Eufy Camera Person Detection / Sensor - Not working, why?

[muenchen1]

I followed the video Home Assistant Setup with Eufy Doorbell: Notifications & Live Stream to set up my eufy cameras within Home Assistant. All my eufy cameras are shown in "Eufy Security". @fuatakgun great work!

Problem:
Unfortunately, "Person detected" does not work, why?
I would like to set up some automations as mentioned in the video.

All my cameras are logging every now and then alternately "Wurde nicht verfügbar" = "Was not available" and "Wurde frei (keine Bewertung erkannt)" = "Was released (nothing detected)"

Nevertheless, the iOS App "eufy Security" identifies a Person in front of the camera as event (I tested it several times). It seems that this information is not available within Home Assistant.
Any ideas how to solve this problem?
Do I need to change any of my settings?
Could it be, that having more than one camera, that are too much information to be processed?

[fuatakgun]

If the integration is not the receiving person detected from the add-on, there is nothing I can do.

I have seen similar issues with my setup;

1. If i only enable person detection, the integration receives the correct event but missing motion detection events. Eufy homebase (or others) tags the person detection not instantly but a bit later so the initial push notification is missing.
2. If i enable both motion and person detection, it works very rarely because initial push notification is sent as motion detection.

You can reach out to bropat if there is a fix for this but nothing i can help

[muenchen1]

Thank you vey much for your fast reply!
For technical understanding, two more questions?

• Is it normal, that every 3 to 4 hours Home Assistant logs 1 to 4 times "Wurde nicht verfügbar" = "Was not available" and "Wurde frei (keine Bewertung erkannt)" = "Was released (nothing detected)"?
  It seams that the connection failed, correct?
• I have disabled motion_detection_type_all_other_motions, is that what you mean by not to enable both, motion and person detection? Unfortunately, this does not solve the problem in my case.