Coral TPU pcie/M.2 issues on Debian 12 0 - AMD am4 build

[dmandn]

Description

Hi, I'm on Debian 12, tried with a kernel 6.8 install, plus proxmox 8 with kernel 6.8.x and now I'm on Debian 12 again (another fresh install), on kernal 6.1.0-21-amd64. I have followed your steps to build and install this version of gasket-dkms and from the basic checks, things seem ok on the host, but I cannot get the TPUs to work in/with anything.

When I perform a "dmesg | grep -i apex", I get the below:

dmesg | grep -i apex
[ 16.471161] apex 0000:08:00.0: enabling device (0000 -> 0002)
[ 16.474447] apex 0000:08:00.0: Couldn't initialize interrupts: -22
[ 16.476806] apex 0000:09:00.0: enabling device (0000 -> 0002)
[ 16.480201] apex 0000:09:00.0: Couldn't initialize interrupts: -22
[ 16.482306] apex 0000:0a:00.0: enabling device (0000 -> 0002)
[ 16.488254] apex 0000:0a:00.0: Couldn't initialize interrupts: -22
[ 21.504640] apex 0000:09:00.0: Apex performance not throttled due to temperature
[ 21.504639] apex 0000:0a:00.0: Apex performance not throttled due to temperature
[ 21.504657] apex 0000:08:00.0: Apex performance not throttled due to temperature
[ 164.884046] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 164.885596] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 164.889985] apex 0000:09:00.0: Couldn't reinit interrupts: -22
[ 196.858032] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 196.861839] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 196.866137] apex 0000:09:00.0: Couldn't reinit interrupts: -22
[ 228.844407] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 228.848057] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 228.852692] apex 0000:09:00.0: Couldn't reinit interrupts: -22
[ 260.899907] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 260.903764] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 260.908369] apex 0000:09:00.0: Couldn't reinit interrupts: -22

ls -l /dev/apex*
crw-rw---- 1 root apex 120, 0 May 26 09:50 /dev/apex_0
crw-rw---- 1 root apex 120, 1 May 26 09:50 /dev/apex_1
crw-rw---- 1 root apex 120, 2 May 26 09:50 /dev/apex_2

lspci -nn | grep 089a
08:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]
09:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]
0a:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]

lsmod | grep apex
apex 28672 0
gasket 126976 1 apex

apt list apex
Listing... Done
golang-github-apex-log-dev/stable 1.1.1-3 all

apt list gasket
Listing... Error!
E: input:0-26: error: Expected pattern
gasket-dkms_1.0-18_all.deb
^^^^^^^^^^^^^^^^^^^^^^^^^^

frigate.detectors.plugins.edgetpu_tfl ERROR : No EdgeTPU was detected. If you do not have a Coral device yet, you must configure CPU detectors

I have the same symptoms with this gasket-dkms build as I had with a previous one, except the permission denied errors are gone from the dmesg output now. Still unable to clear the "Couldn't initialise interrupts: -22" error, which I assume is part of the issue? Any help would be greatly appreciated as I have been fighting with these Coral TPUs for 1 week now.

...Also please advise if this is the wrong place to ask and I will move my post to wherever can be suggested.

Click to expand!

Issue Type

Support

Operating System

Linux

Coral Device

M.2 Accelerator with dual Edge TPU

Other Devices

No response

Programming Language

No response

Relevant Log Output

Hi, I'm on Debian 12, tried with a kernel 6.8 install, plus proxmox 8 with kernel 6.8.x and now I'm on Debian 12 again (another fresh install), on kernal 6.1.0-21-amd64. I have followed your steps to build and install this version of gasket-dkms and from the basic checks, things seem ok on the host, but I cannot get the TPUs to work in/with anything.

When I perform a "dmesg | grep -i apex", I get the below:

dmesg | grep -i apex
[ 16.471161] apex 0000:08:00.0: enabling device (0000 -> 0002)
[ 16.474447] apex 0000:08:00.0: Couldn't initialize interrupts: -22
[ 16.476806] apex 0000:09:00.0: enabling device (0000 -> 0002)
[ 16.480201] apex 0000:09:00.0: Couldn't initialize interrupts: -22
[ 16.482306] apex 0000:0a:00.0: enabling device (0000 -> 0002)
[ 16.488254] apex 0000:0a:00.0: Couldn't initialize interrupts: -22
[ 21.504640] apex 0000:09:00.0: Apex performance not throttled due to temperature
[ 21.504639] apex 0000:0a:00.0: Apex performance not throttled due to temperature
[ 21.504657] apex 0000:08:00.0: Apex performance not throttled due to temperature
[ 164.884046] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 164.885596] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 164.889985] apex 0000:09:00.0: Couldn't reinit interrupts: -22
[ 196.858032] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 196.861839] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 196.866137] apex 0000:09:00.0: Couldn't reinit interrupts: -22
[ 228.844407] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 228.848057] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 228.852692] apex 0000:09:00.0: Couldn't reinit interrupts: -22
[ 260.899907] apex 0000:0a:00.0: Couldn't reinit interrupts: -22
[ 260.903764] apex 0000:08:00.0: Couldn't reinit interrupts: -22
[ 260.908369] apex 0000:09:00.0: Couldn't reinit interrupts: -22

ls -l /dev/apex*
crw-rw---- 1 root apex 120, 0 May 26 09:50 /dev/apex_0
crw-rw---- 1 root apex 120, 1 May 26 09:50 /dev/apex_1
crw-rw---- 1 root apex 120, 2 May 26 09:50 /dev/apex_2

lspci -nn | grep 089a
08:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]
09:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]
0a:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]

lsmod | grep apex
apex 28672 0
gasket 126976 1 apex

apt list apex
Listing... Done
golang-github-apex-log-dev/stable 1.1.1-3 all

apt list gasket
Listing... Error!
E: input:0-26: error: Expected pattern
gasket-dkms_1.0-18_all.deb
^^^^^^^^^^^^^^^^^^^^^^^^^^

frigate.detectors.plugins.edgetpu_tfl ERROR : No EdgeTPU was detected. If you do not have a Coral device yet, you must configure CPU detectors