From d9b335d428f9c429ff9cfcf18f4a05c4cb6fd6c4 Mon Sep 17 00:00:00 2001 From: Simo Hostikka Date: Thu, 9 Jan 2025 10:27:04 +0200 Subject: [PATCH] FDS Validation: TUS_facade inputs using CATF --- .../FDS_Input_Files/CATF/TUS_MATL.txt | 105 ++++++++++++++++++ .../FDS_Input_Files/CATF/TUS_devices.txt | 65 +++++++++++ .../CATF/TUS_facade_1-1-2-3.fds | 87 +++++++++++++++ .../CATF/TUS_facade_2-1-2-3.fds | 83 ++++++++++++++ .../FDS_Input_Files/CATF/TUS_facade_I-1-2.fds | 79 +++++++++++++ .../FDS_Input_Files/CATF/TUS_static_geom.txt | 29 +++++ 6 files changed, 448 insertions(+) create mode 100644 Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_MATL.txt create mode 100644 Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_devices.txt create mode 100644 Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_1-1-2-3.fds create mode 100644 Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_2-1-2-3.fds create mode 100644 Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_I-1-2.fds create mode 100644 Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_static_geom.txt diff --git a/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_MATL.txt b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_MATL.txt new file mode 100644 index 0000000000..ca94623e7a --- /dev/null +++ b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_MATL.txt @@ -0,0 +1,105 @@ +------------------------------MATERIALS------------------------------- +EN1992-1-2 values for normal weight concrete + +EUROCODE 1993-1-2:1995 &3.4.1.3 carbon steel +&MATL ID = 'STEEL' + EMISSIVITY = 0.9 + DENSITY = 7850. + CONDUCTIVITY_RAMP = 'c-steel' + SPECIFIC_HEAT_RAMP= 's-steel'/ + +&RAMP ID = 'c-steel', T = 0., F = 53.3/ +&RAMP ID = 'c-steel', T = 800., F = 27.3/ +&RAMP ID = 'c-steel', T = 1200., F = 27.3/ + +&RAMP ID = 's-steel', T = 0., F = 0.439/ +&RAMP ID = 's-steel', T = 600., F = 0.759/ +&RAMP ID = 's-steel', T = 640., F = 0.798/ +&RAMP ID = 's-steel', T = 680., F = 0.890/ +&RAMP ID = 's-steel', T = 720., F = 1.388/ +&RAMP ID = 's-steel', T = 735., F = 5.0/ +&RAMP ID = 's-steel', T = 740., F = 2.525/ +&RAMP ID = 's-steel', T = 760., F = 1.159/ +&RAMP ID = 's-steel', T = 780., F = 0.909/ +&RAMP ID = 's-steel', T = 800., F = 0.803/ +&RAMP ID = 's-steel', T = 820., F = 0.745/ +&RAMP ID = 's-steel', T = 840., F = 0.708/ +&RAMP ID = 's-steel', T = 860., F = 0.683/ +&RAMP ID = 's-steel', T = 880., F = 0.664/ +&RAMP ID = 's-steel', T = 900., F = 0.65/ +&RAMP ID = 's-steel', T = 1200., F = 0.65/ + + +ISOWOOL 1260 +&MATL ID = 'CERAMIC_FIBRE_BLANKET' + EMISSIVITY = 0.9 + DENSITY = 100. + CONDUCTIVITY_RAMP = 