Skip to content

Latest commit

 

History

History
 
 

psoc6

README.md

PSoC6 port

This port is intended to run on Infineon PSoC™ 6 microcontrollers.

Pre-requisites

The following port is using Infineon ModusToolbox™ to resolve the specific PSoC™ board resources and building flags. Before working with micropython:

  1. Install ModusToolbox. Minimum version required is 3.0.

  2. In order to use the same gcc for compiling both mpy sources and ModusToolbox™ add also the latest to the system PATH.

    export PATH=/home/{user}/ModusToolbox/tools_{version}/gcc/bin:$PATH

Building and running Linux version

As we are working on the ports/psoc6 branch (for now), first checkout that branch after cloning this repo:

git checkout --track origin/ports/psoc6

Then initialize the ModusToolbox™ environment:

make mpy_mtb_init

Build the firmware:

make

To build and program the device:

make mpy_program

Working from WSL

If you are working from WSL and you cannot access the USB resources of your machine. Copy the .hex file from ports/psoc6/boards/{board}/mtb-app/APP_{board}/Debug/{hexname}.hex to some location in your windows machine where you can flash the device with Cypress Programmer.

Run micropython

Use any serial terminal (putty, minicom..) and establish a session with your device with 115200 bauds and 8-N-1 configuration.