Skip to content

Latest commit

 

History

History
26 lines (18 loc) · 1.02 KB

README.md

File metadata and controls

26 lines (18 loc) · 1.02 KB
Raw

Homelab Configurtation

This is an Ansible playbook (and related files) capable of provisioning as many of my computers (servers and clients) as is reasonable.

Usage

While Ansible is typically a "push" model where one commanding server uses SSH to configure other computers, it's most convenient for me to use a "pull" model where the client computers download the new configuration and run it themselves. This can be achieved by running:

sudo apt-get install ansible
ansible-pull -U https://github.com/jpitlor/homelab-configuration

Then, to make sure the client stays correctly configured in the future, set up a cron job. This command writes the cron config to a file in the cron.d folder to make sure any updates to the cron package don't overwrite this configuration.

echo "@daily jpitlor ansible-pull -U https://github.com/jpitlor/homelab-configuration" > /etc/cron.d/ansible

netsh interface portproxy add v4tov4 listenport=8081 listenaddress=0.0.0.0 connectport=8081 connectaddress=$(wsl hostname -I)