Physical disk error

[licsuj27]

I have 3 physical disks with value showing as 2
dell_hw_storage_pdisk_status 2

which according to documentation 2 shows that
2 - Non-Critical, the component is not okay, but not critical.

I confirmed that only 1 disk is actually faulty, therefore I cannot understand how the other 2 are showing as warning.
How is this value gathered?

The last errors I have in /opt/dell/srvadmin/sbin/omreport system esmlog
is from past year.
Could it be that value is read from the whole log?

[galexrt]

The following docs explains how the states are translated from OK, Critical, etc., into numbers https://github.com/galexrt/dellhw_exporter/blob/main/docs/metrics.md#what-do-the-metrics-mean

---

What does omreport storage pdisk controller=ID (replace ID with the controller ID) report?

[licsuj27]

ID : 0:1:0
Status : Non-Critical
ID : 0:1:1
Status : Non-Critical
ID : 0:1:2
Status : Non-Critical

[galexrt]

As omreport is reporting these values the exporter can't really do "anything" about the metrics being set to 2 (Non-Critical).

Not sure if there is like a omreport reset status command.