'c-ceramic' + SPECIFIC_HEAT= 1.0/ + +&RAMP ID = 'c-ceramic', T = 0., F = 0.1/ +&RAMP ID = 'c-ceramic', T = 600., F = 0.15/ +&RAMP ID = 'c-ceramic', T = 800., F = 0.22/ + +ISOURU BOARD 1260 +http://isolite.co.jp/info/ceramicfiber/seihin2-6/index.html +&MATL ID = 'CERAMIC_FIBRE_BOARD' + EMISSIVITY = 0.9 + DENSITY = 250. + CONDUCTIVITY_RAMP = 'c-board' + SPECIFIC_HEAT= 1.0 / + +&RAMP ID = 'c-board', T = 0., F = 0.07/ +&RAMP ID = 'c-board', T = 400., F = 0.07/ +&RAMP ID = 'c-board', T = 600., F = 0.12/ +&RAMP ID = 'c-board', T = 800., F = 0.16/ +&RAMP ID = 'c-board', T = 1000., F = 0.23/ + +According to EN 1094-4:1995 +&MATL ID = 'CALSIUM_SILICATE_BOARD' + EMISSIVITY = 0.9 + DENSITY = 225. + CONDUCTIVITY= 0.21 + SPECIFIC_HEAT= 0.84 / + +------------------------------------------SURFACE PROPERTIES------------------------------------- + +&SURF ID='PIPE', + COLOR = 'RED', + MATL_ID = 'STEEL', + STRETCH_FACTOR = 2, + THICKNESS = 0.006/ + +&SURF ID='CEILING', + COLOR = 'SILVER', + MATL_ID = 'CERAMIC_FIBRE_BOARD','STEEL', + STRETCH_FACTOR = 1.5,2, + THICKNESS = 0.05,0.006, + BACKING = 'VOID'/ + +&SURF ID='FLOOR', + COLOR = 'GRAY 30', + MATL_ID = 'CERAMIC_FIBRE_BLANKET','CERAMIC_FIBRE_BOARD','STEEL', + STRETCH_FACTOR = 2,2,2, + THICKNESS = 0.025,0.05,0.006, + BACKING = 'VOID' / + +&SURF ID='WALL', + COLOR = 'SILVER', + MATL_ID = 'CERAMIC_FIBRE_BOARD','STEEL', + STRETCH_FACTOR = 1.5,2, + THICKNESS = 0.05,0.006, + BACKING = 'VOID', + DEFAULT=.TRUE./ + +&SURF ID='FRONTWALL', + COLOR = 'GRAY 70', + MATL_ID = 'CERAMIC_FIBRE_BOARD','STEEL', + STRETCH_FACTOR = 1.5,2, + THICKNESS = 0.05,0.006 / + +&SURF ID='FACADE', + COLOR = 'GRAY 60', + MATL_ID = 'CERAMIC_FIBRE_BOARD','CALSIUM_SILICATE_BOARD', + STRETCH_FACTOR = 2,2,2, + THICKNESS = 0.025,0.025 / diff --git a/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_devices.txt b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_devices.txt new file mode 100644 index 0000000000..ad3f8ec53c --- /dev/null +++ b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_devices.txt @@ -0,0 +1,65 @@ +-----------------------------------------------MEASURING------------------------------------------------- +&PROP ID = 'TC' + QUANTITY = 'THERMOCOUPLE' + DIAMETER = 0.0032/ + +&PROP ID = 'TC2' + QUANTITY = 'THERMOCOUPLE' + DIAMETER = 0.0016/ + +Gas temperatures at facade + +Line a +&DEVC XYZ=1.1,-0.25,1.75, PROP_ID = 'TC', ID='TC_23' / +&DEVC XYZ=1.1,-0.25,2.6, PROP_ID = 'TC', ID='TC_20' / +&DEVC XYZ=1.1,-0.25,2.9, PROP_ID = 'TC', ID='TC_17' / +&DEVC XYZ=1.1,-0.25,3.2, PROP_ID = 'TC', ID='TC_14' / +&DEVC XYZ=1.1,-0.25,5.7, PROP_ID = 