kn - static binary build issue with openssl #3
Assignees
Comments
|
Even on raspberrypi could not build Downloaded cargo_toml v0.13.0
Compiling libc v0.2.137
Compiling cfg-if v1.0.0
Compiling autocfg v1.1.0
Compiling proc-macro2 v1.0.47
error[E0463]: can't find crate for `core`
|
= note: the `x86_64-unknown-linux-musl` target may not be installed
= help: consider downloading the target with `rustup target add x86_64-unknown-linux-musl`
error[E0463]: can't find crate for `compiler_builtins`
For more information about this error, try `rustc --explain E0463`.
error: could not compile `cfg-if` due to 2 previous errors
warning: build failed, waiting for other jobs to finish...
error: failed to compile `cargo-deb v1.40.5`, intermediate artifacts can be found at `/tmp/cargo-installEMaQgR`
The command '/bin/sh -c env CARGO_HOME=/opt/rust/cargo cargo install -f cargo-deb && rm -rf /opt/rust/cargo/registry/' returned a non-zero code: 101Here is Dockerfile: # Use Ubuntu 18.04 LTS as our base image.
FROM --platform=${TARGETPLATFORM:-linux/arm64} ubuntu:18.04
# The Rust toolchain to use when building our image. Set by `hooks/build`.
ARG TOOLCHAIN=stable
# The OpenSSL version to use. Here is the place to check for new releases:
#
# - https://www.openssl.org/source/
#
# ALSO UPDATE hooks/build!
ARG OPENSSL_VERSION=1.1.1m
# Versions for other dependencies. Here are the places to check for new
# releases:
#
# - https://github.com/rust-lang/mdBook/releases
# - https://github.com/dylanowen/mdbook-graphviz/releases
# - https://github.com/EmbarkStudios/cargo-about/releases
# - https://github.com/rustsec/rustsec/releases
# - https://github.com/EmbarkStudios/cargo-deny/releases
# - http://zlib.net/
# - https://ftp.postgresql.org/pub/source/
#
# We're stuck on PostgreSQL 11 until we figure out
# https://github.com/emk/rust-musl-builder/issues.
ARG MDBOOK_VERSION=0.4.14
ARG MDBOOK_GRAPHVIZ_VERSION=0.1.3
ARG CARGO_ABOUT_VERSION=0.4.4
ARG CARGO_AUDIT_VERSION=0.16.0
ARG CARGO_DENY_VERSION=0.11.0
ARG ZLIB_VERSION=1.2.13
ARG POSTGRESQL_VERSION=11.14
# Make sure we have basic dev tools for building C libraries. Our goal here is
# to support the musl-libc builds and Cargo builds needed for a large selection
# of the most popular crates.
#
# We also set up a `rust` user by default. This user has sudo privileges if you
# need to install any more software.
RUN apt-get update && \
export DEBIAN_FRONTEND=noninteractive && \
apt-get install -yq \
build-essential \
cmake \
curl \
file \
git \
graphviz \
musl-dev \
musl-tools \
libpq-dev \
libsqlite-dev \
libssl-dev \
linux-libc-dev \
pkgconf \
sudo \
unzip \
xutils-dev \
&& \
apt-get clean && rm -rf /var/lib/apt/lists/* && \
