From 3f63c939200f4de6185343fcf0f727426e8f3b40 Mon Sep 17 00:00:00 2001 From: Guido Aguiar Date: Mon, 6 May 2024 10:53:55 -0300 Subject: [PATCH 1/4] Add support for M5Cardputer --- User_Setup_Select.h | 1 + User_setup_marauder_m5cardputer.h | 328 ++++++++++++++++++++++++ esp32_marauder/CommandLine.cpp | 2 +- esp32_marauder/CommandLine.h | 7 +- esp32_marauder/Display.cpp | 7 +- esp32_marauder/Keyboard_def.h | 149 +++++++++++ esp32_marauder/MenuFunctions.cpp | 121 +++++++-- esp32_marauder/MenuFunctions.h | 30 ++- esp32_marauder/SDInterface.cpp | 21 +- esp32_marauder/SDInterface.h | 2 +- esp32_marauder/WiFiScan.cpp | 38 +-- esp32_marauder/WiFiScan.h | 4 +- esp32_marauder/configs.h | 222 +++++++++++++++- esp32_marauder/data/marauder240_135.jpg | Bin 0 -> 13722 bytes esp32_marauder/esp32_marauder.ino | 33 ++- esp32_marauder/keyboard.cpp | 255 ++++++++++++++++++ esp32_marauder/keyboard.h | 192 ++++++++++++++ 17 files changed, 1325 insertions(+), 87 deletions(-) create mode 100644 User_setup_marauder_m5cardputer.h create mode 100644 esp32_marauder/Keyboard_def.h create mode 100644 esp32_marauder/data/marauder240_135.jpg create mode 100644 esp32_marauder/keyboard.cpp create mode 100644 esp32_marauder/keyboard.h diff --git a/User_Setup_Select.h b/User_Setup_Select.h index 82c61d38a..971cda241 100644 --- a/User_Setup_Select.h +++ b/User_Setup_Select.h @@ -24,6 +24,7 @@ #include //#include //#include +//#include //#include //#include // Setup file configured for my ILI9341 diff --git a/User_setup_marauder_m5cardputer.h b/User_setup_marauder_m5cardputer.h new file mode 100644 index 000000000..b92ea69cd --- /dev/null +++ b/User_setup_marauder_m5cardputer.h @@ -0,0 +1,328 @@ +// USER DEFINED SETTINGS +// Set driver type, fonts to be loaded, pins used and SPI control method etc +// +// See the User_Setup_Select.h file if you wish to be able to define multiple +// setups and then easily select which setup file is used by the compiler. +// +// If this file is edited correctly then all the library example sketches should +// run without the need to make any more changes for a particular hardware setup! +// Note that some sketches are designed for a particular TFT pixel width/height + + +// ################################################################################## +// +// Section 1. Call up the right driver file and any options for it +// +// ################################################################################## + +// Display type - only define if RPi display +//#define RPI_DRIVER + +#define CGRAM_OFFSET + +// Only define one driver, the other ones must be commented out +//#define ILI9341_DRIVER // OG Marauder +//#define ST7735_DRIVER // Marauder Mini // Define additional parameters below for this display +//#define ILI9163_DRIVER // Define additional parameters below for this display +//#define S6D02A1_DRIVER +//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI +//#define HX8357D_DRIVER +//#define ILI9481_DRIVER +//#define ILI9486_DRIVER +//#define ILI9488_DRIVER // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high) +//#define ST7789_DRIVER // Full configuration option, define additional parameters below for this display +#define ST7789_2_DRIVER // Minimal configuration option, define additional parameters below for this display +//#define R61581_DRIVER +//#define RM68140_DRIVER +//#define ST7796_DRIVER + +// Some displays support SPI reads via the MISO pin, other displays have a single +// bi-directional SDA pin and the library will try to read this via the MOSI line. +// To use the SDA line for reading data from the TFT uncomment the following line: + +// #define TFT_SDA_READ // This option is for ESP32 ONLY, tested with ST7789 display only + +// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display +// Try ONE option at a time to find the correct colour order for your display + + #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue +// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red + +// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below + +// #define M5STACK + +// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation +// #define TFT_WIDTH 80 + #define TFT_WIDTH 135 // Marauder Mini +// #define TFT_WIDTH 240 // ST7789 240 x 240 and 240 x 320 +// #define TFT_HEIGHT 160 + #define TFT_HEIGHT 240 // Marauder Mini +// #define TFT_HEIGHT 240 // ST7789 240 x 240 +// #define TFT_HEIGHT 320 // ST7789 240 x 320 + +// For ST7735 ONLY, define the type of display, originally this was based on the +// colour of the tab on the screen protector film but this is not always true, so try +// out the different options below if the screen does not display graphics correctly, +// e.g. colours wrong, mirror images, or tray pixels at the edges. +// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this +// this User_Setup file, then rebuild and upload the sketch to the board again: + +// #define ST7735_INITB +// #define ST7735_GREENTAB +// #define ST7735_GREENTAB2 +// #define ST7735_GREENTAB3 +// #define ST7735_GREENTAB128 // For 128 x 128 display +// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset) +// #define ST7735_REDTAB +// #define ST7735_BLACKTAB +// #define ST7735_REDTAB160x80 // For 160 x 80 display with 24 pixel offset + +// If colours are inverted (white shows as black) then uncomment one of the next +// 2 lines try both options, one of the options should correct the inversion. + +// #define TFT_INVERSION_ON +// #define TFT_INVERSION_OFF + +// If a backlight control signal is available then define the TFT_BL pin in Section 2 +// below. The backlight will be turned ON when tft.begin() is called, but the library +// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be +// driven with a PWM signal or turned OFF/ON then this must be handled by the user +// sketch. e.g. with digitalWrite(TFT_BL, LOW); + + #define TFT_BACKLIGHT_ON HIGH // HIGH or LOW are options + +// ################################################################################## +// +// Section 2. Define the pins that are used to interface with the display here +// +// ################################################################################## + +// We must use hardware SPI, a minimum of 3 GPIO pins is needed. +// Typical setup for ESP8266 NodeMCU ESP-12 is : +// +// Display SDO/MISO to NodeMCU pin D6 (or leave disconnected if not reading TFT) +// Display LED to NodeMCU pin VIN (or 5V, see below) +// Display SCK to NodeMCU pin D5 +// Display SDI/MOSI to NodeMCU pin D7 +// Display DC (RS/AO)to NodeMCU pin D3 +// Display RESET to NodeMCU pin D4 (or RST, see below) +// Display CS to NodeMCU pin D8 (or GND, see below) +// Display GND to NodeMCU pin GND (0V) +// Display VCC to NodeMCU 5V or 3.3V +// +// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin +// +// The DC (Data Command) pin may be labeled AO or RS (Register Select) +// +// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more +// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS +// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin +// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected. +// +// The NodeMCU D0 pin can be used for RST +// +// +// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin +// If 5V is not available at a pin you can use 3.3V but backlight brightness +// will be lower. + + +// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ###### + +// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation +//#define TFT_CS PIN_D8 // Chip select control pin D8 +//#define TFT_DC PIN_D3 // Data Command control pin +//#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line) +//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V + +//#define TFT_BL PIN_D1 // LED back-light (only for ST7789 with backlight control pin) + +//#define TOUCH_CS PIN_D2 // Chip select pin (T_CS) of touch screen + +//#define TFT_WR PIN_D2 // Write strobe for modified Raspberry Pi TFT only + + +// ###### FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES ###### + +// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact +// but saves pins for other functions. It is best not to connect MISO as some displays +// do not tristate that line wjen chip select is high! +// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode +// On NodeMCU V3 S0 =MISO, S1 =MOSI, S2 =SCLK +// In ESP8266 overlap mode the following must be defined + +//#define TFT_SPI_OVERLAP + +// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3 +//#define TFT_CS PIN_D3 +//#define TFT_DC PIN_D5 // Data Command control pin +//#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line) +//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V + + +// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP ###### + +// For ESP32 Dev board (only tested with ILI9341 display) +// The hardware SPI can be mapped to any pins + +// M5 Cardputer +#define TFT_BL 38 +#define TFT_RST 33 // Reset pin (could connect to NodeMCU RST, see next line) +#define TFT_DC 34 // Data Command control pin +#define TFT_MOSI 35 +#define TFT_SCLK 36 +#define TFT_CS 37 // Chip select control pin D8 +#define TOUCH_CS -1 +// #define TFT_MISO -1 + +// Display SDO/MISO to NodeMCU pin D6 (or leave disconnected if not reading TFT) +// Display LED to NodeMCU pin VIN (or 5V, see below) +// Display SCK to NodeMCU pin D5 +// Display SDI/MOSI to NodeMCU pin D7 +// Display DC (RS/AO)to NodeMCU pin D3 +// Display RESET to NodeMCU pin D4 (or RST, see below) +// Display CS to NodeMCU pin D8 (or GND, see below) +// Display GND to NodeMCU pin GND (0V) +// Display VCC to NodeMCU 5V or 3.3V + +/* +// ESP32 Marauder +#define TFT_MISO 19 +#define TFT_MOSI 23 +#define TFT_SCLK 18 +#define TFT_CS 17 // Chip select control pin +#define TFT_DC 16 // Data Command control pin +#define TFT_RST 5 // Reset pin (could connect to RST pin) +//#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST + +#define TFT_BL 32 // LED back-light (only for ST7789 with backlight control pin) + +#define TOUCH_CS 21 // Chip select pin (T_CS) of touch screen +*/ +///////////////////////////// + +// ESP32 Centauri +/* +#define TFT_MISO 19 +#define TFT_MOSI 23 +#define TFT_SCLK 18 +#define TFT_CS 27 // Chip select control pin +#define TFT_DC 26 // Data Command control pin +#define TFT_RST 5 // Reset pin (could connect to RST pin) +//#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST + +#define TFT_BL 32 // LED back-light (only for