Everything seems fine but no values anywhere

[herrar1]

My Vaillant Geotherm heatpump connected to eBUS Adapter Shield v5 isn't working...

I'm using home assistant, and its available supervisor addon to run eBUSd.
Here's the logs:

s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
ebusd --foreground --mqtthost=192.168.50.13 --mqttport=1883 --mqttuser=mqttuser --mqttpass=mqttpassword --scanconfig --mqttjson --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --device=192.168.50.23:9999 --log=all:notice
2024-06-15 00:17:03.568 [main notice] ebusd 23.2.p20230716 started with auto scan on device: 192.168.50.23:9999
2024-06-15 00:17:05.034 [bus notice] bus started with own address 31/36
2024-06-15 00:17:05.045 [bus notice] signal acquired
2024-06-15 00:17:05.062 [mqtt notice] connection established
2024-06-15 00:17:09.002 [bus notice] max. symbols per second: 121
2024-06-15 00:17:26.039 [bus notice] max. symbols per second: 160
2024-06-15 00:19:15.496 [main notice] update check: version 23.3 available

But still no values...? In the documentation everything is told to automatic, including the config file, but

[herrar1]

One small mistake... I just had to select the addon mode to be "ens:192.168.50.23:9999" and BOOM i got entities!!!