useradd rust --user-group --create-home --shell /bin/bash --groups sudo
# - `mdbook` is the standard Rust tool for making searchable HTML manuals.
# - `mdbook-graphviz` allows using inline GraphViz drawing commands to add illustrations.
# - `cargo-about` generates a giant license file for all dependencies.
# - `cargo-audit` checks for security vulnerabilities. We include it for backwards compat.
# - `cargo-deny` does everything `cargo-audit` does, plus check licenses & many other things.
# RUN curl -fLO https://github.com/rust-lang-nursery/mdBook/releases/download/v$MDBOOK_VERSION/mdbook-v$MDBOOK_VERSION-aarch64-unknown-linux-gnu.tar.gz && \
# tar xf mdbook-v$MDBOOK_VERSION-aarch64-unknown-linux-gnu.tar.gz && \
# mv mdbook /usr/local/bin/ && \
# rm -f mdbook-v$MDBOOK_VERSION-aarch64-unknown-linux-gnu.tar.gz && \
# curl -fLO https://github.com/dylanowen/mdbook-graphviz/releases/download/v$MDBOOK_GRAPHVIZ_VERSION/mdbook-graphviz_v${MDBOOK_GRAPHVIZ_VERSION}_aarch64-unknown-linux-musl.zip && \
# unzip mdbook-graphviz_v${MDBOOK_GRAPHVIZ_VERSION}_aarch64-unknown-linux-musl.zip && \
# mv mdbook-graphviz /usr/local/bin/ && \
# rm -f mdbook-graphviz_v${MDBOOK_GRAPHVIZ_VERSION}_aarch64-unknown-linux-musl.zip && \
# curl -fLO https://github.com/EmbarkStudios/cargo-about/releases/download/$CARGO_ABOUT_VERSION/cargo-about-$CARGO_ABOUT_VERSION-aarch64-unknown-linux-musl.tar.gz && \
# tar xf cargo-about-$CARGO_ABOUT_VERSION-aarch64-unknown-linux-musl.tar.gz && \
# mv cargo-about-$CARGO_ABOUT_VERSION-aarch64-unknown-linux-musl/cargo-about /usr/local/bin/ && \
# rm -rf cargo-about-$CARGO_ABOUT_VERSION-aarch64-unknown-linux-musl.tar.gz cargo-about-$CARGO_ABOUT_VERSION-aarch64-unknown-linux-musl && \
# curl -fLO https://github.com/rustsec/rustsec/releases/download/cargo-audit%2Fv${CARGO_AUDIT_VERSION}/cargo-audit-aarch64-unknown-linux-gnu-v${CARGO_AUDIT_VERSION}.tgz && \
# tar xf cargo-audit-aarch64-unknown-linux-gnu-v${CARGO_AUDIT_VERSION}.tgz && \
# cp cargo-audit-aarch64-unknown-linux-gnu-v${CARGO_AUDIT_VERSION}/cargo-audit /usr/local/bin/ && \
# rm -rf cargo-audit-aarch64-unknown-linux-gnu-v${CARGO_AUDIT_VERSION}.tgz cargo-audit-aarch64-unknown-linux-gnu-v${CARGO_AUDIT_VERSION} && \
# curl -fLO https://github.com/EmbarkStudios/cargo-deny/releases/download/$CARGO_DENY_VERSION/cargo-deny-$CARGO_DENY_VERSION-aarch64-unknown-linux-musl.tar.gz && \
# tar xf cargo-deny-$CARGO_DENY_VERSION-aarch64-unknown-linux-musl.tar.gz && \
# mv cargo-deny-$CARGO_DENY_VERSION-aarch64-unknown-linux-musl/cargo-deny /usr/local/bin/ && \
# rm -rf cargo-deny-$CARGO_DENY_VERSION-aarch64-unknown-linux-musl cargo-deny-$CARGO_DENY_VERSION-aarch64-unknown-linux-musl.tar.gz
# Static linking for C++ code
RUN ln -s "/usr/bin/g++" "/usr/bin/musl-g++"
