7.2.0beta1

DO NOT INSTALL THIS RELEASE IF YOU ARE NOT INVITED TO DO SO

This pre-release is a preview of the new feature: #872 - [Feature request] - Add native support of virtual switch in over_switch VTherm

Extract of the README-fr:

Quoi de neuf ?

• Release 7.2:

• Prise en compte native des équipements pilotable via une entité de type select (ou input_select) ou climate pour des VTherm de type over_switch. Cette évolution rend obsolète, la création de switch virtuels pour l'intégration des Nodon ou Heaty ou eCosy ... etc. Plus d'informations ici.

• Lien vers la documentation : cette version 7.2 expérimente des liens vers la documentation depuis les pages de configuration. Le lien est accessible via l'icone . Elle est expérimentée sur la page de configuration des sous-jacents des VTherm over_switch.

7.1.6

What's Changed

• [Feature Request] - Power shedding should prevent all VTherm to start at the same time by @jmcollin78 in #845
• Fixes on FR translation by @ericsche in #851
• Issue #846 - switch Eco preset after Window close event by @jmcollin78 in #868

New Contributors

• @ericsche made their first contribution in #851

Full Changelog: 7.1.5...7.1.6

7.1.6beta1

What's Changed

• [Feature Request] - Pwoer shedding should prevent all VTherm to start at the same time by @jmcollin78 in #845

Full Changelog: 7.1.5...7.1.6beta1

7.1.5

What's Changed

• #823 - window configuration don't hold on VTherm configuration by @jmcollin78 in #839
• #828 - hvac_off_reason could stay at auto_start_stop when the VTherm is 'on' (hvac_mode=Heat) by @jmcollin78 in #840
• #829 - [Feature Request] - Resend state to underlying device is device switch from Unknown state. by @jmcollin78 in #841

Full Changelog: 7.1.4...7.1.5

7.1.4

What's Changed

• Issue #820 - improve power shedding algorithm by @jmcollin78 in #821

Full Changelog: 7.1.3...7.1.4

Issue #820 - improve power shedding algorithm

Do not install this release if you are not invited to do so.

This pre-release tries to fix this issue:

Issue #820 - improve power shedding algorithm

It adds a check at VTherm underlying device startup to check if power is available. If not the Vtherm wil be shed.

7.1.3

What's Changed

• Issue #804 - cannot set preset when follow is activated by @jmcollin78 in #812
• Issue #779 - error in ValveOpenPercent sensor at startup by @jmcollin78 in #814
• Allow to enter 3 digits after dot values in coef_ext.
• some documentation improvements

Full Changelog: 7.1.2...7.1.3

Try to fix #804 (bis)

Do not install this pre-release if you are not invited to do so.

This pre-release is another rty to fix the #804 issue.

Try to fix #804

Do not install this pre-release if you are not invited to do so.

This pre-release tries to fix the issue #804 - cannot set preset when follow is activated.

It adds some logs and add the missing reset _last_regulation_change datetime when the setpoint is sent to the underlying device.

7.1.2 - community fixes and improvements

What's Changed

• issue #759 - Frost temperature setpoint doesn't update with presence by @jmcollin78 in #794
• Issue #791 - add window turn off delay by @jmcollin78 in #809
• Issue #805 - improve valve regulation config texts by @jmcollin78 in #810
• issue #807 - send temperature only if in the feature by @jmcollin78 in #811

Full Changelog: 7.1.1...7.1.2