. A Backup file will be written to that folder before changes are made.": 53,
+	"Read Miner Config":                                         71,
+	"Restart Lotus Miner. ":                                     61,
+	"Sector Size: %d":                                           78,
+	"Sectors verified. %d sector locations found.":              49,
+	"Select the location of your lotus-miner config directory?": 64,
+	"Select what you want to share with the Curio team.":        24,
+	"Sender Address: %s":                                        77,
+	"Step Complete: %s\n":                                       72,
+	"The '%s' layer stores common configuration. All curio instances can include it in their %s argument.":                                                                                               37,
+	"The Curio team wants to improve the software you use. Tell the team you're using `%s`.":                                                                                                             23,
+	"The sectors are in the database. The database is ready for %s.":                                                                                                                                     46,
 	"This interactive tool creates a new miner actor and creates the basic configuration layer for it.":                                                                                                  1,
 	"This interactive tool migrates lotus-miner to Curio in 5 minutes.":                                                                                                                                  3,
 	"This process is partially idempotent. Once a new miner actor has been created and subsequent steps fail, the user need to run 'curio config new-cluster < miner ID >' to finish the configuration.": 2,
-	"To run Curio: With machine or cgroup isolation, use the command (with example layer selection):":                                                                                                    120,
-	"To start, ensure your sealing pipeline is drained and shut-down lotus-miner.":                                                                                                                       60,
-	"To work with the config: ":                                      119,
+	"To run Curio: With machine or cgroup isolation, use the command (with example layer selection):":                                                                                                    124,
+	"To start, ensure your sealing pipeline is drained and shut-down lotus-miner.":                                                                                                                       63,
+	"To work with the config: ":                                      123,
 	"Try the web interface with %s for further guided improvements.": 11,
+	"Unmigratable sectors found. Do you want to continue?":           18,
 	"Use the arrow keys to navigate: ↓ ↑ → ← ":                       0,
-	"Username: %s": 106,
-	"Waiting for %s to write sectors into Yugabyte.":                  39,
-	"Worker Address: %s":                                              73,
-	"You can add other layers for per-machine configuration changes.": 34,
+	"Username: %s": 109,
+	"Waiting for %s to write sectors into Yugabyte.": 43,
+	"Worker Address: %s":                             76,
+	"Yes, continue":                                  19,
+	"You can add other layers for per-machine configuration changes.": 38,
 	"You can now migrate your market node (%s), if applicable.":       12,
 	"could not get API info for FullNode: %w":                         16,
 }
 
-var enIndex = []uint32{ // 122 elements
+var enIndex = []uint32{ // 126 elements
 	// Entry 0 - 1F
 	0x00000000, 0x00000035, 0x00000097, 0x0000015a,
 	0x0000019c, 0x000001f5, 0x00000210, 0x0000021b,
 	0x0000023d, 0x00000250, 0x0000026a, 0x0000028a,
 	0x000002cc, 0x00000309, 0x0000032c, 0x00000372,
-	0x0000038b, 0x000003b6, 0x000003d1, 0x00000409,
-	0x00000463, 0x00000496, 0x000004e0, 0x00000521,
-	0x00000556, 0x0000055f, 0x00000580, 0x000005a1,
-	0x000005c1, 0x000005de, 0x000005fb, 0x0000062e,
+	0x0000038b, 0x000003b6, 0x000003d1, 0x00000406,
+	0x00000414, 0x0000041e, 0x00000432, 0x0000046a,
+	0x000004c4, 0x000004f7, 0x00000541, 0x00000582,
+	0x000005b7, 0x000005c0, 0x000005e1, 0x00000602,
 	// Entry 20 - 3F
-	0x0000063c, 0x00000650, 0x000006bb, 0x000006fb,
-	0x00000724, 0x0000079b, 0x000007ec, 0x00000838,
-	0x0000086a, 0x00000898, 0x000008b7, 0x000008f9,
-	0x0000093f, 0x00000958, 0x0000096c, 0x0000099c,
-	0x000009c6, 0x000009f0, 0x00000a12, 0x00000a89,
-	0x00000aa5, 0x00000ad2, 0x00000af4, 0x00000b15,
-	0x00000b36, 0x00000b57, 0x00000b78, 0x00000b92,
-	0x00000ba8, 0x00000bf5, 0x00000c2f, 0x00000c35,
+	0x00000622, 0x0000063f, 0x0000065c, 0x0000068f,
+	0x0000069d, 0x000006b1, 0x0000071c, 0x0000075c,
+	0x00000785, 0x000007fc, 0x0000084d, 0x00000899,
+	0x000008cb, 0x000008f9, 0x00000918, 0x0000095a,
+	0x000009a0, 0x000009b9, 0x000009e9, 0x00000a13,
+	0x00000a3d, 0x00000a5f, 0x00000ad6, 0x00000af2,
+	0x00000b1f, 0x00000b41, 0x00000b62, 0x00000b83,
+	0x00000ba4, 0x00000bc5, 0x00000bdf, 0x00000bf5,
 	// Entry 40 - 5F
-	0x00000c71, 0x00000c9d, 0x00000ce6, 0x00000d26,
-	0x00000d77, 0x00000d89, 0x00000da3, 0x00000dc3,
-	0x00000de8, 0x00000dfd, 0x00000e13, 0x00000e29,
-	0x00000e3c, 0x00000e55, 0x00000e94, 0x00000ebe,
-	0x00000ed6, 0x00000eea, 0x00000f0d, 0x00000f21,
-	0x00000f37, 0x00000f49, 0x00000f6c, 0x00000f7e,
-	0x00000fa0, 0x00000fc8, 0x00000fe9, 0x00001004,
-	0x0000102d, 0x0000104f, 0x00001081, 0x00001118,
+	0x00000c42, 0x00000c7c, 0x00000c82, 0x00000cbe,
+	0x00000cea, 0x00000d33, 0x00000d73, 0x00000dc4,
+	0x00000dd6, 0x00000df0, 0x00000e10, 0x00000e35,
+	0x00000e4a, 0x00000e60, 0x00000e76, 0x00000e89,
+	0x00000ea2, 0x00000ee1, 0x00000f0b, 0x00000f23,
+	0x00000f37, 0x00000f5a, 0x00000f6e, 0x00000f84,
+	0x00000f96, 0x00000fb9, 0x00000fcb, 0x00000fed,
+	0x00001015, 0x00001036, 0x00001051, 0x0000107a,
 	// Entry 60 - 7F
-	0x00001143, 0x0000117b, 0x000011a4, 0x000011dc,
-	0x0000121d, 0x0000124d, 0x00001270, 0x00001298,
-	0x000012fa, 0x00001306, 0x00001312, 0x00001322,
-	0x00001332, 0x00001342, 0x00001369, 0x000013aa,
-	0x000013ce, 0x000013df, 0x00001401, 0x0000142e,
-	0x0000148d, 0x0000152a, 0x00001578, 0x00001592,
-	0x000015b0, 0x00001610,
-} // Size: 512 bytes
+	0x0000109c, 0x000010ce, 0x00001165, 0x00001190,
+	0x000011c8, 0x000011f1, 0x00001229, 0x0000126a,
+	0x0000129a, 0x000012bd, 0x000012e5, 0x00001347,
+	0x00001353, 0x0000135f, 0x0000136f, 0x0000137f,
+	0x0000138f, 0x000013b6, 0x000013f7, 0x0000141b,
+	0x0000142c, 0x0000144e, 0x0000147b, 0x000014a1,
+	0x00001500, 0x0000159d, 0x000015eb, 0x00001605,
+	0x00001623, 0x00001683,
+} // Size: 528 bytes
 
-const enData string = "" + // Size: 5648 bytes
+const enData string = "" + // Size: 5763 bytes
 	"\x04\x00\x01 0\x02Use the arrow keys to navigate: ↓ ↑ → ←\x02This intera" +
 	"ctive tool creates a new miner actor and creates the basic configuration" +
 	" layer for it.\x02This process is partially idempotent. Once a new miner" +
@@ -216,118 +221,120 @@ const enData string = "" + // Size: 5648 bytes
 	"e (%[1]s), if applicable.\x02New Miner initialization complete.\x02Migra" +
 	"ting lotus-miner config.toml to Curio in-database configuration.\x02Erro" +
 	"r getting API: %[1]s\x02could not get API info for FullNode: %[1]w\x02Er" +
-	"ror getting token: %[1]s\x02Error saving config to layer: %[1]s. Abortin" +
-	"g Migration\x02The Curio team wants to improve the software you use. Tel" +
-	"l the team you're using `%[1]s`.\x02Select what you want to share with t" +
-	"he Curio team.\x02Individual Data: Miner ID, Curio version, chain (%[1]s" +
-	" or %[2]s). Signed.\x02Aggregate-Anonymous: version, chain, and Miner po" +
-	"wer (bucketed).\x02Hint: I am someone running Curio on whichever chain." +
-	"\x02Nothing.\x02Error getting miner power: %[1]s\x02Error marshalling me" +