# Build a static library version of OpenSSL using musl-libc. This is needed by
# the popular Rust `hyper` crate.
#
# We point /usr/local/musl/include/linux at some Linux kernel headers (not
# necessarily the right ones) in an effort to compile OpenSSL 1.1's "engine"
# component. It's possible that this will cause bizarre and terrible things to
# happen. There may be "sanitized" header
RUN echo "Building OpenSSL" && \
ls /usr/include/linux && \
mkdir -p /usr/local/musl/include && \
ln -s /usr/include/linux /usr/local/musl/include/linux && \
ln -s /usr/include/aarch64-linux-gnu/asm /usr/local/musl/include/asm && \
ln -s /usr/include/asm-generic /usr/local/musl/include/asm-generic && \
cd /tmp && \
short_version="$(echo "$OPENSSL_VERSION" | sed s'/[a-z]$//' )" && \
curl -fLO "https://www.openssl.org/source/openssl-$OPENSSL_VERSION.tar.gz" || \
curl -fLO "https://www.openssl.org/source/old/$short_version/openssl-$OPENSSL_VERSION.tar.gz" && \
tar xvzf "openssl-$OPENSSL_VERSION.tar.gz" && cd "openssl-$OPENSSL_VERSION" && \
env CC=musl-gcc ./Configure no-shared no-zlib -fPIC --prefix=/usr/local/musl -DOPENSSL_NO_SECURE_MEMORY linux-aarch64 && \
env C_INCLUDE_PATH=/usr/local/musl/include/ make depend && \
env C_INCLUDE_PATH=/usr/local/musl/include/ make && \
make install && \
rm /usr/local/musl/include/linux /usr/local/musl/include/asm /usr/local/musl/include/asm-generic && \
rm -r /tmp/*
RUN echo "Building zlib" && \
cd /tmp && \
curl -fLO "http://zlib.net/zlib-$ZLIB_VERSION.tar.gz" && \
tar xzf "zlib-$ZLIB_VERSION.tar.gz" && cd "zlib-$ZLIB_VERSION" && \
CC=musl-gcc ./configure --static --prefix=/usr/local/musl && \
make && make install && \
rm -r /tmp/*
RUN echo "Building libpq" && \
cd /tmp && \
curl -fLO "https://ftp.postgresql.org/pub/source/v$POSTGRESQL_VERSION/postgresql-$POSTGRESQL_VERSION.tar.gz" && \
tar xzf "postgresql-$POSTGRESQL_VERSION.tar.gz" && cd "postgresql-$POSTGRESQL_VERSION" && \
CC=musl-gcc CPPFLAGS=-I/usr/local/musl/include LDFLAGS=-L/usr/local/musl/lib ./configure --with-openssl --without-readline --prefix=/usr/local/musl && \
cd src/interfaces/libpq && make all-static-lib && make install-lib-static && \
cd ../../bin/pg_config && make && make install && \
rm -r /tmp/*
# (Please feel free to submit pull requests for musl-libc builds of other C
# libraries needed by the most popular and common Rust crates, to avoid
# everybody needing to build them manually.)
# Install a `git credentials` helper for using GH_USER and GH_TOKEN to access
# private repositories if desired. We make sure this is configured for root,
# here, and for the `rust` user below.
ADD git-credential-ghtoken /usr/local/bin/ghtoken
RUN git config --global credential.https://github.com.helper ghtoken
# Set up our path with all our binary directories, including those for the
# musl-gcc toolchain and for our Rust toolchain.
#
# We use the instructions at https://github.com/rust-lang/rustup/issues/2383
# to install the rustup toolchain as root.
ENV RUSTUP_HOME=/opt/rust/rustup \
PATH=/home/rust/.cargo/bin:/opt/rust/cargo/bin:/usr/local/musl/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
# Install our Rust toolchain and the `musl` target. We patch the
# command-line we pass to the installer so that it won't attempt to
# interact with the user or fool around with TTYs. We also set the default
# `--target` to musl so that our users don't need to keep overriding it
# manually.
RUN curl https://sh.rustup.rs -sSf | \
env CARGO_HOME=/opt/rust/cargo \
sh -s -- -y --default-toolchain $TOOLCHAIN --profile minimal --no-modify-path && \
