RaspberryMatic 3.75.7.20240420 #2719
Replies: 2 comments 2 replies
-
Hallo, nutze das Addon mit Home Assistant auf einem Mini-PC. Nach Update Einspielung ist es mir nicht mehr möglich auf Raspberrymatic zuzugreifen. Bad Gateway 502 Add-On scheint noch nicht bereit zusein, möglicherweise startet es noch. Und nun? |
Beta Was this translation helpful? Give feedback.
-
Hallo zusammen, |
Beta Was this translation helpful? Give feedback.
-
This is release 3.75.7.20240420 of RaspberryMatic which is a maintenance release with the following bugfixes and feature changes:
Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag
🚧 Changes:
For all changes, see the full commit log.
CCU/HomeMatic service changes:
S47InitRFHardware
init script to accept aHMRF_ADDRESS
of0x000000
and then generate a random RF address in these cases becausedetect_radio_module
can return0x000000
even if a RF module is BidCos/HmRF capable. (cf. https://homematic-forum.de/forum/viewtopic.php?f=65&t=82127).WebUI changes:
0119-WebUI-Fix-ProofAndSetValue
WebUI patch to comply with OCCU 3.75.7 changes.Operating system changes:
STOPSIGNAL SIGTERM
to default Dockerfile to explicitly make sure SIGTERM is used as a default stop signal if running in an OCI environment either under docker or podman (Sauberes Herunterfahren in Podman Setup benötigt expliziten Aufruf von --stop-signal=SIGTERM #2717).S00watchdog
init script so that the watchdog daemon will not be started in virtual OCI/LXC environments which could otherwise affect the watchdog environment of the corresponding host system (Sauberes Herunterfahren in Podman Setup benötigt expliziten Aufruf von --stop-signal=SIGTERM #2717).install-docker.sh
script wich should make use of this script slightly more comfort.BR2_LINUX_KERNEL_INSTALL_INTREE_OVERLAYS
to allow to install device tree overlays build with the kernel. Thus, adapted the rpi builds to use this new option and to completely refrain from using theRPI_FIRMWARE
package for deploying the device tree overlay files.fixup.dat
/start.elf
references inconfig.txt
of rpi5 platform.CONFIG_WERROR
since buildroot disables it anyway.BR2_CCACHE_DIR
exists upon fresh execution.rpi-eeprom-info
tool to output current RaspberryPi5 EEPROM/bootloader version and output if an update is available or not based on thepieeprom.upd
file in/boot
.install-lxc.sh
script to perform slightly different default network bridge check than simply checking for the first line inbrctl
. (LXC installation fails when multiple bridges are present (i.e. docker) or brctl is missing #2683).👪 Contributors (alphabetically):
📝 Support:
For support on installation and help please visit the following web pages:
RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪
📦 Download:
The following installation archives can be downloaded for different hardware platforms. To verify their integrity a
sha256
checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included*.img
files on a fresh installation media (e.g. microSD card):RaspberryPi5 Model B – (installation):
📦 RaspberryMatic-3.75.7.20240420-rpi5.zip
SHA256: 8f4aac125d60d0f7338d62272916096c02106efeebbaf031e5748180b1731a35
RaspberryPi4 Model B, RaspberryPi Compute Module 4, RaspberryPi 400 – (installation):
📦 RaspberryMatic-3.75.7.20240420-rpi4.zip
SHA256: 0151faf2a045c069a0180afe21030e601867e5b4cc27bf2558f6ad4815d758e1