-	"ssage: %[1]s\x02Error getting miner info: %[1]s\x02Error signing message" +
-	": %[1]s\x02Error sending message: %[1]s\x04\x00\x01 .\x02Error sending m" +
-	"essage: Status %[1]s, Message:\x02Message sent.\x04\x00\x01 \x0f\x02Docu" +
-	"mentation:\x02The '%[1]s' layer stores common configuration. All curio i" +
-	"nstances can include it in their %[2]s argument.\x02You can add other la" +
-	"yers for per-machine configuration changes.\x02Filecoin %[1]s channels: " +
-	"%[2]s and %[3]s\x02Increase reliability using redundancy: start multiple" +
-	" machines with at-least the post layer: 'curio run --layers=post'\x02One" +
-	" database can serve multiple miner IDs: Run a migration for each lotus-m" +
-	"iner.\x02Please start (or restart) %[1]s now that database credentials a" +
-	"re in %[2]s.\x02Waiting for %[1]s to write sectors into Yugabyte.\x02Err" +
-	"or interpreting miner ID: %[1]s: ID: %[2]s\x02Error verifying sectors: %" +
-	"[1]s\x02The sectors are in the database. The database is ready for %[1]s" +
-	".\x02Now shut down lotus-miner and lotus-worker and use run %[1]s instea" +
-	"d.\x02Press return to continue\x02Aborting migration.\x02Sectors verifie" +
-	"d. %[1]d sector locations found.\x02Connected to Yugabyte. Schema is cur" +
-	"rent.\x02Enabling Sector Indexing in the database.\x02Error encoding con" +
-	"fig.toml: %[1]s\x02Press return to update %[1]s with Yugabyte info. A Ba" +
-	"ckup file will be written to that folder before changes are made.\x02Err" +
-	"or expanding path: %[1]s\x02Error reading filemode of config.toml: %[1]s" +
-	"\x02Error creating backup file: %[1]s\x02Error reading config.toml: %[1]" +
-	"s\x02Error writing backup file: %[1]s\x02Error closing backup file: %[1]" +
-	"s\x02Error writing config.toml: %[1]s\x04\x00\x01 \x15\x02Restart Lotus " +
-	"Miner.\x02Connected to Yugabyte\x02To start, ensure your sealing pipelin" +
-	"e is drained and shut-down lotus-miner.\x02Select the location of your l" +
-	"otus-miner config directory?\x02Other\x02Enter the path to the configura" +
-	"tion directory used by %[1]s\x04\x00\x01 '\x02No path provided, abandoni" +
-	"ng migration\x02Cannot read the config.toml file in the provided directo" +
-	"ry, Error: %[1]s\x02Could not create repo from directory: %[1]s. Abortin" +
-	"g migration\x02Could not lock miner repo. Your miner must be stopped: %[" +
-	"1]s\x0a Aborting migration\x02Read Miner Config\x04\x00\x01\x0a\x15\x02S" +
-	"tep Complete: %[1]s\x02Initializing a new miner actor.\x02Enter the info" +
-	" to create a new miner\x02Owner Address: %[1]s\x02Worker Address: %[1]s" +
-	"\x02Sender Address: %[1]s\x02Sector Size: %[1]d\x02Confidence epochs: %[" +
-	"1]d\x02Continue to verify the addresses and create a new miner actor." +
-	"\x04\x00\x01 %\x02Miner creation error occurred: %[1]s\x02Enter the owne" +
-	"r address\x02No address provided\x02Failed to parse the address: %[1]s" +
-	"\x02Enter %[1]s address\x02Enter the sector size\x02No value provided" +
-	"\x02Failed to parse sector size: %[1]s\x02Confidence epochs\x02Failed to" +
-	" parse confidence: %[1]s\x02Failed to create the miner actor: %[1]s\x02M" +
-	"iner %[1]s created successfully\x02Cannot reach the DB: %[1]s\x02Error c" +
-	"onnecting to full node API: %[1]s\x02Pre-initialization steps complete" +
-	"\x02Failed to generate random bytes for secret: %[1]s\x02Please do not r" +
-	"un guided-setup again as miner creation is not idempotent. You need to r" +
-	"un 'curio config new-cluster %[1]s' to finish the configuration\x02Faile" +
-	"d to get API info for FullNode: %[1]w\x02Failed to verify the auth token" +
-	" from daemon node: %[1]s\x02Failed to generate default config: %[1]s\x02" +
-	"Failed to insert 'base' config layer in database: %[1]s\x02Configuration" +
-	" 'base' was updated to include this miner's address\x02Failed to load ba" +
-	"se config from database: %[1]s\x02Failed to parse base config: %[1]s\x02" +
-	"Failed to regenerate base config: %[1]s\x02Enter the info to connect to " +
-	"your Yugabyte database installation (https://download.yugabyte.com/)\x02" +
-	"Host: %[1]s\x02Port: %[1]s\x02Username: %[1]s\x02Password: %[1]s\x02Data" +
-	"base: %[1]s\x02Continue to connect and update schema.\x04\x00\x01 <\x02D" +
-	"atabase config error occurred, abandoning migration: %[1]s\x02Enter the " +
-	"Yugabyte database host(s)\x02No host provided\x02Enter the Yugabyte data" +
-	"base %[1]s\x02Error connecting to Yugabyte database: %[1]s\x02Configurat" +
-	"ion 'base' was updated to include this miner's address (%[1]s) and its w" +
-	"allet setup.\x02Compare the configurations %[1]s to %[2]s. Changes betwe" +
-	"en the miner IDs other than wallet addreses should be a new, minimal lay" +
-	"er for runners that need it.\x02Configuration 'base' was created to rese" +
-	"mble this lotus-miner's config.toml .\x04\x00\x01 \x15\x02Layer %[1]s cr" +
-	"eated.\x04\x00\x01 \x19\x02To work with the config:\x02To run Curio: Wit" +
-	"h machine or cgroup isolation, use the command (with example layer selec" +
-	"tion):"
+	"ror getting token: %[1]s\x02Unmigratable sectors found. Do you want to c" +
+	"ontinue?\x02Yes, continue\x02No, abort\x02Aborting migration.\x02Error s" +
+	"aving config to layer: %[1]s. Aborting Migration\x02The Curio team wants" +
+	" to improve the software you use. Tell the team you're using `%[1]s`." +
+	"\x02Select what you want to share with the Curio team.\x02Individual Dat" +
+	"a: Miner ID, Curio version, chain (%[1]s or %[2]s). Signed.\x02Aggregate" +
+	"-Anonymous: version, chain, and Miner power (bucketed).\x02Hint: I am so" +
+	"meone running Curio on whichever chain.\x02Nothing.\x02Error getting min" +
+	"er power: %[1]s\x02Error marshalling message: %[1]s\x02Error getting min" +
+	"er info: %[1]s\x02Error signing message: %[1]s\x02Error sending message:" +
+	" %[1]s\x04\x00\x01 .\x02Error sending message: Status %[1]s, Message:" +
+	"\x02Message sent.\x04\x00\x01 \x0f\x02Documentation:\x02The '%[1]s' laye" +
+	"r stores common configuration. All curio instances can include it in the" +
+	"ir %[2]s argument.\x02You can add other layers for per-machine configura" +
+	"tion changes.\x02Filecoin %[1]s channels: %[2]s and %[3]s\x02Increase re" +
+	"liability using redundancy: start multiple machines with at-least the po" +
+	"st layer: 'curio run --layers=post'\x02One database can serve multiple m" +
+	"iner IDs: Run a migration for each lotus-miner.\x02Please start (or rest" +
+	"art) %[1]s now that database credentials are in %[2]s.\x02Waiting for %[" +
+	"1]s to write sectors into Yugabyte.\x02Error interpreting miner ID: %[1]" +
+	"s: ID: %[2]s\x02Error verifying sectors: %[1]s\x02The sectors are in the" +
+	" database. The database is ready for %[1]s.\x02Now shut down lotus-miner" +
+	" and lotus-worker and use run %[1]s instead.\x02Press return to continue" +
+	"\x02Sectors verified. %[1]d sector locations found.\x02Connected to Yuga" +
+	"byte. Schema is current.\x02Enabling Sector Indexing in the database." +
+	"\x02Error encoding config.toml: %[1]s\x02Press return to update %[1]s wi" +
+	"th Yugabyte info. A Backup file will be written to that folder before ch" +
+	"anges are made.\x02Error expanding path: %[1]s\x02Error reading filemode" +
+	" of config.toml: %[1]s\x02Error creating backup file: %[1]s\x02Error rea" +
+	"ding config.toml: %[1]s\x02Error writing backup file: %[1]s\x02Error clo" +
+	"sing backup file: %[1]s\x02Error writing config.toml: %[1]s\x04\x00\x01 " +
+	"\x15\x02Restart Lotus Miner.\x02Connected to Yugabyte\x02To start, ensur" +
+	"e your sealing pipeline is drained and shut-down lotus-miner.\x02Select " +
+	"the location of your lotus-miner config directory?\x02Other\x02Enter the" +
+	" path to the configuration directory used by %[1]s\x04\x00\x01 '\x02No p" +
+	"ath provided, abandoning migration\x02Cannot read the config.toml file i" +
+	"n the provided directory, Error: %[1]s\x02Could not create repo from dir" +