ST7789 with backlight control pin) + +#define TOUCH_CS 21 // Chip select pin (T_CS) of touch screen +*/ +///////////////////////////// + +//#define TFT_WR 22 // Write strobe for modified Raspberry Pi TFT only + +// For the M5Stack module use these #define lines +//#define TFT_MISO 19 +//#define TFT_MOSI 23 +//#define TFT_SCLK 18 +//#define TFT_CS 14 // Chip select control pin +//#define TFT_DC 27 // Data Command control pin +//#define TFT_RST 33 // Reset pin (could connect to Arduino RESET pin) +//#define TFT_BL 32 // LED back-light (required for M5Stack) + +// ###### EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP ###### + +// The library supports 8 bit parallel TFTs with the ESP32, the pin +// selection below is compatible with ESP32 boards in UNO format. +// Wemos D32 boards need to be modified, see diagram in Tools folder. +// Only ILI9481 and ILI9341 based displays have been tested! + +// Parallel bus is only supported on ESP32 +// Uncomment line below to use ESP32 Parallel interface instead of SPI + +//#define ESP32_PARALLEL + +// The ESP32 and TFT the pins used for testing are: +//#define TFT_CS 33 // Chip select control pin (library pulls permanently low +//#define TFT_DC 15 // Data Command control pin - must use a pin in the range 0-31 +//#define TFT_RST 32 // Reset pin, toggles on startup + +//#define TFT_WR 4 // Write strobe control pin - must use a pin in the range 0-31 +//#define TFT_RD 2 // Read strobe control pin + +//#define TFT_D0 12 // Must use pins in the range 0-31 for the data bus +//#define TFT_D1 13 // so a single register write sets/clears all bits. +//#define TFT_D2 26 // Pins can be randomly assigned, this does not affect +//#define TFT_D3 25 // TFT screen update performance. +//#define TFT_D4 17 +//#define TFT_D5 16 +//#define TFT_D6 27 +//#define TFT_D7 14 + + +// ################################################################################## +// +// Section 3. Define the fonts that are to be used here +// +// ################################################################################## + +// Comment out the #defines below with // to stop that font being loaded +// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not +// normally necessary. If all fonts are loaded the extra FLASH space required is +// about 17Kbytes. To save FLASH space only enable the fonts you need! + +#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH +#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters +#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters +#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm +#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-. +#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. +//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT +#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts + +// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded +// this will save ~20kbytes of FLASH +#define SMOOTH_FONT + + +// ################################################################################## +// +// Section 4. Other options +// +// ################################################################################## + +// Define the SPI clock frequency, this affects the graphics rendering speed. Too +// fast and the TFT driver will not keep up and display corruption appears. +// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails +// With a ST7735 display more than 27MHz may not work (spurious pixels and lines) +// With an ILI9163 display 27 MHz works OK. + +// #define SPI_FREQUENCY 1000000 +//#define SPI_FREQUENCY 5000000 +// #define SPI_FREQUENCY 10000000 + #define SPI_FREQUENCY 20000000 +//#define SPI_FREQUENCY 27000000 // Marauder // Actually sets it to 26.67MHz = 80/3 +// #define SPI_FREQUENCY 40000000 +// #define SPI_FREQUENCY 80000000 + +// Optional reduced SPI frequency for reading TFT +#define SPI_READ_FREQUENCY 20000000 + +// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here: +#define SPI_TOUCH_FREQUENCY 2500000 + +// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default. +// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam) +// then uncomment the following line: +//#define USE_HSPI_PORT + +// Comment out the following #define if "SPI Transactions" do not need to be +// supported. When commented out the code size will be smaller and sketches will +// run slightly faster, so leave it commented out unless you need it! + +// Transaction support is needed to work with SD library but not needed with TFT_SdFat +// Transaction support is required if other SPI devices are connected. + +// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex) +// so changing it here has no effect + +// #define SUPPORT_TRANSACTIONS \ No newline at end of file diff --git a/esp32_marauder/CommandLine.cpp b/esp32_marauder/CommandLine.cpp index 74355e5d8..ca976bcf2 100644 --- a/esp32_marauder/CommandLine.cpp +++ b/esp32_marauder/CommandLine.cpp @@ -388,7 +388,7 @@ void CommandLine::runCommand(String input) { else if (cmd_args.get(0) == LED_CMD) { int hex_arg = this->argSearch(&cmd_args, "-s"); int pat_arg = this->argSearch(&cmd_args, "-p"); - #ifdef PIN + #if defined(PIN) && defined(HAS_NEOPIXEL_LED) if (hex_arg != -1) { String hexstring = cmd_args.get(hex_arg + 1); int number = (int)strtol(&hexstring[1], NULL, 16); diff --git a/esp32_marauder/CommandLine.h b/esp32_marauder/CommandLine.h index c6be7e0fe..660db8a43 100644 --- a/esp32_marauder/CommandLine.h +++ b/esp32_marauder/CommandLine.h @@ -16,7 +16,11 @@ #include "SDInterface.h" #endif #include "settings.h" -#include "LedInterface.h" + +#ifdef HAS_NEOPIXEL_LED + #include "LedInterface.h" + extern LedInterface led_obj; +#endif #ifdef HAS_SCREEN extern MenuFunctions menu_function_obj; @@ -29,7 +33,6 @@ extern WiFiScan wifi_scan_obj; extern SDInterface sd_obj; #endif extern Settings settings_obj; -extern LedInterface led_obj; extern LinkedList* access_points; extern LinkedList* ssids; extern LinkedList* stations; diff --git a/esp32_marauder/Display.cpp b/esp32_marauder/Display.cpp index f150e5c29..7d27c9dd0 100644 --- a/esp32_marauder/Display.cpp +++ b/esp32_marauder/Display.cpp @@ -20,12 +20,11 @@ void Display::RunSetup() #endif tft.init(); - #ifndef MARAUDER_M5STICKC - tft.setRotation(0); // Portrait - #endif - #ifdef MARAUDER_M5STICKC + #if defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) tft.setRotation(1); + #else + tft.setRotation(0); // Portrait #endif #ifdef MARAUDER_REV_FEATHER diff --git a/esp32_marauder/Keyboard_def.h b/esp32_marauder/Keyboard_def.h new file mode 100644 index 000000000..82587998f --- /dev/null +++ b/esp32_marauder/Keyboard_def.h @@ -0,0 +1,149 @@ +#ifndef M5CARDPUTER_KB_KEYS_DEF_H +#define M5CARDPUTER_KB_KEYS_DEF_H + +#define SHIFT 0x80 + +#define KEY_LEFT_CTRL 0x80 +#define KEY_LEFT_SHIFT 0x81 +#define KEY_LEFT_ALT 0x82 + +#define KEY_FN 0xff +#define KEY_OPT 0x00 + +#define KEY_BACKSPACE 0x2a +#define KEY_TAB 0x2b +#define KEY_ENTER 0x28 + +const uint8_t _kb_asciimap[128] = { + 0x00, // NUL + 0x00, // SOH + 0x00, // STX + 0x00, // ETX + 0x00, // EOT + 0x00, // ENQ + 0x00, // ACK + 0x00, // BEL + KEY_BACKSPACE, // BS Backspace + KEY_TAB, // TAB Tab + KEY_ENTER, // LF Enter + 0x00, // VT + 0x00, // FF + 0x00, // CR + 0x00, // SO + 0x00, // SI + 0x00, // DEL + 0x00, // DC1 + 0x00, // DC2 + 0x00, // DC3 + 0x00, // DC4 + 0x00, // NAK + 0x00, // SYN + 0x00, // ETB + 0x00, // CAN + 0x00, // EM + 0x00, // SUB + 0x00, // ESC + 0x00, // FS + 0x00, // GS + 0x00, // RS + 0x00, // US + + 0x2c, // ' ' + 0x1e | SHIFT, // ! + 0x34 | SHIFT, // " + 0x20 | SHIFT, // # + 0x21 | SHIFT, // $ + 0x22 | SHIFT, // % + 0x24 | SHIFT, // & + 0x34, // ' + 0x26 | SHIFT, // ( + 0x27 | SHIFT, // ) + 0x25 | SHIFT, // * + 0x2e | SHIFT, // + + 0x36, // , + 0x2d, // - + 0x37, // . + 0x38, // / + 0x27, // 0 + 0x1e, // 1 + 0x1f, // 2 + 0x20, // 3 + 0x21, // 4 + 0x22, // 5 + 0x23, // 6 + 0x24, // 7 + 0x25, // 8 + 0x26, // 9 + 0x33 | SHIFT, // : + 0x33, // ; + 0x36 | SHIFT, // < + 0x2e, // = + 0x37 | SHIFT, // > + 0x38 | SHIFT, // ? + 0x1f | SHIFT, // @ + 0x04 | SHIFT, // A + 0x05 | SHIFT, // B + 0x06 | SHIFT, // C + 0x07 | SHIFT, // D + 0x08 | SHIFT, // E + 0x09 | SHIFT, // F + 0x0a | SHIFT, // G + 0x0b | SHIFT, // H + 0x0c | SHIFT, // I + 0x0d | SHIFT, // J + 0x0e | SHIFT, // K + 0x0f | SHIFT, // L + 0x10 | SHIFT, // M + 0x11 | SHIFT, // N + 0x12 | SHIFT, // O + 0x13 | SHIFT, // P + 0x14 | SHIFT, // Q + 0x15 | SHIFT, // R + 0x16 | SHIFT, // S + 0x17 | SHIFT, // T + 0x18 | SHIFT, // U + 0x19 | SHIFT, // V + 0x1a | SHIFT, // W + 0x1b | SHIFT, // X + 0x1c | SHIFT, // Y + 0x1d | SHIFT, // Z + 0x2f, // [ + 0x31, // bslash + 0x30, // ] + 0x23 | SHIFT, // ^ + 0x2d | SHIFT, // _ + 0x35, // ` + 0x04, // a + 0x05, // b + 0x06, // c + 0x07, // d + 0x08, // e + 0x09, // f + 0x0a, // g + 0x0b, // h + 0x0c, // i + 0x0d, // j + 0x0e, // k + 0x0f, // l + 0x10, // m + 0x11, // n + 0x12, // o + 0x13, // p + 0x14, // q + 0x15, // r + 0x16, // s + 0x17, // t + 0x18, // u + 0x19, // v + 0x1a, // w + 0x1b, // x + 0x1c, // y + 0x1d, // z + 0x2f | SHIFT, // { + 0x31 | SHIFT, // | + 0x30 | SHIFT, // } + 0x35 | SHIFT, // ~ + 0 // DEL +}; + +#endif \ No newline at end of file diff --git a/esp32_marauder/MenuFunctions.cpp b/esp32_marauder/MenuFunctions.cpp index ae49925ce..010b70377 100644 --- a/esp32_marauder/MenuFunctions.cpp +++ b/esp32_marauder/MenuFunctions.cpp @@ -476,14 +476,18 @@ MenuFunctions::MenuFunctions() void MenuFunctions::buttonNotSelected(uint8_t b, int8_t x) { if (x == -1) x = b; + #ifndef MARAUDER_M5CARDPUTER display_obj.tft.setFreeFont(NULL); + #endif display_obj.key[b].drawButton(false, current_menu->list->get(x).name); } void MenuFunctions::buttonSelected(uint8_t b, int8_t x) { if (x == -1) x = b; + #ifndef MARAUDER_M5CARDPUTER display_obj.tft.setFreeFont(NULL); + #endif display_obj.key[b].drawButton(true, current_menu->list->get(x).name); } @@ -611,7 +615,7 @@ void MenuFunctions::main(uint32_t currentTime) #endif #ifdef HAS_BUTTONS - + #if (C_BTN >= 0) bool c_btn_press = c_btn.justPressed(); #ifndef HAS_ILI9341 @@ -743,10 +747,14 @@ void MenuFunctions::main(uint32_t currentTime) y = -1; #endif - #ifdef HAS_BUTTONS +#ifdef HAS_BUTTONS #if !