These tools allow you to convert flight data logs recorded by INAV's Blackbox feature into CSV files (comma-separated values) for analysis, or into a series of PNG files which you could turn into a video.
You can download the latest executable versions of these tools for x86_64 on Linux, MacOS or Windows (x86_64 and ia-32) from the "releases" tab above. If you're running Linux on ARM or RISCV or FreeBSD or MacOS aarch64, you can build the tools from source (instructions are further down this page).
This is a command line tool. It should be run from a "shell" (e.g. "bash", "zsh", "cmd", "powershell" etc.)
In order to converts a flight log binary ".TXT" file into CSV format, a typical usage (from the command line) would be like:
blackbox_decode LOG00001.TXTThat'll decode the log to LOG00001.01.csv and print out some statistics about the log. If you're using Windows, you can drag and drop your log files onto blackbox_decode and they'll all be decoded, but this prevents using some of the more useful options listed below. Please note that you shouldn't discard the original ".TXT" file, because it is required as input for other tools like the PNG image renderer.
If your log file contains GPS data then a ".gpx" file will also be produced. This file can be opened in Google Earth or some other GPS mapping software for analysis. You can also include more comprehensive GPS data in the log file, for example:
- Add flight date / time to the CSV
- Include GPS information in the CSV
blackbox_decode --datetime --merge-gps LOG00042.TXT
Use the --help option to show more details and all the options, for example:
INAV Blackbox flight log decoder by Nicholas Sherlock (v7.0.1 123714c, Jan 19 2024 21:36:10)
Usage:
blackbox_decode [options] <input logs>
Options:
--help This page
--version Show version, exit
--index <num> Choose the log from the file that should be decoded (or omit to decode all)
--limits Print the limits and range of each field
--stdout Write log to stdout instead of to a file
--datetime Add a dateTime column with UTC date time
--unit-amperage <unit> Current meter unit (raw|mA|A), default is A (amps)
--unit-flags <unit> State flags unit (raw|flags), default is flags
--unit-frame-time <unit> Frame timestamp unit (us|s), default is us (microseconds)
--unit-height <unit> Height unit (m|cm|ft), default is cm (centimeters)
--unit-rotation <unit> Rate of rotation unit (raw|deg/s|rad/s), default is raw
--unit-acceleration <u> Acceleration unit (raw|g|m/s2), default is raw
--unit-gps-speed <unit> GPS speed unit (mps|kph|mph), default is mps (meters per second)
--unit-vbat <unit> Vbat unit (raw|mV|V), default is V (volts)
--merge-gps Merge GPS data into the main CSV log file instead of writing it separately
--simulate-current-meter Simulate a virtual current meter using throttle data
--sim-current-meter-scale Override the FC's settings for the current meter simulation
--sim-current-meter-offset Override the FC's settings for the current meter simulation
--simulate-imu Compute tilt/roll/heading fields from gyro/accel/mag data
--imu-ignore-mag Ignore magnetometer data when computing heading
--declination <val> Set magnetic declination in degrees.minutes format (e.g. -12.58 for New York)
--declination-dec <val> Set magnetic declination in decimal degrees (e.g. -12.97 for New York)
--debug Show extra debugging information
--raw Don't apply predictions to fields (show raw field deltas)
--apply-gframe <flag> How to apply intermediate G-frames (0=ignore (default), 1=when not "late", 2=always (legacy, may cause backwards timestamps))
blackbox_decode will display some statistics about the log. It will warn you if it's missing essential metadata that effectively renders the log useless for analysis.
$ blackbox_decode corrupt-header.TXT
Decoding log 'corrupt-header.TXT' to 'corrupt-header.01.csv'...