+	"ectory: %[1]s. Aborting migration\x02Could not lock miner repo. Your min" +
+	"er must be stopped: %[1]s\x0a Aborting migration\x02Read Miner Config" +
+	"\x04\x00\x01\x0a\x15\x02Step Complete: %[1]s\x02Initializing a new miner" +
+	" actor.\x02Enter the info to create a new miner\x02Owner Address: %[1]s" +
+	"\x02Worker Address: %[1]s\x02Sender Address: %[1]s\x02Sector Size: %[1]d" +
+	"\x02Confidence epochs: %[1]d\x02Continue to verify the addresses and cre" +
+	"ate a new miner actor.\x04\x00\x01 %\x02Miner creation error occurred: %" +
+	"[1]s\x02Enter the owner address\x02No address provided\x02Failed to pars" +
+	"e the address: %[1]s\x02Enter %[1]s address\x02Enter the sector size\x02" +
+	"No value provided\x02Failed to parse sector size: %[1]s\x02Confidence ep" +
+	"ochs\x02Failed to parse confidence: %[1]s\x02Failed to create the miner " +
+	"actor: %[1]s\x02Miner %[1]s created successfully\x02Cannot reach the DB:" +
+	" %[1]s\x02Error connecting to full node API: %[1]s\x02Pre-initialization" +
+	" steps complete\x02Failed to generate random bytes for secret: %[1]s\x02" +
+	"Please do not run guided-setup again as miner creation is not idempotent" +
+	". You need to run 'curio config new-cluster %[1]s' to finish the configu" +
+	"ration\x02Failed to get API info for FullNode: %[1]w\x02Failed to verify" +
+	" the auth token from daemon node: %[1]s\x02Failed to generate default co" +
+	"nfig: %[1]s\x02Failed to insert 'base' config layer in database: %[1]s" +
+	"\x02Configuration 'base' was updated to include this miner's address\x02" +
+	"Failed to load base config from database: %[1]s\x02Failed to parse base " +
+	"config: %[1]s\x02Failed to regenerate base config: %[1]s\x02Enter the in" +
+	"fo to connect to your Yugabyte database installation (https://download.y" +
+	"ugabyte.com/)\x02Host: %[1]s\x02Port: %[1]s\x02Username: %[1]s\x02Passwo" +
+	"rd: %[1]s\x02Database: %[1]s\x02Continue to connect and update schema." +
+	"\x04\x00\x01 <\x02Database config error occurred, abandoning migration: " +
+	"%[1]s\x02Enter the Yugabyte database host(s)\x02No host provided\x02Ente" +
+	"r the Yugabyte database %[1]s\x02Error connecting to Yugabyte database: " +
+	"%[1]s\x02Migrating metadata for %[1]d sectors.\x02Configuration 'base' w" +
+	"as updated to include this miner's address (%[1]s) and its wallet setup." +
+	"\x02Compare the configurations %[1]s to %[2]s. Changes between the miner" +
+	" IDs other than wallet addreses should be a new, minimal layer for runne" +
+	"rs that need it.\x02Configuration 'base' was created to resemble this lo" +
+	"tus-miner's config.toml .\x04\x00\x01 \x15\x02Layer %[1]s created.\x04" +
+	"\x00\x01 \x19\x02To work with the config:\x02To run Curio: With machine " +
+	"or cgroup isolation, use the command (with example layer selection):"
 
-var koIndex = []uint32{ // 122 elements
+var koIndex = []uint32{ // 126 elements
 	// Entry 0 - 1F
 	0x00000000, 0x00000044, 0x000000c1, 0x000001c1,
 	0x0000020e, 0x00000289, 0x000002aa, 0x000002bc,
 	0x000002e5, 0x00000300, 0x00000325, 0x00000348,
 	0x000003b2, 0x00000402, 0x00000428, 0x00000481,
-	0x000004a0, 0x000004dc, 0x0000050c, 0x00000564,
-	0x000005f0, 0x00000629, 0x0000067f, 0x000006bd,
-	0x0000070b, 0x00000726, 0x00000760, 0x00000793,
-	0x000007cd, 0x000007f7, 0x00000821, 0x00000863,
+	0x000004a0, 0x000004dc, 0x0000050c, 0x0000055c,
+	0x00000568, 0x0000057a, 0x00000595, 0x000005ed,
+	0x00000679, 0x000006b2, 0x00000708, 0x00000746,
+	0x00000794, 0x000007af, 0x000007e9, 0x0000081c,
 	// Entry 20 - 3F
-	0x00000887, 0x00000894, 0x0000091a, 0x0000096c,
-	0x00000993, 0x00000a2f, 0x00000ac1, 0x00000b3c,
-	0x00000b80, 0x00000bbe, 0x00000be5, 0x00000c50,
-	0x00000c9d, 0x00000cc4, 0x00000cdf, 0x00000d2e,
-	0x00000d6f, 0x00000daf, 0x00000df6, 0x00000e9c,
-	0x00000ecc, 0x00000f1b, 0x00000f3e, 0x00000f5f,
-	0x00000f82, 0x00000fa5, 0x00000fe3, 0x00001007,
-	0x0000101d, 0x00001088, 0x000010d7, 0x000010de,
+	0x00000856, 0x00000880, 0x000008aa, 0x000008ec,
+	0x00000910, 0x0000091d, 0x000009a3, 0x000009f5,
+	0x00000a1c, 0x00000ab8, 0x00000b4a, 0x00000bc5,
+	0x00000c09, 0x00000c47, 0x00000c6e, 0x00000cd9,
+	0x00000d26, 0x00000d4d, 0x00000d9c, 0x00000ddd,
+	0x00000e1d, 0x00000e64, 0x00000f0a, 0x00000f3a,
+	0x00000f89, 0x00000fac, 0x00000fcd, 0x00000ff0,
+	0x00001013, 0x00001051, 0x00001075, 0x0000108b,
 	// Entry 40 - 5F
-	0x00001126, 0x00001178, 0x000011d2, 0x0000123c,
-	0x000012cd, 0x000012e5, 0x000012ff, 0x00001323,
-	0x00001356, 0x0000136e, 0x00001386, 0x0000139e,
-	0x000013b3, 0x000013cb, 0x00001422, 0x0000144d,
-	0x00001465, 0x0000148c, 0x000014af, 0x000014c3,
-	0x000014d8, 0x000014fc, 0x00001526, 0x00001537,
-	0x0000155d, 0x00001583, 0x000015bc, 0x000015f4,
-	0x0000162c, 0x0000164b, 0x00001697, 0x00001755,
+	0x000010f6, 0x00001145, 0x0000114c, 0x00001194,
+	0x000011e6, 0x00001240, 0x000012aa, 0x0000133b,
+	0x00001353, 0x0000136d, 0x00001391, 0x000013c4,
+	0x000013dc, 0x000013f4, 0x0000140c, 0x00001421,
+	0x00001439, 0x00001490, 0x000014bb, 0x000014d3,
+	0x000014fa, 0x0000151d, 0x00001531, 0x00001546,
+	0x0000156a, 0x00001594, 0x000015a5, 0x000015cb,
+	0x000015f1, 0x0000162a, 0x00001662, 0x0000169a,
 	// Entry 60 - 7F
-	0x000017a1, 0x000017ef, 0x00001812, 0x0000186e,
-	0x000018be, 0x00001913, 0x00001956, 0x00001995,
-	0x00001a03, 0x00001a14, 0x00001a22, 0x00001a3a,
-	0x00001a4e, 0x00001a68, 0x00001a92, 0x00001af5,
-	0x00001b31, 0x00001b5b, 0x00001b93, 0x00001be7,
-	0x00001c60, 0x00001d1a, 0x00001d71, 0x00001da0,
-	0x00001dc7, 0x00001e53,
-} // Size: 512 bytes
+	0x000016b9, 0x00001705, 0x000017c3, 0x0000180f,
+	0x0000185d, 0x00001880, 0x000018dc, 0x0000192c,
+	0x00001981, 0x000019c4, 0x00001a03, 0x00001a71,
+	0x00001a82, 0x00001a90, 0x00001aa8, 0x00001abc,
+	0x00001ad6, 0x00001b00, 0x00001b63, 0x00001b9f,
+	0x00001bc9, 0x00001c01, 0x00001c55, 0x00001c8d,
+	0x00001d06, 0x00001dc0, 0x00001e17, 0x00001e46,
+	0x00001e6d, 0x00001ef9,
+} // Size: 528 bytes
 
-const koData string = "" + // Size: 7763 bytes
+const koData string = "" + // Size: 7929 bytes
 	"\x04\x00\x01 ?\x02화살표 키를 사용하여 이동하세요: ↓ ↑ → ←\x02이 대화형 도구는 새로운 채굴자 액터를 생성" +
 	"하고 그에 대한 기본 구성 레이어를 생성합니다.\x02이 프로세스는 부분적으로 항등원적입니다. 새로운 채굴자 액터가 생성되었고" +
 	" 후속 단계가 실패하는 경우 사용자는 구성을 완료하기 위해 'curio config new-cluster < 채굴자 ID >'를 " +
@@ -337,98 +344,100 @@ const koData string = "" + // Size: 7763 bytes
 	"s-Miner에서 Curio로 이주.\x02%[1]s를 사용하여 웹 인터페이스를 시도하고 더 나은 안내된 개선을 진행하세요." +
 	"\x02해당하는 경우 이제 시장 노드를 이주할 수 있습니다 (%[1]s).\x02새로운 채굴자 초기화 완료.\x02lotus-mi" +
 	"ner config.toml을 Curio의 데이터베이스 구성으로 이전 중입니다.\x02API 가져오기 오류: %[1]s\x02Fu" +
-	"llNode의 API 정보를 가져올 수 없습니다: %[1]w\x02토큰을 가져오는 중 오류 발생: %[1]s\x02레이어에 구성을" +
-	" 저장하는 중 오류 발생: %[1]s. 마이그레이션 중단\x02Curio 팀은 당신이 사용하는 소프트웨어를 개선하고자 합니다. 팀" +
-	"에게 `%[1]s`를 사용 중이라고 알려주세요.\x02Curio 팀과 공유하고 싶은 것을 선택하세요.\x02개별 데이터: 채굴" +
-	"자 ID, Curio 버전, 체인 (%[1]s 또는 %[2]s). 서명됨.\x02집계-익명: 버전, 체인, 및 채굴자 파워 (" +
-	"버킷).\x02힌트: 나는 어떤 체인에서든 Curio를 실행 중인 사람입니다.\x02아무것도 없습니다.\x02마이너 파워를 가" +
-	"져오는 중 오류 발생: %[1]s\x02메시지를 마샬하는 중 오류 발생: %[1]s\x02마이너 정보를 가져오는 중 오류 발생" +
-	": %[1]s\x02메시지 서명 중 오류 발생: %[1]s\x02메시지 전송 중 오류 발생: %[1]s\x04\x00\x01 =" +
-	"\x02메시지 전송 중 오류 발생: 상태 %[1]s, 메시지:\x02메시지가 전송되었습니다.\x04\x00\x01 \x08\x02" +
-	"문서:\x02'%[1]s' 레이어에는 공통 구성이 저장됩니다. 모든 Curio 인스턴스는 %[2]s 인수에 포함시킬 수 있습니" +
-	"다.\x02기계별 구성 변경을 위해 다른 레이어를 추가할 수 있습니다.\x02Filecoin %[1]s 채널: %[2]s 및 " +
-	"%[3]s\x02신뢰성 향상을 위한 중복성 사용: 적어도 post 레이어를 사용하여 여러 대의 기계를 시작하십시오: 'curio " +
-	"run --layers=post'\x02한 개의 데이터베이스는 여러 광부 ID를 제공할 수 있습니다: 각 lotus-miner에 " +
-	"대해 마이그레이션을 실행하세요.\x02데이터베이스 자격 증명이 %[2]s에 입력되었으므로 지금 %[1]s을 시작하거나 다시 시" +
-	"작하세요.\x02%[1]s가 Yugabyte에 섹터를 기록하도록 대기 중입니다.\x02광부 ID를 해석하는 중 오류 발생: %" +
-	"[1]s: ID: %[2]s\x02섹터 확인 중 오류 발생: %[1]s\x02섹터가 데이터베이스에 있습니다. 데이터베이스가 %[1" +
-	"]s를 위해 준비되었습니다.\x02이제 lotus-miner와 lotus-worker를 종료하고 %[1]s을 실행하세요.\x02계" +
-	"속하려면 리턴을 누르세요\x02마이그레이션 중단.\x02섹터가 확인되었습니다. %[1]d개의 섹터 위치를 찾았습니다.\x02Y" +
-	"ugabyte에 연결되었습니다. 스키마가 현재입니다.\x02데이터베이스에서 Sector Indexing을 활성화합니다.\x02co" +
-	"nfig.toml을 인코딩하는 중 오류가 발생했습니다: %[1]s\x02%[1]s을 Yugabyte 정보로 업데이트하려면 리턴 키" +
