Home Assistant auto discovery #518
Replies: 37 comments 115 replies
-
|
Oh my God!!! @john30 you are the KING! I've waiting for this feature from the beginning of using ebusd!!! Edit: updated to new version and it works!!! Thank you!!! |
Beta Was this translation helpful? Give feedback.
-
|
what do you want to modify exactly? since this is highly dynamic, you'd have to adjust the settings in /etc/ebusd/mqtt-hassio.cfg to achieve the desired changes |
Beta Was this translation helpful? Give feedback.
-
|
@andrejs2 sorry for off topic, but would you mind sharing your HA configs? Seems that ive been trying to create a similar thing as you and it does partially work, but had some problems which i cannot fix (like with input selects for modes). Surely the whole community would greatly benefit from each others configs. |
Beta Was this translation helpful? Give feedback.
-
|
@Dinth sure, here it is. But caution, it's bugged and for vaillant vwl geotherm (circuits...), and without mqttjson option...and part of it is written in Slovene language :), sorry. `sensor:
switch:
input_select: input_number: input_datetime: climate:
automation:
` |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. That's very interesting because you took a very similar approach to input_selects as myself, but while my input_numbers work perfectly fine, input_selects often glitch (for example changing the mode in HA doesnt change the mode on the boiler controls or other way around - changing mode on boiler controls quickly resets it back to the value set in HA). Will need to look into that again. A couple of questions:
|
Beta Was this translation helpful? Give feedback.
-
|
@Dinth
Have you seen this? |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @john30 for the feedback and all the work you put into this project, I think this upgrade is really opening another new level. There are number od options to change (switch (on-off), select,...I use them to select desired room temp, heating curve, backup mode, storage load, heating circuit mode (auto, off, on...).
input_select: input_number: input_datetime: Anyway I'll dig into the config file. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
ah, you mean writable values. yes, those are supported as well and if you change the mqtt-hassio.cfg line 114 to "filter-direction = r|u|^w", then write messages are included - by default they are not, as this really opens up a lot stuff that can be done wrong by a simple click on HA UI. You don't need to change the file itself, instead you can also pass another ebusd start parameter overriding the line like this: |
Beta Was this translation helpful? Give feedback.
-
|
@john30 thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @john30, MQTT autodiscovery works really well out the box and makes managing entities much easier. I have updated the HA add-on to configure this automatically so people have a one click solution to get eBUSd data into Home Assistant. A couple of observations:
|
Beta Was this translation helpful? Give feedback.
-
|
Also is there a way to exclude readings i.e. you can use filter-name to include a reading but is there a way to do the opposite and exclude readings. |
Beta Was this translation helpful? Give feedback.
-
|
guess the right thing to do would be to set the field name to onoff as well in the inc:43. then it will be picked up by the hassio cfg. if you don't want to change that, then matching it by message name is the right thing to do from my perspective. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @john30 for a great piece of software and integrating it with Home Assistant. |
Beta Was this translation helpful? Give feedback.
-
|
Check your config. The text above had only one --mqttvar but in the email alert I got from GitHub it looked like you had entered --mqttvar--mqttvar |
Beta Was this translation helpful? Give feedback.
-
|
Yes and correct it.... and nothing |
Beta Was this translation helpful? Give feedback.
-
|
Sometime when look in entities in integration on ebus 700 and show correct room tem and desired but sometimes show no correct. I dont know why.... |
Beta Was this translation helpful? Give feedback.
-
|
Ok i try and install addon EBUSD EDGE and it works better and looks ok. But still some sensors i have with status UNKNOW. But when by automation i send command example ebusd/700/prfuelsumhc/get it update and now sensors show value. But why when user auto discovery and found this sensor no update automaticallly it as other whis auto update value ? |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @john30 . I've spent some time trying to understand mqtt-hassio.cfg and I've now got it working with edge |
Beta Was this translation helpful? Give feedback.
-
|
Hi
On old config also example i get info about water pressure but now i dont see this entiti |
Beta Was this translation helpful? Give feedback.
-
|
same as above: adjust the filters |
Beta Was this translation helpful? Give feedback.
-
|
@john30 and what about his first question?
I experience the same issue. And today I had some time to collect more info on it. Log in ebusd shows 20.975 degrees: MQTT explorer value shows 20 degrees: And Home Assistant (obviously also shows 20 degrees): And if you look at the history, you see very clearly when I've upgraded to the new sensors: Any idea what is causing this? I have the feeling that the raw data from ebusd is somehow rounded (without logical rounding rules in place....). |
Beta Was this translation helpful? Give feedback.