(defined(MARAUDER_V6) || defined(MARAUDER_V6_1)) - #ifndef MARAUDER_M5STICKC + #if (U_BTN >= 0 || defined(MARAUDER_M5CARDPUTER)) + #if (U_BTN >= 0) if (u_btn.justPressed()){ + #elif defined(MARAUDER_M5CARDPUTER) + if (this->isKeyPressed(';')){ + #endif if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF) || (wifi_scan_obj.currentScanMode == OTA_UPDATE)) { if (current_menu->selected > 0) { @@ -781,7 +789,13 @@ void MenuFunctions::main(uint32_t currentTime) } } #endif + + #if (D_BTN >= 0 || defined(MARAUDER_M5CARDPUTER)) + #if (D_BTN >= 0) if (d_btn.justPressed()){ + #elif defined(MARAUDER_M5CARDPUTER) + if (this->isKeyPressed('.')){ + #endif if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF) || (wifi_scan_obj.currentScanMode == OTA_UPDATE)) { if (current_menu->selected < current_menu->list->size() - 1) { @@ -815,9 +829,13 @@ void MenuFunctions::main(uint32_t currentTime) wifi_scan_obj.changeChannel(14); } } + #endif + + #if (C_BTN >= 0) if(c_btn_press){ current_menu->list->get(current_menu->selected).callable(); } + #endif #endif #endif } @@ -982,8 +1000,8 @@ void MenuFunctions::updateStatusBar() display_obj.tft.drawString("CH: " + (String)wifi_scan_obj.set_channel, 50, 0, 2); #endif - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - display_obj.tft.drawString("CH: " + (String)wifi_scan_obj.set_channel, TFT_WIDTH/4, 0, 1); + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + display_obj.tft.drawString("CH: " + (String)wifi_scan_obj.set_channel, TFT_WIDTH/4, 0, 1); #endif } @@ -996,8 +1014,8 @@ void MenuFunctions::updateStatusBar() display_obj.tft.drawString((String)wifi_scan_obj.free_ram + "B", 100, 0, 2); #endif - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - display_obj.tft.drawString((String)wifi_scan_obj.free_ram + "B", TFT_WIDTH/1.75, 0, 1); + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + display_obj.tft.drawString((String)wifi_scan_obj.free_ram + "B", TFT_WIDTH/1.75, 0, 1); #endif } @@ -1039,8 +1057,8 @@ void MenuFunctions::updateStatusBar() #endif #endif - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - display_obj.tft.setTextColor(the_color, STATUSBAR_COLOR); + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + display_obj.tft.setTextColor(the_color, STATUSBAR_COLOR); display_obj.tft.drawString("SD", TFT_WIDTH - 12, 0, 1); #endif } @@ -1048,8 +1066,8 @@ void MenuFunctions::updateStatusBar() void MenuFunctions::drawStatusBar() { display_obj.tft.setTextSize(1); - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - display_obj.tft.setFreeFont(NULL); + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + display_obj.tft.setFreeFont(NULL); #endif display_obj.tft.fillRect(0, 0, 240, STATUS_BAR_WIDTH, STATUSBAR_COLOR); display_obj.tft.setTextColor(TFT_WHITE, STATUSBAR_COLOR); @@ -1093,8 +1111,8 @@ void MenuFunctions::drawStatusBar() display_obj.tft.drawString("CH: " + (String)wifi_scan_obj.set_channel, 50, 0, 2); #endif - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - display_obj.tft.drawString("CH: " + (String)wifi_scan_obj.set_channel, TFT_WIDTH/4, 0, 1); + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + display_obj.tft.drawString("CH: " + (String)wifi_scan_obj.set_channel, TFT_WIDTH/4, 0, 1); #endif // RAM Stuff @@ -1105,8 +1123,8 @@ void MenuFunctions::drawStatusBar() display_obj.tft.drawString((String)wifi_scan_obj.free_ram + "B", 100, 0, 2); #endif - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - display_obj.tft.drawString((String)wifi_scan_obj.free_ram + "B", TFT_WIDTH/1.75, 0, 1); + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + display_obj.tft.drawString((String)wifi_scan_obj.free_ram + "B", TFT_WIDTH/1.75, 0, 1); #endif @@ -1147,8 +1165,8 @@ void MenuFunctions::drawStatusBar() #endif #endif - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - display_obj.tft.setTextColor(the_color, STATUSBAR_COLOR); + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + display_obj.tft.setTextColor(the_color, STATUSBAR_COLOR); display_obj.tft.drawString("SD", TFT_WIDTH - 12, 0, 1); #endif } @@ -1197,7 +1215,11 @@ void MenuFunctions::displaySetting(String key, Menu* menu, int index) { MenuNode node = menu->list->get(index); display_obj.tft.setTextWrap(false); + + #ifndef MARAUDER_M5CARDPUTER display_obj.tft.setFreeFont(NULL); + #endif + display_obj.tft.setCursor(0, 100); display_obj.tft.setTextSize(1); @@ -1229,6 +1251,10 @@ void MenuFunctions::RunSetup() this->initLVGL(); #endif + #ifdef MARAUDER_M5CARDPUTER + M5CardputerKeyboard.begin(); + #endif + // root menu stuff mainMenu.list = new LinkedList(); // Get list in first menu ready @@ -1551,7 +1577,12 @@ void MenuFunctions::RunSetup() #if (defined(HAS_BUTTONS) && defined(HAS_SD)) #if !(defined(MARAUDER_V6) || defined(MARAUDER_V6_1)) while(true) { - if (d_btn.justPressed()) { + #if (D_BTN >= 0 || defined(MARAUDER_M5CARDPUTER)) + #if (D_BTN >= 0) + if (d_btn.justPressed()){ + #elif defined(MARAUDER_M5CARDPUTER) + if (this->isKeyPressed('.')){ + #endif if (evil_portal_obj.selected_html_index > 0) evil_portal_obj.selected_html_index--; else @@ -1561,8 +1592,14 @@ void MenuFunctions::RunSetup() this->buildButtons(&htmlMenu); this->displayCurrentMenu(); } - #ifndef MARAUDER_M5STICKC - if (u_btn.justPressed()) { + #endif + + #if (U_BTN >= 0 || defined(MARAUDER_M5CARDPUTER)) + #if (U_BTN >= 0) + if (u_btn.justPressed()){ + #elif defined(MARAUDER_M5CARDPUTER) + if (this->isKeyPressed(';')){ + #endif if (evil_portal_obj.selected_html_index < evil_portal_obj.html_files->size() - 1) evil_portal_obj.selected_html_index++; else @@ -1573,6 +1610,8 @@ void MenuFunctions::RunSetup() this->displayCurrentMenu(); } #endif + + #if (C_BTN >= 0) if (c_btn.justPressed()) { if (evil_portal_obj.html_files->get(evil_portal_obj.selected_html_index) != "Back") { evil_portal_obj.target_html_name = evil_portal_obj.html_files->get(evil_portal_obj.selected_html_index); @@ -1582,6 +1621,7 @@ void MenuFunctions::RunSetup() this->changeMenu(htmlMenu.parentMenu); break; } + #endif } #endif #endif @@ -1827,8 +1867,12 @@ void MenuFunctions::RunSetup() // Start button loop while(true) { - #ifndef MARAUDER_M5STICKC - if (u_btn.justPressed()) { + #if (U_BTN >= 0 || defined(MARAUDER_M5CARDPUTER)) + #if (U_BTN >= 0) + if (u_btn.justPressed()){ + #elif defined(MARAUDER_M5CARDPUTER) + if (this->isKeyPressed(';')){ + #endif if (sd_file_index > 0) sd_file_index--; else @@ -1839,7 +1883,12 @@ void MenuFunctions::RunSetup() this->displayCurrentMenu(); } #endif - if (d_btn.justPressed()) { + #if (D_BTN >= 0 || defined(MARAUDER_M5CARDPUTER)) + #if (D_BTN >= 0) + if (d_btn.justPressed()){ + #elif defined(MARAUDER_M5CARDPUTER) + if (this->isKeyPressed('.')){ + #endif if (sd_file_index < sd_obj.sd_files->size() - 1) sd_file_index++; else @@ -1849,6 +1898,9 @@ void MenuFunctions::RunSetup() this->buildButtons(&sdDeleteMenu, 0, sd_obj.sd_files->get(sd_file_index)); this->displayCurrentMenu(); } + #endif + + #if (C_BTN >= 0) if (c_btn.justPressed()) { if (sd_obj.sd_files->get(sd_file_index) != "Back") { if (sd_obj.removeFile("/" + sd_obj.sd_files->get(sd_file_index))) @@ -2246,6 +2298,8 @@ void MenuFunctions::displayCurrentMenu(uint8_t start_index) #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) display_obj.tft.setFreeFont(NULL); display_obj.tft.setTextSize(1); + #elif defined(MARAUDER_M5CARDPUTER) + display_obj.tft.setTextSize(1); #endif for (uint8_t i = start_index; i < current_menu->list->size(); i++) { @@ -2266,15 +2320,32 @@ void MenuFunctions::displayCurrentMenu(uint8_t start_index) #endif - #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_REV_FEATHER) - if ((current_menu->selected == i) || (current_menu->list->get(i).selected)) + #if defined(MARAUDER_MINI) || defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) || defined(MARAUDER_REV_FEATHER) + if ((current_menu->selected == i) || (current_menu->list->get(i).selected)) display_obj.key[i - start_index].drawButton(true, current_menu->list->get(i).name); else display_obj.key[i - start_index].drawButton(false, current_menu->list->get(i).name); #endif } + #ifndef MARAUDER_M5CARDPUTER display_obj.tft.setFreeFont(NULL); + #endif } } +#ifdef MARAUDER_M5CARDPUTER +bool MenuFunctions::isKeyPressed(char c) +{ + M5CardputerKeyboard.updateKeyList(); + M5CardputerKeyboard.updateKeysState(); + bool pressed = M5CardputerKeyboard.isKeyPressed(c); + + if (pressed) + delay(200); + + return pressed; +} +#endif + +#endif #endif diff --git a/esp32_marauder/MenuFunctions.h b/esp32_marauder/MenuFunctions.h index 0f225d929..850c403e3 100644 --- a/esp32_marauder/MenuFunctions.h +++ b/esp32_marauder/MenuFunctions.h @@ -5,6 +5,10 @@ #include "configs.h" +#ifdef MARAUDER_M5CARDPUTER +#include "Keyboard.h" +#endif + #ifdef HAS_SCREEN #define BATTERY_ANALOG_ON 0 @@ -16,11 +20,22 @@ #ifdef HAS_BUTTONS #include "Switches.h" - extern Switches u_btn; - extern Switches d_btn; - extern Switches l_btn; - extern Switches r_btn; - extern Switches c_btn; + + #if (U_BTN >= 0) + extern Switches u_btn; + #endif + #if (D_BTN >= 0) + extern Switches d_btn; + #endif + #if (L_BTN >= 0) + extern Switches l_btn; + #endif + #if (R_BTN >= 0) + extern Switches r_btn; + #endif + #if (C_BTN >= 0) + extern Switches c_btn; + #endif #endif extern WiFiScan wifi_scan_obj; @@ -182,6 +197,11 @@ class MenuFunctions uint8_t updateTouch(uint16_t *x, uint16_t *y, uint16_t threshold = 600); + #ifdef MARAUDER_M5CARDPUTER + Keyboard_Class M5CardputerKeyboard = Keyboard_Class(); + bool isKeyPressed(char c); + #endif + public: MenuFunctions(); diff --git a/esp32_marauder/SDInterface.cpp b/esp32_marauder/SDInterface.cpp index c5a769eb0..27a048f57 100644 --- a/esp32_marauder/SDInterface.cpp +++ b/esp32_marauder/SDInterface.cpp @@ -21,23 +21,18 @@ bool SDInterface::initSD() { pinMode(SD_CS, OUTPUT); delay(10); - #if defined(MARAUDER_M5STICKC) - /* Set up SPI SD Card using external pin header - StickCPlus Header - SPI SD Card Reader - 3v3 - 3v3 - GND - GND - G0 - CLK - G36/G25 - MISO - G26 - MOSI - - CS (jumper to SD Card GND Pin) - */ - enum { SPI_SCK = 0, SPI_MISO = 36, SPI_MOSI = 26 }; + #if defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) + #ifdef MARAUDER_M5STICKC this->spiExt = new SPIClass(); - this->spiExt->begin(SPI_SCK, SPI_MISO, SPI_MOSI, SD_CS); - if (!SD.begin(SD_CS, *(this->spiExt))) { + #else + this->spiExt = new SPIClass(FSPI); + #endif + spiExt->begin(SD_SCK, SD_MISO, SD_MOSI, SD_CS); + if (!SD.begin(SD_CS, *(this->spiExt))) { #else if (!SD.begin(SD_CS)) { #endif + Serial.println(F("Failed to mount SD Card")); this->supported = false; return false; diff --git a/esp32_marauder/SDInterface.h b/esp32_marauder/SDInterface.h index eda62bafc..2e154914a 100644 --- a/esp32_marauder/SDInterface.h +++ b/esp32_marauder/SDInterface.h @@ -26,7 +26,7 @@ extern Settings settings_obj; class SDInterface { private: -#if defined(MARAUDER_M5STICKC) +#if defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) SPIClass *spiExt; #endif bool checkDetectPin(); diff --git a/esp32_marauder/WiFiScan.cpp b/esp32_marauder/WiFiScan.cpp index b19320ebb..ef29d6b58 100644 --- a/esp32_marauder/WiFiScan.cpp +++ b/esp32_marauder/WiFiScan.cpp @@ -649,7 +649,7 @@ void WiFiScan::startWiFiAttacks(uint8_t scan_mode, uint16_t color, String title_ xiao_led.attackLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.attackLED(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.setMode(MODE_ATTACK); #endif initTime = millis(); @@ -674,8 +674,8 @@ bool WiFiScan::shutdownWiFi() { xiao_led.offLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.offLED(); - #else - led_obj.setMode(MODE_OFF); + #elif defined(HAS_NEOPIXEL_LED) + led_obj.setMode(MODE_OFF); #endif this->wifi_initialized = false; @@ -701,8 +701,8 @@ bool WiFiScan::shutdownBLE() { xiao_led.offLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.offLED(); - #else - led_obj.setMode(MODE_OFF); + #elif defined(HAS_NEOPIXEL_LED) + led_obj.setMode(MODE_OFF); #endif this->ble_initialized = false; @@ -1144,8 +1144,8 @@ void WiFiScan::RunEvilPortal(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else - led_obj.setMode(MODE_SNIFF); + #elif defined(HAS_NEOPIXEL_LED) + led_obj.setMode(MODE_SNIFF); #endif #ifdef HAS_SCREEN @@ -1187,8 +1187,8 @@ void WiFiScan::RunAPScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else - led_obj.setMode(MODE_SNIFF); + #elif defined(HAS_NEOPIXEL_LED) + led_obj.setMode(MODE_SNIFF); #endif Serial.println(text_table4[9] + (String)access_points->size()); @@ -1612,8 +1612,8 @@ void WiFiScan::RunPacketMonitor(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else - led_obj.setMode(MODE_SNIFF); + #elif defined(HAS_NEOPIXEL_LED) + led_obj.setMode(MODE_SNIFF); #endif startPcap("packet_monitor"); @@ -1691,8 +1691,8 @@ void WiFiScan::RunEapolScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else - led_obj.setMode(MODE_SNIFF); + #elif defined(HAS_NEOPIXEL_LED) + led_obj.setMode(MODE_SNIFF); #endif num_eapol = 0; @@ -1832,7 +1832,7 @@ void WiFiScan::RunPwnScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.setMode(MODE_SNIFF); #endif @@ -2025,7 +2025,7 @@ void WiFiScan::RunBeaconScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.setMode(MODE_SNIFF); #endif @@ -2084,7 +2084,7 @@ void WiFiScan::RunStationScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.setMode(MODE_SNIFF); #endif @@ -2128,7 +2128,7 @@ void WiFiScan::RunRawScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.setMode(MODE_SNIFF); #endif @@ -2174,7 +2174,7 @@ void WiFiScan::RunDeauthScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.setMode(MODE_SNIFF); #endif @@ -2233,7 +2233,7 @@ void WiFiScan::RunProbeScan(uint8_t scan_mode, uint16_t color) xiao_led.sniffLED(); #elif defined(MARAUDER_M5STICKC) stickc_led.sniffLED(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.setMode(MODE_SNIFF); #endif diff --git a/esp32_marauder/WiFiScan.h b/esp32_marauder/WiFiScan.h index b6145530e..ae3f166a2 100644 --- a/esp32_marauder/WiFiScan.h +++ b/esp32_marauder/WiFiScan.h @@ -41,7 +41,7 @@ #include "xiaoLED.h" #elif defined(MARAUDER_M5STICKC) #include "stickcLED.h" -#else +#elif defined(HAS_NEOPIXEL_LED) #include "LedInterface.h" #endif @@ -119,7 +119,7 @@ extern Settings settings_obj; extern xiaoLED xiao_led; #elif defined(MARAUDER_M5STICKC) extern stickcLED stickc_led; -#else +#elif defined(HAS_NEOPIXEL_LED) extern LedInterface led_obj; #endif diff --git a/esp32_marauder/configs.h b/esp32_marauder/configs.h index f097218c8..c2fca8c80 100644 --- a/esp32_marauder/configs.h +++ b/esp32_marauder/configs.h @@ -8,6 +8,7 @@ //// BOARD TARGETS //#define MARAUDER_M5STICKC + //#define MARAUDER_M5CARDPUTER #define MARAUDER_MINI //#define MARAUDER_V4 //#define MARAUDER_V6 @@ -26,6 +27,8 @@ //// HARDWARE NAMES #ifdef MARAUDER_M5STICKC #define HARDWARE_NAME "M5Stick-C Plus" + #elif defined(MARAUDER_M5CARDPUTER) + #define HARDWARE_NAME "M5Cardputer" #elif defined(MARAUDER_MINI) #define HARDWARE_NAME "Marauder Mini" #elif defined(MARAUDER_REV_FEATHER) @@ -55,7 +58,7 @@ //// BOARD FEATURES #ifdef MARAUDER_M5STICKC //#define FLIPPER_ZERO_HAT - #define HAS_BATTERY + //#define HAS_BATTERY #define HAS_BT #define HAS_BUTTONS //#define HAS_NEOPIXEL_LED @@ -63,7 +66,21 @@ #define HAS_SCREEN #define HAS_SD #define USE_SD - #define HAS_TEMP_SENSOR + //#define HAS_TEMP_SENSOR + //#define HAS_GPS + #endif + + #ifdef MARAUDER_M5CARDPUTER + // #define FLIPPER_ZERO_HAT + // #define HAS_BATTERY + #define HAS_BT + #define HAS_BUTTONS + // #define HAS_NEOPIXEL_LED + // #define HAS_PWR_MGMT + #define HAS_SCREEN + #define HAS_SD + #define USE_SD + // #define HAS_TEMP_SENSOR #define HAS_GPS #endif @@ -278,6 +295,26 @@ #define D_PULL true #endif + #ifdef MARAUDER_M5CARDPUTER + #define L_BTN -1 + #define C_BTN 0 + #define U_BTN -1 + #define R_BTN -1 + #define D_BTN -1 + + //#define HAS_L + //#define HAS_R + //#define HAS_U + //#define HAS_D + #define HAS_C + + #define L_PULL true + #define C_PULL true + #define U_PULL true + #define R_PULL true + #define D_PULL true + #endif + #ifdef MARAUDER_V6 #define L_BTN -1 #define C_BTN 0 @@ -392,6 +429,140 @@ #endif + #ifdef MARAUDER_M5CARDPUTER + #define SCREEN_CHAR_WIDTH 40 + //#define TFT_MISO -1 + #define TFT_MOSI 35 + #define TFT_SCLK 36 + #define TFT_CS 37 + #define TFT_DC 34 + #define TFT_RST 33 + #define TFT_BL 38 + // #define TOUCH_CS -1 + + #define SCREEN_BUFFER + + #define MAX_SCREEN_BUFFER 9 + + #define BANNER_TEXT_SIZE 1 + + #ifndef TFT_WIDTH + #define TFT_WIDTH 135 + #endif + + #ifndef TFT_HEIGHT + #define TFT_HEIGHT 240 + #endif + + #define CHAR_WIDTH 6 + #define SCREEN_WIDTH TFT_HEIGHT // Originally 240 + #define SCREEN_HEIGHT TFT_WIDTH // Originally 320 + #define HEIGHT_1 TFT_WIDTH + #define WIDTH_1 TFT_WIDTH + #define STANDARD_FONT_CHAR_LIMIT (TFT_WIDTH/6) // number of characters on a single line with normal font + #define TEXT_HEIGHT (TFT_HEIGHT/10) // Height of text to be printed and scrolled + #define BOT_FIXED_AREA 0 // Number of lines in bottom fixed area (lines counted from bottom of screen) + #define TOP_FIXED_AREA 48 // Number of lines in top fixed area (lines counted from top of screen) + #define YMAX TFT_HEIGHT // Bottom of screen area + #define minimum(a,b) (((a) < (b)) ? (a) : (b)) + //#define MENU_FONT NULL + #define MENU_FONT &FreeMono9pt7b // Winner + //#define MENU_FONT &FreeMonoBold9pt7b + //#define MENU_FONT &FreeSans9pt7b + //#define MENU_FONT &FreeSansBold9pt7b + #define BUTTON_SCREEN_LIMIT 6 + #define BUTTON_ARRAY_LEN 100 + #define STATUS_BAR_WIDTH (TFT_HEIGHT/16) + #define LVGL_TICK_PERIOD 6 + + #define FRAME_X 100 + #define FRAME_Y 64 + #define FRAME_W 120 + #define FRAME_H 50 + + // Red zone size + #define REDBUTTON_X FRAME_X + #define REDBUTTON_Y FRAME_Y + #define REDBUTTON_W (FRAME_W/2) + #define REDBUTTON_H FRAME_H + + // Green zone size + #define GREENBUTTON_X (REDBUTTON_X + REDBUTTON_W) + #define GREENBUTTON_Y FRAME_Y + #define GREENBUTTON_W (FRAME_W/2) + #define GREENBUTTON_H FRAME_H + + #define STATUSBAR_COLOR 0x4A49 + + #endif + + #ifdef MARAUDER_M5CARDPUTER + #define SCREEN_CHAR_WIDTH 40 + //#define TFT_MISO -1 + #define TFT_MOSI 35 + #define TFT_SCLK 36 + #define TFT_CS 37 + #define TFT_DC 34 + #define TFT_RST 33 + #define TFT_BL 38 + // #define TOUCH_CS -1 + + #define SCREEN_BUFFER + + #define MAX_SCREEN_BUFFER 9 + + #define BANNER_TEXT_SIZE 1 + + #ifndef TFT_WIDTH + #define TFT_WIDTH 135 + #endif + + #ifndef TFT_HEIGHT + #define TFT_HEIGHT 240 + #endif + + #define CHAR_WIDTH 6 + #define SCREEN_WIDTH TFT_HEIGHT // Originally 240 + #define SCREEN_HEIGHT TFT_WIDTH // Originally 320 + #define HEIGHT_1 TFT_WIDTH + #define WIDTH_1 TFT_WIDTH + #define STANDARD_FONT_CHAR_LIMIT (TFT_WIDTH/6) // number of characters on a single line with normal font + #define TEXT_HEIGHT (TFT_HEIGHT/10) // Height of text to be printed and scrolled + #define BOT_FIXED_AREA 0 // Number of lines in bottom fixed area (lines counted from bottom of screen) + #define TOP_FIXED_AREA 48 // Number of lines in top fixed area (lines counted from top of screen) + #define YMAX TFT_HEIGHT // Bottom of screen area + #define minimum(a,b) (((a) < (b)) ? (a) : (b)) + //#define MENU_FONT NULL + #define MENU_FONT &FreeMono9pt7b // Winner + //#define MENU_FONT &FreeMonoBold9pt7b + //#define MENU_FONT &FreeSans9pt7b + //#define MENU_FONT &FreeSansBold9pt7b + #define BUTTON_SCREEN_LIMIT 6 + #define BUTTON_ARRAY_LEN 13 + #define STATUS_BAR_WIDTH (TFT_HEIGHT/16) + #define LVGL_TICK_PERIOD 6 + + #define FRAME_X 100 + #define FRAME_Y 64 + #define FRAME_W 120 + #define FRAME_H 50 + + // Red zone size + #define REDBUTTON_X FRAME_X + #define REDBUTTON_Y FRAME_Y + #define REDBUTTON_W (FRAME_W/2) + #define REDBUTTON_H FRAME_H + + // Green zone size + #define GREENBUTTON_X (REDBUTTON_X + REDBUTTON_W) + #define GREENBUTTON_Y FRAME_Y + #define GREENBUTTON_W (FRAME_W/2) + #define GREENBUTTON_H FRAME_H + + #define STATUSBAR_COLOR 0x4A49 + + #endif + #ifdef MARAUDER_V4 #define SCREEN_CHAR_WIDTH 40 #define HAS_ILI9341 @@ -814,6 +985,24 @@ #define ICON_H 22 #define BUTTON_PADDING 60 #endif + +#ifdef MARAUDER_M5CARDPUTER + #define BANNER_TIME 50 + + #define COMMAND_PREFIX "!" + + // Keypad start position, key sizes and spacing + #define KEY_X (TFT_WIDTH/2) // Centre of key + #define KEY_Y (TFT_HEIGHT/5) + #define KEY_W TFT_HEIGHT // Width and height + #define KEY_H (TFT_HEIGHT/17) + #define KEY_SPACING_X 0 // X and Y gap + #define KEY_SPACING_Y 1 + #define KEY_TEXTSIZE 1 // Font size multiplier + #define ICON_W 22 + #define ICON_H 22 + #define BUTTON_PADDING 60 + #endif //// END MENU DEFINITIONS //// SD DEFINITIONS @@ -844,7 +1033,27 @@ #endif #ifdef MARAUDER_M5STICKC + /* Set up SPI SD Card using external pin header + StickCPlus Header - SPI SD Card Reader + 3v3 - 3v3 + GND - GND + G0 - CLK + G36/G25 - MISO + G26 - MOSI + - CS (jumper to SD Card GND Pin) + */ + #define SD_CS -1 + #define SD_SCK 0 + #define SD_MISO 36 + #define SD_MOSI 26 + #endif + + #ifdef MARAUDER_M5CARDPUTER + #define SD_CS 12 + #define SD_SCK 40 + #define SD_MISO 39 + #define SD_MOSI 14 #endif #ifdef MARAUDER_FLIPPER @@ -896,6 +1105,8 @@ // These values are in bytes #ifdef MARAUDER_M5STICKC #define MEM_LOWER_LIM 20000 + #elif defined(MARAUDER_M5CARDPUTER) + #define MEM_LOWER_LIM 20000 #elif defined(MARAUDER_MINI) #define MEM_LOWER_LIM 20000 #elif defined(MARAUDER_REV_FEATHER) @@ -938,6 +1149,8 @@ //// EVIL PORTAL STUFF #ifdef MARAUDER_M5STICKC #define MAX_HTML_SIZE 11400 + #elif defined(MARAUDER_M5CARDPUTER) + #define MAX_HTML_SIZE 11400 #elif defined(MARAUDER_MINI) #define MAX_HTML_SIZE 11400 #elif defined(MARAUDER_REV_FEATHER) @@ -1000,6 +1213,11 @@ #define GPS_TX 33 #define GPS_RX 32 #define mac_history_len 512 + #elif defined(MARAUDER_M5CARDPUTER) + #define GPS_SERIAL_INDEX 1 + #define GPS_TX 1 + #define GPS_RX 2 + #define mac_history_len 512 #elif defined(MARAUDER_REV_FEATHER) #define GPS_SERIAL_INDEX 1 #define GPS_TX 6 diff --git a/esp32_marauder/data/marauder240_135.jpg b/esp32_marauder/data/marauder240_135.jpg new file mode 100644 index 0000000000000000000000000000000000000000..7b285e0d3c71d6f6c0e76ae8a39398f41d5bcb84 GIT binary patch literal 13722 zcmeHtWmH^Ex8@;@1`F;Ef#B}YKoT^;f;++8-2w!