-	"를 누르세요. 변경 사항을 적용하기 전에 해당 폴더에 백업 파일이 작성됩니다.\x02경로를 확장하는 중 오류 발생: %[1]s" +
-	"\x02config.toml의 파일 모드를 읽는 중 오류가 발생했습니다: %[1]s\x02백업 파일 생성 오류: %[1]s\x02" +
-	"config.toml 읽기 오류: %[1]s\x02백업 파일 쓰기 오류: %[1]s\x02백업 파일 닫기 오류: %[1]s\x02" +
-	"config.toml을 쓰는 중 오류가 발생했습니다: %[1]s\x04\x00\x01 \x1f\x02로터스 마이너 재시작.\x02" +
-	"Yugabyte에 연결됨\x02시작하려면 밀봉 파이프라인이 비어 있고 lotus-miner가 종료되었는지 확인하세요.\x02로터스" +
-	" 마이너 구성 디렉토리의 위치를 선택하시겠습니까?\x02기타\x02%[1]s에서 사용하는 구성 디렉터리 경로를 입력하세요.\x04" +
-	"\x00\x01 M\x02경로가 제공되지 않았으므로 마이그레이션을 포기합니다\x02제공된 디렉토리에서 config.toml 파일을" +
-	" 읽을 수 없습니다. 오류: %[1]s\x02디렉토리에서 저장소를 생성할 수 없습니다: %[1]s. 마이그레이션을 중단합니다." +
-	"\x02광부 저장소를 잠금 해제할 수 없습니다. 귀하의 광부를 중지해야 합니다: %[1]s\x0a 마이그레이션을 중단합니다." +
-	"\x02마이너 구성 읽기\x04\x00\x01\x0a\x15\x02단계 완료: %[1]s\x02새 채굴자 액터 초기화 중.\x02" +
-	"새 채굴자를 생성하기 위한 정보 입력\x02소유자 주소: %[1]s\x02작업자 주소: %[1]s\x02송신자 주소: %[1]" +
-	"s\x02섹터 크기: %[1]d\x02신뢰 에포크: %[1]d\x02주소를 확인하고 새 채굴자 액터를 생성하려면 계속 진행하세요." +
-	"\x04\x00\x01 &\x02채굴자 생성 오류 발생: %[1]s\x02소유자 주소 입력\x02주소가 제공되지 않았습니다\x02" +
-	"주소 구문 분석 실패: %[1]s\x02%[1]s 주소 입력\x02섹터 크기 입력\x02값이 제공되지 않았습니다\x02섹터 크" +
-	"기 구문 분석 실패: %[1]s\x02신뢰 에포크\x02신뢰도 구문 분석 실패: %[1]s\x02채굴자 액터 생성 실패: %[" +
-	"1]s\x02%[1]s 채굴자가 성공적으로 생성되었습니다\x02데이터베이스에 연결할 수 없습니다: %[1]s\x02풀 노드 API" +
-	"에 연결하는 중 오류 발생: %[1]s\x02사전 초기화 단계 완료\x02비밀번호를 위한 랜덤 바이트 생성에 실패했습니다: %" +
-	"[1]s\x02마이너 생성은 idempotent하지 않으므로 가이드 설정을 다시 실행하지 마십시오. 구성을 완료하려면 'curio" +
-	" config new-cluster %[1]s'를 실행해야 합니다.\x02FullNode에 대한 API 정보를 가져오는 데 실패했" +
-	"습니다: %[1]w\x02데몬 노드로부터 인증 토큰을 확인하는 중 오류 발생: %[1]s\x02기본 구성 생성 실패: %[1]" +
-	"s\x02데이터베이스에 'base' 구성 레이어를 삽입하는 데 실패했습니다: %[1]s\x02이 마이너 주소를 포함한 구성 'ba" +
-	"se'가 업데이트되었습니다.\x02데이터베이스에서 기본 구성을 로드하는 데 실패했습니다: %[1]s\x02기본 구성을 구문 분석하" +
-	"는 데 실패했습니다: %[1]s\x02기본 구성을 재생성하는 데 실패했습니다: %[1]s\x02Yugabyte 데이터베이스 설" +
-	"치에 연결할 정보를 입력하십시오 (https://download.yugabyte.com/)\x02호스트: %[1]s\x02포트" +
-	": %[1]s\x02사용자 이름: %[1]s\x02비밀번호: %[1]s\x02데이터베이스: %[1]s\x02계속 연결 및 스키마 " +
-	"업데이트.\x04\x00\x01 ^\x02데이터베이스 구성 오류가 발생하여 마이그레이션을 포기합니다: %[1]s\x02Yuga" +
-	"byte 데이터베이스 호스트를 입력하십시오\x02호스트가 제공되지 않았습니다\x02Yugabyte 데이터베이스 %[1]s을 입력하" +
-	"십시오\x02Yugabyte 데이터베이스에 연결하는 중 오류가 발생했습니다: %[1]s\x02기본 설정 'base'가 이 마이" +
-	"너의 주소(%[1]s) 및 지갑 설정을 포함하도록 업데이트되었습니다.\x02구성 %[1]s를 %[2]s과 비교하세요. 지갑 주" +
-	"소 이외의 마이너 ID 사이의 변경 사항은 필요한 실행자를 위한 새로운 최소한의 레이어여야 합니다.\x02'base' 설정이 " +
-	"이 lotus-miner의 config.toml과 유사하게 만들어졌습니다.\x04\x00\x01 *\x02레이어 %[1]s가 " +
-	"생성되었습니다.\x04\x00\x01 \x22\x02구성 파일을 사용하려면:\x02Curio를 실행하려면: 기계 또는 cgro" +
-	"up 격리를 사용하여 다음 명령을 사용하세요 (예제 레이어 선택과 함께):"
+	"llNode의 API 정보를 가져올 수 없습니다: %[1]w\x02토큰을 가져오는 중 오류 발생: %[1]s\x02이동할 수 없는" +
+	" 섹터가 발견되었습니다. 계속하시겠습니까?\x02예, 계속\x02아니오, 중단\x02마이그레이션 중단.\x02레이어에 구성을 저장" +
+	"하는 중 오류 발생: %[1]s. 마이그레이션 중단\x02Curio 팀은 당신이 사용하는 소프트웨어를 개선하고자 합니다. 팀에" +
+	"게 `%[1]s`를 사용 중이라고 알려주세요.\x02Curio 팀과 공유하고 싶은 것을 선택하세요.\x02개별 데이터: 채굴자" +
+	" ID, Curio 버전, 체인 (%[1]s 또는 %[2]s). 서명됨.\x02집계-익명: 버전, 체인, 및 채굴자 파워 (버킷)" +
+	".\x02힌트: 나는 어떤 체인에서든 Curio를 실행 중인 사람입니다.\x02아무것도 없습니다.\x02마이너 파워를 가져오는 중" +
+	" 오류 발생: %[1]s\x02메시지를 마샬하는 중 오류 발생: %[1]s\x02마이너 정보를 가져오는 중 오류 발생: %[1]s" +
+	"\x02메시지 서명 중 오류 발생: %[1]s\x02메시지 전송 중 오류 발생: %[1]s\x04\x00\x01 =\x02메시지 " +
+	"전송 중 오류 발생: 상태 %[1]s, 메시지:\x02메시지가 전송되었습니다.\x04\x00\x01 \x08\x02문서:" +
+	"\x02'%[1]s' 레이어에는 공통 구성이 저장됩니다. 모든 Curio 인스턴스는 %[2]s 인수에 포함시킬 수 있습니다." +
+	"\x02기계별 구성 변경을 위해 다른 레이어를 추가할 수 있습니다.\x02Filecoin %[1]s 채널: %[2]s 및 %[3]" +
+	"s\x02신뢰성 향상을 위한 중복성 사용: 적어도 post 레이어를 사용하여 여러 대의 기계를 시작하십시오: 'curio run " +
+	"--layers=post'\x02한 개의 데이터베이스는 여러 광부 ID를 제공할 수 있습니다: 각 lotus-miner에 대해 마" +
+	"이그레이션을 실행하세요.\x02데이터베이스 자격 증명이 %[2]s에 입력되었으므로 지금 %[1]s을 시작하거나 다시 시작하세요" +
+	".\x02%[1]s가 Yugabyte에 섹터를 기록하도록 대기 중입니다.\x02광부 ID를 해석하는 중 오류 발생: %[1]s: " +
+	"ID: %[2]s\x02섹터 확인 중 오류 발생: %[1]s\x02섹터가 데이터베이스에 있습니다. 데이터베이스가 %[1]s를 위해" +
+	" 준비되었습니다.\x02이제 lotus-miner와 lotus-worker를 종료하고 %[1]s을 실행하세요.\x02계속하려면 리" +
+	"턴을 누르세요\x02섹터가 확인되었습니다. %[1]d개의 섹터 위치를 찾았습니다.\x02Yugabyte에 연결되었습니다. 스키" +
+	"마가 현재입니다.\x02데이터베이스에서 Sector Indexing을 활성화합니다.\x02config.toml을 인코딩하는 중" +
+	" 오류가 발생했습니다: %[1]s\x02%[1]s을 Yugabyte 정보로 업데이트하려면 리턴 키를 누르세요. 변경 사항을 적용하" +
+	"기 전에 해당 폴더에 백업 파일이 작성됩니다.\x02경로를 확장하는 중 오류 발생: %[1]s\x02config.toml의 파" +
+	"일 모드를 읽는 중 오류가 발생했습니다: %[1]s\x02백업 파일 생성 오류: %[1]s\x02config.toml 읽기 오" +
+	"류: %[1]s\x02백업 파일 쓰기 오류: %[1]s\x02백업 파일 닫기 오류: %[1]s\x02config.toml을 쓰" +
+	"는 중 오류가 발생했습니다: %[1]s\x04\x00\x01 \x1f\x02로터스 마이너 재시작.\x02Yugabyte에 연결" +
+	"됨\x02시작하려면 밀봉 파이프라인이 비어 있고 lotus-miner가 종료되었는지 확인하세요.\x02로터스 마이너 구성 디렉" +
+	"토리의 위치를 선택하시겠습니까?\x02기타\x02%[1]s에서 사용하는 구성 디렉터리 경로를 입력하세요.\x04\x00\x01" +
+	" M\x02경로가 제공되지 않았으므로 마이그레이션을 포기합니다\x02제공된 디렉토리에서 config.toml 파일을 읽을 수 없습" +
+	"니다. 오류: %[1]s\x02디렉토리에서 저장소를 생성할 수 없습니다: %[1]s. 마이그레이션을 중단합니다.\x02광부 저" +
+	"장소를 잠금 해제할 수 없습니다. 귀하의 광부를 중지해야 합니다: %[1]s\x0a 마이그레이션을 중단합니다.\x02마이너 구" +
+	"성 읽기\x04\x00\x01\x0a\x15\x02단계 완료: %[1]s\x02새 채굴자 액터 초기화 중.\x02새 채굴자를 " +
+	"생성하기 위한 정보 입력\x02소유자 주소: %[1]s\x02작업자 주소: %[1]s\x02송신자 주소: %[1]s\x02섹터" +
+	" 크기: %[1]d\x02신뢰 에포크: %[1]d\x02주소를 확인하고 새 채굴자 액터를 생성하려면 계속 진행하세요.\x04" +
+	"\x00\x01 &\x02채굴자 생성 오류 발생: %[1]s\x02소유자 주소 입력\x02주소가 제공되지 않았습니다\x02주소 구" +
+	"문 분석 실패: %[1]s\x02%[1]s 주소 입력\x02섹터 크기 입력\x02값이 제공되지 않았습니다\x02섹터 크기 구문" +
+	" 분석 실패: %[1]s\x02신뢰 에포크\x02신뢰도 구문 분석 실패: %[1]s\x02채굴자 액터 생성 실패: %[1]s" +
+	"\x02%[1]s 채굴자가 성공적으로 생성되었습니다\x02데이터베이스에 연결할 수 없습니다: %[1]s\x02풀 노드 API에 연" +
+	"결하는 중 오류 발생: %[1]s\x02사전 초기화 단계 완료\x02비밀번호를 위한 랜덤 바이트 생성에 실패했습니다: %[1]" +
+	"s\x02마이너 생성은 idempotent하지 않으므로 가이드 설정을 다시 실행하지 마십시오. 구성을 완료하려면 'curio co" +
+	"nfig new-cluster %[1]s'를 실행해야 합니다.\x02FullNode에 대한 API 정보를 가져오는 데 실패했습니다" +
+	": %[1]w\x02데몬 노드로부터 인증 토큰을 확인하는 중 오류 발생: %[1]s\x02기본 구성 생성 실패: %[1]s\x02" +
+	"데이터베이스에 'base' 구성 레이어를 삽입하는 데 실패했습니다: %[1]s\x02이 마이너 주소를 포함한 구성 'base'" +
+	"가 업데이트되었습니다.\x02데이터베이스에서 기본 구성을 로드하는 데 실패했습니다: %[1]s\x02기본 구성을 구문 분석하는" +
+	" 데 실패했습니다: %[1]s\x02기본 구성을 재생성하는 데 실패했습니다: %[1]s\x02Yugabyte 데이터베이스 설치에 " +
+	"연결할 정보를 입력하십시오 (https://download.yugabyte.com/)\x02호스트: %[1]s\x02포트: %" +
+	"[1]s\x02사용자 이름: %[1]s\x02비밀번호: %[1]s\x02데이터베이스: %[1]s\x02계속 연결 및 스키마 업데이" +
+	"트.\x04\x00\x01 ^\x02데이터베이스 구성 오류가 발생하여 마이그레이션을 포기합니다: %[1]s\x02Yugabyt" +
+	"e 데이터베이스 호스트를 입력하십시오\x02호스트가 제공되지 않았습니다\x02Yugabyte 데이터베이스 %[1]s을 입력하십시오" +
+	"\x02Yugabyte 데이터베이스에 연결하는 중 오류가 발생했습니다: %[1]s\x02%[1]d 섹터의 메타데이터를 이동 중입니" +
+	"다.\x02기본 설정 'base'가 이 마이너의 주소(%[1]s) 및 지갑 설정을 포함하도록 업데이트되었습니다.\x02구성 %" +
+	"[1]s를 %[2]s과 비교하세요. 지갑 주소 이외의 마이너 ID 사이의 변경 사항은 필요한 실행자를 위한 새로운 최소한의 레이어" +
+	"여야 합니다.\x02'base' 설정이 이 lotus-miner의 config.toml과 유사하게 만들어졌습니다.\x04" +
+	"\x00\x01 *\x02레이어 %[1]s가 생성되었습니다.\x04\x00\x01 \x22\x02구성 파일을 사용하려면:\x02C" +
+	"urio를 실행하려면: 기계 또는 cgroup 격리를 사용하여 다음 명령을 사용하세요 (예제 레이어 선택과 함께):"
 
-var zhIndex = []uint32{ // 122 elements
+var zhIndex = []uint32{ // 126 elements
 	// Entry 0 - 1F
 	0x00000000, 0x00000033, 0x0000008b, 0x00000134,
 	0x0000017c, 0x000001cb, 0x000001e4, 0x000001f1,
 	0x00000211, 0x0000022a, 0x00000240, 0x0000025d,
 	0x000002a5, 0x000002e6, 0x00000302, 0x00000347,
-	0x00000364, 0x0000038d, 0x000003ab, 0x000003e4,
-	0x00000438, 0x00000465, 0x000004b4, 0x000004ef,
-	0x00000524, 0x0000052e, 0x00000552, 0x00000570,
-	0x00000594, 0x000005b2, 0x000005d0, 0x00000605,
+	0x00000364, 0x0000038d, 0x000003ab, 0x000003df,
+	0x000003ef, 0x000003fc, 0x0000040c, 0x00000445,
+	0x00000499, 0x000004c6, 0x00000515, 0x00000550,
+	0x00000585, 0x0000058f, 0x000005b3, 0x000005d1,
 	// Entry 20 - 3F
-	0x00000618, 0x00000627, 0x00000681, 0x000006be,
-	0x000006e6, 0x00000745, 0x00000795, 0x000007e8,
-	0x0000080e, 0x0000083b, 0x00000859, 0x00000895,
-	0x000008d9, 0x000008e9, 0x000008f9, 0x0000092c,
-	0x00000959, 0x0000097e, 0x000009a1, 0x00000a19,
-	0x00000a37, 0x00000a66, 0x00000a8a, 0x00000aaf,
-	0x00000ad3, 0x00000af7, 0x00000b1a, 0x00000b3a,
-	0x00000b4f, 0x00000b9a, 0x00000bca, 0x00000bd1,
+	0x000005f5, 0x00000613, 0x00000631, 0x00000666,
+	0x00000679, 0x00000688, 0x000006e2, 0x0000071f,
+	0x00000747, 0x000007a6, 0x000007f6, 0x00000849,
+	0x0000086f, 0x0000089c, 0x000008ba, 0x000008f6,
