From 9ee0b9e5e3417d6a9e8994599327abc49b7e2482 Mon Sep 17 00:00:00 2001 From: lifehackerhansol Date: Wed, 9 Oct 2024 16:51:33 -0700 Subject: [PATCH] docs: revert instances of router-link back to regular markdown --- docs/creating-an-internal-memory-card.md | 8 ++++---- docs/using-henlo.md | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/creating-an-internal-memory-card.md b/docs/creating-an-internal-memory-card.md index b0fc30112..5ca7291e9 100644 --- a/docs/creating-an-internal-memory-card.md +++ b/docs/creating-an-internal-memory-card.md @@ -6,13 +6,13 @@ sidebar: false On first generation PS Vitas, you must have a memory card to install homebrew. This is because they don't have an internal storage partition, unlike the second generation models. -Fortunately, it's possible to use VitaDeploy to re-partition the internal storage, allowing for homebrew installation without a memory card. VitaDeploy can be installed onto the system by replacing the system app "NEAR", and then formatting the system and following Using HENlo again. +Fortunately, it's possible to use VitaDeploy to re-partition the internal storage, allowing for homebrew installation without a memory card. VitaDeploy can be installed onto the system by replacing the system app "NEAR", and then formatting the system and following [Using HENlo](using-henlo) again. -This partition will only be 1GB in size. We recommend you use this to then install YAMT for use with an SD2Vita card. This is preferrable, as microSD cards are much cheaper than official Vita memory cards. +This partition will only be 1GB in size. We recommend you use this to then install [YAMT](yamt) for use with an SD2Vita card. This is preferrable, as microSD cards are much cheaper than official Vita memory cards. ### What you need -- A device with the "henlo-bootstrap" screen on it, as followed in Using HENlo +- A device with the "henlo-bootstrap" screen on it, as followed in [Using HENlo](using-henlo) ### Instructions @@ -53,4 +53,4 @@ This partition will only be 1GB in size. We recommend you use this to then insta You should now have a 1GB internal partition on your device. You can verify this by opening the Settings application and navigating to `System` -> `System Information`. -Now, you can go back to Using HENlo and follow the guide as normal. +Now, you can go back to [Using HENlo](using-henlo) and follow the guide as normal. diff --git a/docs/using-henlo.md b/docs/using-henlo.md index 8969de187..d763bc7a6 100644 --- a/docs/using-henlo.md +++ b/docs/using-henlo.md @@ -24,13 +24,13 @@ The "VitaDeploy" application will also be installed to your home screen. VitaDep 1. Launch the browser and go to the following URL on your device: `http://jailbreak.psp2.dev` 1. On the HENlo page, press `Unlock my Vita`, then press `Unlock` - + If you get an error or cannot proceed, follow our troubleshooting guide + + If you get an error or cannot proceed, follow our [troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you should be greeted by a screen titled "henlo-bootstrap" #### Section II - Installing HENkaku and VitaDeploy ::: danger -If you are on a first generation Vita without a memory card, before reading this section create an internal memory partition by following Creating an internal memory card. Once created, you are free to come back to this part of the guide and follow it **from the start again**. +If you are on a first generation Vita without a memory card, before reading this section create an internal memory partition by following [Creating an internal memory card](creating-an-internal-memory-card). Once created, you are free to come back to this part of the guide and follow it **from the start again**. ::: 1. Press on "Install henkaku" to enable homebrew