env CARGO_HOME=/opt/rust/cargo \
rustup component add rustfmt && \
env CARGO_HOME=/opt/rust/cargo \
rustup component add clippy && \
env CARGO_HOME=/opt/rust/cargo \
rustup target add aarch64-unknown-linux-musl
ADD cargo-config.toml /opt/rust/cargo/config
# Set up our environment variables so that we cross-compile using musl-libc by
# default.
ENV aarch64_UNKNOWN_LINUX_MUSL_OPENSSL_DIR=/usr/local/musl/ \
aarch64_UNKNOWN_LINUX_MUSL_OPENSSL_STATIC=1 \
PQ_LIB_STATIC_aarch64_UNKNOWN_LINUX_MUSL=1 \
PG_CONFIG_aarch64_UNKNOWN_LINUX_GNU=/usr/bin/pg_config \
PKG_CONFIG_ALLOW_CROSS=true \
PKG_CONFIG_ALL_STATIC=true \
LIBZ_SYS_STATIC=1 \
TARGET=musl
# Install some useful Rust tools from source (as few as we can, because these
# slow down image builds). This will use the static linking toolchain, but that
# should be OK.
#
# - `cargo-deb` builds Debian packages.
RUN env CARGO_HOME=/opt/rust/cargo cargo install -f cargo-deb && \
rm -rf /opt/rust/cargo/registry/
# Allow sudo without a password.
ADD sudoers /etc/sudoers.d/nopasswd
# Run all further code as user `rust`, create our working directories, install
# our config file, and set up our credential helper.
#
# You should be able to switch back to `USER root` from another `Dockerfile`
# using this image if you need to do so.
USER rust
RUN mkdir -p /home/rust/libs /home/rust/src /home/rust/.cargo && \
ln -s /opt/rust/cargo/config /home/rust/.cargo/config && \
git config --global credential.https://github.com.helper ghtoken
# Expect our source code to live in /home/rust/src. We'll run the build as
# user `rust`, which will be uid 1000, gid 1000 outside the container.
WORKDIR /home/rust/src
|
|
after editing cargo-config.toml [build]
# Target musl-libc by default when running Cargo.
target = "aarch64-unknown-linux-musl"
[target.armv7-unknown-linux-musleabihf]
linker = "arm-linux-gnueabihf-gcc"----more logs
error: failed to run custom build command for `lzma-sys v0.1.19`
Caused by:
process didn't exit successfully: `/tmp/cargo-installBYCsH6/release/build/lzma-sys-86327d577db224fc/build-script-build` (exit status: 1)
--- stdout
----more logs
cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_SYSROOT_DIR
cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR
cargo:root=/tmp/cargo-installBYCsH6/aarch64-unknown-linux-musl/release/build/lzma-sys-937da754e499bff9/out
cargo:include=/opt/rust/cargo/registry/src/github.com-1ecc6299db9ec823/lzma-sys-0.1.19/xz-5.2/src/liblzma/api
TARGET = Some("aarch64-unknown-linux-musl")
OPT_LEVEL = Some("3")
HOST = Some("aarch64-unknown-linux-gnu")
CC_aarch64-unknown-linux-musl = None
CC_aarch64_unknown_linux_musl = None
TARGET_CC = None
CC = None
CROSS_COMPILE = None
CFLAGS_aarch64-unknown-linux-musl = None
CFLAGS_aarch64_unknown_linux_musl = None
TARGET_CFLAGS = None
CFLAGS = None
CRATE_CC_NO_DEFAULTS = None
DEBUG = Some("false")
CARGO_CFG_TARGET_FEATURE = Some("neon,pmuv3")
running: "aarch64-linux-musl-gcc" "-O3" "-ffunction-sections" "-fdata-sections" "-fPIC" "-I" "xz-5.2/src/liblzma/api" "-I" "xz-5.2/src/liblzma/lzma" "-I" "xz-5.2/src/liblzma/lz" "-I" "xz-5.2/src/liblzma/check" "-I" "xz-5.2/src/liblzma/simple" "-I" "xz-5.2/src/liblzma/delta" "-I" "xz-5.2/src/liblzma/common" "-I" "xz-5.2/src/liblzma/rangecoder" "-I" "xz-5.2/src/common" "-I" "/opt/rust/cargo/registry/src/github.com-1ecc6299db9ec823/lzma-sys-0.1.19" "-Wall" "-Wextra" "-std=c99" "-pthread" "-DHAVE_CONFIG_H=1" "-o" "/tmp/cargo-installBYCsH6/aarch64-unknown-linux-musl/release/build/lzma-sys-937da754e499bff9/out/xz-5.2/src/liblzma/common/stream_decoder.o" "-c" "xz-5.2/src/liblzma/common/stream_decoder.c"
--- stderr
error occurred: Failed to find tool. Is `aarch64-linux-musl-gcc` installed?
warning: build failed, waiting for other jobs to finish...