+	0x0000093a, 0x0000094a, 0x0000097d, 0x000009aa,
+	0x000009cf, 0x000009f2, 0x00000a6a, 0x00000a88,
+	0x00000ab7, 0x00000adb, 0x00000b00, 0x00000b24,
+	0x00000b48, 0x00000b6b, 0x00000b8b, 0x00000ba0,
 	// Entry 40 - 5F
-	0x00000bfb, 0x00000c1f, 0x00000c63, 0x00000c95,
-	0x00000cde, 0x00000cf1, 0x00000d0b, 0x00000d2a,
-	0x00000d4f, 0x00000d67, 0x00000d7c, 0x00000d94,
-	0x00000da8, 0x00000dbf, 0x00000df0, 0x00000e15,
-	0x00000e2b, 0x00000e3b, 0x00000e55, 0x00000e69,
-	0x00000e7c, 0x00000e89, 0x00000ea9, 0x00000eb9,
-	0x00000ed6, 0x00000ef6, 0x00000f10, 0x00000f2d,
-	0x00000f5e, 0x00000f77, 0x00000fa0, 0x0000102d,
+	0x00000beb, 0x00000c1b, 0x00000c22, 0x00000c4c,
+	0x00000c70, 0x00000cb4, 0x00000ce6, 0x00000d2f,
+	0x00000d42, 0x00000d5c, 0x00000d7b, 0x00000da0,
+	0x00000db8, 0x00000dcd, 0x00000de5, 0x00000df9,
+	0x00000e10, 0x00000e41, 0x00000e66, 0x00000e7c,
+	0x00000e8c, 0x00000ea6, 0x00000eba, 0x00000ecd,
+	0x00000eda, 0x00000efa, 0x00000f0a, 0x00000f27,
+	0x00000f47, 0x00000f61, 0x00000f7e, 0x00000faf,
 	// Entry 60 - 7F
-	0x00001059, 0x00001094, 0x000010b4, 0x000010e5,
-	0x00001118, 0x00001145, 0x00001166, 0x0000118c,
-	0x000011e6, 0x000011f5, 0x00001204, 0x00001216,
-	0x00001225, 0x00001237, 0x00001256, 0x0000128e,
-	0x000012b3, 0x000012c3, 0x000012e1, 0x0000130d,
-	0x0000135e, 0x000013e0, 0x00001427, 0x00001441,
-	0x00001459, 0x000014b0,
-} // Size: 512 bytes
+	0x00000fc8, 0x00000ff1, 0x0000107e, 0x000010aa,
+	0x000010e5, 0x00001105, 0x00001136, 0x00001169,
+	0x00001196, 0x000011b7, 0x000011dd, 0x00001237,
+	0x00001246, 0x00001255, 0x00001267, 0x00001276,
+	0x00001288, 0x000012a7, 0x000012df, 0x00001304,
+	0x00001314, 0x00001332, 0x0000135e, 0x00001388,
+	0x000013d9, 0x0000145b, 0x000014a2, 0x000014bc,
+	0x000014d4, 0x0000152b,
+} // Size: 528 bytes
 
-const zhData string = "" + // Size: 5296 bytes
+const zhData string = "" + // Size: 5419 bytes
 	"\x04\x00\x01 .\x02使用箭头键进行导航：↓ ↑ → ←\x02此交互式工具将创建一个新的矿工角色，并为其创建基本配置层。\x02" +
 	"该过程部分幂等。一旦创建了新的矿工角色，并且随后的步骤失败，用户需要运行 'curio config new-cluster < 矿工 ID" +
 	" >' 来完成配置。\x02这个交互式工具可以在5分钟内将lotus-miner迁移到Curio。\x02每一步都需要您的确认，并且可以撤销。随" +
@@ -436,41 +445,42 @@ const zhData string = "" + // Size: 5296 bytes
 	"\x02中止剩余步骤。\x02Lotus-Miner到Curio迁移。\x02尝试使用%[1]s的网络界面进行更进一步的指导性改进。\x02如果" +
 	"适用，您现在可以迁移您的市场节点(%[1]s)。\x02新矿工初始化完成。\x02将 lotus-miner config.toml 迁移到" +
 	" Curio 的数据库配置中。\x02获取 API 时出错：%[1]s\x02无法获取FullNode的API信息：%[1]w\x02获取令牌时" +
-	"出错：%[1]s\x02保存配置到层时出错：%[1]s。正在中止迁移\x02Curio 团队希望改进您使用的软件。告诉团队您正在使用 `%[" +
-	"1]s`。\x02选择您想与Curio团队分享的内容。\x02个人数据：矿工 ID，Curio 版本，链（%[1]s 或 %[2]s）。签名。" +
-	"\x02聚合-匿名：版本，链和矿工算力（分桶）。\x02提示：我是在任何链上运行 Curio 的人。\x02没有。\x02获取矿工功率时出错：%" +
-	"[1]s\x02整理消息时出错：%[1]s\x02获取矿工信息时出错：%[1]s\x02签署消息时出错：%[1]s\x02发送消息时出错：%[1" +
-	"]s\x04\x00\x01 0\x02发送消息时出错：状态%[1]s，消息：\x02消息已发送。\x04\x00\x01 \x0a\x02文档" +
-	"：\x02'%[1]s'层存储通用配置。所有Curio实例都可以在其%[2]s参数中包含它。\x02您可以添加其他层进行每台机器的配置更改。" +
-	"\x02Filecoin %[1]s 频道：%[2]s 和 %[3]s\x02通过冗余增加可靠性：使用至少后层启动多台机器：'curio run" +
-	" --layers=post'\x02一个数据库可以服务多个矿工ID：为每个lotus-miner运行迁移。\x02请立即启动（或重新启动）%[" +
-	"1]s，因为数据库凭据已在%[2]s中。\x02等待%[1]s将扇区写入Yugabyte。\x02解释矿工ID时出错：%[1]s：ID：%[2]" +
-	"s\x02验证扇区时出错：%[1]s\x02扇区在数据库中。数据库已准备好用于%[1]s。\x02现在关闭lotus-miner和lotus-w" +
-	"orker，改为使用%[1]s运行。\x02按回车继续\x02中止迁移。\x02扇区已验证。发现了%[1]d个扇区位置。\x02已连接到Yuga" +
-	"byte。模式是当前的。\x02在数据库中启用扇区索引。\x02编码config.toml时出错：%[1]s\x02按回车键更新 %[1]s 以" +
-	"包含 Yugabyte 信息。在进行更改之前，将在该文件夹中写入备份文件。\x02扩展路径时出错：%[1]s\x02读取config.tom" +
-	"l文件模式时出错：%[1]s\x02创建备份文件时出错：%[1]s\x02读取 config.toml 时出错：%[1]s\x02写入备份文件时" +
-	"出错：%[1]s\x02关闭备份文件时出错：%[1]s\x02写入config.toml时出错：%[1]s\x04\x00\x01 \x1b" +
-	"\x02重新启动Lotus Miner。\x02已连接到Yugabyte\x02开始之前，请确保您的密封管道已排空并关闭lotus-miner。" +
-	"\x02选择您的lotus-miner配置目录的位置？\x02其他\x02输入%[1]s使用的配置目录的路径\x04\x00\x01 \x1f" +
-	"\x02未提供路径，放弃迁移\x02无法读取提供的目录中的config.toml文件，错误：%[1]s\x02无法从目录创建repo：%[1]s" +
-	"。 中止迁移\x02无法锁定矿工repo。 您的矿工必须停止：%[1]s\x0a 中止迁移\x02读取矿工配置\x04\x00\x01" +
-	"\x0a\x15\x02步骤完成：%[1]s\x02初始化新的矿工角色。\x02输入创建新矿工所需的信息\x02所有者地址：%[1]s\x02工" +
-	"作地址：%[1]s\x02发送者地址：%[1]s\x02扇区大小: %[1]d\x02置信度时期: %[1]d\x02继续验证地址并创建新的" +
-	"矿工角色。\x04\x00\x01  \x02矿工创建错误发生: %[1]s\x02输入所有者地址\x02未提供地址\x02解析地址失败: " +
-	"%[1]s\x02输入 %[1]s 地址\x02输入扇区大小\x02未提供值\x02解析扇区大小失败: %[1]s\x02置信度时期\x02解析" +
-	"置信度失败: %[1]s\x02创建矿工角色失败: %[1]s\x02矿工 %[1]s 创建成功\x02无法访问数据库: %[1]s\x02" +
-	"连接到完整节点 API 时发生错误: %[1]s\x02预初始化步骤完成\x02生成密码的随机字节失败: %[1]s\x02请不要再次运行引" +
-	"导设置，因为矿工创建不是幂等的。 您需要运行 'curio config new-cluster %[1]s' 来完成配置。\x02无法获取" +
-	" FullNode 的 API 信息: %[1]w\x02无法验证来自守护进程节点的授权令牌: %[1]s\x02无法生成默认配置: %[1]s" +
-	"\x02无法将 'base' 配置层插入数据库: %[1]s\x02配置 'base' 已更新以包含此矿工的地址\x02从数据库加载基本配置失败" +
-	"：%[1]s\x02解析基本配置失败：%[1]s\x02重新生成基本配置失败: %[1]s\x02输入连接到您的Yugabyte数据库安装的" +
-	"信息（https://download.yugabyte.com/）\x02主机：%[1]s\x02端口：%[1]s\x02用户名：%[1]" +
-	"s\x02密码：%[1]s\x02数据库：%[1]s\x02继续连接和更新架构。\x04\x00\x01 3\x02发生数据库配置错误，放弃迁移" +
-	"：%[1]s\x02输入Yugabyte数据库主机（S）\x02未提供主机\x02输入Yugabyte数据库 %[1]s\x02连接到Yug" +
-	"abyte数据库时出错：%[1]s\x02'base'配置已更新，包括该矿工的地址（%[1]s）及其钱包设置。\x02比较配置%[1]s和%[2" +
-	"]s。矿工ID之间除了钱包地址的变化应该是需要的运行者的一个新的、最小的层。\x02'base'配置已创建，以类似于这个lotus-miner的" +
-	"config.toml。\x04\x00\x01 \x15\x02层%[1]s已创建。\x04\x00\x01 \x13\x02要使用配置：" +
-	"\x02运行Curio：使用机器或cgroup隔离，使用命令（附带示例层选择）："
+	"出错：%[1]s\x02发现无法迁移的扇区。您想要继续吗？\x02是的，继续\x02不，中止\x02中止迁移。\x02保存配置到层时出错：%" +
+	"[1]s。正在中止迁移\x02Curio 团队希望改进您使用的软件。告诉团队您正在使用 `%[1]s`。\x02选择您想与Curio团队分享的内" +
+	"容。\x02个人数据：矿工 ID，Curio 版本，链（%[1]s 或 %[2]s）。签名。\x02聚合-匿名：版本，链和矿工算力（分桶）。" +
+	"\x02提示：我是在任何链上运行 Curio 的人。\x02没有。\x02获取矿工功率时出错：%[1]s\x02整理消息时出错：%[1]s" +
+	"\x02获取矿工信息时出错：%[1]s\x02签署消息时出错：%[1]s\x02发送消息时出错：%[1]s\x04\x00\x01 0\x02发" +
+	"送消息时出错：状态%[1]s，消息：\x02消息已发送。\x04\x00\x01 \x0a\x02文档：\x02'%[1]s'层存储通用配置" +
+	"。所有Curio实例都可以在其%[2]s参数中包含它。\x02您可以添加其他层进行每台机器的配置更改。\x02Filecoin %[1]s " +
+	"频道：%[2]s 和 %[3]s\x02通过冗余增加可靠性：使用至少后层启动多台机器：'curio run --layers=post'" +
+	"\x02一个数据库可以服务多个矿工ID：为每个lotus-miner运行迁移。\x02请立即启动（或重新启动）%[1]s，因为数据库凭据已在%[" +
+	"2]s中。\x02等待%[1]s将扇区写入Yugabyte。\x02解释矿工ID时出错：%[1]s：ID：%[2]s\x02验证扇区时出错：%[" +
+	"1]s\x02扇区在数据库中。数据库已准备好用于%[1]s。\x02现在关闭lotus-miner和lotus-worker，改为使用%[1]s" +
+	"运行。\x02按回车继续\x02扇区已验证。发现了%[1]d个扇区位置。\x02已连接到Yugabyte。模式是当前的。\x02在数据库中启" +
+	"用扇区索引。\x02编码config.toml时出错：%[1]s\x02按回车键更新 %[1]s 以包含 Yugabyte 信息。在进行更改" +
+	"之前，将在该文件夹中写入备份文件。\x02扩展路径时出错：%[1]s\x02读取config.toml文件模式时出错：%[1]s\x02创建" +
+	"备份文件时出错：%[1]s\x02读取 config.toml 时出错：%[1]s\x02写入备份文件时出错：%[1]s\x02关闭备份文件" +
+	"时出错：%[1]s\x02写入config.toml时出错：%[1]s\x04\x00\x01 \x1b\x02重新启动Lotus Mine" +
+	"r。\x02已连接到Yugabyte\x02开始之前，请确保您的密封管道已排空并关闭lotus-miner。\x02选择您的lotus-mine" +
+	"r配置目录的位置？\x02其他\x02输入%[1]s使用的配置目录的路径\x04\x00\x01 \x1f\x02未提供路径，放弃迁移\x02无" +
+	"法读取提供的目录中的config.toml文件，错误：%[1]s\x02无法从目录创建repo：%[1]s。 中止迁移\x02无法锁定矿工r" +
+	"epo。 您的矿工必须停止：%[1]s\x0a 中止迁移\x02读取矿工配置\x04\x00\x01\x0a\x15\x02步骤完成：%[1]s" +
+	"\x02初始化新的矿工角色。\x02输入创建新矿工所需的信息\x02所有者地址：%[1]s\x02工作地址：%[1]s\x02发送者地址：%[1" +
+	"]s\x02扇区大小: %[1]d\x02置信度时期: %[1]d\x02继续验证地址并创建新的矿工角色。\x04\x00\x01  \x02矿" +
+	"工创建错误发生: %[1]s\x02输入所有者地址\x02未提供地址\x02解析地址失败: %[1]s\x02输入 %[1]s 地址\x02" +
+	"输入扇区大小\x02未提供值\x02解析扇区大小失败: %[1]s\x02置信度时期\x02解析置信度失败: %[1]s\x02创建矿工角色" +
+	"失败: %[1]s\x02矿工 %[1]s 创建成功\x02无法访问数据库: %[1]s\x02连接到完整节点 API 时发生错误: %[1" +
+	"]s\x02预初始化步骤完成\x02生成密码的随机字节失败: %[1]s\x02请不要再次运行引导设置，因为矿工创建不是幂等的。 您需要运行 '" +
+	"curio config new-cluster %[1]s' 来完成配置。\x02无法获取 FullNode 的 API 信息: %[1]w" +
+	"\x02无法验证来自守护进程节点的授权令牌: %[1]s\x02无法生成默认配置: %[1]s\x02无法将 'base' 配置层插入数据库: " +
+	"%[1]s\x02配置 'base' 已更新以包含此矿工的地址\x02从数据库加载基本配置失败：%[1]s\x02解析基本配置失败：%[1]s" +
+	"\x02重新生成基本配置失败: %[1]s\x02输入连接到您的Yugabyte数据库安装的信息（https://download.yugaby" +
+	"te.com/）\x02主机：%[1]s\x02端口：%[1]s\x02用户名：%[1]s\x02密码：%[1]s\x02数据库：%[1]s" +
+	"\x02继续连接和更新架构。\x04\x00\x01 3\x02发生数据库配置错误，放弃迁移：%[1]s\x02输入Yugabyte数据库主机（" +
+	"S）\x02未提供主机\x02输入Yugabyte数据库 %[1]s\x02连接到Yugabyte数据库时出错：%[1]s\x02正在迁移%[1" +
+	"]d个扇区的元数据。\x02'base'配置已更新，包括该矿工的地址（%[1]s）及其钱包设置。\x02比较配置%[1]s和%[2]s。矿工ID" +
+	"之间除了钱包地址的变化应该是需要的运行者的一个新的、最小的层。\x02'base'配置已创建，以类似于这个lotus-miner的confi" +
+	"g.toml。\x04\x00\x01 \x15\x02层%[1]s已创建。\x04\x00\x01 \x13\x02要使用配置：\x02运行C" +
