Birch Girder

An Email Interface for GitHub Issues

Overview

Birch Girder adds an email interface to your GitHub repo's issues. It allows people without a GitHub account to open new GitHub issues by sending an email and enables GitHub users to reply to those people via email by leaving comments in a GitHub issue.

This let's you use GitHub issues as your customer service help desk software for free (as in beer).

What do you need
Features
How to deploy Birch Girder
Usage
How does it work?

What do you need

A free GitHub user account
A free Amazon Web Services (AWS) account. This requires giving AWS a credit card but as long as you receive 1000 emails or less per month it's free ($0.10 for every additional 1000 emails)
A domain name for which you can have all email destined to addresses in that domain, sent to AWS. This can be a subdomain of an existing domain. If you have no domain name you can buy one from AWS for $9/year or from other registrars for a couple bucks a year.

Notably you don't need a server to run Birch Girder.

Features

Receive inbound email and create a new GitHub issue based on the content of the email
Store email attachments in GitHub and reference them in the issue
Enable people to send email replies to their initial email to add comments to the GitHub issue
Send email replies when a GitHub user comments in an issue
Allow issue comments which do not trigger an email reply

How to deploy Birch Girder

Initial deployment

Ensure `libsodium` is installed

Ubuntu packages libsodium23

sudo apt install libsodium23

CentOS packages libsodium

sudo yum install epel-release
sudo yum install libsodium

Install Birch Girder locally

$ pip install --user birch_girder[deploy]
$ deploy-birch-girder

The deployment tool will then walk you through setting up Birch Girder. You'll see output like this :

No recipient_list in config. Continuing with setup but not
setting up any recipients. Later, configure recipients in the config and run
deploy again.

Provider Name
Your provider name is the name of your organization to be displayed in the
suffix of emails sent.
Example : Example Corporation
Enter the provider name :

Example Corporation

AWS S3 Bucket Name
This will be the name of the AWS S3 bucket that stores, temporarily, the
inbound email body. AWS S3 bucket names must be unique across all AWS accounts
in the world, so you'll have to pick a bucket name.
Example : birch-girder-example-corporation
Enter the AWS S3 bucket name:

birch-girder-example-corporation

GitHub Username
What GitHub user would you like Birch Girder to act as. This user needs access
to all repos which you'd like Birch Girder to manage.
Enter the GitHub username :

octocat

Setting ses_payload_s3_prefix to default of ses-payloads/
Setting sns_topic to default of GithubWebhookTopic

GitHub user password
We'll use this password to generate a GitHub
authorization token that Birch Girder will use to interact with GitHub
Enter the GitHub password for octocat:

password

Enter 2FA code:

123456

GitHub OAuth Token (github_token) created : 0123456789abcdef0123456789abcdef01234567
No alert_sns_topic in config so no alert topic will be setup.
You can add an alert topic to config later and re-run deploy if you would like
an SNS topic created that internal Birch Girder errors will be sent to.
Bucket http://birch-girder-example-corporation.s3.amazonaws.com/ created
Bucket policy for birch-girder-example-corporation created
Bucket lifecycle configuration for birch-girder-example-corporation applied to bucket
Lambda function created : arn:aws:lambda:us-west-2:012345678901:function:birch-girder
Permission GiveSESPermissionToInvokeFunction added
Permission GiveGithubWebhookSNSTopicPermissionToInvokeFunction added
SES Rule birch-girder-rule created in Rule Set
IAM user github-sns-publisher created
IAM policy PublishToGithubWebhookSNSTopic applied to user github-sns-publisher
Birch Girder subscribed to GitHub Webhook SNS Topic  : arn:aws:sns:us-west-2:012345678901:GithubWebhookTopic:01234567-89ab-cdef-0123-456789abcdef

Add recipients

Now that Birch Girder is setup, you'll want to configure email recipients and associate them with GitHub repositories. This is done by adding recipients to the config.yaml file that the deploy tool has created.

recipient_list:
  finance@support.example.com:
    owner: example-corp
    repo: finance
  techsupport@support.example.com:
    owner: example-corp
    repo: techsupport

