[MRS 1.80] error spam after physical disconnection

[jnk0le]

it can OOM eclipse

touching loose wire etc. (unrecoverable)

Error: OpenOCD only supports Debug Module version 2 (0.13) and 3 (1.0), not 15 (dmstatus=0xffffffff). This error might be caused by a JTAG signal issue. Try reducing the JTAG clock speed.
Error: [wch_riscv.cpu.0] Hart is unavailable.
Error: [wch_riscv.cpu.0] Hart doesn't exist.
Info : [wch_riscv.cpu.0] Hart unexpectedly reset!
Error: OpenOCD only supports Debug Module version 2 (0.13) and 3 (1.0), not 15 (dmstatus=0xffffffff). This error might be caused by a JTAG signal issue. Try reducing the JTAG clock speed.
Error: [wch_riscv.cpu.0] Hart is unavailable.
Error: [wch_riscv.cpu.0] Hart doesn't exist.
Info : [wch_riscv.cpu.0] Hart unexpectedly reset!

USB disconnection

Error: OpenOCD only supports Debug Module version 2 (0.13) and 3 (1.0), not 0 (dmstatus=0x0). This error might be caused by a JTAG signal issue. Try reducing the JTAG clock speed.
Error: libusb_bulk_write error: LIBUSB_ERROR_IO
Error: libusb_bulk_read error: LIBUSB_ERROR_IO
Error: OpenOCD only supports Debug Module version 2 (0.13) and 3 (1.0), not 0 (dmstatus=0x0). This error might be caused by a JTAG signal issue. Try reducing the JTAG clock speed.
Error: libusb_bulk_write error: LIBUSB_ERROR_IO
Error: libusb_bulk_read error: LIBUSB_ERROR_IO