+	"urio：使用机器或cgroup隔离，使用命令（附带示例层选择）："
 
-	// Total table size 20243 bytes (19KiB); checksum: AB52E150
+	// Total table size 20695 bytes (20KiB); checksum: BB5CCE20
diff --git a/cmd/curio/internal/translations/locales/en/out.gotext.json b/cmd/curio/internal/translations/locales/en/out.gotext.json
index 6046786220d..86b84e9a7ab 100644
--- a/cmd/curio/internal/translations/locales/en/out.gotext.json
+++ b/cmd/curio/internal/translations/locales/en/out.gotext.json
@@ -187,6 +187,44 @@
             ],
             "fuzzy": true
         },
+        {
+            "id": "Unmigratable sectors found. Do you want to continue?",
+            "message": "Unmigratable sectors found. Do you want to continue?",
+            "translation": "Unmigratable sectors found. Do you want to continue?",
+            "translatorComment": "Copied from source.",
+            "fuzzy": true
+        },
+        {
+            "id": "Yes, continue",
+            "message": "Yes, continue",
+            "translation": "Yes, continue",
+            "translatorComment": "Copied from source.",
+            "fuzzy": true
+        },
+        {
+            "id": "No, abort",
+            "message": "No, abort",
+            "translation": "No, abort",
+            "translatorComment": "Copied from source.",
+            "fuzzy": true
+        },
+        {
+            "id": "Aborting migration.",
+            "message": "Aborting migration.",
+            "translation": "Aborting migration.",
+            "translatorComment": "Copied from source.",
+            "placeholders": [
+                {
+                    "id": "Error",
+                    "string": "%[1]v",
+                    "type": "string",
+                    "underlyingType": "string",
+                    "argNum": 1,
+                    "expr": "err.Error()"
+                }
+            ],
+            "fuzzy": true
+        },
         {
             "id": "Error saving config to layer: {Error}. Aborting Migration",
             "message": "Error saving config to layer: {Error}. Aborting Migration",
@@ -602,13 +640,6 @@
             "translatorComment": "Copied from source.",
             "fuzzy": true
         },
-        {
-            "id": "Aborting migration.",
-            "message": "Aborting migration.",
-            "translation": "Aborting migration.",
-            "translatorComment": "Copied from source.",
-            "fuzzy": true
-        },
         {
             "id": "Sectors verified. {I} sector locations found.",
             "message": "Sectors verified. {I} sector locations found.",
@@ -1552,6 +1583,23 @@
             ],
             "fuzzy": true
         },
+        {
+            "id": "Migrating metadata for {NSectors} sectors.",
+            "message": "Migrating metadata for {NSectors} sectors.",
+            "translation": "Migrating metadata for {NSectors} sectors.",
+            "translatorComment": "Copied from source.",
+            "placeholders": [
+                {
+                    "id": "NSectors",
+                    "string": "%[1]d",
+                    "type": "int",
+                    "underlyingType": "int",
+                    "argNum": 1,
+                    "expr": "nSectors"
+                }
+            ],
+            "fuzzy": true
+        },
         {
             "id": "Configuration 'base' was updated to include this miner's address ({MinerAddress}) and its wallet setup.",
             "message": "Configuration 'base' was updated to include this miner's address ({MinerAddress}) and its wallet setup.",
diff --git a/cmd/curio/internal/translations/locales/ko/messages.gotext.json b/cmd/curio/internal/translations/locales/ko/messages.gotext.json
index bac1140e8e0..15732f0c291 100644
--- a/cmd/curio/internal/translations/locales/ko/messages.gotext.json
+++ b/cmd/curio/internal/translations/locales/ko/messages.gotext.json
@@ -1101,6 +1101,30 @@
             "translation": "'base' 설정이 이 lotus-miner의 config.toml과 유사하게 만들어졌습니다.",
             "message": "Configuration 'base' was created to resemble this lotus-miner's config.toml .",
             "placeholder": null
+        },
+        {
+            "id": "Unmigratable sectors found. Do you want to continue?",
+            "translation": "이동할 수 없는 섹터가 발견되었습니다. 계속하시겠습니까?",
+            "message": "Unmigratable sectors found. Do you want to continue?",
+            "placeholder": null
+        },
+        {
+            "id": "Yes, continue",
+            "translation": "예, 계속",
+            "message": "Yes, continue",
+            "placeholder": null
+        },
+        {
+            "id": "No, abort",
+            "translation": "아니오, 중단",
+            "message": "No, abort",
+            "placeholder": null
+        },
+        {
+            "id": "Migrating metadata for {NSectors} sectors.",
+            "translation": "{NSectors} 섹터의 메타데이터를 이동 중입니다.",
+            "message": "Migrating metadata for {NSectors} sectors.",
+            "placeholder": null
         }
     ]
 }
\ No newline at end of file
diff --git a/cmd/curio/internal/translations/locales/zh/messages.gotext.json b/cmd/curio/internal/translations/locales/zh/messages.gotext.json
index 1e2608fa8d7..f2121448425 100644
--- a/cmd/curio/internal/translations/locales/zh/messages.gotext.json
+++ b/cmd/curio/internal/translations/locales/zh/messages.gotext.json
@@ -1071,6 +1071,30 @@
       "translation": "'base'配置已创建，以类似于这个lotus-miner的config.toml。",
       "message": "Configuration 'base' was created to resemble this lotus-miner's config.toml .",
       "placeholder": null
+    },
+    {
+      "id": "Unmigratable sectors found. Do you want to continue?",
+      "translation": "发现无法迁移的扇区。您想要继续吗？",
+      "message": "Unmigratable sectors found. Do you want to continue?",
+      "placeholder": null
+    },
+    {
+      "id": "Yes, continue",
+      "translation": "是的，继续",
+      "message": "Yes, continue",
+      "placeholder": null
+    },
+    {
+      "id": "No, abort",
+      "translation": "不，中止",
+      "message": "No, abort",
+      "placeholder": null
+    },
+    {
+      "id": "Migrating metadata for {NSectors} sectors.",
+      "translation": "正在迁移{NSectors}个扇区的元数据。",
+      "message": "Migrating metadata for {NSectors} sectors.",
+      "placeholder": null
     }
   ]
 }
\ No newline at end of file
diff --git a/cmd/curio/tasks/tasks.go b/cmd/curio/tasks/tasks.go
index fde13c33659..c59d792f209 100644
--- a/cmd/curio/tasks/tasks.go
+++ b/cmd/curio/tasks/tasks.go
@@ -16,6 +16,7 @@ import (
 
 	"github.com/filecoin-project/lotus/cmd/curio/deps"
 	curio "github.com/filecoin-project/lotus/curiosrc"
+	"github.com/filecoin-project/lotus/curiosrc/alertmanager"
 	"github.com/filecoin-project/lotus/curiosrc/chainsched"
 	"github.com/filecoin-project/lotus/curiosrc/ffi"
 	"github.com/filecoin-project/lotus/curiosrc/gc"
@@ -144,6 +145,9 @@ func StartTasks(ctx context.Context, dependencies *deps.Deps) (*harmonytask.Task
 		activeTasks = append(activeTasks, storageEndpointGcTask)
 	}
 
+	amTask := alertmanager.NewAlertTask(full, db, cfg.Alerting)
+	activeTasks = append(activeTasks, amTask)
+
 	if needProofParams {
 		for spt := range dependencies.ProofTypes {
 			if err := modules.GetParams(true)(spt); err != nil {
diff --git a/curiosrc/alertmanager/alerts.go b/curiosrc/alertmanager/alerts.go
new file mode 100644
index 00000000000..20cfaf83fa7
--- /dev/null
+++ b/curiosrc/alertmanager/alerts.go
@@ -0,0 +1,332 @@
+package alertmanager
+
+import (
+	"database/sql"
+	"fmt"
+	"strings"
+
+	"github.com/BurntSushi/toml"
+	"github.com/dustin/go-humanize"
+	"golang.org/x/xerrors"
+
+	"github.com/filecoin-project/go-address"
+	"github.com/filecoin-project/go-state-types/abi"
+	"github.com/filecoin-project/go-state-types/big"
+
+	"github.com/filecoin-project/lotus/node/config"
+)
+
+// balanceCheck retrieves the machine details from the database and performs balance checks on unique addresses.
