From 0b609a192b1eb2caccdfefdebfa36d059ba658b5 Mon Sep 17 00:00:00 2001 From: Valastiri Date: Mon, 11 Sep 2023 23:03:06 +0800 Subject: [PATCH] add danger admonition --- .../advanced-guides/engines/crossbleed-start.md | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/docs/pilots-corner/advanced-guides/engines/crossbleed-start.md b/docs/pilots-corner/advanced-guides/engines/crossbleed-start.md index 3e0a2c98e..bc4242a4a 100644 --- a/docs/pilots-corner/advanced-guides/engines/crossbleed-start.md +++ b/docs/pilots-corner/advanced-guides/engines/crossbleed-start.md @@ -21,6 +21,14 @@ to the ground crew and the airport infrastructure. To explain this procedure, we will assume that `ENG 1` is running, and the flight crew will start `ENG 2` using the crossbleed procedure. +!!! tip "" + !!! danger "Actual Procedure" + A crossbleed engine start normally requires an Air Start Unit to be connected to the aircraft to start the first engine. This is not currently simulated in the A32NX. + + The following procedure is included for completeness and will be updated when the feature is implemented. + + For now, you would have to start a single engine normally (`APU ON` and `APU BLEED ON`) before carrying on with a crossbleed start. + ### Initial State Before using this procedure ensure: @@ -31,11 +39,6 @@ Before using this procedure ensure: ![crossbleed1.png](../../assets/advanced-guides/engines/crossbleed1.png){loading=lazy} -!!! tip "" - Currently, the A32NX does not have the capability to air start the engines. This procedure is included for completeness and will be updated when the feature is implemented. - - For now, you would have to start a single engine normally (`APU ON` and `APU BLEED ON`) before carrying on with a crossbleed start. - ### Overhead Bleeds Configuration `ENG BLEED` for the receiving engine needs to be switched `OFF`. This is to prevent the bleed air from the running engine from escaping through the receiving engine