'TC', ID='TC_3' / + +Line b +&DEVC XYZ=2.0,-0.25,1.75, PROP_ID = 'TC', ID='TC_22' / This may be functioning wrong. +&DEVC XYZ=2.0,-0.25,2.6, PROP_ID = 'TC', ID='TC_19' / +&DEVC XYZ=2.0,-0.25,2.9, PROP_ID = 'TC', ID='TC_16' / +&DEVC XYZ=2.0,-0.25,3.2, PROP_ID = 'TC', ID='TC_13' / +&DEVC XYZ=2.0,-0.25,3.7, PROP_ID = 'TC', ID='TC_11' / +&DEVC XYZ=2.0,-0.25,5.7, PROP_ID = 'TC', ID='TC_2' / + +Line c +&DEVC XYZ=2.9,-0.25,1.75, PROP_ID = 'TC', ID='TC_21' / +&DEVC XYZ=2.9,-0.25,2.6, PROP_ID = 'TC', ID='TC_18' / +&DEVC XYZ=2.9,-0.25,2.9, PROP_ID = 'TC', ID='TC_15' / +&DEVC XYZ=2.9,-0.25,3.2, PROP_ID = 'TC', ID='TC_12' / +&DEVC XYZ=2.9,-0.25,3.7, PROP_ID = 'TC', ID='TC_10' / +&DEVC XYZ=2.9,-0.25,5.7, PROP_ID = 'TC', ID='TC_1' / + +Gauge Heat fluxes +Line a +&DEVC XYZ=1.1,-0.2,2.6, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_10', IOR = -2 / +&DEVC XYZ=1.1,-0.2,3.2, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_5', IOR = -2 / + +Line b +&DEVC XYZ=2.0,-0.2,2.6, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_9', IOR = -2 / +&DEVC XYZ=2.0,-0.2,2.9, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_7', IOR = -2 / +&DEVC XYZ=2.0,-0.2,3.2, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_4', IOR = -2 / +&DEVC XYZ=2.0,-0.2,3.7, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_2', IOR = -2 / + +Line c +&DEVC XYZ=2.9,-0.2,2.6, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_8', IOR = -2 / +&DEVC XYZ=2.9,-0.2,2.9, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_6', IOR = -2 / +&DEVC XYZ=2.9,-0.2,3.2, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_3', IOR = -2 / +&DEVC XYZ=2.9,-0.2,3.7, QUANTITY = 'GAUGE HEAT FLUX', ID='HF_1', IOR = -2 / + +Temperature inside chamber +POLE_A +&DEVC XYZ=0.09,0.09,0.22, PROP_ID = 'TC2' ID='TC_32'/ +&DEVC XYZ=0.09,0.09,0.43, PROP_ID = 'TC2', ID='TC_31'/ +&DEVC XYZ=0.09,0.09,0.855, PROP_ID = 'TC2', ID='TC_30'/ +&DEVC XYZ=0.09,0.09,1.28, PROP_ID = 'TC2', ID='TC_29'/ +&DEVC XYZ=0.09,0.09,1.49, PROP_ID = 'TC2', ID='TC_28'/ + +POLE_B +&DEVC XYZ=3.91,3.91,0.22, PROP_ID = 'TC2', ID='TC_37'/ +&DEVC XYZ=3.91,3.91,0.43, PROP_ID = 'TC2', ID='TC_36'/ +&DEVC XYZ=3.91,3.91,0.855, PROP_ID = 'TC2', ID='TC_35'/ +&DEVC XYZ=3.91,3.91,1.28, PROP_ID = 'TC2', ID='TC_34'/ +&DEVC XYZ=3.91,3.91,1.49, PROP_ID = 'TC2', ID='TC_33'/ diff --git a/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_1-1-2-3.fds b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_1-1-2-3.fds new file mode 100644 index 0000000000..1aa259d374 --- /dev/null +++ b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_1-1-2-3.fds @@ -0,0 +1,87 @@ +&HEAD CHID='TUS_facade_1-1-2-3'/ + +Grid cell size: dx = dy = dz = 0.1 m + +Combustion chamber 4.0m x 4.0m x 1,7m +Facade test specimen 5.7m high, 3.0m wide (main wall) +Facade test specimen 5.7m high, 1.2m wide (side wall) +Opening 1.2m high, 2.0m wide + +Fire mesh(es). +&MESH ID = 'm1', IJK=40,45,18, XB= 0.0,4.0, -0.1, 4.1, 0.0,1.8 / Room +&MESH ID = 'm2', IJK=40,10,18, XB= 0.0,4.0, 4.1, 5.1, 0.0,1.8 / Rear area +&MESH ID = 'm3', IJK=35,30,60, XB= 0.0,3.5, -3.0,-0.1, 0.0,6.0 /Front wall + side wall + +&MISC TMPA=40.0/ + +&TIME T_END=2700.0 / + +&DUMP SMOKE3D = .TRUE., + NFRAMES = 1800, + DT_PART = 1.0, + DT_HRR = 1.0, + DT_SLCF = 1.0, + DT_BNDF = 1.0, + DT_PL3D = 6000.0, + DT_DEVC = 10.0, + DT_ISOF = 1000000.0 / + + +&CATF OTHER_FILES = 'TUS_MATL.txt','TUS_static_geom.txt','TUS_devices.txt' / + +-------------------------------FIRE SOURCE---------------------------------- + +&REAC FUEL = 'PROPANE', SOOT_YIELD=0.015, CO_YIELD=0.015, RADIATIVE_FRACTION = 0.20 / + +ISO max 5.6 MW +&SURF ID='BURNER', + HRRPUA=3783.8 + RAMP_Q='fireramp', + MATL_ID = 'CALSIUM_SILICATE_BOARD', COLOR='RASPBERRY', THICKNESS = 0.025 / + +&RAMP ID='fireramp', T=0.0, F=0.0 / +&RAMP ID='fireramp', T=30.0, F=0.25 / +&RAMP ID='fireramp', T=300.0, F=0.25 / +&RAMP ID='fireramp', T=330.0, F=0.0 / +&RAMP ID='fireramp', T=900.0, F=0.0 / +&RAMP ID='fireramp', T=930.0, F=0.5 / +&RAMP ID='fireramp', T=1200.0, F=0.5 / +&RAMP ID='fireramp', T=1230.0, F=0.0 / +&RAMP ID='fireramp', T=1800.0, F=0.0 / +&RAMP ID='fireramp', T=1830.0, F=0.75 / +&RAMP ID='fireramp', T=2100.0, F=0.75 / +&RAMP ID='fireramp', T=2130.0, F=0.0 / +&RAMP ID='fireramp', T=2700.0, F=0.0 / + +Burner area 4 = 0.1 x 3.7 m = 1.48 m2 +Nominal HRR = 5.6 MW +HRRPUA = 3783.8 kW/m2 + +&OBST XB= 0.5,0.6, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 1.5,1.6, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 2.4,2.5, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 3.3,3.4, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / + + +-------------------------------------------GEOMETRY------------------------------------------------- + +&HOLE XB = 1.0,3.0, -0.2, 0.1, 0.5,1.7 / Window opening on facade + +Time dependent objects + +&HOLE XB = 0.3,0.9, 3.9,4.2, 0.4,0.9 DEVC_ID = 'TIMER' / Rear side opening 1 closes at 1900 s (based on room temps) +&HOLE XB = 1.2,1.8, 3.9,4.2, 0.4,0.9 DEVC_ID = 'TIMER' / Rear side opening 2 closes at 1900 s +&HOLE XB = 2.2,2.8, 3.9,4.2, 0.4,0.9 / Rear side opening 3 open all the time +&HOLE XB = 3.1,3.7, 3.9,4.2, 0.4,0.9 / Rear side opening 4 open all the time + +&DEVC QUANTITY='TIME',ID='TIMER', SETPOINT=1900.0, XYZ=0.0,0.0,0.0, INITIAL_STATE =.TRUE./ + + + +BNDF QUANTITY = 'GAUGE HEAT FLUX'/ +BNDF QUANTITY = 'WALL TEMPERATURE'/ +SLCF QUANTITY = 'TEMPERATURE', PBX = 2.0 / +SLCF QUANTITY = 'TEMPERATURE', PBY = 2.0 / + +&TAIL / + diff --git a/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_2-1-2-3.fds b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_2-1-2-3.fds new file mode 100644 index 0000000000..bc38ab1aa2 --- /dev/null +++ b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_2-1-2-3.fds @@ -0,0 +1,83 @@ +&HEAD CHID='TUS_facade_2-1-2-3'/ + +Grid cell size: dx = dy = dz = 0.1 m + +Combustion chamber 4.0m x 4.0m x 1,7m +Facade test specimen 5.7m high, 3.0m wide (main wall) +Facade test specimen 5.7m high, 1.2m wide (side wall) +Opening 1.2m high, 2.0m wide + +Fire mesh(es). +&MESH ID = 'm1', IJK=40,45,18, XB= 0.0,4.0, -0.1, 4.1, 0.0,1.8 / Room + MESH ID = 'm2', IJK=40,10,18, XB= 0.0,4.0, 4.1, 5.1, 0.0,1.8 / Rear area +&MESH ID = 'm3', IJK=35,30,60, XB= 0.0,3.5, -3.0,-0.1, 0.0,6.0 / Front wall + side wall + + +&MISC TMPA=40.0/ + +&TIME T_END=2700.0 / + +&DUMP SMOKE3D = .TRUE., + NFRAMES = 1800, + DT_PART = 1.0, + DT_HRR = 1.0, + DT_SLCF = 1.0, + DT_BNDF = 1.0, + DT_PL3D = 6000.0, + DT_DEVC = 10.0, + DT_ISOF = 1000000.0 / + +&CATF OTHER_FILES = 'TUS_MATL.txt','TUS_static_geom.txt','TUS_devices.txt' / + +-------------------------------FIRE SOURCE---------------------------------- + +&REAC FUEL = 'PROPANE', SOOT_YIELD=0.015, CO_YIELD=0.015, RADIATIVE_FRACTION = 0.20/ + +ISO max 5.6 MW +&SURF ID='BURNER', + HRRPUA=3783.8 + RAMP_Q='fireramp', + MATL_ID = 'CALSIUM_SILICATE_BOARD', COLOR='RASPBERRY', THICKNESS = 0.025 / + +&RAMP ID='fireramp', T=0.0, F=0.0 / +&RAMP ID='fireramp', T=10.0, F=0.125 / +&RAMP ID='fireramp', T=300.0, F=0.125 / +&RAMP ID='fireramp', T=320.0, F=0.0 / +&RAMP ID='fireramp', T=910.0, F=0.0 / +&RAMP ID='fireramp', T=940.0, F=0.25 / +&RAMP ID='fireramp', T=1200.0, F=0.25 / +&RAMP ID='fireramp', T=1220.0, F=0.0 / +&RAMP ID='fireramp', T=1800.0, F=0.0 / +&RAMP ID='fireramp', T=1820.0, F=0.5 / +&RAMP ID='fireramp', T=2100.0, F=0.5 / +&RAMP ID='fireramp', T=2120.0, F=0.0 / +&RAMP ID='fireramp', T=2700.0, F=0.0 / + +Burner area 4 = 0.1 x 3.7 m = 1.48 m2 +Nominal HRR = 5.6 MW +HRRPUA = 3783.8 kW/m2 + +&OBST XB= 0.5,0.6, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 1.5,1.6, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 2.4,2.5, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 3.3,3.4, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / + +-------------------------------------------GEOMETRY------------------------------------------------- +Time