logi-wishbone infos and ucf file

[pentesgeorge]

Hello all,
I am new on LogiBone so i am trying the examples. I want to study wishbone communication.
I tried the wishbone project from the LogiBone and it worked.

Now i am trying to create the .bit file from the logibone-wishbone.xise.
When i opened the project it was asking for gpmc2wishbone - gpmc_wishbone_wrapper. I found the file in logi-hard-master.
The project now makes the .bit file but in my LogiBone the Led does not operates as in the predefined example.

My question is (i am sorry if it is a silly question) there is no .ucf file in the project. Do i have to include a .ucf file?
I tried with different .ucf files from the logi-hard-master folder but when i try to compile the project i get these errors:

1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.

Also i want to ask which the max speed that i can get data at the BeagleBoneBlack from the LogiBone through wishbone?

Thank you very much,
George

[jpiat]

Hi, what version of the logibone are you using ? There should be a UCF file linked in the project, but i'll check for it tonight. Regards, Jonathan Piat 2017-07-11 17:29 GMT+02:00 pentesgeorge <[email protected]>:

…

Hello all, I am new on LogiBone so i am trying the examples. I want to study wishbone communication. I tried the wishbone project from the LogiBone and it worked. Now i am trying to create the .bit file from the logibone-wishbone.xise. When i opened the project it was asking for gpmc2wishbone - gpmc_wishbone_wrapper. I found the file in logi-hard-master. The project now makes the .bit file but in my LogiBone the Led does not operates as in the predefined example. My question is (i am sorry if it is a silly question) there is no .ucf file in the project. Do i have to include a .ucf file? I tried with different .ucf files from the logi-hard-master folder but when i try to compile the project i get these errors: 1. The specified design element actually exists in the original design. 2. The specified object is spelled correctly in the constraint source file. Also i want to ask which the max speed that i can get data at the BeagleBoneBlack from the LogiBone through wishbone? Thank you very much, George — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#24>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ACNWZLHOkYD5QkE4yidPx5AEgL0h34jeks5sM5T2gaJpZM4OUahS> .

[pentesgeorge]

Hello, thank you for your quick responce. I am using 1.5.1 I tried also with ucf for 1.5 version but i get error. Thank you very much, George On 11 Jul 2017 7:46 p.m., "Piat Jonathan" <[email protected]> wrote: Hi, what version of the logibone are you using ? There should be a UCF file linked in the project, but i'll check for it tonight. Regards, Jonathan Piat 2017-07-11 17:29 GMT+02:00 pentesgeorge <[email protected]>:

Hello all, I am new on LogiBone so i am trying the examples. I want to study wishbone communication. I tried the wishbone project from the LogiBone and it worked. Now i am trying to create the .bit file from the logibone-wishbone.xise. When i opened the project it was asking for gpmc2wishbone - gpmc_wishbone_wrapper. I found the file in logi-hard-master. The project now makes the .bit file but in my LogiBone the Led does not operates as in the predefined example. My question is (i am sorry if it is a silly question) there is no .ucf file in the project. Do i have to include a .ucf file? I tried with different .ucf files from the logi-hard-master folder but when i try to compile the project i get these errors: 1. The specified design element actually exists in the original design. 2. The specified object is spelled correctly in the constraint source file. Also i want to ask which the max speed that i can get data at the BeagleBoneBlack from the LogiBone through wishbone? Thank you very much, George — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#24>, or mute the thread <https://github.com/notifications/unsubscribe-auth/

ACNWZLHOkYD5QkE4yidPx5AEgL0h34jeks5sM5T2gaJpZM4OUahS>

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#24 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/Acr_dWMN4v3xDI1uPHWrkGFXXHe5W6O5ks5sM6bSgaJpZM4OUahS> .

[pentesgeorge]

Hello,
from the history of the logi-wishbone files i took this ucf: "adding r1 ucf file to project" and it worked! :)

Now i will go deeper on wishbone as i want to store data from fpga.
The max speed of my input in FPGA will be 30MB/sec. Is it possible?

As i read on discussions and projects-wiki i suppose that i have to setup wishbone in burst mode.
Is this write?

Thank you,
George

[jpiat]

Can you send a screenshot of the error ? Jonathan Piat Le 11 juil. 2017 6:51 PM, "pentesgeorge" <[email protected]> a écrit :

…

Hello, thank you for your quick responce. I am using 1.5.1 I tried also with ucf for 1.5 version but i get error. Thank you very much, George On 11 Jul 2017 7:46 p.m., "Piat Jonathan" ***@***.***> wrote: Hi, what version of the logibone are you using ? There should be a UCF file linked in the project, but i'll check for it tonight. Regards, Jonathan Piat 2017-07-11 17:29 GMT+02:00 pentesgeorge ***@***.***>: > Hello all, > I am new on LogiBone so i am trying the examples. I want to study wishbone > communication. > I tried the wishbone project from the LogiBone and it worked. > > Now i am trying to create the .bit file from the logibone-wishbone.xise. > When i opened the project it was asking for gpmc2wishbone - > gpmc_wishbone_wrapper. I found the file in logi-hard-master. > The project now makes the .bit file but in my LogiBone the Led does not > operates as in the predefined example. > > My question is (i am sorry if it is a silly question) there is no .ucf > file in the project. Do i have to include a .ucf file? > I tried with different .ucf files from the logi-hard-master folder but > when i try to compile the project i get these errors: > > 1. The specified design element actually exists in the original design. > 2. The specified object is spelled correctly in the constraint source > file. > > Also i want to ask which the max speed that i can get data at the > BeagleBoneBlack from the LogiBone through wishbone? > > Thank you very much, > George > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#24>, or mute the thread > <https://github.com/notifications/unsubscribe-auth/ ACNWZLHOkYD5QkE4yidPx5AEgL0h34jeks5sM5T2gaJpZM4OUahS> > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#24# issuecomment-314504133>, or mute the thread <https://github.com/notifications/unsubscribe-auth/Acr_ dWMN4v3xDI1uPHWrkGFXXHe5W6O5ks5sM6bSgaJpZM4OUahS> . — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#24 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ACNWZJPYNkjeNkxTkOLLweQhsVag-8Paks5sM6gcgaJpZM4OUahS> .

[pentesgeorge]

Hello,
i attach a txt file with the errors, maybe it is better for you.

Thank you,
George

errors.txt