0003-SMILE-Plug-device-tree-file.patch

From 140e552063180af228b37df97d2350af64796ee2 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Fri, 5 Sep 2014 15:41:19 -0600
Subject: [PATCH 03/10] SMILE Plug device tree file

This adds a dts file for the SMILE Plug, which only differs from the Mirabox
dts with the LED definitions.

Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
---
 arch/arm/boot/dts/Makefile                 |   1 +
 arch/arm/boot/dts/armada-370-smileplug.dts | 173 +++++++++++++++++++++
 2 files changed, 174 insertions(+)
 create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dab2914fa293..acc6197cdc41 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1202,6 +1202,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 	armada-370-db.dtb \
 	armada-370-dlink-dns327l.dtb \
 	armada-370-mirabox.dtb \
+	armada-370-smileplug.dtb \
 	armada-370-netgear-rn102.dtb \
 	armada-370-netgear-rn104.dtb \
 	armada-370-rd.dtb \
diff --git a/arch/arm/boot/dts/armada-370-smileplug.dts b/arch/arm/boot/dts/armada-370-smileplug.dts
new file mode 100644
index 000000000000..d01308ab848b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-smileplug.dts
@@ -0,0 +1,173 @@
+/*
+ * Device Tree file for Marvell SMILE Plug
+ *
+ * Kevin Mihelich <kevin@archlinuxarm.org>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell SMILE Plug";
+	compatible = "marvell,smileplug", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected on the PCB to a USB 3.0 XHCI controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&smile_led_pins>;
+
+				red_eyes_led {
+					label = "smileplug:red:eyes";
+					gpios = <&gpio1 31 0>;
+					default-state = "off";
+				};
+
+				green_eyes_led {
+					label = "smileplug:green:eyes";
+					gpios = <&gpio2 0 0>;
+					linux,default-trigger = "default-on";
+				};
+
+				red_smile_led {
+					label = "smileplug:red:smile";
+					gpios = <&gpio1 15 0>;
+					default-state = "off";
+				};
+
+				green_smile_led {
+					label = "smileplug:green:smile";
+					gpios = <&gpio1 27 0>;
+					linux,default-trigger = "default-on";
+				};
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+				 broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x400000>;
+				};
+				partition@400000 {
+					label = "Linux";
+					reg = <0x400000 0x400000>;
+				};
+				partition@800000 {
+					label = "Filesystem";
+					reg = <0x800000 0x3f800000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	smile_led_pins: smile-led-pins {
+		marvell,pins = "mpp63", "mpp64", "mpp47", "mpp59";
+		marvell,function = "gpio";
+	};
+};
-- 
2.22.0