error: failed to compile `cargo-deb v1.40.5`, intermediate artifacts can be found at `/tmp/cargo-installBYCsH6`
The command '/bin/sh -c env CARGO_HOME=/opt/rust/cargo cargo install -f cargo-deb && rm -rf /opt/rust/cargo/registry/' returned a non-zero code: 101
[build]
# Target musl-libc by default when running Cargo.
target = "aarch64-unknown-linux-musl"
[target.aarch64-unknown-linux-musl]
linker = "aarch64-linux-gnu-gcc"
rustflags = [ "-C", "target-feature=+crt-static", "-C", "link-arg=-lgcc" ]
[target.armv7-unknown-linux-musleabihf]
linker = "arm-linux-gnueabihf-gcc"may be related to rust-lang/rust#46651 (comment) ? |
|
Able to build arm64 image after updating the [target.aarch64-unknown-linux-musl]
linker = "aarch64-linux-gnu-gcc"
rustflags = [ "-C", "target-feature=+crt-static", "-C", "link-arg=-lgcc" ]
[target.armv7-unknown-linux-musleabihf]
linker = "arm-linux-gnueabihf-gcc"Here is docker image - koolwithk/rust-musl:1.64.0-arm64 build instruction and arm64.Dockerfile - https://github.com/koolwithk/rust-musl-builder#rust-musl-builder-arm64-support reference - rust-lang/rust#46651 (comment) |
|
Still having the openssl issue even with custom docker image for rust-musl-builder with openssl koolwithk/rust-musl:1.64.0-arm64 #15 134.1 error: failed to run custom build command for `openssl-sys v0.9.77`
#15 134.1
#15 134.1 Caused by:
#15 134.1 process didn't exit successfully: `/home/rust/src/target/release/build/openssl-sys-f63ab03a87e35638/build-script-main` (exit status: 101)
#15 134.1 --- stdout
#15 134.1 cargo:rustc-cfg=const_fn
#15 134.1 cargo:rustc-cfg=openssl
#15 134.1 cargo:rerun-if-env-changed=AARCH64_UNKNOWN_LINUX_MUSL_OPENSSL_LIB_DIR
#15 134.1 AARCH64_UNKNOWN_LINUX_MUSL_OPENSSL_LIB_DIR unset
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_LIB_DIR
#15 134.1 OPENSSL_LIB_DIR unset
#15 134.1 cargo:rerun-if-env-changed=AARCH64_UNKNOWN_LINUX_MUSL_OPENSSL_INCLUDE_DIR
#15 134.1 AARCH64_UNKNOWN_LINUX_MUSL_OPENSSL_INCLUDE_DIR unset
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_INCLUDE_DIR
#15 134.1 OPENSSL_INCLUDE_DIR unset
#15 134.1 cargo:rerun-if-env-changed=AARCH64_UNKNOWN_LINUX_MUSL_OPENSSL_DIR
#15 134.1 AARCH64_UNKNOWN_LINUX_MUSL_OPENSSL_DIR unset
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_DIR
#15 134.1 OPENSSL_DIR unset
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_NO_PKG_CONFIG
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_ALLOW_CROSS_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_ALLOW_CROSS_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_ALLOW_CROSS
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_ALLOW_CROSS
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_STATIC
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_DYNAMIC
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_ALL_STATIC
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_PATH_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_PATH_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_PATH
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_PATH
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_LIBDIR_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_LIBDIR_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_LIBDIR
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_LIBDIR
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_SYSROOT_DIR
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR
#15 134.1 cargo:rerun-if-env-changed=SYSROOT
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_STATIC
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_DYNAMIC
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_ALL_STATIC
#15 134.1 cargo:rustc-link-lib=ssl
#15 134.1 cargo:rustc-link-lib=dl
#15 134.1 cargo:rustc-link-lib=crypto
#15 134.1 cargo:rustc-link-lib=dl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_STATIC
#15 134.1 cargo:rerun-if-env-changed=OPENSSL_DYNAMIC
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_ALL_STATIC
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_PATH_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_PATH_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_PATH