-
|
which ebusd version do you use? there was a fix for such behaviour in 22.2 |
Beta Was this translation helpful? Give feedback.
-
|
I thought that I was using 2.22 already (since this was indicated in the add-on in HA). But in MQTT I noticed it was 22.1. So I've rebuild the HA add-on and now it's solved. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I was running everything fine until this last version. I am not able to write to sensor values anymore, i get a message like:
i have read to add a command on startup and my configuration at start is like this:
is there anything missing? how to solve? |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
I'm starting to struggle with the auto-detect version. So the question is, is it me or does writing with auto-detect no longer work? |
Beta Was this translation helpful? Give feedback.
-
|
same as above |
Beta Was this translation helpful? Give feedback.
-
|
Hi. I have a problem… I use EBUSD EDGE and use mqttvar: filter-name=status|temp|fuel|count|energy|power|runtime|hours|starts|mode|curve|^load$|^party$|cooling|heat|sensor|data|error|pressure|flame then i have sensors by auto discovery. He found me what i need.
Topic looks that work. When send by MQTT Explorer command ebusd/700/z2OpMode/get i recived: In logs no show any errors… |
Beta Was this translation helpful? Give feedback.
-
|
Hi. Sorry for bothering, but can i have a couple of questions regarding your set up of UFH with VRC700? |
Beta Was this translation helpful? Give feedback.
-
|
Is it possible to tweak mqtt-hassio.cfg to create input_selects automatically in ha? Also, is it possible to limit the range of an ha |
Beta Was this translation helpful? Give feedback.
-
|
not yet, but it is planned to be added |
Beta Was this translation helpful? Give feedback.
-
|
Hello, HA can't find my ventilation flow Configuration: What have I missed? P.S. How does polling now works with HA integration? Do we still need set polling priority? |
Beta Was this translation helpful? Give feedback.
-
|
Try capital F on flow in filter-name |
Beta Was this translation helpful? Give feedback.
-
|
doesn't matter, I think the problem is with measurement units. Measurement is air volume by m3/h. I will try to update cfg |
Beta Was this translation helpful? Give feedback.
-
|
Can't find a solution. All other FLOW is showing up, but this one, does not.
|
Beta Was this translation helpful? Give feedback.
-
|
Checked HA logs, I can not figure out what is the problem.
|
Beta Was this translation helpful? Give feedback.
-
|
Solved it... units were m³/h instead of m3/h so this caused a conflict. |
Beta Was this translation helpful? Give feedback.
-
|
But if i have entities from autodiscovery how i can create climate controller in HA example to controll Zone1 , Zone 2 and heat water ? |
Beta Was this translation helpful? Give feedback.
-
|
I'm using this configuration: <
|
Beta Was this translation helpful? Give feedback.
-
|
Hello, I'm about to install it, but struggling with the basic configuration. May I consider that the connection between HA and the eBUS Adapter 3.0 is established? Do you have an idea how to configure it? Thanks in advance |
Beta Was this translation helpful? Give feedback.
-
|
Hi, not yet got time for this. But will give an update within the next days. |
Beta Was this translation helpful? Give feedback.
-
|
I have now the values in HA! I’m working with a wifi ebus adaptater. |
Beta Was this translation helpful? Give feedback.
-
|
How did you configured it to get the values? Over SSH? |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I work with this add on https://community.home-assistant.io/t/an-ebusd-add-on/344852 and its work perfectly. |
Beta Was this translation helpful? Give feedback.
-
|
Hi I have tried it as well, but seems that auto discovery doesn’t work. |
Beta Was this translation helpful? Give feedback.
-
|
Hi all, I'm about to install it addon homeassistant with adaptor with the basic configuration:
it work with auto discovery 👍
but only sensor
I cant use in thermostat and interface. Can hel somebody for config file? i have valliant ecoteck pro with vrt380.
Equipment: |
Beta Was this translation helpful? Give feedback.
-
|
for confirm my hypothesis i want try , i think that i dont make danerous. I dont found specific information i try write procedure in my mind 👍
https://github.com/john30/ebusd-configuration/tree/master/ebusd-2.1.x/en/vaillant/ broadcast.csv IN TO home/pi/config in to 15.ctlv0.csv
IS IT CORRECT ???????? |
Beta Was this translation helpful? Give feedback.