CCU3, ELV-Charly, RaspberryPi3 Model B+, RaspberryPi3 Model B, RaspberryPi3 Model A+, RaspberryPi Compute Module 3, RaspberryPi Compute Module 3 lite, RaspberryPi Zero 2 W – (installation):
📦 RaspberryMatic-3.75.7.20240420-rpi3.zip
SHA256: d8b6ce28f28f645a755cde387bbdf8b4c53d03f854018801dccceecb9d731c6e
📦 RaspberryMatic-3.75.7.20240420-ccu3.tgz (only for initial CCU3 Firmware -> RaspberryMatic Upgrade)
SHA256: e48a8182982af42aaa63598e7b7be9ff8b7beba0188858e0faa68da54bd4d99d
RaspberryPi2 Model B – (installation):
📦 RaspberryMatic-3.75.7.20240420-rpi2.zip
SHA256: 868093a8ed193d1bca23a8d31bbf240aa72a6105475f79e4377bc65864d3cf48
RaspberryPi Zero W, RaspberryPi Zero, RaspberryPi Compute Module 1, RaspberryPi1 (A+/B+) – (installation):
📦 RaspberryMatic-3.75.7.20240420-rpi0.zip
SHA256: d23f8c194fb57280c1872828e27f47da58bac069d77faf1b5da539f59f66ae92
TinkerBoard S, TinkerBoard – (installation):
📦 RaspberryMatic-3.75.7.20240420-tinkerboard.zip
SHA256: c4e9e924d4a91c96fc4a621f2ca44afa1717e31d862e90577f978372f10767de
ODROID-N2/N2+/C4/C2 – (installation):
📦 RaspberryMatic-3.75.7.20240420-odroid-n2.zip
SHA256: 2ff1183d258781a858e5c56d57474732c55ec07fc7d25d5a52ddaf90b881762b
📦 RaspberryMatic-3.75.7.20240420-odroid-c4.zip
SHA256: 3700cfae91ecc99c3b9f855c16a403c934fdb25d4019896cd538dfced7f16896
📦 RaspberryMatic-3.75.7.20240420-odroid-c2.zip
SHA256: e8455c84c87eedd35d2d48f0016d496e8cf57accb1af309b150fcb19a7171af2
Intel NUC – (installation):
📦 RaspberryMatic-3.75.7.20240420-intelnuc.zip
SHA256: 125419fe80e581bebd423f523ae7e4608370a475d338d95bfe52069a520715b9
Open Virtual Appliance (OVA) – (ProxmoxVE, VirtualBox, ESXi, Synology, QNAP, Workstation Player, QEmu, UNRAID, HyperV):
📦 RaspberryMatic-3.75.7.20240420-ova.zip
SHA256: ec2a1b1ff86e844389cbf7d06ef6fbe74b9e8ac92a336b3b9f91bb55680910fe
📦 RaspberryMatic-3.75.7.20240420.ova (only for initial OVA installation)
SHA256: 5848ad45bc2891fcaca8e903a3409b941a3961f712e891038a1709d6db15a83d
Docker / Open Container Initiative (OCI) – virtual appliance (installation):
📦 RaspberryMatic-3.75.7.20240420-oci_amd64.tgz (amd64/x86_64)
SHA256: e10de62b7e536a40cf42af8a31a8549da0c743637e6a26f67b03d0ee78a6a47f
📦 RaspberryMatic-3.75.7.20240420-oci_arm64.tgz (arm64/aarch64)
SHA256: a6bd1f1b5f8e7e6c58e0411a03d2eb532ddd4bc8d7c944b3b931cf6db168d0c1
📦 RaspberryMatic-3.75.7.20240420-oci_arm.tgz (arm/armhf)
SHA256: 534141e37964c65c356b823e88fd6030bfb7330705bbd21f2bedeb5b3f905e85
LXC Container – virtual appliance (installation):
📦 RaspberryMatic-3.75.7.20240420-lxc_amd64.tar.xz (amd64/x86_64)
SHA256: 89125818b1f52832cb874d4b760df03b4e9dec980fe817d163949c460b0fa1da
📦 RaspberryMatic-3.75.7.20240420-lxc_arm64.tar.xz (arm64/aarch64)
SHA256: 6db3d4508f79e94c1680973087ca50c8deb2b20d30df3b5b2a90e46f01cab57b
📦 RaspberryMatic-3.75.7.20240420-lxc_arm.tar.xz (arm/armhf)
SHA256: 50844fd2475f23a10120a69c8ed1f760fa564ac592b918cbd13d90f5d9e979a1
Generic-aarch64 Appliance – (ProxmoxVE):
📦 RaspberryMatic-3.75.7.20240420-generic-aarch64.zip
SHA256: 7e7d1139747694607809ee610594d0cfe8a52e496c12bcb1a2b72f84245ff51e
Kubernetes / K8s – virtual appliance:
see install documentation
Home Assistant Add-on – virtual appliance:
see install documentation
This discussion was created from the release RaspberryMatic 3.75.7.20240420.
Beta Was this translation helpful? Give feedback.
All reactions