Log 1 of 1, start 02:57.817, end 09:45.237, duration 06:47.419
Statistics
Looptime 1890 avg 460.0 std dev (24.3%)
I frames 12634 113.7 bytes avg 1437103 bytes total
P frames 169062 69.0 bytes avg 11660607 bytes total
H frames 100 10.0 bytes avg 1000 bytes total
G frames 2119 24.1 bytes avg 50991 bytes total
E frames 1 6.0 bytes avg 6 bytes total
S frames 3 45.3 bytes avg 136 bytes total
Frames 181696 72.1 bytes avg 13097710 bytes total
Data rate 445Hz 36121 bytes/s 361300 baud
3438 frames failed to decode, rendering 20444 loop iterations unreadable. 222863 iterations are missing in total (224438ms, 55.09%)
WARNING: Missing expected metadata - check for log corruption
Warning: No VBAT reference
Error: No Firmware type metadata
Error: No Firmware revision metadata
Error: No P Interval
Error: No Acc.1G metadata
Generated by INAV blackbox_decode 7.0.1 123714c
This tool converts a flight log binary ".TXT" file into a series of transparent PNG images that you could overlay onto your flight video using a video editor (like DaVinci Resolve ). Typical usage (from the command line) would be like:
blackbox_render LOG00001.TXTThis will create PNG files at 30 fps into a new directory called LOG00001.01 next to the log file.
Use the --help option to show more details:
Blackbox flight log renderer by Nicholas Sherlock (v7.0.1 for INAV, Jan 19 2024 21:36:12)
Usage:
blackbox_render [options] <logfilename.txt>
Options:
--help This page
--index <num> Choose which log from the file should be rendered
--width <px> Choose the width of the image (default 1920)
--height <px> Choose the height of the image (default 1080)
--fps FPS of the resulting video (default 30)
--mode <mode> Stick Mode (1-4)
--threads Number of threads to use to render frames (default 3)
--prefix <filename> Set the prefix of the output frame filenames
--start <x:xx> Begin the log at this time offset (default 0:00)
--end <x:xx> End the log at this time offset
--[no-]draw-pid-table Show table with PIDs and gyros (default on)
--[no-]draw-craft Show craft drawing (default on)
--[no-]draw-sticks Show RC command sticks (default on)
--[no-]draw-time Show frame number and time in bottom right (default on)
--[no-]plot-motor Draw motors on the upper graph (default on)
--[no-]plot-pid Draw PIDs on the lower graph (default off)
--[no-]plot-gyro Draw gyroscopes on the lower graph (default on)
--smoothing-pid <n> Smoothing window for the PIDs (default 4)
--smoothing-gyro <n> Smoothing window for the gyroscopes (default 2)
--smoothing-motor <n> Smoothing window for the motors (default 2)
--unit-gyro <raw|degree> Unit for the gyro values in the table (default raw)
--prop-style <name> Style of propeller display (pie/blades, default pie)
--gapless Fill in gaps in the log with straight lines
--raw-amperage Print the current sensor ADC value along with computed amperage
(At least on Windows) if you just want to render a log file using the defaults, you can drag and drop a log onto the blackbox_render program and it'll start generating the PNGs immediately.
DaVinci Resolve is one free option for turning your PNGs into a video that is synced with your flight video.
In Resolve, create a new project. On the Media tab, find your flight video and drag it from the top pane to the bottom one to add it to your media library. When prompted, choose the option to change your framerate/resolution settings to match the video you added. Now add the PNG series that you rendered with blackbox_render (it'll be represented as a single file). If the PNGs don't appear in the media library, try right clicking on the folder that contains them and
selecting "Refresh".
Now over on the Edit tab, click File -> New Timeline and click Ok. At the top left, switch over to the Media Pool. Drag and drop your flight video onto the timeline, then drag and drop the Blackbox stream onto the video track above it. You'll need to play around with the alignment between the two tracks to sync things up (I usually sync up the audio from the initial throttle-up with the throttle-up shown on the motor graph).
If your Blackbox PNGs were rendered using the default settings (30 FPS) and your flight video is 60 FPS, you'll need to right-click on the Blackbox stream and click "change clip speed". Enter 30 FPS since this is the FPS that you rendered the Blackbox PNGs at.
Save your viewers' ears by dragging the midpoint of the audio track downwards to reduce its volume, or replace the audio with your own music track!
Now on the Deliver tab, choose something like the "video sharing export" Easy Setup preset. On the left pane, choose an output folder for the "render to:" setting. Then click the "add job to render queue" button on the left. Now click the "start render" button on the right to begin rendering the output.