+// It populates the alert map with any errors encountered during the process and with any alerts related to low wallet balance and missing wallets.
+// The alert map key is "Balance Check".
+// It queries the database for the configuration of each layer and decodes it using the toml.Decode function.
+// It then iterates over the addresses in the configuration and curates a list of unique addresses.
+// If an address is not found in the chain node, it adds an alert to the alert map.
+// If the balance of an address is below MinimumWalletBalance, it adds an alert to the alert map.
+// If there are any errors encountered during the process, the err field of the alert map is populated.
+func balanceCheck(al *alerts) {
+	Name := "Balance Check"
+	al.alertMap[Name] = &alertOut{}
+
+	var ret string
+
+	uniqueAddrs, _, err := al.getAddresses()
+	if err != nil {
+		al.alertMap[Name].err = err
+		return
+	}
+
+	for _, addrStr := range uniqueAddrs {
+		addr, err := address.NewFromString(addrStr)
+		if err != nil {
+			al.alertMap[Name].err = xerrors.Errorf("failed to parse address: %w", err)
+			return
+		}
+
+		has, err := al.api.WalletHas(al.ctx, addr)
+		if err != nil {
+			al.alertMap[Name].err = err
+			return
+		}
+
+		if !has {
+			ret += fmt.Sprintf("Wallet %s was not found in chain node. ", addrStr)
+		}
+
+		balance, err := al.api.WalletBalance(al.ctx, addr)
+		if err != nil {
+			al.alertMap[Name].err = err
+		}
+
+		if abi.TokenAmount(al.cfg.MinimumWalletBalance).GreaterThanEqual(balance) {
+			ret += fmt.Sprintf("Balance for wallet %s is below 5 Fil. ", addrStr)
+		}
+	}
+	if ret != "" {
+		al.alertMap[Name].alertString = ret
+	}
+	return
+}
+
+// taskFailureCheck retrieves the task failure counts from the database for a specific time period.
+// It then checks for specific sealing tasks and tasks with more than 5 failures to generate alerts.
+func taskFailureCheck(al *alerts) {
+	Name := "TaskFailures"
+	al.alertMap[Name] = &alertOut{}
+
+	type taskFailure struct {
+		Machine  string `db:"completed_by_host_and_port"`
+		Name     string `db:"name"`
+		Failures int    `db:"failed_tasks_count"`
+	}
+
+	var taskFailures []taskFailure
+
+	err := al.db.Select(al.ctx, &taskFailures, `
+								SELECT completed_by_host_and_port, name, COUNT(*) AS failed_count
+								FROM harmony_task_history
+								WHERE result = FALSE
+								  AND work_end >= NOW() - $1::interval
+								GROUP BY completed_by_host_and_port, name
+								ORDER BY completed_by_host_and_port, name;`, fmt.Sprintf("%f Minutes", AlertMangerInterval.Minutes()))
+	if err != nil {
+		al.alertMap[Name].err = xerrors.Errorf("getting failed task count: %w", err)
+		return
+	}
+
+	mmap := make(map[string]int)
+	tmap := make(map[string]int)
+
+	if len(taskFailures) > 0 {
+		for _, tf := range taskFailures {
+			_, ok := tmap[tf.Name]
+			if !ok {
+				tmap[tf.Name] = tf.Failures
+			} else {
+				tmap[tf.Name] += tf.Failures
+			}
+			_, ok = mmap[tf.Machine]
+			if !ok {
+				mmap[tf.Machine] = tf.Failures
+			} else {
+				mmap[tf.Machine] += tf.Failures
+			}
+		}
+	}
+
+	sealingTasks := []string{"SDR", "TreeD", "TreeRC", "PreCommitSubmit", "PoRep", "Finalize", "MoveStorage", "CommitSubmit", "WdPost", "ParkPiece"}
+	contains := func(s []string, e string) bool {
+		for _, a := range s {
+			if a == e {
+				return true
+			}
+		}
+		return false
+	}
+
+	// Alerts for any sealing pipeline failures. Other tasks should have at least 5 failures for an alert
+	for name, count := range tmap {
+		if contains(sealingTasks, name) {
+			al.alertMap[Name].alertString += fmt.Sprintf("Task: %s, Failures: %d. ", name, count)
+		}
+		if count > 5 {
+			al.alertMap[Name].alertString += fmt.Sprintf("Task: %s, Failures: %d. ", name, count)
+		}
+	}
+
+	// Alert if a machine failed more than 5 tasks
+	for name, count := range tmap {
+		if count > 5 {
+			al.alertMap[Name].alertString += fmt.Sprintf("Machine: %s, Failures: %d. ", name, count)
+		}
+	}
+
+	return
+}
+
+// permanentStorageCheck retrieves the storage details from the database and checks if there is sufficient space for sealing sectors.
+// It queries the database for the available storage for all storage paths that can store data.
+// It queries the database for sectors being sealed that have not been finalized yet.
+// For each sector, it calculates the required space for sealing based on the sector size.
+// It checks if there is enough available storage for each sector and updates the sectorMap accordingly.
+// If any sectors are unaccounted for, it calculates the total missing space and adds an alert to the alert map.
+func permanentStorageCheck(al *alerts) {
+	Name := "PermanentStorageSpace"
+	// Get all storage path for permanent storages
+	type storage struct {
+		ID        string `db:"storage_id"`
+		Available int64  `db:"available"`
+	}
+
+	var storages []storage
+
+	err := al.db.Select(al.ctx, &storages, `
+								SELECT storage_id, available
+								FROM storage_path
+								WHERE can_store = TRUE;`)
+	if err != nil {
+		al.alertMap[Name].err = xerrors.Errorf("getting storage details: %w", err)
+		return
+	}
+
+	type sector struct {
+		Miner  abi.ActorID             `db:"sp_id"`
+		Number abi.SectorNumber        `db:"sector_number"`
+		Proof  abi.RegisteredSealProof `db:"reg_seal_proof"`
+	}
+
+	var sectors []sector
+
+	err = al.db.Select(al.ctx, &sectors, `
+								SELECT sp_id, sector_number, reg_seal_proof
+								FROM sectors_sdr_pipeline
+								WHERE after_move_storage = FALSE;`)
+	if err != nil {
+		al.alertMap[Name].err = xerrors.Errorf("getting sectors being sealed: %w", err)
+		return
+	}
+
+	type sm struct {
+		s    sector
+		size int64
+	}
+
+	sectorMap := make(map[sm]bool)
+
+	for _, sec := range sectors {
+		space := int64(0)
+		sec := sec
+		sectorSize, err := sec.Proof.SectorSize()
+		if err != nil {
+			space = int64(64<<30)*2 + int64(200<<20) // Assume 64 GiB sector
+		} else {
+			space = int64(sectorSize)*2 + int64(200<<20) // sealed + unsealed + cache
+		}
+
+		key := sm{s: sec, size: space}
+
+		sectorMap[key] = false
+
+		for _, strg := range storages {
+			if space > strg.Available {
+				strg.Available -= space
+				sectorMap[key] = true
+			}
+		}
+	}
+
+	missingSpace := big.NewInt(0)
+	for sec, accounted := range sectorMap {
+		if !accounted {
+			big.Add(missingSpace, big.NewInt(sec.size))
+		}
+	}
+
+	if missingSpace.GreaterThan(big.NewInt(0)) {
+		al.alertMap[Name].alertString = fmt.Sprintf("Insufficient storage space for sealing sectors. Additional %s required.", humanize.Bytes(missingSpace.Uint64()))
+	}
+}
+
+// getAddresses retrieves machine details from the database, stores them in an array and compares layers for uniqueness.
+// It employs addrMap to handle unique addresses, and generated slices for configuration fields and MinerAddresses.
+// The function iterates over layers, storing decoded configuration and verifying address existence in addrMap.
+// It ends by returning unique addresses and miner slices.
+func (al *alerts) getAddresses() ([]string, []string, error) {
+	// MachineDetails represents the structure of data received from the SQL query.
+	type machineDetail struct {
+		ID          int
+		HostAndPort string
+		Layers      string
+	}
+	var machineDetails []machineDetail
+
+	// Get all layers in use
+	err := al.db.Select(al.ctx, &machineDetails, `
+				SELECT m.id, m.host_and_port, d.layers
+				FROM harmony_machines m
+				LEFT JOIN harmony_machine_details d ON m.id = d.machine_id;`)
+	if err != nil {
+		return nil, nil, xerrors.Errorf("getting config layers for all machines: %w", err)
+	}
+
+	// UniqueLayers takes an array of MachineDetails and returns a slice of unique layers.
+
+	layerMap := make(map[string]bool)
+	var uniqueLayers []string
+
+	// Get unique layers in use
+	for _, machine := range machineDetails {
+		machine := machine
+		// Split the Layers field into individual layers
+		layers := strings.Split(machine.Layers, ",")
+		for _, layer := range layers {
+			layer = strings.TrimSpace(layer)
+			if _, exists := layerMap[layer]; !exists && layer != "" {
+				layerMap[layer] = true
+				uniqueLayers = append(uniqueLayers, layer)
+			}
+		}
+	}
+
+	addrMap := make(map[string]bool)
+	var uniqueAddrs []string
+	var miners []string
+
+	// Get all unique addresses
+	for _, layer := range uniqueLayers {
+		text := ""
+		cfg := config.DefaultCurioConfig()
+		err := al.db.QueryRow(al.ctx, `SELECT config FROM harmony_config WHERE title=$1`, layer).Scan(&text)
+		if err != nil {
+			if strings.Contains(err.Error(), sql.ErrNoRows.Error()) {
+				return nil, nil, xerrors.Errorf("missing layer '%s' ", layer)
+			}
+			return nil, nil, fmt.Errorf("could not read layer '%s': %w", layer, err)
+		}
+
+		_, err = toml.Decode(text, cfg)
+		if err != nil {
+			return nil, nil, fmt.Errorf("could not read layer, bad toml %s: %w", layer, err)
+		}
+
+		for i := range cfg.Addresses {
+			prec := cfg.Addresses[i].PreCommitControl
+			com := cfg.Addresses[i].CommitControl
+			term := cfg.Addresses[i].TerminateControl
+			miner := cfg.Addresses[i].MinerAddresses
+			if prec != nil {
+				for j := range prec {
+					if _, ok := addrMap[prec[j]]; !ok && prec[j] != "" {
+						addrMap[prec[j]] = true
+						uniqueAddrs = append(uniqueAddrs, prec[j])
+					}
+				}
+			}
+			if com != nil {
+				for j := range com {
+					if _, ok := addrMap[com[j]]; !ok && com[j] != "" {
+						addrMap[com[j]] = true
+						uniqueAddrs = append(uniqueAddrs, com[j])
+					}
+				}
+			}
+			if term != nil {
+				for j := range term {
+					if _, ok := addrMap[term[j]]; !ok && term[j] != "" {
+						addrMap[term[j]] = true
+						uniqueAddrs = append(uniqueAddrs, term[j])
+					}
+				}
+			}
+			if miner != nil {
+				for j := range miner {
+					if _, ok := addrMap[miner[j]]; !ok && miner[j] != "" {
+						addrMap[miner[j]] = true
+						miners = append(miners, miner[j])
+					}
+				}
+			}
+		}
+	}
+	return uniqueAddrs, miners, nil
+}
diff --git a/curiosrc/alertmanager/task_alert.go b/curiosrc/alertmanager/task_alert.go
new file mode 100644
index 00000000000..0de61b0cbed
--- /dev/null
+++ b/curiosrc/alertmanager/task_alert.go
@@ -0,0 +1,227 @@
+// Nobody associated with this software's development has any business relationship to pagerduty.
+// This is provided as a convenient trampoline to SP's alert system of choice.
