bindtomac-bridged-bond-httpks.ks.in

#test name bindtomac-bridged-bond
%ksappend repos/default.ks

network --device=@KSTEST_NETDEV1@ --bootproto=dhcp --onboot=yes --activate
network --device=bond0   --bondslaves=@KSTEST_NETDEV2@,@KSTEST_NETDEV3@ --bondopts=mode=balance-tlb --noipv4 --activate --bindto=mac
#network --device=bridge0  --bridgeslaves=bond0 --bootproto=static --ip=192.168.124.233 --netmask=255.255.255.0 --gateway=192.168.124.1 --hostname=devel --nameserver=10.34.39.2 --activate
network --device=bridge0  --bridgeslaves=bond0 --bootproto=dhcp --activate

bootloader --timeout=1
zerombr
clearpart --all
autopart

keyboard us
lang en
timezone America/New_York
rootpw qweqwe
shutdown

%packages
%end

%post --nochroot

@KSINCLUDE@ post-nochroot-lib-network.sh

check_bridge_has_slave_nochroot bridge0 bond0 yes
# TODO fix
check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ bond0 bridge0

%end

%post

@KSINCLUDE@ post-lib-network.sh

check_device_connected bridge0 yes
check_device_config_value bond0 BRIDGE bridge0 connection master bridge0
check_device_config_value bond0 BRIDGE bridge0 connection slave-type bridge
check_device_config_value bond0 BONDING_OPTS mode=balance-tlb bond mode balance-tlb
check_config_exists bridge0_slave_1 no
check_bond_has_slave bond0 @KSTEST_NETDEV2@ yes
check_bond_has_slave bond0 @KSTEST_NETDEV3@ yes
check_bond_has_slave bond0 @KSTEST_NETDEV1@ no
check_device_has_ipv4_address bridge0 yes
check_device_has_ipv4_address bond0 no

check_device_config_bound_to_mac bond0_slave_1
check_device_config_bound_to_mac bond0_slave_2

# WARNING: this depends on assumption of running %post scripts in order they
# are defined here

# No error was written to /root/RESULT file, everything is OK
if [[ ! -e /root/RESULT ]]; then
   echo SUCCESS > /root/RESULT
fi
%end