1. Make gerber file on kicad
Download kicad files.
$ git clone git://git.gniibe.org/fsm-55.git
Open "fsm-55/fsm-55.pro" file with kicad application. And make gerber file on kicad. Please see following links for the detail.
Then you can get a zip file such like following that is needed to order PCB and stencil.
$ unzip -l fsm-55-gerb.zip
Archive: fsm-55-gerb.zip
Length Date Time Name
--------- ---------- ----- ----
9815 2014-10-08 16:32 fsm-55-gerb/fsm-55-B_Mask.gbs
3055 2014-10-08 16:32 fsm-55-gerb/fsm-55-B_SilkS.gbo
20840 2014-10-08 16:32 fsm-55-gerb/fsm-55-Back.gbl
413 2014-10-08 16:32 fsm-55-gerb/fsm-55-Edge_Cuts.gbr
20613 2014-10-08 16:32 fsm-55-gerb/fsm-55-F_Mask.gts
75053 2014-10-08 16:32 fsm-55-gerb/fsm-55-F_SilkS.gto
44306 2014-10-08 16:32 fsm-55-gerb/fsm-55-Front.gtl
364 2014-10-08 16:35 fsm-55-gerb/fsm-55-drl.rpt
22772 2014-10-08 16:35 fsm-55-gerb/fsm-55-drl_map.pho
652 2014-10-08 16:35 fsm-55-gerb/fsm-55.drl
--------- -------
197883 10 files
Order PCB at 2 Layer 5 * 5cm Max - 5/10pcs (Color Free) [SPF20505S] - $9.90 : Elecrow bazaar.
Order stencil at Laser Cut PCB Stencil service without frame [SPS30121S] - $16.00 : Elecrow bazaar.
- MCU: STM32F030F4P6 - $0.50
- Cell battery holder: BAT-HLD-001-THM - $0.28
- LED: LG R971-KN-1 - $0.061 x 25
- Tactile switch: SKQGAFE010 - $0.73 x 2
- Resistor 47Ω - $0.08 x 5
- Capacitor 4.7uF - $0.06
- Capacitor 100nF (0.1uF) - $0.06 x 4
- Pin header 2.54mm 1x5 - $0.21
- Solder paste - $4.27
- Absolute ethanol
- Electric hot plate (YAMAZEN HG-T1301 - $17.00)
- Magnifier
- ST-LINK V2 (BAITE brand - $6.90)
- Scotch tape
- Squeegee
- Tweezers
6. Assembly (Reflow soldering)
xxx T.B.D. xxx
Please see following links for the detail.