install-server.sh

#!/bin/bash

set -e

readonly ARGS=("$@")
readonly PROGNAME="./install-server.sh"
TRENTO_VERSION="0.8.0"

usage() {
    cat <<-EOF
    usage: $PROGNAME options

    Install Trento Server

    OPTIONS:
        -p, --private-key     Private SSH key used by the runner to connect to the hosts.
        -m, --enable-mtls     Enable mTLS secure communication between the agent and the server.
        -c, --cert            The path to the TLS certificate file. Required if --enable-mtls is set.
        -k, --key             The path to the TLS key file. Required if --enable-mtls is set.
        -a, --ca              The path to the TLS CA file. Required if --enable-mtls is set.
        -r, --rolling         Use the rolling version instead of the stable one.
        -h, --help            Print this help.

    Example:
       $PROGNAME --private-key ./id_rsa_runner
EOF
}

cmdline() {
    local arg=

    for arg; do
        local delim=""
        case "$arg" in
        --private-key) args="${args}-p " ;;
        --enable-mtls) args="${args}-m " ;;
        --cert) args="${args}-c " ;;
        --key) args="${args}-k " ;;
        --ca) args="${args}-a " ;;
        --help) args="${args}-h " ;;

        # pass through anything else
        *)
            [[ "${arg:0:1}" == "-" ]] || delim="\""
            args="${args}${delim}${arg}${delim} "
            ;;
        esac
    done

    eval set -- "$args"

    while getopts "p:c:k:a:mrh" OPTION; do
        case $OPTION in
        h)
            usage
            exit 0
            ;;

        p)
            PRIVATE_KEY=$OPTARG
            ;;

        m)
            ENABLE_MTLS=true
            ;;

        c)
            CERT=$OPTARG
            ;;

        k)
            KEY=$OPTARG
            ;;

        a)
            CA=$OPTARG
            ;;

        r)
            ROLLING=true
            ;;

        *)
            usage
            exit 0
            ;;
        esac
    done

    if [[ -z "$PRIVATE_KEY" ]]; then
        read -rp "Please provide the path of the runner private key: " PRIVATE_KEY </dev/tty
    fi

    PRIVATE_KEY=$(normalize_path "$PRIVATE_KEY") || {
        echo "Path to the private key file does not exist, please try again."
        exit 1
    }

    configure_mtls

    if [[ "$ROLLING" == "true" ]]; then
        TRENTO_VERSION="rolling"
    fi

    return 0
}

function load_conf() {
    if [ -f /etc/trento/installer.conf ]; then
        echo "Loading installer configuration"
        # shellcheck source=/dev/null
        source /etc/trento/installer.conf
    fi
}

function configure_mtls() {
    if [[ -n "$ENABLE_MTLS" ]]; then
        if [[ -z "$CERT" ]]; then
            read -rp "Please provide the TLS certificate path: " CERT </dev/tty

        fi
        CERT=$(normalize_path "$CERT") || {
            echo "Path to the TLS cert file does not exist, please try again."
            exit 1
        }

        if [[ -z "$KEY" ]]; then
            read -rp "Please provide the TLS key path: " KEY </dev/tty
        fi
        KEY=$(normalize_path "$KEY") || {
            echo "Path to the TLS key file does not exist, please try again."
            exit 1
        }

        if [[ -z "$CA" ]]; then
            read -rp "Please provide the TLS CA path: " CA </dev/tty
        fi
        CA=$(normalize_path "$CA") || {
            echo "Path to the TLS CA file does not exist, please try again."
            exit 1
        }
    fi
}

function normalize_path() {
    local path=$1
    local absolute_path

    path="${path/#\~/$HOME}"
    absolute_path=$(realpath -q -e "$path") || {
        exit 1
    }

