Skip to content

Reproducing Paper Results

Jump to bottom Edit New page
Ramon Fontes edited this page May 23, 2016 · 96 revisions

Paper - Mininet-WiFi: Emulating Software-Defined Wireless Networks - (Best Paper Award!)

To reproduce the results of the paper you have two alternatives:

  1. Virtual Machine: following the instructions in /home/mininetwifi/paper directory.

  2. Docker: following the instructions in /paper directory.

Click here to get a Virtual Disk or Docker Image

Extended abstract - Towards an Emulator for Software Defined Wireless Networks

Case 1: [Video] (https://www.youtube.com/watch?v=_C4H2gBdyQY) (expected results from version 1.5r1)

  1. Get the code [here] (https://github.com/intrig-unicamp/mininet-wifi/blob/master/demos/allWirelessNetworksAroundUs.py)

  2. Execute the code

  3. mininet-wifi> xterm sta1 h1

  4. In station (sta1) terminal: cvlc -vvv v4l2:///dev/video0 --input-slave=alsa://hw:1,0 --mtu 1000 --sout '#transcode{vcodec=mp4v,vb=800,scale=1,acodec=mpga,ab=128,channels=1}: duplicate{dst=display,dst=rtp{sdp=rtsp://10.0.0.10:8080/helmet.sdp}'

  5. And finally in the host (h1) terminal: cvlc rtsp://10.0.0.10:8080/helmet.sdp

DEMO - Mininet-WiFi: Emulação de Redes Sem Fio Definidas por Software com suporte a Mobilidade

Case 1 - Simple test

sudo mn --wifi
mininet-wifi>sta1 ping sta2
mininet-wifi>sta1 iwconfig
mininet-wifi>sta2 iwconfig

Case 2 - Communication among stations and hosts/Verifying flow table

sudo python examples/wifiStationsAndHosts.py
mininet-wifi>nodes
mininet-wifi>sh ovs-ofctl dump-flows ap1
mininet-wifi>sta1 ping h3
mininet-wifi>sh ovs-ofctl dump-flows ap1

Case 3 - Changing the controller (from reference to external controller)

Open the code examples/wifiStationsAndHosts.py and make the following changes:

  • net = Mininet( controller=Controller, link=TCLink, switch=OVSKernelSwitch )
    net = Mininet( controller=RemoteController, link=TCLink, switch=OVSKernelSwitch )
  • c0 = net.addController('c0', controller=Controller, ip='127.0.0.1' )
    c0 = net.addController('c0', controller=RemoteController, ip='127.0.0.1' )

sudo python examples/wifiStationsAndHosts.py
mininet-wifi>sta1 ping h3

Case 4 - Changes at runtime

sudo python examples/wifiPosition.py
mininet-wifi>sta1 iwconfig
mininet-wifi>sta1 ping sta2
mininet-wifi>py sta1.moveStationTo('70,40,0')
mininet-wifi>sta1 iwconfig
mininet-wifi>sta1 ping sta2
mininet-wifi>py sta1.setRange(50)
mininet-wifi>sta1 iwconfig
mininet-wifi>sta1 ping sta2

Case 5 - Bridging physical and virtual emulated environments

sudo python demos/sbrc.py
At this moment users attending the conference will be invited to connect their mobile devices into the physical/emulated environment.

Paper - (In Progress)

Case 1 (Multipath TCP): You have to install [mptcp] (www.multipath-tcp.org) and ifstat to reproduce this use case. In order to allow the communication we used pox controller with spanning tree enabled.

This command can be used to enable spanning tree:

./pox.py forwarding.l2_learning openflow.spanning_tree --hold-down log.level --DEBUG samples.pretty_log openflow.discovery host_tracker info.packet_dump

Starting the environment:

1.sudo python demos/mptcp.py
2. mininet-wifi> xterm sta1 h10
3. mininet-wifi> sta1 ifstat

In h10 terminal:
  1. iperf -s
In sta1 terminal:
  1. iperf -c 192.168.1.254
Topology:

topology

Expected results:

iperf

Paper - (In Progress) - Video

Note: We have noticed that for some reason the AP stops working after few minutes from the moment that a mobile device is connected to the AP attached to the VM. So, we update the code in order to allow you reproduce this case using the host instead of VM.

####Requirements to reproduce:

  1. (no need anymore) You have to use a Virtual Machine - one interface mode nat enabled.
  2. USB WiFi dongle - attached to the Virtual Machine (attached to the host in the current code)
  3. Floodlight OpenFlow controller - latest version
  4. ofsoftswitch13 - https://github.com/CPqD/ofsoftswitch13
  5. Speedtest-cli
  6. It is a good idea disable the network manager (service network-manager stop)

####Important (changes in the code):

  • You have to set the wlan interface created by your USB WiFi dongle:
    e.g. phyap1 = net.addPhysicalBaseStation( 'phyap1', ssid= 'ap-ssid1', mode= 'g', channel= '6', position='170,185,0', wlan='wlan1' )
  • You have to set the wlan that is connected to the Internet:
    e.g. net.addOfDataPath('ap3', 'wlan0')

  1. Getting the code [here] (https://github.com/intrig-unicamp/mininet-wifi/blob/master/demos/hybridVirtualPhysical.py)
  2. Executing the Floodlight OpenFlow controller: java -jar target/floodlight.jar
  3. Executing the code: sudo py hybridVirtualPhysical.py
  4. Now, stations should be able to communicate with the Internet
  5. You can use any station connected to any Access Point and try it out:
    mininet-wifi>xterm staX and run speedtest-cli - Using speedtest-cli you test Download and Upload speed of your internet connection. The available bandwidth is controlled by OpenFlow meter entries.
  6. You can use any mobile device to communicate with stations in Mininet-WiFi and also the Internet if the device is associated to the Access Point.
Add a custom footer
Clone this wiki locally