From 6f15cf7c9cc650b82ed1e08955b47e82775622e5 Mon Sep 17 00:00:00 2001 From: Evefg4 Date: Mon, 13 Nov 2017 11:29:59 -0700 Subject: [PATCH] update to image paths --- plant-lighting-system/javascript/README.md | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/plant-lighting-system/javascript/README.md b/plant-lighting-system/javascript/README.md index a65e3a1e..4d5c2d4d 100644 --- a/plant-lighting-system/javascript/README.md +++ b/plant-lighting-system/javascript/README.md @@ -16,13 +16,18 @@ For all the samples in this repository, see the ![General Setup Instructions](./ You need to have a Grove\* Shield connected to an Arduino\* compatible breakout board to plug all the Grove\* devices into the Grove\* Shield. Make sure you have the tiny VCC switch on the Grove\* Shield set to **5V**. +### Grove\* +![](./../../plant-lighting-system/images/lighting-grove.JPG) + Sensor | Pin --- | --- Grove\* Light Sensor | A0 Grove\* Moisture Sensor | A1 Grove\* RGB LCD | I2C -### Connecting the DFRobot\* sensors +### DFRobot\* + +![](./../../plant-lighting-system/images/lighting-dfrobot.JPG) You need to have a LCD Keypad Shield connected to an Arduino\* compatible breakout board to plug all the DFRobot\* devices into the LCD Keypad Shield.