If you just want to download some prebuilt versions of these tools, head to the "releases" tab on the GitHub page. However, if you want to build your own binaries, or you're an unsupported platform where we haven't provided binaries, please read on.
The blackbox_decode tool for turning binary flight logs into CSV doesn't depend on any libraries, so can be built by running make obj/blackbox_decode. You can add the resulting obj/blackbox_decode program to your system path to make it easier to run.
The blackbox_render tool renders a binary flight log into a series of PNG images which you can overlay on your flight video. Please read the section below that most closely matches your operating system for instructions on getting the libcairo library required to build the blackbox_render tool.
The version is set in src/version.h. If you wish, you may override this with the environment variable BLACKBOX_VERSION (e.g. make BLACKBOX_VERSION=x.y.z-local).
The Makefile attempts to evince an environment variable BLACKBOX_COMMIT; this is set, the git commit id will also be shown as part of the version. You may override this:
$ blackbox_decode --version
7.0.1 INAV 123714c
$ BLACKBOX_COMMIT=uncommitted make
$ blackbox_decode --version
7.0.1 INAV uncommitted
You will need gcc (or clang), make and (for blackbox_render), libcairo2 (development files).
For Debian (Ubuntu etc.), you can get the tools required for building by entering these commands into the terminal:
sudo apt-get update
sudo apt-get install make gcc libcairo2-devOtherwise, search the distro package manager and install equivalents.
Then, build blackbox_render by running make obj/blackbox_render (or build both tools by just running make).
You will need clang (cc), gmake and libcairo2. Use pkg to install.
Then:
gmake
Note: These instructions need validating.
The easiest way to build is to install the [Xcode development tool][], then install an environment like [Homebrew][] or [MacPorts][] onto your system.
From MacPorts / Homebrew you need to install cairo.
Then you can run make to build blackbox_render.
MacOS blacbox_decode can also be cross-compiled on Linux using the supplied Makefile.
The tools can be cross-compiled on Linux (Win32 blackbox_decode.exe and blackbox_render.exe, Win64 blackbox_decode.exe using the supplied Makefile, or built natively in MSys2 (Win32 and Win64), using the Makefile. You will need to install the required tools and libraries (pacman -S make gcc cairo).
Historically, the tools could be built with Visual Studio Express 2013; open up the solution in the visual-studio/ folder. You'll need to include the .DLL files from lib/win32 in the same directory as your built executable. This is no longer supported and may or (more likely), may not work.
The Makefile includes an install stanza. This may be augmented by prefix to specify the installation directory prefix, which otherwise defaults to /usr/local.
For example, with prefix set to $HOME/.local:
# Note "/bin" is appended by the Makefile
make install prefix=~/.local
Results in:
$HOME/.local/bin/blackbox_decode
$HOME/.local/bin/blackbox_render
This project is licensed under GPLv3.
The binary version of blackbox_render for MacOSX is statically linked to these libraries:
- libbz2 http://www.bzip.org/ (BSD-like)
- zlib http://www.zlib.net/ (Zlib)
- libcairo & libpixman http://cairographics.org/ (LGPL)
- libfreetype http://www.freetype.org/ (BSD-like/GPLv2)
- libpng16 http://www.libpng.org/pub/png/libpng.html (PNG)
The windows binary (win32) of blackbox_render additionally ships with these DLLs:
- libiconv https://www.gnu.org/software/libiconv/ (LGPL)
- libfontconfig http://www.freedesktop.org/wiki/Software/fontconfig/
- libxml2 http://xmlsoft.org/ (MIT)
- liblzma http://tukaani.org/xz/ (Public Domain)
The source distribution includes the source for these libraries as well object libraries for MacOS and Windows. Linux and FreeBSD will use the currently installed OS versions.
This font is included with source distributions:
- Source Sans Pro - Regular https://github.com/adobe-fonts/source-sans-pro (SIL Open Font license)
Both binary and source builds include IMU code from Baseflight https://github.com/multiwii/baseflight (GPLv3)