README.md

wdi5

Extension to Webdriver.IO for testing a hybrid, cordova-wrapped UI5 app on iOS, Android and Electron. Includes all capabilites of its’ lightweight sibling wdio-ui5-service for browser-scoped tests.

Table of Contents

• wdi5
  • Table of Contents
  • Prerequisites
  • Getting started
    • Installation
    • browser-scope
    • General (non-browser) setup
    • shared config file
    • iOS
    • Android
    • Electron
  • Usage
  • Features specific to wdi5 (vs. wdio-ui5-service)
    • Cordova plugins
  • FAQ/hints
  • License

Prerequisites

• UI5 app (built with cordova)
  • iOS: .ipa (device-type build) or .app (emulator-type build) + iOS simulator
  • Android: .apk + emulator
  • Electron: binary
• node version >= 12.x (lts/erbium)
• (optional) yarn during development, we rely on yarn’s workspace-features - that’s why we refer to yarn instead of npm in the docs, even though using npm as an equivalent shold be fine too

Getting started

Installation

Using wdi5 is essentially configuring wdio with wdi5-specific options on top. The recommended development approach is to first write and execute the tests in the browser-context, then run the tests on native devices/emulators or against the electron-app.

# install the node module
$> yarn add -D wdi5

# Generate a standard `wdio.conf.js` via the
# standard webdriver.io-tools:
$> npx wdio config # this will also install standard wdio-dependencies

browser-scope

Note that even though wdi5 includes the functionality of its’ lightweight sibling wdio-ui5-service (the Webdriver.IO-plugin) for browser-based testing, you don’t need to add ui5 to the services-section of wdio.conf.js - the browser-functionality is included when injecting wdi5 . For this, require 'wdi5/lib/service/wdi5.service' as shown below.

Enhance the wdio.conf.js-file with the recommended wdi5 settings:

const WDI5Service = require('wdi5/lib/service/wdi5.service'); // bridge to browser-scope

exports.config = {
    // ...
    baseUrl: "http://localhost:8080", // standard webdriver.io
    // wdi5-specific
    services: [
        'chromedriver',
        [WDI5Service]
    ]
    wdi5: {
        screenshotPath: "./test/report/screenshots", // [optional] using the project root
        screenshotsDisabled: false // [optional] {Boolean}; if set to true screenshots won't be taken and not written to file system
        logLevel: "verbose", // [optional] error | silent | verbose
        platform: "browser", // [mandatory] android | browser | electron | ios
        deviceType: "web" // [mandatory] native (ios, android) | web (browser, electron)
        path: '/some/native/device/path' // [optional] path to your android or ios webapp
        // if your ui5 app under test
        // is served by anything other than the ui5 tooling,
        // set this option explicity to false (defaults to true)
    }
    // ...
    services: [
		'chromedriver',
        [WDI5Service]
    ]
}

Then, start your local webserver (e.g. via $> soerver in the app directory),

and kick off your tests via $> npx wdio.

General (non-browser) setup

We like to always have all parts of the test-environment running in parallel:

• manually started simulator/emulator
• appium e.g. via yarn _startApp:ios (or chromedriver for electron)
• test execution, e.g. yarn _test:ios

You can combine all of the above by running yarn test:<platform> (e.g. yarn test:ios), catering towards a ci environment, at the cost of losing the flexibility of each tooling.

Also, it is recommended to split up the overall configuration in a shared- and a platform-specific part - this helps with overview and maintenance. See wdio-shared.conf.js and wdio-${platform}.conf.js in the top-level /test-folder as an example.