Create a recipient_list mapping recipient email addresses to GitHub repositories and GitHub repository owners. To configure, for example, email sent to spoon@example.com to create issues in https://github.com/octocat/Spoon-Knife :

recipient_list:
  spoon@example.com:
    owner: octocat
    repo: Spoon-Knife

You can also define a name with the email sender name to use, for example

recipient_list:
  finance@support.example.com:
    owner: example-corp
    repo: finance
    name: Example Corp Finance Department

Would result in emails coming from Example Corp Finance Department <finance@support.example.com>

Once you have your recipients added to your config, run deploy-birch-girder again

$ deploy-birch-girder

Recipient finance@support.example.com verification hasn't been initiated in AWS SES
Would you like to verify the email address finance@support.example.com or the domain support.example.com [email/domain]:

domain

Would you like to host the zone support.example.com in route53 (for $0.50/month) or on your own [route53/myself]:

myself

Verification of support.example.com initiated

To verify this domain create a DNS record in the support.example.com domain with the 
name "_amazonses.support.example.com" and the value "abcdefghijklmnopqrstuvwxyz0123456789ABCDEFG="

The record in the example.com zone would look like this:

_amazonses.support    IN    TXT    "abcdefghijklmnopqrstuvwxyz0123456789ABCDEFG="

Create an DNS SPF record so email that Amazon sends from the email address
finance@support.example.com is considered to not be spam.
The record in the example.com zone would look like this:

support    IN    TXT    "v=spf1 include:amazonses.com -all"

Create DNS DKIM CNAME records so that Amazon can sign email sent from
finance@support.example.com to further ensure it isn't considered spam.
The records in the example.com zone would look like this:

2huz4qkplcqbkrt7if5vrni7tieag2l5._domainkey.support    IN    CNAME    abcdefghijklmnopqrstuvwxyz012345.dkim.amazonses.com.
anafzfmcwku4adkux7ifzi4wokvcpywc._domainkey.support    IN    CNAME    6789ABCDEFGHIJKLMNOPQRSTUVWXYZab.dkim.amazonses.com.
2lbcro7jkqtc3o2ng34aip5amz3ogczr._domainkey.support    IN    CNAME    cdefghijklmnopqrstuvwxyz01234567.dkim.amazonses.com.

Create a DNS MX record so inbound email destined for support.example.com is
delivered to AWS SES. The MX record in the example.com zone would look like this:

support    IN    MX    10    inbound-smtp.us-west-2.amazonaws.com.

Aborting while you complete email/domain verifications. Run this again when they're complete

Verify DNS domains

Follow the instructions returned and add the required DNS entries into the nameservers for your domain name.

Once all the DNS records have been added, run deploy-birch-girder again

Finish enabling recipients

$ deploy-birch-girder

Lambda function updated : arn:aws:lambda:us-west-2:012345678901:function:birch-girder
Created GitHub repo https://github.com/example-corp/finance
Created new Access Key for IAM user github-sns-publisher : ABCDEFGHIJKLMNOPQRST
New amazonsns webhook installed in https://github.com/example-corp/finance with user access key ABCDEFGHIJKLMNOPQRST
GitHub webook "amazonsns" on repo https://github.com/example-corp/finance configured to trigger on [u'push', u'issue_comment']

Test your new deployment

Send an email to the recipient you've setup, in our example finance@support.example.com
Go check if a new issue is created in the associated repository, in our example https://github.com/example-corp/finance
Confirm that you received a response email acknowledging receipt of your email. In our example it would be sent by Example Corp Finance Department <finance@support.example.com>
In the newly created GitHub issue, add a comment and mention in the comment the GitHub user that Birch Girder is running as, in our example octocat. Add the mention by putting in the comment the username prepended with the @ symbol. For example we'd add a line saying @octocat
Check your email to see that you received an email with this new comment.

What if something goes wrong

If you encounter a problem you can fix it and just re-run deploy-birch-girder. It can be run as many times as you want as each time is just attempts to converge your deployed setup in GitHub and AWS with what you've defined in your config.yaml file.