+
+package alertmanager
+
+import (
+	"bytes"
+	"context"
+	"encoding/json"
+	"fmt"
+	"io"
+	"net/http"
+	"time"
+
+	logging "github.com/ipfs/go-log/v2"
+	"golang.org/x/xerrors"
+
+	"github.com/filecoin-project/go-address"
+
+	"github.com/filecoin-project/lotus/api"
+	"github.com/filecoin-project/lotus/chain/types"
+	"github.com/filecoin-project/lotus/lib/harmony/harmonydb"
+	"github.com/filecoin-project/lotus/lib/harmony/harmonytask"
+	"github.com/filecoin-project/lotus/lib/harmony/resources"
+	"github.com/filecoin-project/lotus/node/config"
+	"github.com/filecoin-project/lotus/storage/ctladdr"
+)
+
+const AlertMangerInterval = time.Hour
+
+var log = logging.Logger("curio/alertmanager")
+
+type AlertAPI interface {
+	ctladdr.NodeApi
+	StateMinerInfo(ctx context.Context, actor address.Address, tsk types.TipSetKey) (api.MinerInfo, error)
+}
+
+type AlertTask struct {
+	api AlertAPI
+	cfg config.CurioAlerting
+	db  *harmonydb.DB
+}
+
+type alertOut struct {
+	err         error
+	alertString string
+}
+
+type alerts struct {
+	ctx      context.Context
+	api      AlertAPI
+	db       *harmonydb.DB
+	cfg      config.CurioAlerting
+	alertMap map[string]*alertOut
+}
+
+type pdPayload struct {
+	Summary       string      `json:"summary"`
+	Severity      string      `json:"severity"`
+	Source        string      `json:"source"`
+	Component     string      `json:"component,omitempty"`
+	Group         string      `json:"group,omitempty"`
+	Class         string      `json:"class,omitempty"`
+	CustomDetails interface{} `json:"custom_details,omitempty"`
+}
+
+type alertFunc func(al *alerts)
+
+var alertFuncs = []alertFunc{
+	balanceCheck,
+	taskFailureCheck,
+	permanentStorageCheck,
+}
+
+func NewAlertTask(api AlertAPI, db *harmonydb.DB, alertingCfg config.CurioAlerting) *AlertTask {
+	return &AlertTask{
+		api: api,
+		db:  db,
+		cfg: alertingCfg,
+	}
+}
+
+func (a *AlertTask) Do(taskID harmonytask.TaskID, stillOwned func() bool) (done bool, err error) {
+	if a.cfg.PageDutyIntegrationKey == "" {
+		log.Warnf("PageDutyIntegrationKey is empty, not sending an alert")
+		return true, nil
+	}
+
+	ctx := context.Background()
+
+	alMap := make(map[string]*alertOut)
+
+	altrs := &alerts{
+		ctx:      ctx,
+		api:      a.api,
+		db:       a.db,
+		cfg:      a.cfg,
+		alertMap: alMap,
+	}
+
+	for _, al := range alertFuncs {
+		al(altrs)
+	}
+
+	details := make(map[string]interface{})
+
+	for k, v := range altrs.alertMap {
+		if v != nil {
+			if v.err != nil {
+				details[k] = v.err.Error()
+				continue
+			}
+			if v.alertString != "" {
+				details[k] = v.alertString
+			}
+		}
+	}
+
+	// Alert only if required
+	if len(details) > 0 {
+		payloadData := &pdPayload{
+			Summary:       "Curio Alert",
+			Severity:      "critical",
+			CustomDetails: details,
+			Source:        "Curio Cluster",
+		}
+
+		err = a.sendAlert(payloadData)
+
+		if err != nil {
+			return false, err
+		}
+	}
+
+	return true, nil
+
+}
+
+func (a *AlertTask) CanAccept(ids []harmonytask.TaskID, engine *harmonytask.TaskEngine) (*harmonytask.TaskID, error) {
+	id := ids[0]
+	return &id, nil
+}
+
+func (a *AlertTask) TypeDetails() harmonytask.TaskTypeDetails {
+	return harmonytask.TaskTypeDetails{
+		Max:  1,
+		Name: "AlertManager",
+		Cost: resources.Resources{
+			Cpu: 1,
+			Ram: 64 << 20,
+			Gpu: 0,
+		},
+		IAmBored: harmonytask.SingletonTaskAdder(AlertMangerInterval, a),
+	}
+}
+
+func (a *AlertTask) Adder(taskFunc harmonytask.AddTaskFunc) {
+	return
+}
+
+var _ harmonytask.TaskInterface = &AlertTask{}
+
+// sendAlert sends an alert to PagerDuty with the provided payload data.
+// It creates a PDData struct with the provided routing key, event action and payload.
+// It creates an HTTP POST request with the PagerDuty event URL as the endpoint and the marshaled JSON data as the request body.
+// It sends the request using an HTTP client with a maximum of 5 retries for network errors with exponential backoff before each retry.
+// It handles different HTTP response status codes and returns an error based on the status code().
+// If all retries fail, it returns an error indicating the last network error encountered.
+func (a *AlertTask) sendAlert(data *pdPayload) error {
+
+	type pdData struct {
+		RoutingKey  string     `json:"routing_key"`
+		EventAction string     `json:"event_action"`
+		Payload     *pdPayload `json:"payload"`
+	}
+
+	payload := &pdData{
+		RoutingKey:  a.cfg.PageDutyIntegrationKey,
+		EventAction: "trigger",
+		Payload:     data,
+	}
+
+	jsonData, err := json.Marshal(payload)
+	if err != nil {
+		return fmt.Errorf("error marshaling JSON: %w", err)
+	}
+
+	req, err := http.NewRequest("POST", a.cfg.PagerDutyEventURL, bytes.NewBuffer(jsonData))
+	if err != nil {
+		return fmt.Errorf("error creating request: %w", err)
+	}
+	req.Header.Set("Content-Type", "application/json")
+
+	client := &http.Client{}
+	var resp *http.Response
+
+	for i := 0; i < 5; i++ { // Maximum of 5 retries
+		resp, err = client.Do(req)
+		if err != nil {
+			time.Sleep(time.Duration(2*i) * time.Second) // Exponential backoff
+			continue
+		}
+		defer func() { _ = resp.Body.Close() }()
+
+		switch resp.StatusCode {
+		case 202:
+			log.Debug("Accepted: The event has been accepted by PagerDuty.")
+			return nil
+		case 400:
+			bd, rerr := io.ReadAll(resp.Body)
+			if rerr != nil {
+				return xerrors.Errorf("Bad request: payload JSON is invalid. Failed to read the body: %w", err)
+			}
+			return xerrors.Errorf("Bad request: payload JSON is invalid %s", string(bd))
+		case 429:
+			log.Debug("Too many API calls, retrying after backoff...")
+			time.Sleep(time.Duration(5*i) * time.Second) // Exponential backoff
+		case 500, 501, 502, 503, 504:
+			log.Debug("Server error, retrying after backoff...")
+			time.Sleep(time.Duration(5*i) * time.Second) // Exponential backoff
+		default:
+			log.Errorw("Response status:", resp.Status)
+			return xerrors.Errorf("Unexpected HTTP response: %s", resp.Status)
+		}
+	}
+	return fmt.Errorf("after retries, last error: %w", err)
+}
diff --git a/documentation/en/default-curio-config.toml b/documentation/en/default-curio-config.toml
index 7bf34d3567e..8f5efcac118 100644
--- a/documentation/en/default-curio-config.toml
+++ b/documentation/en/default-curio-config.toml
@@ -364,3 +364,24 @@
   # type: string
   #StorageRPCSecret = ""
 
+
+[Alerting]
+  # PagerDutyEventURL is URL for PagerDuty.com Events API v2 URL. Events sent to this API URL are ultimately
+  # routed to a PagerDuty.com service and processed.
+  # The default is sufficient for integration with the stock commercial PagerDuty.com company's service.
+  #
+  # type: string
+  #PagerDutyEventURL = "https://events.pagerduty.com/v2/enqueue"
+
+  # PageDutyIntegrationKey is the integration key for a PagerDuty.com service. You can find this unique service
+  # identifier in the integration page for the service.
+  #
+  # type: string
+  #PageDutyIntegrationKey = ""
+
+  # MinimumWalletBalance is the minimum balance all active wallets. If the balance is below this value, an
+  # alerts will be triggered for the wallet
+  #
+  # type: types.FIL
+  #MinimumWalletBalance = "5 FIL"
+
diff --git a/node/config/def.go b/node/config/def.go
index 2dd4b77eb2f..d2aa7e19859 100644
--- a/node/config/def.go
+++ b/node/config/def.go
@@ -368,5 +368,10 @@ func DefaultCurioConfig() *CurioConfig {
 			MaxQueueTrees: 0, // default don't use this limit
 			MaxQueuePoRep: 0, // default don't use this limit
 		},
+		Alerting: CurioAlerting{
+			PagerDutyEventURL:      "https://events.pagerduty.com/v2/enqueue",
+			PageDutyIntegrationKey: "",
+			MinimumWalletBalance:   types.MustParseFIL("5"),
+		},
 	}
 }
diff --git a/node/config/doc_gen.go b/node/config/doc_gen.go
index 17bc0febffa..0b6d3758443 100644
--- a/node/config/doc_gen.go
+++ b/node/config/doc_gen.go
@@ -183,6 +183,30 @@ over the worker address if this flag is set.`,
 			Comment: `MinerAddresses are the addresses of the miner actors to use for sending messages`,
 		},
 	},
+	"CurioAlerting": {
+		{
+			Name: "PagerDutyEventURL",
+			Type: "string",
+
+			Comment: `PagerDutyEventURL is URL for PagerDuty.com Events API v2 URL. Events sent to this API URL are ultimately
+routed to a PagerDuty.com service and processed.
+The default is sufficient for integration with the stock commercial PagerDuty.com company's service.`,
+		},
+		{
+			Name: "PageDutyIntegrationKey",
+			Type: "string",
+
+			Comment: `PageDutyIntegrationKey is the integration key for a PagerDuty.com service. You can find this unique service
+identifier in the integration page for the service.`,
+		},
+		{
+			Name: "MinimumWalletBalance",
+			Type: "types.FIL",
+
+			Comment: `MinimumWalletBalance is the minimum balance all active wallets. If the balance is below this value, an
+alerts will be triggered for the wallet`,
+		},
+	},
 	"CurioConfig": {
 		{
 			Name: "Subsystems",
@@ -224,6 +248,12 @@ over the worker address if this flag is set.`,
 			Name: "Apis",
 			Type: "ApisConfig",
 
+			Comment: ``,
+		},
+		{
+			Name: "Alerting",
+			Type: "CurioAlerting",
+
 			Comment: ``,
 		},
 	},
diff --git a/node/config/types.go b/node/config/types.go
index 031bdf9088f..6912839f847 100644
--- a/node/config/types.go
+++ b/node/config/types.go
@@ -77,6 +77,7 @@ type CurioConfig struct {
 	Ingest    CurioIngestConfig
 	Journal   JournalConfig
 	Apis      ApisConfig
+	Alerting  CurioAlerting
 }
 
 type ApisConfig struct {
@@ -1109,3 +1110,18 @@ type FaultReporterConfig struct {
 	// rewards. This address should have adequate funds to cover gas fees.
 	ConsensusFaultReporterAddress string
 }
+
+type CurioAlerting struct {
+	// PagerDutyEventURL is URL for PagerDuty.com Events API v2 URL. Events sent to this API URL are ultimately
+	// routed to a PagerDuty.com service and processed.
+	// The default is sufficient for integration with the stock commercial PagerDuty.com company's service.
+	PagerDutyEventURL string
+
+	// PageDutyIntegrationKey is the integration key for a PagerDuty.com service. You can find this unique service
+	// identifier in the integration page for the service.
+	PageDutyIntegrationKey string
+
+	// MinimumWalletBalance is the minimum balance all active wallets. If the balance is below this value, an
+	// alerts will be triggered for the wallet
+	MinimumWalletBalance types.FIL
+}