dependent options + +Window +&HOLE XB = 1.0,3.0, -0.2,0.1, 0.5,0.7 / Window H = 0.2 m for test 2-1 +&HOLE XB = 1.0,3.0, -0.2,0.1, 0.7,1.0, DEVC_ID = 'TIMER' / Window H = 0.5 m for test 2-2 +&HOLE XB = 1.0,3.0, -0.2,0.1, 1.0,1.5, DEVC_ID = 'TIMER2'/ Window H = 1.0 m for test 2-3 + +&DEVC QUANTITY='TIME',ID='TIMER', SETPOINT=400.0, XYZ=0.0,0.0,0.0, INITIAL_STATE =.FALSE./ +&DEVC QUANTITY='TIME',ID='TIMER2', SETPOINT=1600.0, XYZ=0.0,0.0,0.0, INITIAL_STATE =.FALSE./ +--------------------------- + + +BNDF QUANTITY = 'GAUGE HEAT FLUX'/ +BNDF QUANTITY = 'WALL TEMPERATURE'/ +SLCF QUANTITY = 'TEMPERATURE', PBX = 2.0 / +SLCF QUANTITY = 'TEMPERATURE', PBY = 2.0 / + +&TAIL / \ No newline at end of file diff --git a/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_I-1-2.fds b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_I-1-2.fds new file mode 100644 index 0000000000..7bb2f8bc75 --- /dev/null +++ b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_facade_I-1-2.fds @@ -0,0 +1,79 @@ +&HEAD CHID='TUS_facade_I-1-2'/ + +Grid cell size: dx = dy = dz = 0.1 m + +Combustion chamber 4.0m x 4.0m x 1,7m +Facade test specimen 5.7m high, 3.0m wide (main wall) +Facade test specimen 5.7m high, 1.2m wide (side wall) +Opening 1.2m high, 2.0m wide + +Fire mesh(es). +&MESH ID = 'm1', IJK=40,45,18, XB= 0.0,4.0, -0.1, 4.1, 0.0,1.8 / Room +&MESH ID = 'm2', IJK=40,10,18, XB= 0.0,4.0, 4.1, 5.1, 0.0,1.8 / Rear area +&MESH ID = 'm3', IJK=35,30,60, XB= 0.0,3.5, -3.0,-0.1, 0.0,6.0 /Front wall + side wall + +&MISC TMPA=40.0/ + +&TIME T_END=1800.0 / + +&DUMP SMOKE3D = .TRUE., + NFRAMES = 1800, + DT_PART = 1.0, + DT_HRR = 1.0, + DT_SLCF = 1.0, + DT_BNDF = 1.0, + DT_PL3D = 6000.0, + DT_DEVC = 10.0, + DT_ISOF = 1000000.0 / + +&CATF OTHER_FILES = 'TUS_MATL.txt','TUS_static_geom.txt','TUS_devices.txt' / + +-------------------------------FIRE SOURCE---------------------------------- + +&REAC FUEL = 'PROPANE', SOOT_YIELD=0.015, CO_YIELD=0.015, RADIATIVE_FRACTION = 0.20/ + +ISO max 5.6 MW +&SURF ID='BURNER', + HRRPUA=3783.8 + RAMP_Q='fireramp', + MATL_ID = 'CALSIUM_SILICATE_BOARD', COLOR='RASPBERRY', THICKNESS = 0.025 / + +&RAMP ID='fireramp', T=0.0, F=0.0 / +&RAMP ID='fireramp', T=50.0, F=0.1 / +&RAMP ID='fireramp', T=60.0, F=0.5 / +&RAMP ID='fireramp', T=300.0, F=0.5 / +&RAMP ID='fireramp', T=315.0, F=0.0 / +&RAMP ID='fireramp', T=915.0, F=0.0 / +&RAMP ID='fireramp', T=940.0, F=0.75 / +&RAMP ID='fireramp', T=1200.0, F=0.75 / +&RAMP ID='fireramp', T=1220.0, F=0.0 / +&RAMP ID='fireramp', T=1800.0, F=0.0 / + +Burner area 4 = 0.1 x 3.7 m = 1.48 m2 +Nominal HRR = 5.6 MW +HRRPUA = 3783.8 kW/m2 + +&OBST XB= 0.5,0.6, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 1.5,1.6, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 2.4,2.5, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / +&OBST XB= 3.3,3.4, 0.2,3.9, 0.0,0.2, SURF_IDS='BURNER','PIPE','PIPE' / + +-------------------------------------------GEOMETRY------------------------------------------------- + +Back side windows, one open + HOLE XB = 0.3,0.9, 3.9,4.2, 0.4,0.9 / + HOLE XB = 1.2,1.8, 3.9,4.2, 0.4,0.9 / + HOLE XB = 2.2,2.8, 3.9,4.2, 0.4,0.9 / +&HOLE XB = 3.1,3.7, 3.9,4.2, 0.4,0.9 / + +Window to facade wall open all the time +&HOLE XB = 1.0,3.0, -0.2,0.1, 0.5,1.7 / Window opening on facade + +------------------------ + +BNDF QUANTITY = 'GAUGE HEAT FLUX'/ +BNDF QUANTITY = 'WALL TEMPERATURE'/ +SLCF QUANTITY = 'TEMPERATURE', PBX = 2.0 / +SLCF QUANTITY = 'TEMPERATURE', PBY = 2.0 / + +&TAIL / \ No newline at end of file diff --git a/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_static_geom.txt b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_static_geom.txt new file mode 100644 index 0000000000..c9e3d43cd1 --- /dev/null +++ b/Validation/TUS_Facade/FDS_Input_Files/CATF/TUS_static_geom.txt @@ -0,0 +1,29 @@ +Static objects + +&VENT DB = 'ZMIN', SURF_ID = 'FLOOR' / Floor + +ROOM mesh 0.0,4.0, -0.1,4.1, 0.0,1.8 / Room + +&OBST XB = 0.0,4.0, -0.1,4.1, 1.7,1.8, SURF_ID='CEILING', COLOR='INVISIBLE' / Ceiling +&VENT XB = 0.0,0.0, -0.1,4.1, 0.0,1.8 SURF_ID = 'WALL' / Wall 1(side left) +&VENT XB = 4.0,4.0 -0.1,4.1, 0.0,1.8 SURF_ID = 'WALL' / Wall 2(side right) +&OBST XB = 0.0,4.0, 4.0,4.1, 0.0,1.8, SURF_ID = 'WALL' / Wall 2(back) + +Facade mesh 0.0,3.5, -3.0,-0.1, 0.0,6.0 +&OBST XB = 0.0,4.0, -0.2, 0.0, 0.0,1.8, SURF_ID6 = 'WALL','WALL','FACADE','FRONTWALL' / Facade SPECIMEN(lower part) +&OBST XB = 0.0,3.5, -0.2,-0.1, 1.8,6.0, SURF_ID = 'FACADE' / Facade SPECIMEN(upper part) +&OBST XB = 3.05,3.15,-1.4,-0.2, 0.0,6.0, SURF_ID = 'FACADE' / Side wall(wing) + +Space behind the room + mesh 0.0,4.0, 4.1,5.1, 0.0,1.8 +&VENT XB = 0.0,4.0, 5.1,5.1, 0.0,1.8, SURF_ID = 'OPEN' / Open surfaces Room back Mesh 2 +&VENT XB = 0.0,0.0, 4.1,5.1, 0.0,1.8, SURF_ID = 'OPEN' / +&VENT XB = 4.0,4.0, 4.1,5.1, 0.0,1.8, SURF_ID = 'OPEN' / +&VENT XB = 0.0,4.0, 4.1,5.1, 1.8,1.8 SURF_ID = 'OPEN' / + +Space in fron tof the facade + mesh 0.0,3.5, -3.0,-0.1, 0.0,6.0 +&VENT XB = 0.0,3.5, -3.0,-3.0, 0.0,6.0, SURF_ID = 'OPEN' / front +&VENT XB = 0.0,0.0, -3.0,-0.1, 0.0,6.0, SURF_ID = 'OPEN' / left +&VENT XB = 3.5,3.5, -3.0,-0.1, 0.0,6.0, SURF_ID = 'OPEN' / right +&VENT XB = 0.0,3.5, -3.0,-0.1, 6.0,6.0 SURF_ID = 'OPEN' / above