Usage

Create a new issue

Send an email to any email address in the recipient_list and that email will be added as an issue to the repository associated with the email address in the recipient_list

Reply to the requester from a GitHub ticket

Add a comment in a GitHub issue created by Birch Girder and include in the comment somewhere an @ mention of the Birch Girder GitHub user. For example after your comment add a line that says @octocat if the GitHub user that Birch Girder is configured to use was octocat

Add comments to a ticket via email

The original requester can reply to the initial reply email that they received or any other email from Birch Girder and their reply will be incorporated into the ticket they're replying to as a comment.

Attachments

Any email sent to Birch Girder can have attachments. Those attachments are stored in the associated GitHub repository and referenced in the issue.

Replay an email

If something goes wrong with Birch Girder or a plugin and you want to replay an email you've already received so that it will be processed again and a new issue will be created, you can send an event to the lambda function in the format below passing the message ID of the email you want to replay.

You may want to rename the existing GitHub issue lest your replay be added as a comment to the existing issue.

{
  "replay-email": "nvk908umpjst57s3er4or1e4usb7b0pr0vh72jo1"
}

How does it work?

Diagram

Flows

Email received flow

A user sends an email to support@example.com, one of the email addresses in the recipient_list in config.yaml
That email is delivered to AWS SES
AWS SES follows the rule in the rule set that says to save the email body into an S3 bucket and to trigger the Birch Girder AWS Lambda function
The Lambda function runs and
- Fetches the email payload from S3
- Looks and sees that the email is a reply to an existing issue
  - If it is not a reply and is instead a new issue
    - Calls the GitHub API and creates a new GitHub issue with the content of the email
    - Calls AWS SES to send an email response back to the user acknowledging receipt of their email
  - Otherwise if it is a reply to an existing issue
    - Calls the GitHub API and adds a comment to the existing GitHub issue

Additionally if the email contains attachments, those attachments will be committed to the git repo and added by link to the issue comment as well as to a table in the body of the issue.

Issue comment flow

Private comment

A support tech sees that there's a new GitHub issue that's been created from an email sent in by a user
The support tech adds a comment to the issue that they don't wish to trigger an email to the user
GitHub's webhook sees the new comment and calls AWS SNS using the configured AWS IAM user with the details about the new comment
The Birch Girder AWS Lambda function, which subscribes to the SNS topic which GitHub just published to, gets the new SNS notification from GitHub
The Lambda function parses the information and sees that the comment did not contain the reserved mention word indicating that it is a reply to the user. As a result the Lambda function ignores the new comment.

Reply comment

A support tech decides to ask the user some questions about their issue so they add a comment to the GitHub issue and include somewhere in the comment the reserved mention word. This is the @ at sign followed by the github_username configured in Birch Girder, for example @hubot
GitHub's webhook sees the new comment and calls AWS SNS using the configured AWS IAM user with the details about the new comment
The Birch Girder AWS Lambda function, which subscribes to the SNS topic which GitHub just published to, gets the new SNS notification from GitHub
The Lambda function parses the information and sees that the comment included the reserved mention word and was an issue originally created from an email submitted by a user. As a result the Lambda function will send the comment to the user as an email reply.
The Lambda function calls AWS SES with the email reply to send to the user

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Birch Girder

Overview

What do you need

Features

How to deploy Birch Girder

Initial deployment

Ensure `libsodium` is installed

Install Birch Girder locally

Add recipients

Verify DNS domains

Finish enabling recipients

Test your new deployment

What if something goes wrong

Usage

Create a new issue

Reply to the requester from a GitHub ticket

Add comments to a ticket via email

Attachments

Replay an email

How does it work?

Diagram

Flows

Email received flow

Issue comment flow

Private comment

Reply comment

Files

README.md

Latest commit

History

README.md

File metadata and controls

Birch Girder

Overview

What do you need

Features

How to deploy Birch Girder

Initial deployment

Ensure libsodium is installed

Install Birch Girder locally

Add recipients

Verify DNS domains

Finish enabling recipients

Test your new deployment

What if something goes wrong

Usage

Create a new issue

Reply to the requester from a GitHub ticket

Add comments to a ticket via email

Attachments

Replay an email

How does it work?

Diagram

Flows

Email received flow

Issue comment flow

Private comment

Reply comment

Ensure `libsodium` is installed