+0Ko|)XwZIfcMBfe-Mt%aLIcD5 zeRuBtX6CN3f3w!qIlH=6opWmSQ@g76-cQxz{Np=pC53m9Nfd2Fh9{@d-ke;r;6FGp21p2oc)Te540OcP~0l*rG;@`{8NG$*M&NBdb zh6Eu0+dJORp8ePIi>$w!drBrx@^{<+_ZVa0#i%X{f2lDJf|gIhkqc*%>G)S%hA(bMx@?^V2YkNC@+abMo=?{@n-?1_lNe zCKf3+HYqP1B^~eoaeC|o@X!Ho;5!J34tR!#1j0jl>;-6^{w>N=kNw?g|CW%Rfsj#9 z(agL2=ojYgo1+n1RN>g={bOmhk{SXBaKR+W{O7dLdYAO_ye6mrmBlb zeFDnJ_t7;3<2f-2DH%D_OJ*ns^>E-R?8~QmcJR&kGIw|>UN@`kqMrK}qL19tx&yv#Wn%cVhhQ_Am?w;Ph{()bE zLz7d}GqZE^3yT|@TiZLkd;156u=9({tLq#1?VrDKApxL&!uoe){~a#8CtS~vkwM64 zf8#=W=Jg~XJY*C)9#nj3H8fKf0(#zHbV8ZLA5~o#41DTPqK~c<&xslNH<)05L;DA^ z|2<$K|5wQV9oT>1S_H5_NKeWG;Q?Ua_Tj54+WR7wEGav)SuJPD@6W&~Ci>l$&GC3M z>0AQi?-xd{UA|6lL^NomUEO3E(OTFkStuvAd`EDz8opAO5TJD#J+K)6i!!h-wY|^x z+id6v;~&?;n}xt4$9QrM3smmmme5N96L{t&4`~9~!-<`!V!_q1i|T+z*T!UoF1Wjw zd|taT+=G)_-P?Hm%YGZ29kv_dWOw+Oiiv!?v7t{v_CzIBZg6oSMa(gbUhpgX-L5 zlQLbc8a{BBgqM)3Ei^m=g*>xw7L08zY5DNKb$ruK?iHGp{nf?Y8G3$Qs<9>F24=|d z9%|H6Op(YH+I=UWaC!1_d=T^EbWE;|UGHmVUEMSZYoks~35b+Fty=5)o1=Br#jcJv zw6X9JNXmv4RQBw4e^o_YCa9~Avt!LBYGl4F!C&FHvdj9EKNN*kaxlK~;4xei=q0hg zs7P`r4uL)bpR`-dIFl_^mDK*qMKP(UeK~Nm_C-LhZhI^i62aC% zJR4R}IgQ?8R@+*V__4VNq1mE3Vk}1OE;H?}>JebwI|&xz37&HppJ+v3P)wbsf6m$&@6ydz|WQEEkUY7!W9}R_B3R}{4ZS@9^X;`Ru}hd)N&q&zKMNrWsTRBc12fr=evpr z*gyHW^2wv`3qJzS6|U~4#L|lv!{R4`C-dh^zUn577T`I z@jqK6hYnB%`jn%JxXM)+vIw8LZNYddY~=h_?td-DpU$1s^C~b8V=;Kq^onWVLe|b0 z-^uI+2dn-p0ekPKnz8cS56`p(?mPm>^@}N0)3i;NE4#0&O~fcaW^=d;xG*na(C#_n z!Zn1aBf33gD+yjKm7Z7ywRgYvvGNgsHht}*EcAq`Jo`pS&eR%W(PCvT7V^dCp2fBx zU>Yw6r>=C`)AkX_vhc%fv2i@pJ5=G|Bup?W%H_z3t`bq2WheZ??E_BvaGjWv7t3&^ zcqvk|Rc*-;nyO%s9WFZQnaboJ+zPJ5g4FV}=P%E;wr|Pd)+fxGNk(z~`fkJa zVchgBz-c{B2w1joMR)~L8(O&E`@J!IWBi_wduX!y7C8x{^C)TfRu!#4IuEYCJ1I5? zHTQ)6I{ul!9vrN$Q5G6fj!v6k7GkG7-u-~nGI_>H5A|0cw?DZ1nlkAA5y^Div?ak7 z_&w#%0NqlJOStB!#R+9kRvhlybs5m3MS2Sm?SnB| z$%LZCWw}y!Xd5Oi!+l(N$Gq@MC0lS*99cliS9fo#+gPiV7)d@iMhh#vvDgXj7y0=5 zPZH(c6kE3!eh;MYnYM_2gCgwcu)Kbng(u|R3;oCXTN%;^o=`7qOFnkBEQt z$5W=4L)n&~0>ciQJ{NZ`=oxWmd=U|TaI8YL4?65XRX*8RtI7LI@VvTA{&pE-ZQwh_ zUuY&Mjxw{QQ;Ly^3Un7tVp5j0NXduJ!1!O^vA{3j?ZZ8pF6|v(2GCujH8Dx-@d=TB zuT!@Mu#F-lw#qt4{NGKiHwAyJw@8=6d@)LM8pVsVjF#a`jPr5RiRoQND?(pmlmc zb%LS0!(d_nbY?#Se`zF7K@@K#uTSmn7EVto+^2p`iuoqFT0eWv0_1)Ak4&-?>XBWa z`hic0Fmb4B%Q{{o7K`%cX>@7J$~36rNW2C72euOMxT3_RUHnh=6{^jsl88WVl#U`~ z$oOq;Q$!>Cz7?~HWnB;%>BfdH{B}t~o@@gjG0^5S`)`u13XgAXWT_07?s3aDL{*|| z_3hFc8rrL}G0YUUbOG`B2nOeE8s)dPS|!UDnKf0LYm|;$mnXclYzm*X8eI9kq`hr~ z)xYN|Q-H&~Umd-ZQIkR;1paFVssI9loXX*5J>1ei;+$0K^@US;i24@MRDn(rkui~j z11+@3k6)y&x!;#$Xf*sGpff=E@NHx$G+Z6k_4P9(vQG3{eJyO4N`;~>inoLW{5-w$ zL!Vs6FvzZGGr#49j;3q~*VU*Bc?{D$w7IFQOi-^<+?33uT_&{%Jka>dwn76d>Nj?> zV%ZC6~N3-mqfV8_61j8PFB_~eG(k%Xz@4i-^#}wxcqfy z%$QS)uK2I2C?rH$7=(fPGTX~c*@YefD?9Ou0>LVF7pdp=VyajH%L(?`A4`q`>8ABa z?PV)`oM|armRr^nLmQZbL*%Fnv>Y1v6PFaT%_341JSGAQDR}O4iv<=oeIDckq)u)A z$D=+Lv}w`O&0ZR!OqY zOC=PM@8|d?%P^;l!wtcbMYT9-e=;(X?{OxC z(Taf0DlSg*)@Gjq5zE5&eyd?ywnouGBTKg&cqd?V1WSo!LmK|#@@wDV%Hx_0GnI5% zMrH1JoF{8a*S{)hkn5CqEj#)J*LL|_%XCkR#gnj2B*Jv7RP=yRR#~-)SB?zYdH3Q`VE3$yi@jwm)c7 z4a>C3nKm0^tP)F5mu3$Az3rmcrT2=GG&*Opyl^G8Rk}h49we7}r<(h#A%P;-j?yCJ zQdLErZI6Z$q0#|k&Mns6Tzb#0@s-*AsGnCw`irvgQK-g8pKF_cok@A0h%59K2HlfI z-F9AXO86AMVkyg$}-*^a}qdNLkpx`JXl1zPAD7sqCYR|Xp++Gz;#gqKI2{Y zV2ZpXn)hGmLCC>o24dk*|Wdzr-b}; zqoDsC+grxX{M1=of zCO}W$AfsTQpkNSUV`3BjAE$pZ6A=Iughc=UnF*lo|9NHtQJNRcg0wnw_!KcYfoo0> z(jKwtrrNX@+4%2$WabL}S)Jg;{(1o%;2#hno&-U1r558%$+b{hQIQ$e5fqP!`JXn)W1Wo?Mi%-0l`qj)G}~v@32};oDvMJ){D0775r~p@m{ieuPVEb$Cu& z`(1tqMXLG;U#X^bnObk)1>%+6herU(R?k!ZQiVtXrQ?&w3Hfs1+4~Um1mjj6f-6K> z=kbZr`6W!hkQLTK~z!&Ub9T`hVFyuEDS z5S~9<=amMG?Zt{USsiQ$`;HGQ;|GsGxo)^VmN=oN`~uUYva2Vtq}bJ0F3tN1$Tcvb%@sLHiNdEUQf0SPm3{LLxHt zr);kMOaQ#ou^>F%HR!l!$0cd<0|NJfvvpCE_fEjjZ_aDt#%j^*F9TE2FR9vMYTLy_ z5R_|%0P2?IPWbow#hZvrWBeYHWPyE;bo2F;txqaH!G+H46cf3Ia~$kucNg*`$5vg94!d=enk`a$`zOmbt7?@bWZgZ5v_&3Mg-o&g>s0fXR zyrbW`xhDiA%5#}M_v}-U=vg2Iywn{YygTxmv)}}))l4jbbfBFL)UWpfdKSxhtSxEa z8j`^vrovEMMWiF#%DxlflxKGyl(1{jn;vQ9ZL8ZSTsSQ9A*FT_@%s@Nbibuy?jI9~ zVs02CxujOgr8k&KD^gi+#8@WQ<|x)V5q8c50{l1fh32>-IUpBJds!>8wr1| zjJIdD9ylL?#4NQ(pz`by_(6Wo{nciZiAd9E!Z-{3dJ}7kEP0}W9Yw`*$4FsuZ4j4X zN?Z(A7J({hly#2>7)@W%!PV zot6=)VnLwC8hjyW^WqU$(hs^vVyl=4CvS;kGT&Tjo#`04g~pSldEXp?gcG)0GDglLsxV=<7Jbl`0xA?J&pMyGRFru4}st z!pPk_{rdi^evv;~r0*n{m9xK5+1K5BNf^gY$MG_KM@YtNEMfNsJV}T|KJmYp;g?Yf(?n0q&XC|8*`Xd zN)hWmWdJ;Xm4Tlo!`jnicv?jU9sv>^(R3oc(%!P62R~iv3UOva&0*&cgBHU|3rFSJ zZKG^wm9wnIb|o;ePSLuRo$A*=55jcG**_yCG>Pm7DZ*xd*=yH$m-X-<_@JCW?40;k z6-s_Zo>w2E6Yd3%cLZK-X&zcs;_$h*V;p3x%HfA z*EfvIi)Nbzi#=z_`$R%jHrY;;@U#f)$LE?ogtyLXmPx2zs6=~LI2MJ7%-NR_q~J(U zP`!2gXnkkvAGM?j7t7gwpDxGN&;D*}Bq^x@p11Yq8*@*a55EdNt3jhaMeEXdOVR9l zuD{2=ul8#ghAGr4!T}*<$NFn(WbVT++z~lCBv33~XlTyNu2^)v-%QMj?2&rbSW9El z;YWa1u`dfS!OFEA@;0)aC<_p+JhAr`w!fLTNO2ZV%W978Nabx1yZUnWlDM{G3IMMyK@s*H-8NGdRqLU9@ngt$eo1V3?|Q{=!t7 z&X|f6R_`-Vptb{+cDUqm$nVl?8TtTKwYLxxNg;lRzlmmii1I#ItQM+f;@2j1QEqnCf z*KvPkZ1psLk-OkcrLXOX=HgmO2T9L2A6*;A0nk_6ziA~_zYXf79j83&LQ3U z%A>okme3itbGKArH=4g%XE-9p3y;YlC6N0ExyT{G&*BB3iw)6-Q zBy)5RvVWA_i9Qu3tISoIWp5{gqrH#+Gw5VFE%ctL9tq(^|F zl6|u_h{T(t;s;X_sKh8m#)pw>!5i_)sbf7EOew$=X$bG=N~335pvfvRs_zuTT6AWM z*P*c?QdU{nb$E#UV*n;*XR_IHzFez!|DnvWuu$-|V9vE@pEt!Yt8HoWYJF z^ve(d18hM7_K`*49{dI-k&a6C^{wFAy6G?E8}Y=aiTg);!Wg;_jy1mI^`>|PKxg1v z{7Nta-)Sr6;OL{j>H3s;vFp+|<(px&Ij04elnPxZIMdz<`fx2m z3R;C08)UbZ69gsBBegeV@e_43XydFCbs-za*(FVYm~qcYl+~oM=MSwJ&K!?taY5Fb z;eGkiPOR@zC)o8Ts`+Yj+FR#DHgP{2F;3T&Ev4Jf4JB!Ltnh+D6dtYua5|vxa${ym z`p1r4xDGnA?lpdJvu3`Dp&DP%APVT9Ni}}eLh$s2{ zoCo%b4#(#NSn7gejBSEv<=bb-*?#<@lP5!iLW<2Ffe>$mN2Z`0Y%ao()TGQdtpM+7 z3+5^j7eRo#Inz4G9>@TVbuC%0Y?w0%J<6@o`rV`Tv`2FOzRtpIwAV`4fn9?ArM|37 zNM?3+rbBIcQhn;o{ay@025tuNj_GS?xYinGYR&R&$PCT<yHXjzV}94%#q{cslFr7_ScVUkF=1|K3^39mRk@ zl8-LM6p6N%(P{@-mVqgiuPIQ3l*fs^=!|{ga}XWP@A5UD+<&6Fdf^*cs#%XunD0Eq zR9EBYay!f7nbDHL(WQ10&1caT20~N!PzH$Y#n}mFPEZi@p0c4j%-+0KKO=Sab<;YI z49^uqk!|sL<)Q|Wkl@v>7Xt61Dcl<74!t}uk{qLi7_RYoAygEg;^(%KAecP~r)4~U z)P%vFo%y+hDDF_}O2lY6Urma-<&N=a z?t$vQSdzrR<_2|fGw8*FPHQmH1$OT+@^Cn^|HRNyPW}@^j2-xOA6!!$AxQwQ(S$mz z^#3S_$7l$V_h(d$V+t%^vpe+lrp-xeaIXwgEe$#MD(oFgtF$i|NzFf;nY;n@Vbh%amc>wBVe;MR(|5r-VmzS5TeZ>bmLo3V%cl9mLl1{SmFw6#xFbu{ffsXv3-%ZsH0=R1=*4QwPAZS zP1KxVkxt*pAB{=$2J9Vto!7!t&SYN*eiKvYeG)OoLFmK4pZqn;4!CX8wAJB(2bVG5 zz#sGzYQidfYey?I-9_=(?F z&AGx@iigea`c(LP`+p*=?{ht9B6GOwVVnt@=*Jes3KkxP#@*w{UDUGi^51lP@GY%Y z`%?m+PV9j&+#NOQOS(rx>{Iynl`T-M-AEY9+qr5 zT3&t&9hup&;QVCXFGR+%bC1A=+5Q82TN@0koh5wJ&wBwvH*?C#Z)sA6h9^tO_*RKE z1loP>zXQVM{*5*@HO%0`?h@nSvHVvGC}bWf+~;mNJ4s}(LY<1|x36}FKN{?1;pPdN z;SASwU5)LzzRq&Sj++bNiykMol*FZB`c1YJIvF-XuG%!thfF_JB;8f|hna`2=_d}q zz2BpwM(G;qr_&vHQILjfbm79sud2mKcuWMs1)DqZfW~wh(WGfK!e$f7QkJW9_O%n& zmPaNk*H&{>hMYIW- zegOZ4rmnfJG}^OvnHAYB1u4wtIXH{T<=@Wd`1_wUb{@JDxc5 zKLVn=3rvj@kas%ItTBnKVw)vb`WT-q?;w3mAeKKKJlF}^u?dOrSMvMVoSJLptaZMS zzdG(j&;P-mBJCzbgz^VF;9LO34(xjvlB92`gW=R|>>rntD7J;wX*DPCEZ>*-|CIN) zu+WN>MY`1$&-ULK_=;2q19fGtCfM1}>0z%$lN|Fc+v?@Sg~cj3p?gp3){e7bP$|Uo zD}Af@BE4!<-(l79S&u7hvjvvFKj-=Ia%Q4J{Yd+hoDXVtbyWyeD`^TmBQa#KS*n_~ zRx$BUL7ZRlisF)aTlhzF*6*P&NPm%mc|^v9_x;?R=Q!HO8Jb54@Bhf6I8 zsjg};ZkCT5Q4;;LL|xnd9%oLHV_vS@Hizc-vm+zA>RO+n#!NB7EZb^nj>R{yg3k&R zr03>%&5bhX;{$61b!=;t2p8D<-8QfLqE(VsC2SlK+Bj{MXgf?1D;CYy#EH47AA6C) z7BNvT65ub56SxqjcS_#vb04N1Jt9xVd2dL(^gf@6r@6g$u_IKMA5-3pJT28{M5Q$o zhLm?$Lqfc6s5zY|_XQvPg|reE53h-TE3scJmsj;Uh^xIOTkaPzS154n^}L36_fN|j z44vqdzbE}&deCn$duSFo637zz9v-R- zju+h@fv7dARz9yEhn|b6-!{@Kul$BbC1!V-5>FP#C~T;37;K2oZM0nmiQ}K;W+b1q z1rD6dipe-Fx_#nx_T55Umx-ug!R6K$+G!9%ziZj@F%MPsqXfttRx(8(=4KqzWsT2> z_Iz}(Sdbbu0i^!GIU|ut1j?NV{BTe6%fNkMk%0~ImonBtfxZz3eAY7VmAJlntiRs4 zBK5PCK@H;~J_#J1J?rr(k+14qY|q8{PNzdxmt>_?Q^QjFPOF!8{_|{kenM1 ziQtZ9$;Q7My4J$TNsdpTbFxsC2nd%`?Gjr=Jeh|AzEX%~Mxn_lIV;qh(NvD~≶U z4PW;kDrnTLTZ>grSA+KC%gx;rLYe1OTVkkhEPS@B*x=^(!gr9^b~5N$RGlGFrAL76 zol-Qq<4LUq>z!WC+zxw%d+L`VhlQ@8jAysO80uZhFF4b{ykL8-MGB4k{B}CqKq9DT zm7fE2by6lXA^ooy{g$6r>9?EKF&VTL=NTZuNlkrgS^@vIEfs?KHzab<%|Yx~y8I;j zoua{ew4LmWlQvkgUM;k!qtctEr;MNcWrm+XV7C~(WKv6 z1X0hQ9JHN0PSc**w?VMOiXc$TK5~*ccaWpMuBmY5tjN}dTFUQ&L7i%Re1~cJlW$w(JG(m;GRF#)Ai2Wo_TcSSHm9X(L!Bk+T zZ9JN*esQ5;&~Z`_&A>k&Il1d#e}=g$Xi>j^4S1l%C4_&3JAMqDDOgbwx(>KzNa82K zlcV>^5}&mg+-SNQgZn0xyppSbXls{C$zDG&{W+DXwF}qwhSWZhFTWpx$J>KM!Q*<+ zvjw5+pU}M%>2-9c+S_Y*+56hMr}#YLy}kmSl2`_)WPU_fPsrNBeDPSuVJ-X@#HI3L zJ0ZKnzRVck`sw(UzfZshm5%jdUuEizno-%;Bo;F#UgucC6u0L?r9H?z>SXd*VC*_7 z#WS60PRQA5QCnMc%3jXy=4-|p`Q93_DiKS@B!xl7%!eq1O%#)=$UI;o=5a4V1mC&y z3mj|K?p&ie$ZUwn9i9+ZyDlrNW&-LO6}*%vtrJTNkSssb??f(kUXlT~j?sVboc>Sc zND9YDRC{KP@)20LGx$+p(mK_4y*J|3ySiW25brvM?_QRS4-c-mXhh_ zFZWR?kLI$J=CJ(*#SPBwol9_ea!jozPqarH)3;6KRB_P9c!RL+v^-d4zxr%nia~W) z7s9-M|DYJWA0EABSP-XxW%Ww3)ImR!Ykw9;TW?W$K3`YZ-&EwSK5;7WMliv4_m5Ia zq80C3#+EK5(qD#Ozse-}E8aJ>v)bmcH&45FP_8W*OJ<w1Y>gYbR|pmzna< z$B6kFc0`W8Fph(M4z&5qlq%+HYMse*jouH;@4(4PS%yI(eqR*5qaa-2Pkcv1d2a5H z7?@qJ0;p%h4@JKA9_;8}jdQcK9RJyT+c!DaiQnQ(Iny#z)=MlsJIU_J1GHL;XtsKa zGYi(d`v+82kovAmAdrfaOpCr&`AP0L#(4eob-txhH=>%T+38{Wul-lo+?SfqZ885? z?Jm??h|iIUYh0?lX=bUwH;Q?Ek_%^`0Ye-89)VvpkARciWqT{yweo$2xEK^yX;z?( zn5_0_oJ88p#j7APlfsS;U!hufGimeiZP1!fM)RQsS5lZZ;5XCPz1V%;?#VL9a7pyr zdjPjo-n>2~dnY|M`$~l7-WP85@Z4d21!Mr%F0i|KppSV6!--&zcsE&;%DtHFrr?Wi=Otg*pdgA6mOl%w>>OgelX?DWPtvSeC=sT8W+kxTF>+$Ll*fwcT z7*?`6!rv2N$iAOJ1co;~0^tv&4UI{A`ZL{?$;FiicsCY<$ehbTb@2}=S(_Y|N1HS; zH$50yO^F}Fu{*c&;#Gn^9QtYJ>ly2m94Fr}ly?jx#^Z-=g3LCEC2ir+&FY4!W1a|x zi(?0b05m)E`p3(*Qr7llM{}DTIWQl}7&neGFYeTNIaj14ds^S(aRc(^BClD)`^Iii ze}KYx$uqqopXGzxzfwX`yC2BzQ_(^lIS_%F%?Z* zo?Wm>lvaIP#w8F#G3WQD z!6xq&A#0ZyJ-#AA<1e8t+XRS%!&ZYfYcRPbuOw-9)zKhC1A&N9nR2*n%n>u6kH5PP zT?0JCuglxKRBadqhvubk+Q!x3L3+truopG>jAk~*UwTEpfzaOr7V4ec=jFU?