forked from tbnobody/OpenDTU
-
-
Notifications
You must be signed in to change notification settings - Fork 69
Builds & Examples
Thomas Schmidt edited this page Nov 5, 2023
·
22 revisions
This section lists working examples of battery backed solar installations. All examples make use of OpenDTU onBattery to manage the Inverter.
150|35 MPPT | 4x 385W | 2x 25,6V (51,2V Battery) | HM-1500
2x 100|20 MPPT | 2x 405Wp + 2x 415Wp | Pylontech 3,5kWh 48V | HM-1500
1x 150|35 MPPT | 6x 405Wp | Pylontech 4,8kWh 48V | HM‐600
Huawei R4850G2 power supply solution
Building a Housing for Pylontech Battery and Huawei R4850G2 power supply
- Home
- FAQ
- First-Time Installation
- Device Profiles (Pin Config)
- Upgrade from OpenDTU
- Getting Help
- Hilfe erhalten
- Builds & Examples
- ESP32 Versions and Memory
- Victron MPPT solar charger
- VE.Direct
- Victron Smartshunt
- Victron Smart Battery Sense
- Warning on Victron MPPT 100/20
- Pylontech battery
- Pytes battery
- Huawei AC PSU
- SBS Unipower Battery
- Jikong JK BMS
- HOYMILES
- Einschaltstrombegrenzung für Balkonkraftwerke - Inrush current limiter
- Zendure SolarFlow with OpenDTU‐OnBattery
- Live View
- Farbe des Wechselrichterfensters
- Power Meter
- Dynamic Power Limiter
- Dynamic Power Limiter ‐ (Full) Solar‐Passthrough
- Dynamic Power Limiter Limitations
- DC Voltage ‐ Load correction factor
- Battery
- Battery-Tipps
- 24V Battery issues with Hoymiles
- Home Assistant
- Grafana Dashboard
- XXL Balkonkraftwerk 1500 Watt und mehr! Worauf Ihr achten solltet!
- Wie gefährlich kann ein Balkonkraftwerk werden (FI‐Schutzschalter)
- Hardware Purchase Tipp
- Fan speed controller ‐ add temperature sensing to any fan
- Cable length(s) between battery and inverter
- Kabellänge(n) zwischen Batterie und Wechselrichter
- Diodes ‐ Bypass vs. Blocking Diodes
- Impact of high start-currents to the inverter
- Making Cables for your HOYMILES‐CAUTION