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_PATH
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_LIBDIR_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_LIBDIR_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_LIBDIR
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_LIBDIR
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR_aarch64-unknown-linux-musl
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR_aarch64_unknown_linux_musl
#15 134.1 cargo:rerun-if-env-changed=TARGET_PKG_CONFIG_SYSROOT_DIR
#15 134.1 cargo:rerun-if-env-changed=PKG_CONFIG_SYSROOT_DIR
#15 134.1 cargo:rerun-if-changed=build/expando.c
#15 134.1 OPT_LEVEL = Some("3")
#15 134.1 TARGET = Some("aarch64-unknown-linux-musl")
#15 134.1 HOST = Some("aarch64-unknown-linux-gnu")
#15 134.1 CC_aarch64-unknown-linux-musl = None
#15 134.1 CC_aarch64_unknown_linux_musl = None
#15 134.1 TARGET_CC = None
#15 134.1 CC = None
#15 134.1 CROSS_COMPILE = None
#15 134.1 CFLAGS_aarch64-unknown-linux-musl = None
#15 134.1 CFLAGS_aarch64_unknown_linux_musl = None
#15 134.1 TARGET_CFLAGS = None
#15 134.1 CFLAGS = None
#15 134.1 CRATE_CC_NO_DEFAULTS = None
#15 134.1 DEBUG = Some("false")
#15 134.1 CARGO_CFG_TARGET_FEATURE = Some("crt-static,neon,pmuv3")
#15 134.1 running: "aarch64-linux-musl-gcc" "-O3" "-ffunction-sections" "-fdata-sections" "-fPIC" "-static" "-I" "/usr/include" "-Wall" "-Wextra" "-E" "build/expando.c"
#15 134.1 exit status: 127
#15 134.1
#15 134.1 --- stderr
#15 134.1 thread 'main' panicked at '
#15 134.1 Header expansion error:
#15 134.1 Error { kind: ToolExecError, message: "Command \"aarch64-linux-musl-gcc\" \"-O3\" \"-ffunction-sections\" \"-fdata-sections\" \"-fPIC\" \"-static\" \"-I\" \"/usr/include\" \"-Wall\" \"-Wextra\" \"-E\" \"build/expando.c\" with args \"aarch64-linux-musl-gcc\" did not execute successfully (status code exit status: 127)." }
#15 134.1
#15 134.1 Failed to find OpenSSL development headers.
#15 134.1
#15 134.1 You can try fixing this setting the `OPENSSL_DIR` environment variable
#15 134.1 pointing to your OpenSSL installation or installing OpenSSL headers package
#15 134.1 specific to your distribution:
#15 134.1
#15 134.1 # On Ubuntu
#15 134.1 sudo apt-get install libssl-dev
#15 134.1 # On Arch Linux
#15 134.1 sudo pacman -S openssl
#15 134.1 # On Fedora
#15 134.1 sudo dnf install openssl-devel
#15 134.1 # On Alpine Linux
#15 134.1 apk add openssl-dev
#15 134.1
#15 134.1 See rust-openssl documentation for more information:
#15 134.1
#15 134.1 https://docs.rs/openssl
#15 134.1 ', /root/.cargo/registry/src/github.com-1ecc6299db9ec823/openssl-sys-0.9.77/build/main.rs:185:13
#15 134.1 note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
#15 134.1 warning: build failed, waiting for other jobs to finish...
------
error: failed to solve: executor failed running [/bin/sh -c cargo build --target $arch-unknown-linux-musl --release]: exit code: 101 |
|
after creating symlink for aarch64-linux-musl-gcc Compiling num-integer v0.1.45
error[E0277]: the trait bound `i128: traits::Num` is not satisfied
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/lib.rs:406:14
|
406 | impl Integer for $T {
| ^^^^^^^ the trait `traits::Num` is not implemented for `i128`
...
831 | impl_integer_for_isize!(i128, test_integer_i128);
| ------------------------------------------------ in this macro invocation
|
= help: the following other types implement trait `traits::Num`:
f32
f64
i16
i32
i64
i8
isize
u16
and 4 others
note: required by a bound in `Integer`
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/lib.rs:37:28
|
37 | pub trait Integer: Sized + Num + PartialOrd + Ord + Eq {
| ^^^ required by this bound in `Integer`
= note: this error originates in the macro `impl_integer_for_isize` (in Nightly builds, run with -Z macro-backtrace for more info)
error[E0277]: the trait bound `u128: traits::Num` is not satisfied
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/lib.rs:835:14
|
835 | impl Integer for $T {
| ^^^^^^^ the trait `traits::Num` is not implemented for `u128`
...