%r3jQ zDrV;%&gLyXkoZvwRk0-TuQ6SykJ)UaBEXXObc*PIB8D?l*6kA0{^0K`Hd?QcU%B=U zIur1I(WY=afScp{>^4Pf{`@99t(Dm<3Y~9;i`=~vU$!W1UNa;UpTjq3@}X?;t#f#C zUN5}MbfOnrQ;#mjg-GMjw04`Fun;@}L7m!qU**RGr$CNbDx>7vf+AgmlHWdnD(v7H zW^kts?ceqZxh1P{Q>(Hqx-U*{T}5b5_EnUZ=dwPKkqODf+(4XEz=_xMoRqyEV%^@2 z;m*5WtldHabs!=F=X&XD1me0*?)A+$Njf%}-sd;wA1!G(x8iY?ahoKLtTy74Nj|&l z=aL-0CyneKw4(^P78yXRVk9EnLy79#K7tEv%tS=CQ!ix2RT+%F$~L%t?Yn-mlv6-S z5F6jV+yx7jnb~d7sW5A(`prSWMw6Xb){eo*MR^6dD&vUGrCdb|&`g)K*xo|sI#vUg z2Hn^>g!)LE{f|;PziLf5_%#?3;@`GVzpgkUu+uA?xtzyWVUU;E12GGeL4JZwX%;tc z*0p0V*U%4BeI0H>u2yW9msNtm3(9Hiv56A%Sw(%Su}8GDk>St%dlBE4)g8fleKgs#VT!QD_DL)Q^D5Y@>0^8o56Y)VNzHhYm(uLY!-A zKT(jJUXacv_F0pS)RHlILYje0+|4+xd09|3D4Y=3_GQ%XZc*r#$fyIKH zGc^VO1N5d$^(ACSJn_yEPbE^Fgw&Bh_4`7wb)408JnUdj069x}@?=xT{e-CU4NUi0 z*)EYuB-yv=s*g?mGh=uzvU2%>6Kf3(@sh$zN95S)p*;_zxvH5u6v`JT5J&cT#Tb+^ zW_J(sFHTZ|scQ4u!%GR1as5e8$H@LZNcq2zB>vS-oJ%!@V;kf`#*8bPUH4bL#H+;W8Y6Z-TP>Z;Rr8_gH*xEirs;5*Lu!vF9eMlM7nKql@|?1l;JAZ z`8GyDd=zpgS_85-&zB)cUpF!}3YCSX4Dk=WCgEcPU6L3R%q_Z%KK5HW`H`-@vQ2}> zA|TklU9Y(Q)~I%0HFry+sXfIj$6R*1IZ7|_92I^wqa4GqLTcOVo2;M=7^PJ&S(vd! qil36&XFBT&F7JxF>^?#@BiJpABY#UAq3ScWw@>FU|8qflT=*~3VKJKk literal 0 HcmV?d00001 diff --git a/esp32_marauder/esp32_marauder.ino b/esp32_marauder/esp32_marauder.ino index a974e19e9..204a0c97d 100644 --- a/esp32_marauder/esp32_marauder.ino +++ b/esp32_marauder/esp32_marauder.ino @@ -101,9 +101,11 @@ CommandLine cli_obj; SDInterface sd_obj; #endif +#ifdef HAS_PWR_MGMT #ifdef MARAUDER_M5STICKC AXP192 axp192_obj; #endif +#endif #ifdef MARAUDER_FLIPPER flipperLED flipper_led; @@ -111,7 +113,7 @@ CommandLine cli_obj; xiaoLED xiao_led; #elif defined(MARAUDER_M5STICKC) stickcLED stickc_led; -#else +#elif defined(HAS_NEOPIXEL_LED) LedInterface led_obj; #endif @@ -151,9 +153,11 @@ void backlightOff() { void setup() { + #ifdef HAS_PWR_MGMT #ifdef MARAUDER_M5STICKC axp192_obj.begin(); #endif + #endif #ifdef HAS_SCREEN pinMode(TFT_BL, OUTPUT); @@ -192,11 +196,11 @@ void setup() backlightOff(); // Draw the title screen - #ifdef HAS_SCREEN - #ifndef MARAUDER_MINI - display_obj.drawJpeg("/marauder3L.jpg", 0 , 0); // 240 x 320 image +#ifdef HAS_SCREEN + #if defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5CARDPUTER) + display_obj.drawJpeg("/marauder240_135.jpg", 0 , -90); // 240 x 135 image #else - display_obj.drawJpeg("/marauder3L.jpg", 0, 0); + display_obj.drawJpeg("/marauder3L.jpg", 0, 0); // 240 x 320 image #endif #endif @@ -217,6 +221,7 @@ void setup() // Do some stealth mode stuff #ifdef HAS_BUTTONS + #if (C_BTN >= 0) if (c_btn.justPressed()) { display_obj.headless_mode = true; @@ -225,6 +230,7 @@ void setup() Serial.println("Headless Mode enabled"); } #endif + #endif display_obj.clearScreen(); @@ -243,14 +249,19 @@ void setup() wifi_scan_obj.RunSetup(); + String freeRAM = wifi_scan_obj.freeRAM(); + + Serial.println(freeRAM); + #ifdef HAS_SCREEN - display_obj.tft.println(F(text_table0[2])); + display_obj.tft.println(String(F(text_table0[2])) + " - " + freeRAM); #endif buffer_obj = Buffer(); #if defined(HAS_SD) // Do some SD stuff if(sd_obj.initSD()) { + Serial.println(F("Initialized SD Card")); #ifdef HAS_SCREEN display_obj.tft.println(F(text_table0[3])); #endif @@ -274,10 +285,6 @@ void setup() display_obj.tft.println(F(text_table0[5])); #endif - #ifdef HAS_SCREEN - display_obj.tft.println(F(text_table0[6])); - #endif - #ifdef HAS_BATTERY battery_obj.battery_level = battery_obj.getBatteryLevel(); #endif @@ -289,8 +296,8 @@ void setup() xiao_led.RunSetup(); #elif defined(MARAUDER_M5STICKC) stickc_led.RunSetup(); - #else - led_obj.RunSetup(); + #elif defined(HAS_NEOPIXEL_LED) + led_obj.RunSetup(); #endif #ifdef HAS_SCREEN @@ -397,7 +404,7 @@ void loop() xiao_led.main(); #elif defined(MARAUDER_M5STICKC) stickc_led.main(); - #else + #elif defined(HAS_NEOPIXEL_LED) led_obj.main(currentTime); #endif diff --git a/esp32_marauder/keyboard.cpp b/esp32_marauder/keyboard.cpp new file mode 100644 index 000000000..3fe55ffcb --- /dev/null +++ b/esp32_marauder/keyboard.cpp @@ -0,0 +1,255 @@ +#include "Keyboard.h" + +#include +#include + +#define digitalWrite(pin, level) gpio_set_level((gpio_num_t)pin, level) +#define digitalRead(pin) gpio_get_level((gpio_num_t)pin) + +void Keyboard_Class::_set_output(const std::vector &pinList, + uint8_t output) +{ + output = output & 0B00000111; + + digitalWrite(pinList[0], (output & 0B00000001)); + digitalWrite(pinList[1], (output & 0B00000010)); + digitalWrite(pinList[2], (output & 0B00000100)); +} + +uint8_t Keyboard_Class::_get_input(const std::vector &pinList) +{ + uint8_t buffer = 0x00; + uint8_t pin_value = 0x00; + + for (int i = 0; i < 7; i++) + { + pin_value = (digitalRead(pinList[i]) == 1) ? 0x00 : 0x01; + pin_value = pin_value << i; + buffer = buffer | pin_value; + } + + return buffer; +} + +void Keyboard_Class::begin() +{ + for (auto i : output_list) + { + gpio_reset_pin((gpio_num_t)i); + gpio_set_direction((gpio_num_t)i, GPIO_MODE_OUTPUT); + gpio_set_pull_mode((gpio_num_t)i, GPIO_PULLUP_PULLDOWN); + digitalWrite(i, 0); + } + + for (auto i : input_list) + { + gpio_reset_pin((gpio_num_t)i); + gpio_set_direction((gpio_num_t)i, GPIO_MODE_INPUT); + gpio_set_pull_mode((gpio_num_t)i, GPIO_PULLUP_ONLY); + } + + _set_output(output_list, 0); +} + +uint8_t Keyboard_Class::getKey(Point2D_t keyCoor) +{ + uint8_t ret = 0; + + if ((keyCoor.x < 0) || (keyCoor.y < 0)) + { + return 0; + } + if (_keys_state_buffer.ctrl || _keys_state_buffer.shift || + _is_caps_locked) + { + ret = _key_value_map[keyCoor.y][keyCoor.x].value_second; + } + else + { + ret = _key_value_map[keyCoor.y][keyCoor.x].value_first; + } + return ret; +} + +void Keyboard_Class::updateKeyList() +{ + _key_list_buffer.clear(); + Point2D_t coor; + uint8_t input_value = 0; + + for (int i = 0; i < 8; i++) + { + _set_output(output_list, i); + input_value = _get_input(input_list); + /* If key pressed */ + + if (input_value) + { + /* Get X */ + for (int j = 0; j < 7; j++) + { + if (input_value & (0x01 << j)) + { + coor.x = (i > 3) ? X_map_chart[j].x_1 : X_map_chart[j].x_2; + + /* Get Y */ + coor.y = (i > 3) ? (i - 4) : i; + // printf("%d,%d\t", coor.x, coor.y); + + /* Keep the same as picture */ + coor.y = -coor.y; + coor.y = coor.y + 3; + + _key_list_buffer.push_back(coor); + } + } + } + } +} + +uint8_t Keyboard_Class::isPressed() +{ + return _key_list_buffer.size(); +} + +bool Keyboard_Class::isChange() +{ + if (_last_key_size != _key_list_buffer.size()) + { + _last_key_size = _key_list_buffer.size(); + return true; + } + else + { + return false; + } +} + +bool Keyboard_Class::isKeyPressed(char c) +{ + if (_key_list_buffer.size()) + { + for (const auto &i : _key_list_buffer) + { + if (getKey(i) == c) + return true; + } + } + return false; +} + +#include + +void Keyboard_Class::updateKeysState() +{ + _keys_state_buffer.reset(); + _key_pos_print_keys.clear(); + _key_pos_hid_keys.clear(); + _key_pos_modifier_keys.clear(); + + // Get special keys + for (auto &i : _key_list_buffer) + { + // modifier + if (getKeyValue(i).value_first == KEY_FN) + { + _keys_state_buffer.fn = true; + continue; + } + if (getKeyValue(i).value_first == KEY_OPT) + { + _keys_state_buffer.opt = true; + continue; + } + + if (getKeyValue(i).value_first == KEY_LEFT_CTRL) + { + _keys_state_buffer.ctrl = true; + _key_pos_modifier_keys.push_back(i); + continue; + } + + if (getKeyValue(i).value_first == KEY_LEFT_SHIFT) + { + _keys_state_buffer.shift = true; + _key_pos_modifier_keys.push_back(i); + continue; + } + + if (getKeyValue(i).value_first == KEY_LEFT_ALT) + { + _keys_state_buffer.alt = true; + _key_pos_modifier_keys.push_back(i); + continue; + } + + // function + if (getKeyValue(i).value_first == KEY_TAB) + { + _keys_state_buffer.tab = true; + _key_pos_hid_keys.push_back(i); + continue; + } + + if (getKeyValue(i).value_first == KEY_BACKSPACE) + { + _keys_state_buffer.del = true; + _key_pos_hid_keys.push_back(i); + continue; + } + + if (getKeyValue(i).value_first == KEY_ENTER) + { + _keys_state_buffer.enter = true; + _key_pos_hid_keys.push_back(i); + continue; + } + + if (getKeyValue(i).value_first == ' ') + { + _keys_state_buffer.space = true; + } + _key_pos_hid_keys.push_back(i); + _key_pos_print_keys.push_back(i); + } + + for (auto &i : _key_pos_modifier_keys) + { + uint8_t key = getKeyValue(i).value_first; + _keys_state_buffer.modifier_keys.push_back(key); + } + + for (auto &k : _keys_state_buffer.modifier_keys) + { + _keys_state_buffer.modifiers |= (1 << (k - 0x80)); + } + + for (auto &i : _key_pos_hid_keys) + { + uint8_t k = getKeyValue(i).value_first; + if (k == KEY_TAB || k == KEY_BACKSPACE || k == KEY_ENTER) + { + _keys_state_buffer.hid_keys.push_back(k); + continue; + } + uint8_t key = _kb_asciimap[k]; + if (key) + { + _keys_state_buffer.hid_keys.push_back(key); + } + } + + // Deal what left + for (auto &i : _key_pos_print_keys) + { + if (_keys_state_buffer.ctrl || _keys_state_buffer.shift || + _is_caps_locked) + { + _keys_state_buffer.word.push_back(getKeyValue(i).value_second); + } + else + { + _keys_state_buffer.word.push_back(getKeyValue(i).value_first); + } + } +} diff --git a/esp32_marauder/keyboard.h b/esp32_marauder/keyboard.h new file mode 100644 index 000000000..aaaac1f15 --- /dev/null +++ b/esp32_marauder/keyboard.h @@ -0,0 +1,192 @@ +#pragma once + +#ifndef Keyboard_h +#define Keyboard_h + +/** + * @file keyboard.h + * @author Forairaaaaa + * @brief + * @version 0.1 + * @date 2023-09-22 + * + * @copyright Copyright (c) 2023 + * + */ +#include +#include +#include "Arduino.h" +#include "Keyboard_def.h" +#include "configs.h" + +struct Chart_t +{ + uint8_t value; + uint8_t x_1; + uint8_t x_2; +}; + +struct Point2D_t +{ + int x; + int y; +}; + +const std::vector output_list = {8, 9, 11}; +const std::vector input_list = {13, 15, 3, 4, 5, 6, 7}; + +const Chart_t X_map_chart[7] = {{1, 0, 1}, {2, 2, 3}, {4, 4, 5}, {8, 6, 7}, {16, 8, 9}, {32, 10, 11}, {64, 12, 13}}; + +struct KeyValue_t +{ + const char value_first; + const char value_second; +}; + +const KeyValue_t _key_value_map[4][14] = {{{'`', '~'}, + {'1', '!'}, + {'2', '@'}, + {'3', '#'}, + {'4', '$'}, + {'5', '%'}, + {'6', '^'}, + {'7', '&'}, + {'8', '*'}, + {'9', '('}, + {'0', ')'}, + {'-', '_'}, + {'=', '+'}, + {KEY_BACKSPACE, KEY_BACKSPACE}}, + {{KEY_TAB, KEY_TAB}, + {'q', 'Q'}, + {'w', 'W'}, + {'e', 'E'}, + {'r', 'R'}, + {'t', 'T'}, + {'y', 'Y'}, + {'u', 'U'}, + {'i', 'I'}, + {'o', 'O'}, + {'p', 'P'}, + {'[', '{'}, + {']', '}'}, + {'\\', '|'}}, + {{KEY_FN, KEY_FN}, + {KEY_LEFT_SHIFT, KEY_LEFT_SHIFT}, + {'a', 'A'}, + {'s', 'S'}, + {'d', 'D'}, + {'f', 'F'}, + {'g', 'G'}, + {'h', 'H'}, + {'j', 'J'}, + {'k', 'K'}, + {'l', 'L'}, + {';', ':'}, + {'\'', '\"'}, + {KEY_ENTER, KEY_ENTER}}, + {{KEY_LEFT_CTRL, KEY_LEFT_CTRL}, + {KEY_OPT, KEY_OPT}, + {KEY_LEFT_ALT, KEY_LEFT_ALT}, + {'z', 'Z'}, + {'x', 'X'}, + {'c', 'C'}, + {'v', 'V'}, + {'b', 'B'}, + {'n', 'N'}, + {'m', 'M'}, + {',', '<'}, + {'.', '>'}, + {'/', '?'