Skip to content

Latest commit

 

History

History
146 lines (103 loc) · 5.22 KB

README.md

File metadata and controls

146 lines (103 loc) · 5.22 KB
Raw

About musl-cross

This is a small suite of scripts and patches to build a musl libc cross-compiler. Prebuilt cross and native compilers are available at http://musl.codu.org/

For the impatient, ./build.sh should build a cross compiler to /opt/cross/<arch>-linux-musl, no muss, no fuss. Otherwise, you can edit config.sh to make cross-compilers to other architectures, and even copy config.sh to another directory then run build.sh from there to avoid polluting the source dir.

About this fork

This fork of musl-cross is here to help the intelligent-agent team build a proper or1k cross-build toolchain for the integration of Klipper on the Recore board, which uses the AR100 for PID-loop controls.

Anything beyond the integration of or1k with a host aarch64 architecture will be referred upstream.

Project Scope

Supported are GCC 4.0.3 until 5.3.0. for newer GCCs check out the musl-cross-make project.

Notes on building normal cross compilers

  • For ARM, you must set the triple to arm-linux-musleabi (eabi is the important bit here)

  • You can set versions of binutils, GCC or musl in config.sh with:

      BINUTILS_VERSION=<version>
  GCC_VERSION=<version>
  MUSL_VERSION=<version>

  • You can set configure flags for each step:

      BINUTILS_CONFFLAGS=...
  GCC_BOOTSTRAP_CONFFLAGS=...
  MUSL_CONFFLAGS=...
  GCC_CONFFLAGS=...

  • You can use a git checkout of musl with:

      MUSL_VERSION=<git tag or commit>
  MUSL_GIT=yes

  • If you do not have the GMP, MPFR and/or MPC development libraries on your host, you can build them along with GCC with a config.sh line:

      GCC_BUILTIN_PREREQS=yes

Recommendations

  • If you would like to target a specific CPU revision, usually this is done by GCC configuration options like so:

      GCC_BOOTSTRAP_CONFFLAGS="--with-cpu=armv4t"
  GCC_CONFFLAGS="--with-cpu=armv4t"

    For ix86 however, it is more common to do this by the target name, e.g. i486-linux-musl instead of i686-linux-musl.

Upgrading cross compilers

It is possible to upgrade the musl version in a musl-cross cross compiler without rebuilding the entire cross compiler prefix from scratch. Simply download and extract the new version of musl, then configure it like so:

./configure --prefix="<prefix>/<triple>" CC="<triple>-gcc"

Where <prefix> is the prefix the cross compiler root was installed/extracted to, and <triple> is the GNU-style target triple (e.g. i486-linux-musl).

Other scripts and helpers

  • config.sh is an example configuration file. In many cases, it will do exactly what you want it to do with no modification, which is why it's simply named config.sh instead of, e.g., config-sample.sh

  • extra/build-gcc-deps.sh will build the dependencies for GCC into the build prefix specified by config.sh, which are just often a nice thing to have. It is of course not necessary.

  • extra/build-tarballs.sh builds convenient musl cross-compiler tarballs in a rather inconvenient way. It first builds a musl cross-compiler to the host platform (e.g. i686), then it uses that to build static cross-compilers to various platforms. As a result, building e.g. three cross-compiler tarballs involves eight compiler build phases (read: this is slow). However, the resultant tarballs are cross-compilers statically linked against musl, making them stable and portable.

  • config-static.sh is an example configuration file for building a static cross-compiler. You can use this if, e.g., you already have a build of musl (and so have musl-gcc) but would like to make a complete, static cross-compiler based on that, or if you already have a musl cross-compiler (and so have <arch>-linux-musl-gcc) but would like to make a static cross-compiler itself compiled against musl.

Requirements

musl-cross depends on:

  • shell and coreutils (busybox is fine)
  • mercurial or git (for checkout only)
  • wget (busybox is fine)
  • patch
  • gcc
  • make
  • awk (busybox is fine)

The following are GCC dependencies, which can be installed on the host system, or installed automatically using GCC_BUILTIN_PREREQS=yes:

  • gmp
  • mpfr
  • mpc

Building GMP additionally requires m4.

Compiler/Arch Compatibility Matrix

i?86 x86_64 x32 mips powerpc arm7 armhf mb sh4 or1k
4.4.7 yes yes yes yes yes
4.5.4 yes yes yes yes yes
4.6.4 yes yes yes yes yes
4.7.4 yes yes yes yes yes yes yes
4.8.5 yes yes yes yes yes yes yes yes yes
4.9.3 yes yes yes yes yes yes yes yes yes
5.3.0 yes yes yes yes yes yes yes yes yes *

* or1k requires integration of a patch (issue #61)