    echo "$absolute_path"
}

check_requirements() {
    local firewalld_status
    firewalld_status="$(systemctl show -p ActiveState firewalld | cut -d'=' -f2)"
    if [ "${firewalld_status}" = "active" ]; then
        echo "firewalld must be turned off to run K3s, please disable it and try again."
        exit 1
    fi
    if ! which curl >/dev/null 2>&1; then
        echo "curl is required by this script, please install it and try again."
        exit 1
    fi
    if ! which unzip >/dev/null 2>&1; then
        echo "unzip is required by this script, please install it and try again."
        exit 1
    fi
    if grep -q "Y" /sys/module/apparmor/parameters/enabled; then
        if ! command -v /sbin/apparmor_parser >/dev/null 1>&1; then
            echo "apparmor_parser is required by k3s when using AppArmor, please install it and try again."
            exit 1
        fi
    fi
}

install_k3s() {
    echo "Installing K3s..."
    curl -sfL https://get.k3s.io | sh >/dev/null
    mkdir -p ~/.kube
    sudo cp /etc/rancher/k3s/k3s.yaml ~/.kube/config
    sudo chown "$USER": ~/.kube/config
    unset KUBECONFIG
}

install_helm() {
    echo "Installing Helm..."
    curl -s https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3 | bash >/dev/null
}

update_helm_dependencies() {
    echo "Updating Helm dependencies..."
    helm repo add bitnami https://charts.bitnami.com/bitnami >/dev/null
    helm repo update >/dev/null
}

install_trento_server_chart() {
    local download_chart=${DOWNLOAD_CHART:-true}
    local repo_owner=${TRENTO_REPO_OWNER:-"trento-project"}
    local runner_image=${TRENTO_RUNNER_IMAGE:-"ghcr.io/$repo_owner/trento-runner"}
    local web_image=${TRENTO_WEB_IMAGE:-"ghcr.io/$repo_owner/trento-web"}
    local private_key=${PRIVATE_KEY:-"./id_rsa_runner"}
    local trento_source_zip="${TRENTO_VERSION}"
    local trento_chart_path=${TRENTO_CHART_PATH:-"/tmp/trento-${trento_source_zip}/packaging/helm/trento-server"}
    local trento_packages_url="https://github.com/${repo_owner}/trento/archive/refs/tags"

    if [[ "$download_chart" == true ]]; then
        echo "Downloading trento-server chart..."
        pushd -- /tmp >/dev/null
        rm -rf trento-"${trento_source_zip}"
        rm -f ${trento_source_zip}.zip
        curl -f -sS -O -L "${trento_packages_url}/${trento_source_zip}.zip" >/dev/null
        unzip -o "${trento_source_zip}.zip" >/dev/null
        popd >/dev/null

        echo "Updating chart dependencies..."
        pushd -- "$trento_chart_path" >/dev/null
        helm dep update >/dev/null
        popd >/dev/null
    fi

    local args=(
        --set-file trento-runner.privateKey="${private_key}"
        --set trento-web.image.tag="${TRENTO_VERSION}"
        --set trento-runner.image.tag="${TRENTO_VERSION}"
        --set trento-runner.image.repository="${runner_image}"
        --set trento-web.image.repository="${web_image}"
    )
    if [[ "$ENABLE_MTLS" == "true" ]]; then
        args+=(
            --set trento-web.mTLS.enabled=true
            --set-file trento-web.mTLS.cert="${CERT}"
            --set-file trento-web.mTLS.key="${KEY}"
            --set-file trento-web.mTLS.ca="${CA}"
        )
    fi
    if [[ "$ROLLING" == "true" ]]; then
        args+=(
            --set trento-web.image.pullPolicy=Always
            --set trento-runner.image.pullPolicy=Always
        )
    fi
    HELM_EXPERIMENTAL_OCI=1 helm upgrade --install trento-server "$trento_chart_path" "${args[@]}"
}

main() {
    cmdline "${ARGS[@]}"
    load_conf
    echo "Installing trento-server on k3s..."
    check_requirements
    install_k3s
    install_helm
    update_helm_dependencies
    install_trento_server_chart
}
main