1057 | impl_integer_for_usize!(u128, test_integer_u128);
| ------------------------------------------------ in this macro invocation
|
= help: the following other types implement trait `traits::Num`:
f32
f64
i16
i32
i64
i8
isize
u16
and 4 others
note: required by a bound in `Integer`
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/lib.rs:37:28
|
37 | pub trait Integer: Sized + Num + PartialOrd + Ord + Eq {
| ^^^ required by this bound in `Integer`
= note: this error originates in the macro `impl_integer_for_usize` (in Nightly builds, run with -Z macro-backtrace for more info)
error[E0277]: the trait bound `i128: traits::Num` is not satisfied
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/roots.rs:136:14
|
136 | impl Roots for $T {
| ^^^^^ the trait `traits::Num` is not implemented for `i128`
...
170 | signed_roots!(i128, u128);
| ------------------------- in this macro invocation
|
= help: the following other types implement trait `traits::Num`:
f32
f64
i16
i32
i64
i8
isize
u16
and 4 others
note: required by a bound in `Roots`
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/roots.rs:9:18
|
9 | pub trait Roots: Integer {
| ^^^^^^^ required by this bound in `Roots`
= note: this error originates in the macro `signed_roots` (in Nightly builds, run with -Z macro-backtrace for more info)
error[E0277]: the trait bound `u128: traits::Num` is not satisfied
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/roots.rs:204:14
|
204 | impl Roots for $T {
| ^^^^^ the trait `traits::Num` is not implemented for `u128`
...
390 | unsigned_roots!(u128);
| --------------------- in this macro invocation
|
= help: the following other types implement trait `traits::Num`:
f32
f64
i16
i32
i64
i8
isize
u16
and 4 others
note: required by a bound in `Roots`
--> /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/roots.rs:9:18
|
9 | pub trait Roots: Integer {
| ^^^^^^^ required by this bound in `Roots`
= note: this error originates in the macro `unsigned_roots` (in Nightly builds, run with -Z macro-backtrace for more info)
For more information about this error, try `rustc --explain E0277`.
error: could not compile `num-integer` due to 4 previous errors
|
|
for fixing num-integer v0.1.45 remove 128 with 64 or 32 sed -i 's/128/32/g' /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/roots.rs
sed -i 's/128/64/g' /home/rust/.cargo/registry/src/github.com-1ecc6299db9ec823/num-integer-0.1.45/src/lib.rs |
|
not statically linked binary. fails to run on other arm64 machine rust@e13ee56362cb:~/src/target/aarch64-unknown-linux-musl/release$ ldd kn
linux-vdso.so.1 (0x0000ffff896b2000)
libssl.so.1.1 => /usr/lib/aarch64-linux-gnu/libssl.so.1.1 (0x0000ffff895fc000)
libcrypto.so.1.1 => /usr/lib/aarch64-linux-gnu/libcrypto.so.1.1 (0x0000ffff893bb000)
libpthread.so.0 => /lib/aarch64-linux-gnu/libpthread.so.0 (0x0000ffff8938f000)
libc.so.6 => /lib/aarch64-linux-gnu/libc.so.6 (0x0000ffff89236000)
/lib/ld-linux-aarch64.so.1 (0x0000ffff89686000)
libdl.so.2 => /lib/aarch64-linux-gnu/libdl.so.2 (0x0000ffff89221000)
rust@e13ee56362cb:~/src/target/aarch64-unknown-linux-musl/release$ ./kn
/home/rust/.kube/config : kubeconfig file does not exists root@lp-arm-1:~/kx-kn-rust/kn/target/aarch64-unknown-linux-musl/release# ./kn
thread 'main' panicked at 'unexpected getrandom error: 0', library/std/src/sys/unix/rand.rs:111:21
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
root@lp-arm-1:~/kx-kn-rust/kn/target/aarch64-unknown-linux-musl/release#
root@lp-arm-1:~/kx-kn-rust/kn/target/aarch64-unknown-linux-musl/release# ldd kn
linux-vdso.so.1 (0x0000ffff983ce000)