}, + {' ', ' '}}}; + +class Keyboard_Class +{ +public: + struct KeysState + { + bool tab = false; + bool fn = false; + bool shift = false; + bool ctrl = false; + bool opt = false; + bool alt = false; + bool del = false; + bool enter = false; + bool space = false; + uint8_t modifiers = 0; + + std::vector word; + std::vector hid_keys; + std::vector modifier_keys; + + void reset() + { + tab = false; + fn = false; + shift = false; + ctrl = false; + opt = false; + alt = false; + del = false; + enter = false; + space = false; + modifiers = 0; + word.clear(); + hid_keys.clear(); + modifier_keys.clear(); + } + }; + +private: + std::vector _key_list_buffer; + std::vector _key_pos_print_keys; // only text: eg A,B,C + std::vector _key_pos_hid_keys; // print key + space, enter, del + std::vector + _key_pos_modifier_keys; // modifier key: eg shift, ctrl, alt + KeysState _keys_state_buffer; + bool _is_caps_locked; + uint8_t _last_key_size; + + void _set_output(const std::vector &pinList, uint8_t output); + uint8_t _get_input(const std::vector &pinList); + +public: + Keyboard_Class() : _is_caps_locked(false) + { + } + + void begin(); + uint8_t getKey(Point2D_t keyCoor); + + void updateKeyList(); + inline std::vector &keyList() + { + return _key_list_buffer; + } + + inline KeyValue_t getKeyValue(const Point2D_t &keyCoor) + { + return _key_value_map[keyCoor.y][keyCoor.x]; + } + + uint8_t isPressed(); + bool isChange(); + bool isKeyPressed(char c); + + void updateKeysState(); + inline KeysState &keysState() + { + return _keys_state_buffer; + } + + inline bool capslocked(void) + { + return _is_caps_locked; + } + inline void setCapsLocked(bool isLocked) + { + _is_caps_locked = isLocked; + } +}; +#endif \ No newline at end of file From ed324715448e101fad5670b1de8df5b4ed2628dd Mon Sep 17 00:00:00 2001 From: Guido Aguiar Date: Mon, 6 May 2024 11:01:28 -0300 Subject: [PATCH 2/4] chore: Install BleKeyboard Library --- .github/workflows/build_push.yml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/.github/workflows/build_push.yml b/.github/workflows/build_push.yml index 867149351..330940527 100644 --- a/.github/workflows/build_push.yml +++ b/.github/workflows/build_push.yml @@ -12,6 +12,13 @@ jobs: runs-on: ubuntu-latest steps: + - name: Install BleKeyboard Library + uses: actions/checkout@v2 + with: + repository: T-vK/ESP32-BLE-Keyboard + ref: master + path: lib/BleKeyboard + - name: Checkout Code uses: actions/checkout@v3 From 2fbb1432e7011bf0a223e99190bc1371f27a2124 Mon Sep 17 00:00:00 2001 From: Guido Aguiar Date: Mon, 6 May 2024 11:10:23 -0300 Subject: [PATCH 3/4] feat: Add support for M5Cardputer --- .github/workflows/build_push.yml | 206 +++++++++++++++---------------- 1 file changed, 103 insertions(+), 103 deletions(-) diff --git a/.github/workflows/build_push.yml b/.github/workflows/build_push.yml index 330940527..aca2edc59 100644 --- a/.github/workflows/build_push.yml +++ b/.github/workflows/build_push.yml @@ -8,62 +8,62 @@ jobs: # This workflow contains a single job called "build" build: name: Build Marauder Binaries - + runs-on: ubuntu-latest - - steps: - - name: Install BleKeyboard Library - uses: actions/checkout@v2 - with: - repository: T-vK/ESP32-BLE-Keyboard - ref: master - path: lib/BleKeyboard + steps: - name: Checkout Code uses: actions/checkout@v3 - + - name: Install ESP32 Boards and Compile TestFile uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: TestFile.ino arduino-board-fqbn: esp32:esp32:esp32s2 platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.10/package_esp32_dev_index.json - + - name: Pull arduino-esp32 v2.0.4 uses: actions/checkout@v2 with: repository: espressif/arduino-esp32 ref: 2.0.4 path: 2.0.4arduino-esp32 - + - name: Pull arduino-esp32 v2.0.10 uses: actions/checkout@v2 with: repository: espressif/arduino-esp32 ref: 2.0.10 path: 2.0.10 - + - name: Install AsyncTCP uses: actions/checkout@v2 with: repository: me-no-dev/AsyncTCP ref: master path: CustomAsyncTCP - + + - name: Install BleKeyboard Library + uses: actions/checkout@v2 + with: + repository: T-vK/ESP32-BLE-Keyboard + ref: master + path: lib/BleKeyboard + - name: Install MicroNMEA uses: actions/checkout@v2 with: repository: stevemarple/MicroNMEA ref: v2.0.6 path: CustomMicroNMEA - + - name: Install ESPAsyncWebServer uses: actions/checkout@v2 with: repository: bigbrodude6119/ESPAsyncWebServer ref: master path: CustomESPAsyncWebServer - + - name: Install TFT_eSPI uses: actions/checkout@v2 with: @@ -112,25 +112,25 @@ jobs: # repository: justcallmekoko/SwitchLib # ref: main # path: CustomSwitchLib - + - name: Install LinkedList uses: actions/checkout@v2 with: repository: ivanseidel/LinkedList ref: v1.3.3 path: CustomLinkedList - + - name: Install EspSoftwareSerial uses: actions/checkout@v2 with: repository: plerup/espsoftwareserial ref: 8.1.0 path: CustomEspSoftwareSerial - + #- name: Search for SD lib in arduino-esp32 v2.0.4 # run: | # find /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.4arduino-esp32 -name "SD" - + - name: Configure TFT_eSPI run: | rm -f CustomTFT_eSPI/User_Setup_Select.h @@ -142,31 +142,31 @@ jobs: pwd ls -la ls -la CustomTFT_eSPI - + #- name: Place 2.0.10 for use # run: | # mkdir -p /home/runner/.arduino15/packages/esp32/hardware/esp32/ # cp -R /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.3 /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.3 # ls -la /home/runner/.arduino15/packages/esp32/hardware/esp32/ # echo Whoever made me have to do this can fuck off - + #- name: Replace arduino-esp32 v2.0.10 that was gloriously forced on us # run: | # rm -rf /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.10 # cp -R /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.3 /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.3 # ls -la /home/runner/.arduino15/packages/esp32/hardware/esp32/ # echo Whoever made me have to do this can fuck off - + #- name: Search for SD lib in arduino-esp32 # run: | # find /home/runner/ -name "SD" - + #- name: Replace SD lib # run: | # rm -rf /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.10/libraries/SD # cp -R /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.4arduino-esp32/libraries/SD /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.10/libraries/SD # ls -la /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.10/libraries/SD - + - name: Modify platform.txt run: | echo "Chicken" @@ -180,7 +180,7 @@ jobs: cat "$i" | grep compiler.c.elf.libs.esp32s2 cat "$i" | grep compiler.c.elf.libs.esp32 done - + - name: Configure configs.h for Flipper Zero WiFi Dev Board run: | sed -i 's/^ #define MARAUDER_REV_FEATHER/ \/\/#define MARAUDER_REV_FEATHER/' esp32_marauder/configs.h @@ -194,29 +194,29 @@ jobs: sed -i 's/^ \/\/#define MARAUDER_FLIPPER/ #define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + - name: Build Marauder for Flipper Zero WiFi Dev Board uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder Flipper bin run: | mv ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin - + - name: Build Marauder for Flipper Zero Multi Board uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:esp32s3:PartitionScheme=min_spiffs,FlashSize=8M,PSRAM=enabled extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder Multi Board bin run: | mv ./esp32_marauder/build/esp32.esp32.esp32s3/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s3/esp32_marauder.multiboardS3.bin - + - name: Configure TFT_eSPI and configs.h for OG Marauder run: | pwd @@ -234,18 +234,18 @@ jobs: sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + - name: Build Marauder for OG Marauder uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename OG Marauder bin run: | mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.og.bin - + - name: Configure TFT_eSPI and configs.h for Marauder v6 run: | sed -i 's/^#include /\/\/#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h @@ -261,7 +261,7 @@ jobs: sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + #- name: Build Marauder for v6 Marauder with arduino/compile-sketches # uses: arduino/compile-sketches@v1 # with: @@ -270,26 +270,26 @@ jobs: # - --warnings="none" # - --export-binaries # fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs - + #- name: Show compiled arduino/compile-sketches v6 bin # run: | # find ~ -name "esp32_marauder.ino.bin" - + #- name: Rename v6_2 Marauder bin # run: | # mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6_2.bin - + - name: Build Marauder for v6 Marauder uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename v6 Marauder bin run: | mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6.bin - + - name: Configure TFT_eSPI and configs.h for Marauder v6.1 run: | sed -i 's/^ #define MARAUDER_REV_FEATHER/ \/\/#define MARAUDER_REV_FEATHER/' esp32_marauder/configs.h @@ -302,18 +302,18 @@ jobs: sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + - name: Build Marauder for v6.1 Marauder uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename v6 Marauder bin run: | mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6_1.bin - + - name: Configure TFT_eSPI and configs.h for Marauder Kit run: | sed -i 's/^#include /\/\/#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h @@ -328,18 +328,18 @@ jobs: sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + - name: Build Marauder for Marauder Kit uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder Kit bin run: | mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.kit.bin - + - name: Configure TFT_eSPI and configs.h for Marauder Mini run: | sed -i 's/^\/\/#include /#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h @@ -354,18 +354,18 @@ jobs: sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + - name: Build Marauder for Marauder Mini uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder Mini bin run: | mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin - + - name: Configure TFT_eSPI and configs.h for ESP32 LDDB run: | sed -i 's/^ #define MARAUDER_REV_FEATHER/ \/\/#define MARAUDER_REV_FEATHER/' esp32_marauder/configs.h @@ -378,14 +378,14 @@ jobs: sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ \/\/#define ESP32_LDDB/ #define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + - name: Build Marauder for ESP32 LDDB uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder ESP32 LDDB bin run: | mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.esp32_lddb.bin @@ -402,18 +402,18 @@ jobs: sed -i 's/^ #define MARAUDER_FLIPPER/ \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ \/\/#define MARAUDER_DEV_BOARD_PRO/ #define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h - + - name: Build Marauder for Marauder Dev Board Pro uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder for Marauder Dev Board Pro run: | mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_dev_board_pro.bin - + - name: Configure TFT_eSPI and configs.h for Marauder M5StickC run: | pwd @@ -431,18 +431,18 @@ jobs: sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h sed -i 's/^ \/\/#define MARAUDER_M5STICKC/ #define MARAUDER_M5STICKC/' esp32_marauder/configs.h - + - name: Build Marauder for Marauder M5StickC uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:m5stick-c:PartitionScheme=min_spiffs extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder M5StickC bin run: | mv ./esp32_marauder/build/esp32.esp32.m5stick-c/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.m5stick-c/esp32_marauder.m5stickc_plus.bin - + - name: Configure TFT_eSPI and configs.h for Marauder Rev Feather run: | pwd @@ -461,14 +461,14 @@ jobs: sed -i 's/^ #define ESP32_LDDB/ \/\/#define ESP32_LDDB/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_DEV_BOARD_PRO/ \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h sed -i 's/^ #define MARAUDER_M5STICKC/ \/\/#define MARAUDER_M5STICKC/' esp32_marauder/configs.h - + - name: Build Marauder for Marauder Rev Feather uses: ArminJo/arduino-test-compile@v3.2.1 with: sketch-names: esp32_marauder.ino arduino-board-fqbn: esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled extra-arduino-cli-args: "--warnings none" - + - name: Rename Marauder Marauder Rev Feather run: | mv ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.rev_feather.bin @@ -476,84 +476,84 @@ jobs: - name: Display finished bins run: | find ./esp32_marauder/build -name "*.bin" - - - name: 'Upload Flipper Artifact' + + - name: "Upload Flipper Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.flipper.bin path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin retention-days: 5 - - - name: 'Upload MultiboardS3 Artifact' + + - name: "Upload MultiboardS3 Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.multiboardS3.bin path: ./esp32_marauder/build/esp32.esp32.esp32s3/esp32_marauder.multiboardS3.bin retention-days: 5 - - - name: 'Upload OG Artifact' + + - name: "Upload OG Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.og.bin path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.og.bin retention-days: 5 - - - name: 'Upload v6 Artifact' + + - name: "Upload v6 Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.v6.bin path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6.bin retention-days: 5 - - - name: 'Upload v6_1 Artifact' + + - name: "Upload v6_1 Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.v6_1.bin path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6_1.bin retention-days: 5 - - - name: 'Upload Kit Artifact' + + - name: "Upload Kit Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.kit.bin path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.kit.bin retention-days: 5 - - - name: 'Upload Mini Artifact' + + - name: "Upload Mini Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.mini.bin path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin retention-days: 5 - - - name: 'Upload ESP32 LDDB Artifact' + + - name: "Upload ESP32 LDDB Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.mini.bin path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.esp32_lddb.bin retention-days: 5 - - - name: 'Upload Marauder Dev Board Pro Artifact' + + - name: "Upload Marauder Dev Board Pro Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.marauder_dev_board_pro.bin path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_dev_board_pro.bin retention-days: 5 - - - name: 'Upload Marauder M5StickC Plus Artifact' + + - name: "Upload Marauder M5StickC Plus Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.m5stickc_plus.bin path: ./esp32_marauder/build/esp32.esp32.m5stick-c/esp32_marauder.m5stickc_plus.bin retention-days: 5 - - - name: 'Upload Rev Feather Artifact' + + - name: "Upload Rev Feather Artifact" uses: actions/upload-artifact@v3 with: name: esp32_marauder.rev_feather.bin path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.rev_feather.bin retention-days: 5 - + - name: Create Release id: create_release uses: actions/create-release@v1 @@ -565,9 +565,9 @@ jobs: draft: true prerelease: false if: github.event_name != 'pull_request' - + - name: Upload Flipper Asset - id: upload-flipper-release-asset + id: upload-flipper-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -577,9 +577,9 @@ jobs: asset_name: esp32_marauder.flipper.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload MultiboardS3 Asset - id: upload-multiboardS3-release-asset + id: upload-multiboardS3-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -589,9 +589,9 @@ jobs: asset_name: esp32_marauder.multiboardS3.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload OG Asset - id: upload-og-release-asset + id: upload-og-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -601,9 +601,9 @@ jobs: asset_name: esp32_marauder.og.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload v6 Asset - id: upload-v6-release-asset + id: upload-v6-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -613,9 +613,9 @@ jobs: asset_name: esp32_marauder.v6.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload v6_1 Asset - id: upload-v6-1-release-asset + id: upload-v6-1-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -625,9 +625,9 @@ jobs: asset_name: esp32_marauder.v6_1.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload Kit Asset - id: upload-kit-release-asset + id: upload-kit-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -637,9 +637,9 @@ jobs: asset_name: esp32_marauder.kit.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload Mini Asset - id: upload-mini-release-asset + id: upload-mini-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -649,9 +649,9 @@ jobs: asset_name: esp32_marauder.mini.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload ESP32 LDDB Asset - id: upload-esp32-lddb-release-asset + id: upload-esp32-lddb-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -661,7 +661,7 @@ jobs: asset_name: esp32_marauder.esp32_lddb.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload Marauder Dev Board Pro Asset id: upload-marauder-dev-board-pro-release-asset uses: actions/upload-release-asset@v1 @@ -673,9 +673,9 @@ jobs: asset_name: esp32_marauder.marauder_dev_board_pro.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload Marauder M5StickC Plus Asset - id: upload-m5stickc-plus-release-asset + id: upload-m5stickc-plus-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} @@ -685,9 +685,9 @@ jobs: asset_name: esp32_marauder.m5stickc_plus.bin asset_content_type: application/bin if: github.event_name != 'pull_request' - + - name: Upload Rev Feather Asset - id: upload-rev-feather-release-asset + id: upload-rev-feather-release-asset uses: actions/upload-release-asset@v1 env: GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} From 3e9217daddc2477170d4dc9cf3555082edc3aff2 Mon Sep 17 00:00:00 2001 From: Guido Aguiar Date: Mon, 6 May 2024 11:21:32 -0300 Subject: [PATCH 4/4] chore: Configure TFT_eSPI and configs.h for Marauder M5Cardputer --- .github/workflows/build_push.yml | 31 +++++++++++++++++++++++++++++++ .gitmodules | 1 + 2 files changed, 32 insertions(+) diff --git a/.github/workflows/build_push.yml b/.github/workflows/build_push.yml index aca2edc59..3fd022e69 100644 --- a/.github/workflows/build_push.yml +++ b/.github/workflows/build_push.yml @@ -181,6 +181,30 @@ jobs: cat "$i" | grep compiler.c.elf.libs.esp32 done + - name: Configure TFT_eSPI and configs.h for Marauder M5Cardputer + run: | + # Configure TFT_eSPI + sed -i 's/^#include /\/\/#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h + sed -i 's/^\/\/#include /#include /' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h + + # Configure configs.h + sed -i 's/^ #define MARAUDER_REV_FEATHER/ \/\/#define MARAUDER_REV_FEATHER/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_MINI/ \/\/#define MARAUDER_MINI/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V4/ \/\/#define MARAUDER_V4/' esp32_marauder/configs.h + sed -i 's/^ #define MARAUDER_V6/ \/\/#define MARAUDER_V6/' esp32_marauder/configs.h + sed -i 's/^ \/\/#define MARAUDER_M5CARDPUTER/ #define MARAUDER_M5CARDPUTER/' esp32_marauder/configs.h + + - name: Build Marauder for M5Cardputer + uses: ArminJo/arduino-test-compile@v3.2.1 + with: + sketch-names: esp32_marauder.ino + arduino-board-fqbn: esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled + extra-arduino-cli-args: "--warnings none" + + - name: Rename Marauder M5Cardputer bin + run: | + mv ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.m5cardputer.bin + - name: Configure configs.h for Flipper Zero WiFi Dev Board run: | sed -i 's/^ #define MARAUDER_REV_FEATHER/ \/\/#define MARAUDER_REV_FEATHER/' esp32_marauder/configs.h @@ -554,6 +578,13 @@ jobs: path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.rev_feather.bin retention-days: 5 + - name: "Upload M5Cardputer Artifact" + uses: actions/upload-artifact@v3 + with: + name: esp32_marauder.m5cardputer.bin + path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.m5cardputer.bin + retention-days: 5 + - name: Create Release id: create_release uses: actions/create-release@v1 diff --git a/.gitmodules b/.gitmodules index 729d62826..c1f5d6b59 100644 --- a/.gitmodules +++ b/.gitmodules @@ -7,6 +7,7 @@ [submodule "esp32_marauder/libraries/TFT_eSPI"] path = esp32_marauder/libraries/TFT_eSPI url = https://github.com/justcallmekoko/TFT_eSPI.git + # url = https://github.com/Bodmer/TFT_eSPI.git [submodule "esp32_marauder/libraries/JPEGDecoder"] path = esp32_marauder/libraries/JPEGDecoder url = https://github.com/Bodmer/JPEGDecoder.git