run command from automation

[fantnhu]

Hello!
I read in the changes that the hassio.addon_stdin service no longer works.
Can you find a solution to run this command? (Required for automation)
sudo catt -d 'Google Nest Hub' cast_site https://xxx.duckdns.org:8123/xxx/xxx?kiosk

CATT set, SSH key set, runs perfectly from terminal.

The bash runs perfectly from the terminal. I made a switch for it:

switch:
  - platform: command_line
    scan_interval: 60
    switches:
      cast_living_room_dash:
        friendly_name: "Cast living room dashboard"
        command_on: "ssh -o StrictHostKeyChecking=no -i /config/ssh/rsa_key [email protected] 'bash config/shell/cast-living-room-dash-start.txt'"
        command_off: "ssh -o StrictHostKeyChecking=no -i /config/ssh/rsa_key [email protected] 'bash config/shell/cast-living-room-dash-stop.txt'"

after pressing the switch, in the terminal log:

debug1: Server will not fork when running in debugging mode.
debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8
debug1: sshd version OpenSSH_9.0, OpenSSL 1.1.1o  3 May 2022
debug1: private host key #0: ssh-rsa SHA256:wb/F6mNCRO3/Uy6uVJnknRcmCP40Twtm+urySamLgUk
debug1: private host key #1: ssh-ed25519 SHA256:PjjUWxKHErjRq307xtWX6SjV1Qcfg8tKHXseyg3BZYQ
debug1: inetd sockets after dupping: 3, 3
Connection from 192.168.31.10 port 60528 on 192.168.31.10 port 22 rdomain ""
debug1: Local version string SSH-2.0-OpenSSH_9.0
debug1: Remote protocol version 2.0, remote software version OpenSSH_8.6
debug1: compat_banner: match: OpenSSH_8.6 pat OpenSSH* compat 0x04000000
debug1: permanently_set_uid: 22/22 [preauth]
debug1: ssh_sandbox_child: prctl(PR_SET_SECCOMP): Invalid argument [preauth]
debug1: list_hostkey_types: rsa-sha2-512,rsa-sha2-256,ssh-ed25519 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug1: kex: algorithm: [email protected] [preauth]
debug1: kex: host key algorithm: ssh-ed25519 [preauth]
debug1: kex: client->server cipher: [email protected] MAC: <implicit> compression: none [preauth]
debug1: kex: server->client cipher: [email protected] MAC: <implicit> compression: none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug1: SSH2_MSG_KEX_ECDH_INIT received [preauth]
debug1: rekey out after 134217728 blocks [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: Sending SSH2_MSG_EXT_INFO [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: rekey in after 134217728 blocks [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user hassio service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug1: userauth-request for user hassio service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug1: userauth_pubkey: publickey test pkalg rsa-sha2-512 pkblob RSA SHA256:dO8dQ2amLqVE7bYqh9RfNnBSfwcPozbskSYRCsmpew8 [preauth]
debug1: temporarily_use_uid: 1000/1000 (e=0/0)
debug1: trying public key file /etc/ssh/authorized_keys
debug1: fd 4 clearing O_NONBLOCK
debug1: /etc/ssh/authorized_keys:1: matching key found: RSA SHA256:dO8dQ2amLqVE7bYqh9RfNnBSfwcPozbskSYRCsmpew8
debug1: /etc/ssh/authorized_keys:1: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding
Accepted key RSA SHA256:dO8dQ2amLqVE7bYqh9RfNnBSfwcPozbskSYRCsmpew8 found at /etc/ssh/authorized_keys:1
debug1: restore_uid: 0/0
Postponed publickey for hassio from 192.168.31.10 port 60528 ssh2 [preauth]
debug1: userauth-request for user hassio service ssh-connection method publickey [preauth]
debug1: attempt 2 failures 0 [preauth]
debug1: temporarily_use_uid: 1000/1000 (e=0/0)
debug1: trying public key file /etc/ssh/authorized_keys
debug1: fd 4 clearing O_NONBLOCK
debug1: /etc/ssh/authorized_keys:1: matching key found: RSA SHA256:dO8dQ2amLqVE7bYqh9RfNnBSfwcPozbskSYRCsmpew8
debug1: /etc/ssh/authorized_keys:1: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding
Accepted key RSA SHA256:dO8dQ2amLqVE7bYqh9RfNnBSfwcPozbskSYRCsmpew8 found at /etc/ssh/authorized_keys:1
debug1: restore_uid: 0/0
debug1: auth_activate_options: setting new authentication options
Accepted publickey for hassio from 192.168.31.10 port 60528 ssh2: RSA SHA256:dO8dQ2amLqVE7bYqh9RfNnBSfwcPozbskSYRCsmpew8
debug1: monitor_child_preauth: user hassio authenticated by privileged process
debug1: auth_activate_options: setting new authentication options [preauth]
debug1: monitor_read_log: child log fd closed
User child is on pid 426
debug1: permanently_set_uid: 1000/1000
debug1: rekey in after 134217728 blocks
debug1: rekey out after 134217728 blocks
debug1: ssh_packet_set_postauth: called
debug1: active: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding
debug1: Entering interactive session for SSH2.
debug1: server_init_dispatch
debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768
debug1: input_session_request
debug1: channel 0: new [server-session]
debug1: session_new: session 0
debug1: session_open: channel 0
debug1: session_open: session 0: link with channel 0
debug1: server_input_channel_open: confirm session
debug1: server_input_global_request: rtype [email protected] want_reply 0
debug1: server_input_channel_req: channel 0 request exec reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req exec
Starting session: command for hassio from 192.168.31.10 port 60528 id 0
debug1: Received SIGCHLD.
debug1: session_by_pid: pid 427
debug1: session_exit_message: session 0 channel 0 pid 427
debug1: session_exit_message: release channel 0
Received disconnect from 192.168.31.10 port 60528:11: disconnected by user
Disconnected from user hassio 192.168.31.10 port 60528
debug1: do_cleanup
debug1: do_cleanup
[07:54:14] WARNING: sshd crashed, halting add-on
[07:54:14] INFO: sshd stoped, restarting...
s6-rc: info: service legacy-services: stopping
[2022/06/28 07:54:14:6729] N: received signal: SIGTERM (15), exiting...
[2022/06/28 07:54:14:6730] N: send ^C to force exit.
[07:54:14] INFO: sshd stoped, restarting...
s6-svwait: fatal: supervisor died
s6-rc: info: service legacy-services successfully stopped
s6-rc: info: service legacy-cont-init: stopping
[07:54:14] INFO: ttyd stoped, restarting...
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped

Where is the mistake?