-
|
make thi procedure and RECOGNIZE ctlv0 `s6-rc: info: service s6rc-oneshot-runner: starting
but the date is unknow
Data no correct ? |
Beta Was this translation helpful? Give feedback.
-
|
change how john30/ebusd-configuration@066bb36 and some work: `[11:23:41] WARNING: USB and network device defined. Only one device can be used at a time.
how analyze error ? 2022-12-08 11:24:03.597 [update notice] sent unknown MS cmd: 3115b5090124 / 09003231323231343030 |
Beta Was this translation helpful? Give feedback.
-
|
I complete setup this device, SOLVED |
Beta Was this translation helpful? Give feedback.
-
|
Manually add config change id for work file: BACKUOP CARTELLA IN WWW ebusd_mod_ctlv2.zip |
Beta Was this translation helpful? Give feedback.
-
|
I'm searching for alternatives for hardware adapter... The one on ebusd wiki it's almost impossible to get! |
Beta Was this translation helpful? Give feedback.
-
|
@john30 Log:
It resulted in two devices being registered: ebusd. ebusd.eu . Heating. MQTT No other devices were found. Six entities associated with the above devices appeared. Also when accessing the HassIO commandline (with Putty), I could not find the /etc/ebusd directory? |
Beta Was this translation helpful? Give feedback.
-
|
telnet into ebusd and run 'info' telnet 'your host/ip address' 8888 info this should give you a list of identified ebusd slave/master and the associated config files loaded |
Beta Was this translation helpful? Give feedback.
-
|
Hi @john30,
But only the BypassTemperature is available in HA (sorry for the german field names) Thanks in advance |
Beta Was this translation helpful? Give feedback.
-
|
@CTSchorsch You have to add something in your I hope this will help. |
Beta Was this translation helpful? Give feedback.
-
|
Yeah thanks a lot, |
Beta Was this translation helpful? Give feedback.
-
|
I try to add heating curve into MQTT-hassio.cfg but non of my syntax is working: For sensor it works: But If I add it manualy via MQTT-Explorer it work: I don't mind to have bigger min and max but steps are crucial in these case. |
Beta Was this translation helpful? Give feedback.
-
|
I have alredy make a PR for this. But it is not merged yet. |
Beta Was this translation helpful? Give feedback.
-
|
Hi. What is the best way of adding bai currenterror to mqtt-hassio? |
Beta Was this translation helpful? Give feedback.
-
|
Just add |
Beta Was this translation helpful? Give feedback.
-
|
The following definitions (holiday dates) are not auto-discovered by HA (all filters removed). How to adjust the mqtt-hassio.cfg to include them? The associated templates are: |
Beta Was this translation helpful? Give feedback.
-
|
You must add the lines from this PR to your config. Then you have it in HA. |
Beta Was this translation helpful? Give feedback.
-
|
I noticed even with the additions of #1134 in place, time entities with the datatype HTI are not automatically exposed to HA. e.g. Does it require a separate HA template definition? e.g.
Any suggestions? |
Beta Was this translation helpful? Give feedback.
-
|
Yes you can try it with that. |
Beta Was this translation helpful? Give feedback.
-
|
Hi all thx Peter |
Beta Was this translation helpful? Give feedback.
-
|
Did you try to restart the add on? |
Beta Was this translation helpful? Give feedback.
-
|
yes restart the complete nuc i see in the core changelog changes on mqtt when i restore my backup to 2024.1.5 all is fine again |
Beta Was this translation helpful? Give feedback.
-
|
But there was no change between 1.5 and 1.6 Did you restart only the addon after the restart of the hole pc? |
Beta Was this translation helpful? Give feedback.
-
|
i must apologize |
Beta Was this translation helpful? Give feedback.
-
|
Hi there, This is the mqtt-part which works:
|
Beta Was this translation helpful? Give feedback.
-
|
hi, did you solve this problem? |
Beta Was this translation helpful? Give feedback.
-
|
hi @john30, first of all, thanks a lot for creating ebusd and the ebus adapter. You're a genius! here my CSV file. |
Beta Was this translation helpful? Give feedback.
-
|
Try also comment out line with filter of topics. |
Beta Was this translation helpful? Give feedback.