libssl.so.1.1 => /lib/aarch64-linux-gnu/libssl.so.1.1 (0x0000ffff98304000)
libcrypto.so.1.1 => /lib/aarch64-linux-gnu/libcrypto.so.1.1 (0x0000ffff98076000)
libpthread.so.0 => /lib/aarch64-linux-gnu/libpthread.so.0 (0x0000ffff98046000)
libc.so.6 => /lib/aarch64-linux-gnu/libc.so.6 (0x0000ffff97ed3000)
/lib/ld-linux-aarch64.so.1 (0x0000ffff9839e000)
libdl.so.2 => /lib/aarch64-linux-gnu/libdl.so.2 (0x0000ffff97ebf000) |
apt-get install musl-tools clang llvm -y
export CC_aarch64_unknown_linux_musl=clang
export AR_aarch64_unknown_linux_musl=llvm-ar
export CARGO_TARGET_AARCH64_UNKNOWN_LINUX_MUSL_RUSTFLAGS="-Clink-self-contained=yes -Clinker=rust-lld"source - briansmith/ring#1414 (comment) |
|
Failed error: linking with after that build works but not statically linked. |
|
build binary but working on outside of container. cargo rustc --target aarch64-linux-gnu-gcc -- -C "target-feature=+crt-static" -C link-arg="-lgcc"
cargo build --target=aarch64-unknown-linux-musl --releasealpine / # ldd kn
/lib/ld-linux-aarch64.so.1 (0xffffaa5f9000)
libssl.so.1.1 => /lib/libssl.so.1.1 (0xffffaa253000)
libcrypto.so.1.1 => /lib/libcrypto.so.1.1 (0xffffaa003000)
Error loading shared library libgcc_s.so.1: No such file or directory (needed by kn)
libpthread.so.0 => /lib/ld-linux-aarch64.so.1 (0xffffaa5f9000)
libdl.so.2 => /lib/ld-linux-aarch64.so.1 (0xffffaa5f9000)
libc.so.6 => /lib/ld-linux-aarch64.so.1 (0xffffaa5f9000)
Error relocating kn: __res_init: symbol not found
Error relocating kn: _Unwind_GetIPInfo: symbol not found
Error relocating kn: _Unwind_GetDataRelBase: symbol not found
Error relocating kn: _Unwind_GetRegionStart: symbol not found
Error relocating kn: _Unwind_SetGR: symbol not found
Error relocating kn: _Unwind_GetTextRelBase: symbol not found
Error relocating kn: _Unwind_Resume: symbol not found
Error relocating kn: _Unwind_DeleteException: symbol not found
Error relocating kn: gnu_get_libc_version: symbol not found
Error relocating kn: _Unwind_RaiseException: symbol not found
Error relocating kn: _Unwind_GetIP: symbol not found
Error relocating kn: _Unwind_Backtrace: symbol not found
Error relocating kn: _Unwind_GetLanguageSpecificData: symbol not found
Error relocating kn: _Unwind_SetIP: symbol not found |
gaganyaan2
changed the title
|
updated Cargo.toml kube dependencies and used rustls-tls instead of openssl kube = { version = "0.75.0", default-features = false, features = ["runtime", "derive", "client", "rustls-tls"] }It's faling with below error. using root@lp-arm-1:~# ./kn
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: HyperError(hyper::Error(Connect, Custom { kind: Other, error: Custom { kind: InvalidData, error: UnsupportedNameType } }))', src/kn.rs:43:64
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
root@lp-arm-1:~# unset KUBECONFIG
root@lp-arm-1:~# ./kn
/root/.kube/config : kubeconfig file does not exists
also tested with |
|
Finally able to build statically linked binary with added below openssl in Cargo.toml openssl = { version = "0.10", features = ["vendored"] }apt install pkg-config perl make
apt install libssl-dev
cargo build --target aarch64-unknown-linux-musl --release |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
After installing
libssl-devon ubuntu andopenssl-develon fedora still the same issue.error details - #2 (comment)
Able to build using custom docker image from https://github.com/koolwithk/rust-musl-builder (fork from https://github.com/emk/rust-musl-builder ) and after tha kn build was successful.
Currently working on arm64 build of https://github.com/koolwithk/rust-musl-builder with aarch64
The text was updated successfully, but these errors were encountered: