Jambox on the Raspberry PI 400

[Princeours]

Hello

Can i install Jambox on the Raspberry PI 400 ?
Thank you

[kdoren]

@Princeours I don't own a 400, but it was reported to work if the vc4-fkms-v3d driver is enabled (I have this disabled by default except on Pi400).

There is a section in /boot/config.txt that should automatically enable this when booting on pi400, so you shouldn't need to do anything special.

[pi400]
# Support 2 HDMI monitors for Pi4 and Pi400.
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
[all]

Please report back your results.

[Princeours]

Thank you very much for your response 😊 Ok for all ... Le lun. 30 mai 2022 à 19:55, Kevin Doren ***@***.***> a écrit :

…

@Princeours <https://github.com/Princeours> I don't own a 400, but it was reported to work if the vc4-fkms-v3d driver is enabled (I have this disabled by default except on Pi400). There is a section in /boot/config.txt that should automatically enable this when booting on pi400, so you shouldn't need to do anything special. [pi400] # Support 2 HDMI monitors for Pi4 and Pi400. dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] Please report back your results. — Reply to this email directly, view it on GitHub <#134 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AZMX3LMLKJMAJE65SKAYVBLVMT6HNANCNFSM5XKG4NQA> . You are receiving this because you were mentioned.Message ID: ***@***.***>