-
|
@Koky05 thanks. I've tried almost everthing, but it didn't work. @john30 please disregard my comment :). |
Beta Was this translation helpful? Give feedback.
-
|
Hi @tiotuba , What else CSV have you used? Maybe that will fill my gaps I currently have. And how did you represent the "Aktorstufe"? As a HA Fan entity? |
Beta Was this translation helpful? Give feedback.
-
|
Here is mine csv. But take it just like example, it create tons of unneeded sensors. I also set in priority for all values in configuration files for my devices like 15.f47.csv: |
Beta Was this translation helpful? Give feedback.
-
|
I too need to control one parameter on my Vaillant boiler so I understand I have to change mqtt-hassio.cfg to allow writes to the ebus. As a non Linux person who is running ebusd as an add-on in Home Assistant under HASSOS, I don't know where to find the correct etc directory from a SSH session. If there's anyone patient out there, please could you advise how to change to filter-direction = r|u|^w . I assume that I will then be able to use MQTT set calls to change the value I want (which is the flowtempdesired |
Beta Was this translation helpful? Give feedback.
-
|
Hi @losip, it's a shame you have given up on such a powerful tool. FlowTempDesired is the equivalent of d.05 from your installer's menu on the boiler and you can't edit it there either! So maybe your ambition was a bit misdirected? It is however derived from other parameters that you can change like Heat Curve. Maybe start a new thread with what you are trying to achieve and I'm sure the community will help. The problem is this is quite a complex subject - IT/Technology, hydro and thermo dynamics and general engineering! Worst case- If you don't have the appetite to continue, I am sure there will be others on this forum though that would welcome your adapter at cost price though! |
Beta Was this translation helpful? Give feedback.
-
|
You're probably right @JonesGW-MGD . I may be trying to write to the wrong parameter. I just want to do remotely what you can easily do from the boiler itself, i.e. if you press the CH button, then + and - you change the target flow temperature. If I actually do this on the boiler, the only sensor that changes to reflect the setting is FlowTempDesired so I jumped to the conclusion that I just had to write to that. But maybe it's achievable by setting other entities. However, I can see from the config files that none of the entities with the "temp" attribute are writeable by default. I've not yet disposed of the adapter in temper so if you have any suggestions how I can change a setting that the customer is encouraged to adjust, then I would be very grateful |
Beta Was this translation helpful? Give feedback.
-
|
It possibly depends on your heating system setup - do you have an outside temperature sensor? If so, then the thing that controls the FlowTempDesired is the heat curve which calculates the desired flow temperature based on both the desired (room) temperature and the outside temperature. Old boilers may work more primitively than that of course. I believe an alternative approach is to manipulate SetModeOverride - I've not needed to do this but you can search for this in this forum but also the configuration files discussion forum. This might be a good place to start: john30/ebusd-configuration#242 This will involve you adding a new custom message 'SetModeOverride' that will allow you to control flow temp and others - I believe you need to send this frequently even if your desired values don't change otherwise the controller/boiler will reset to defaults after a number of minutes. Good luck! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the advice @JonesGW-MGD . No, I have a new heat only boiler with HA controlling the only input which is Heat Demand. HA takes care of when the boiler should heat according to room temperature sensors so it's just on or off. The boiler takes care of the modulation. Your idea of using SetModeOverride sounds promising. I will have to study the forum to determine the syntax to publish via MQTT but FlowTempDesired is certainly one of the many parameters |
Beta Was this translation helpful? Give feedback.
-
|
@JonesGW-MGD I can confirm that writing to SetModeOverride did just what I want, but the boiler reverts to panel settings after 15 minutes as you surmised. This is no problem and perfectly reasonable. If anyone else is wondering, I just had to publish a payload of 0;75;-;-;-;0;0;0;0;0;0;0 to mqtt topic ebusd/bai/SetModeOverride/set to set the DesiredFlowTemp to 75°. I found that with the 5th parameter set to 0, the modulation stuck at the minimum of 22% but it works properly with the fifth parameter set to - Thanks to everyone who helped with advice |
Beta Was this translation helpful? Give feedback.
-
|
I'm back with another issue. Everything is working fine. Got all setup and can write/read, poll etc. CSV Config for Brink Renovenet Sky 300/Excellent: MQTT ebusd I have tried to rename the entities name in the CSV, give it another data type, another type. It's always the same. P.S. this is a ventilation system, no HVAC/Heat Pump. |
Beta Was this translation helpful? Give feedback.
