Skip to content

Latest commit

 

History

History
77 lines (55 loc) · 4.43 KB

RELEASENOTES.md

File metadata and controls

77 lines (55 loc) · 4.43 KB
Raw

Logo

RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14
  4. Migrate to Sonoff-Tasmota 6.x
  5. Migrate to Tasmota 7.x

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.1
  2. Migrate to Tasmota 8.x

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v8.1.0 Doris the Settings are re-allocated in such a way that fallback is only allowed and possible to release v7.2.0 Constance. Once at v7.2.0 you're on your own when downgrading even further.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.6.3 + e64cb61 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Although it might still compile on previous Core versions all support will be removed in the near future.

Support of TLS

To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.6.3 + e64cb61.

  • tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
  • tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
  • tasmota-lite.bin = The Lite version without most drivers and sensors.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors.
  • tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
  • tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

List of embedded modules.

Complete list of available feature and sensors.

Changelog

Version 8.2.0.3

  • Change HM-10 sensor type detection and add features (#7962)
  • Change light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034)
  • Change remove floating point libs from IRAM
  • Change remove MQTT Info messages on restart for DeepSleep Wake (#8044)
  • Fix possible Relay toggle on (OTA) restart
  • Fix Zigbee sending wrong Sat value with Hue emulation
  • Add Zigbee command ZbRestore to restore device configuration dumped with ZbStatus 2
  • Add Zigbee command ZbUnbind
  • Add Zigbee command ZbBindState and manufattribute
  • Add commands CounterDebounceLow and CounterDebounceHigh to control debouncing (#8021)
  • Add command SetOption41 <x> to force sending gratuitous ARP every seconds
  • Add command SetOption90 1 to disable non-json MQTT messages (#8044)
  • Add command SetOption91 1 to enable fading at startup / power on
  • Add command Sensor10 0/1/2 to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
  • Add command Sensor10 31..254 to control BH1750 measurement time which defaults to 69 (#8016)
  • Add support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa
  • Add support for 64x48 SSD1306 OLED (#6740)
  • Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014)
  • Add console command history (#7483, #8015)
  • Add support for longer template names
  • Add quick wifi reconnect using saved AP parameters when SetOption56 0 (#3189)