shared config file

Setup appium-specific and platform-independent configuration settings in a wdio-shared.conf.js :

const WDI5Service = require('wdi5')
exports.config = { // we export it as a module since this file is required in wdio-${platform}.conf.js
    // 4723 is the default port for Appium
    port: 4723,
	maxInstances: 1,
	// path to tests
    specs: [path.join('test', 'ui5-app', 'webapp', 'test', 'e2e', '*.js')],
    // tell wdio to use the wdi5 extenstion
    services: [
        [WDI5Service]
    ],
    waitforTimeout: 60000, // well...
    // syntax style for the test files
	framework: 'mocha',
    mochaOpts: {
        timeout: 90000 // well...
    },

    wdi5: {
        deviceType: 'native' // native | web
        screenshotPath: require('path').join('test', 'report', 'screenshots'),
        logLevel: 'verbose', // error | verbose | silent
        // platform: '...', // browser | android | ios | electron -> set in wdio-${platform}.conf.js
    }
}

iOS

First, make sure all prerequisites mentioned in http://appium.io/docs/en/drivers/ios-xcuitest/index.html for XCUITest-based testing are fullfilled.

Create an iOS-specific config file (e.g. wdi5-ios.conf.js). In there, require the shared config file and set platform-specific options:

const path = require('path');
let config = require('./wdio-shared.conf').config;
config.capabilities = [
  {
    automationName: 'XCUITest',
    platformName: 'iOS',

    // iOS version
    platformVersion: '14.0',

    // For iOS, this must exactly match the (simulator) device name as seen in Xcode.
    deviceName: 'iPhone 11',

    // Where to find the .apk or .ipa file to install on the device.
    // The exact location of the file may change depending on your cordova build!
    app: path.join('test', 'ui5-app', 'app', 'platforms', 'ios', 'build', 'emulator', 'UI5.app'),

    // by default, appium runs tests in the native context. By setting autoWebview to
    // true, it runs our tests in the Cordova context.
    autoWebview: true,

    // display simulator window
    isHeadless: false,

    // http://appium.io/docs/en/drivers/ios-xcuitest/#capabilities
    // https://appiumpro.com/editions/43-setting-ios-app-permissions-automatically
    // https://github.com/wix/AppleSimulatorUtils
    permissions: '{"jss.wdi5.sample": {"camera": "yes","notifications": "yes"}}'
  }
];

config.outputDir = path.join('test', 'report', 'logs');

// tell wdi5 we're running on iOS
config.wdi5.platform = 'ios';

exports.config = config;

Refer to the xcuitest-driver capabilities documentation for a complete list of possible settings for the capabilities-section!

Start appium with your desired switches/flags (we usually just start it "plain", aka $> appium).

Then run the tests with iOS-scope à la $> npx wdio wdio-ios.conf.js

Android

First, make sure all prerequisites mentioned in http://appium.io/docs/en/drivers/android-uiautomator2/ for UiAutomator2-based testing are installed and fullfilled.

Create an Android-specific config file (e.g. wdi5-android.conf.js). In there, require the shared config file and set platform-specific options:

const path = require('path');
let config = require('./wdio-shared.conf').config;
require('dotenv').config();

// This defines which kind of device we want to test on, as well as how it should be
// configured.
config.capabilities = [
  {
    automationName: 'UiAutomator2',

    platformName: 'Android',

    // The version of the Android system
    platformVersion: '11',

    // For Android, Appium uses the first device it finds using "adb devices". So, this string simply needs to be non-empty.
    deviceName: 'any',

    chromeOptions: {w3c: false},

    // Where to find the .apk or .ipa file to install on the device. The exact location
    // of the file may change depending on your Cordova version.
    app: path.join(
      'test',
      'ui5-app',
      'app',
      'platforms',
      'android',
      'app',
      'build',
      'outputs',
      'apk',
      'debug',
      'app-debug.apk'
    ),

    // By default, Appium runs tests in the native context. By setting autoWebview to
    // true, it runs our tests in the Cordova context.
    autoWebview: true,

    // When set to true, it will not show permission dialogs, but instead grant all
    // permissions automatically.
    autoGrantPermissions: true,

    isHeadless: false,

    // name this to the AVD emulator of your liking
    avd: 'Pixel_XL_API_30'
  }
];

config.wdi5.platform = 'android';

exports.config = config;

Start appium with your desired switches/flags (peak at our /test/wdio-android.conf.js).

Then run the tests with Android-scope à la $> npx wdio wdio-android.conf.js

Electron

First and foremost: make sure you’re using the version of chromedriver matching the one your electron app is built with.