-
|
I think you need to modify |
Beta Was this translation helpful? Give feedback.
-
|
holly cow @Koky05, it worked! thanks man, appreciate it a lot. |
Beta Was this translation helpful? Give feedback.
-
|
Getting forward with my installation, thanks again for this nice framework. I My problem, auto discovery seams not to work for my configuration, there are only general the ebus device attributes: IN my mqtt explorer I can see more attributes. Don't know what I did wrong, any hints where to look / how to debug? BR, |
Beta Was this translation helpful? Give feedback.
-
|
Did you change filter and direction in |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for this quick reply. No, so far I didn't touch the config file. --- later --- |
Beta Was this translation helpful? Give feedback.
-
|
More effect will have filter-field. Direction just show and allow writable values, but it also depend on access-level. So in your case try to comment out filter-field by adding hash sign (#) at the beggining of the line. |
Beta Was this translation helpful? Give feedback.
-
|
Did also not work. In the ebusd log I see that the messages get published and I can receive them in my mqtt explorer. Is there any log file where I could see which messages are filtered and why no entities are created ? |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I got it working on my setup but I get the following :
how can I get a layout similar to a generic thermostat: My HA version is 2023.1.5 Thx in advance for your advice |
Beta Was this translation helpful? Give feedback.
-
|
You need to create it by yourself with using of existing sensors or MQTT path. But I prefer MQTT Thermostat because it also supports modes change MQTT HVAC |
Beta Was this translation helpful? Give feedback.
-
|
Thx for your swift reply. I tried the MQTT thermostat but I get following error when I check the config:
Any idea what's wrong? |
Beta Was this translation helpful? Give feedback.
-
|
Hi. Thx again for your reply. Unfortunately I get another error: Below my config: mqtt:
|
Beta Was this translation helpful? Give feedback.
-
|
I try to explain my cnfiguration. In configuration.yaml I have line I'll try to modify this configuration for you. So that's why so many errors you got. So I think I made mistake again and it should looks like: |
Beta Was this translation helpful? Give feedback.
-
|
Hi. I managed to make it work, except the part of the device which gives following error:
Thanks a lot. |
Beta Was this translation helpful? Give feedback.
-
|
I use couple of ebus devic integration. One is direct MQTT Climate and second is HA Autodiscovery. If you setup correctly device part it can join it into one and you can see all attributes in one device.
|
Beta Was this translation helpful? Give feedback.
-
|
OK. thanks again for your swift replies. Peter |
Beta Was this translation helpful? Give feedback.
-
|
Hij, yes
…On Jun 11, 2024, 19:19, at 19:19, Tgroon ***@***.***> wrote:
hi, did you solve this problem?
--
Reply to this email directly or view it on GitHub:
#518 (reply in thread)
You are receiving this because you commented.
Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I see that I should give the command But where do I give this command ? |
Beta Was this translation helpful? Give feedback.
-
|
You need to run eBus Daemon as stand alone application or as Docker Container or Home Assistant Addon. |
Beta Was this translation helpful? Give feedback.
-
|
got it working. The config of the home assistant add on looks to do the same |
Beta Was this translation helpful? Give feedback.
and others
-
I started using Home Assistant (aka "HA" or "hassio") a while ago and was pretty impressed by its features and huge number of integrations. So I wanted to have all the data grabbed from my heating to be available on my HA instance as well :-)
As the available data in ebusd is highly dependant on the actual circuits on the bus, this had to be done in a very dynamic fashion and luckily HA supports a feature called MQTT discovery. This allows any MQTT capable thing to announce semantics of the data sent though MQTT itself - really cool.
Support for this is now implemented in ebusd using a little template engine which is activated by using "--mqttint=/etc/ebusd/mqtt-hassio.cfg --mqttjson" as additional arguments to ebusd. See the details described here as well.
At the end, it looks like this in HA lovelace for one of the entities:
And the list of entities is huge - this is just the list of devices each one having a lot of entities in it:
All entities belong to logical devices within HA, here is an example one:
How is this activated? Simply by enabling MQTT for ebusd and making it use the integration configuration file, e.g. like this:
ebusd ... --mqtthost my-mqtt-host --mqttport 1883 --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqttjsonThat's it, the magic starts automatically when looking at HA later on.
Beta Was this translation helpful? Give feedback.
All reactions