Oric 1/Atmos version

Oric Atmos/1 version. Pretty nice computer to work with despite the specs.
This requires 48kb, it won't work on the 16kb models.

This takes 4 minutes to load from casette so be patient.

Excalibur 64 version

Probably the worst port along with the Exidy Sorcerer version.
Both share the same quirk : no bitmap mode.
You can technically emulate one through text characters but that comes at a cost.
There is a way resolution mode that's also available and used for story intermission text but due to lack of tools and understanding (for now), this is not used ingame.
No sound also because of lack of documentation as well.

This port requires CP/M and won't work with just the basic ROM. (file assets are loaded from DISK)

PK01 Lviv/Lvov version

Lviv/Lvov PK01 port.
This one was quite hard to figure out but i eventually managed to whip up something.
NSFW, of course.

PMD-85 version

Here's the PMD-85 version, a computer from Czechia back in the soviet days.
This computer still has a small following and they even made an extension to it called "ColorAce", which this game takes advantage of. This does require a hardware modification but this game will also work on non-ColorAce units, you just won't get the extra colors.

BK Elektronika version BK-0010

I had to port this gay game to a russian computer. I just had to.
Note that i'm providing tape and floppy versions but these were converted from the binary version, the only one i tested so far.

Sinclair QL version

WARNING: NSFW !

The long awaited Sinclair QL port is here.... kidding !
This one is designed to run from the floppy drive as i asked other Sinclair QL users what their setup was like and most either used hard drives or GOTEKs... therefore, it relies on floppies. (flp1)
There's a qlpak version as well if you want to run this under Q-emulator.
If you want to run this under sqlux, use the following ini file (sqlux.ini)

SYSROM = js_rom
RAMSIZE = 512
PRINT = lpr
CPU_HOG = 0
FAST_STARTUP = 1
BOOT_DEVICE = FLP1
DEVICE = FLP1,Copyright_Infringement_SinclairQL_2023_gameblabla.img,qdos-native
WIN_SIZE = max
FILTER = 1
FIXASPECT = 1
SOUND = 2
SPEED = 1
KBD = GB
SKIP_BOOT = 1

And make sure the img file is in the same directory as the ini file and run the emulator from there.

Revision 2 fixes an issue with the game not booting on expanded RAM configuration (higher than 512kb).

V.Smile port

18+ only, use the censored version if you don't like it

This lacks sound support but is otherwise playable. As far as i know, this is the first proper vsmile homebrew game outside of demos.
Rikuto has challenged you to a sick trial : pairing you with another mate !
Are you up to the task ?

Usage

Two roms are provided : the normal one using 8bpp color mode and an alternative one with 16bpp hicolor mode.
Reason why i even did this was to potentially avoid a hardware issue with text layer + hicolor when combined causing graphical issues.
Use the normal rom for now.

On real hardware, you will need to flash this to something like a discocart.

Exidy Sorcerer Port

This computer is extremely primitive, though i would argue the unexpanded ZX81 is more so.
This should run on any Exidy with 8KB of RAM but i would recommend 16KB at least.
Tried to get this down under 4KB but i couldn't sadly, despite this version being only under 200 lines or so !

Runs on MAME and should on real hardware as well (make sure to either burn this to a casette or use a device and play the audio)

ZX Spectrum 48k version

Initial version for ZX Spectrum 48k port, provided as a TAP file.
I don't think there has been a real attempt (other than the Bad Apple one for ZX128) that does FMVs on the ZX Spectrum 48k.