As with iOS and Android with electron-specific settings, e.g. in wdio-electron.conf.js - note that for the electron-scope, we’re not reusing the shared config file:

const path = require('path');
const WDI5Service = require('wdi5/lib/service/wdi5.service'); // bridge to browser-scope

// https://github.com/electron-userland/spectron/issues/74
exports.config = {
  path: '/', // Path to chromedriver endpoint.
  host: 'localhost', // localhost == chromedriver
  port: 9515, // default chromedriver port
  services: [[WDI5Service]],
  chromeDriverLogs: path.join('test', 'report', 'logs'),
  maxInstances: 1, // multi-instance doesn't work (yet :) )
  reporters: ['spec'],
  outputDir: path.join('test', 'report', 'logs'),
  coloredLogs: true,
  framework: 'mocha',
  mochaOpts: {
    timeout: 60000
  },
  capabilities: [
    {
      isHeadless: false,
      browserName: 'chrome',
      'goog:chromeOptions': {
        w3c: false,
        binary: path.join(
          process.cwd(), // this is important
          'test',
          'ui5-app',
          'app',
          'platforms',
          'electron',
          'build',
          'mac',
          'UI5.app',
          'Contents',
          'MacOS',
          'UI5'
        ),
        args: ['remote-debugging-port=9222', 'window-size=1440,800']
      }
    }
  ],
  wdi5: {
    deviceType: 'web', // yep, not "native"
    screenshotPath: path.join('test', 'report', 'screenshots'),
    logLevel: 'verbose',
    platform: 'electron',
    plugins: {
      'phonegap-plugin-barcodescanner': {
        respObjElectron: {
          text: '123-123-asd',
          format: 'EAN',
          cancelled: ''
        },
        scanCode: '123-123-asd',
        format: 'EAN'
      }
    }
  }
};

To run the tests,

1. start your electron’s matching chromedriver (e.g. via $> npx chromedriver@85)
2. use the Webdriver.IO-CLI for test execution: $> npx wdio wdio-electron.conf.js

Usage

Run-(Test-)Time usage of wdi5 is agnostic to its' test-scope (browser or native) and centers around the global browser-object, be it in the browser or on a real mobile device.

Test runs are always started via the regular webdriver.io-cli:

$> npx wdio

Please see the top-level README for API-methods and usage instructions.

Features specific to wdi5 (vs. wdio-ui5-service)

Cordova plugins

This framework comes with a set of plugin mocks.

List of provided plugin mocks:

• phonegap-plugin-barcodescanner

To add a new cordova plugin mock, specify a plugins object in the wdi5 object of the config file. Name it exactly as the cordova plugin is named (e.g. "phonegap-plugin-barcodescanner") and use the path property to point to your mock implementation file.

Additionally, you can define custom properties for programmatic "responses" during test execution (here: mockedPluginResponse).

plugins: {
        'phonegap-plugin-barcodescanner': {
            path: "./to/mock/implementation.js",
            mockedPluginResponse: {
                text: '123123',
                format: 'EAN',
                cancelled: ''
            }
        },
        'other-cordova-plugin': {
            path: "./other/mock/implementation/path.js"
        }
    }

FAQ/hints

• performance: integration/e2e-tests are rarely fast. wdi5 tags along that line, remote-controlling a browser with code and all -> watch your timeouts and refer to the wdio-documentation on how to tweak them
• Android: make sure you have the environment variable JAVA_HOME set in both the shell you’re running Appium and in the shell you’re running the test(s) in.
• Electron: a known pitfall is the chromedriver version. Make sure you run the matching electron-chromedriver version to the electron version used to build the binary.
• Webdriver.IO's watch mode is running, but subsequent context.executeAsync()-calls fail - exact cause unknown, likely candidate is fibers from @wdio/sync
• In case ... bind() returned an error, errno=0: Address already in use (48) error shows up during test execution any chromedriver service is already running. You need to quit this process eg. by force quiting it in the activity monitor.

License

see top-level LICENSE file