defines.h

/****************************************************************************************************************************
  defines.h
  For ESP32 using WiFi along with BlueTooth BLE
  
  BlynkESP32_BT_WF is a library for inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. 
  Then select either one or both at runtime.
  
  Based on and modified from Blynk library v0.6.1 https://github.com/blynkkk/blynk-library/releases
  Built by Khoi Hoang https://github.com/khoih-prog/BlynkESP32_BT_WF
  Licensed under MIT license
 *****************************************************************************************************************************/

#ifndef defines_h
#define defines_h

#ifndef ESP32
  #error This code is intended to run on the ESP32 platform! Please check your Tools->Board setting.
#endif

#define BLYNK_PRINT                   Serial

#define ESP32_BLE_WF_DEBUG            true

#define DOUBLERESETDETECTOR_DEBUG     true
#define BLYNK_WM_DEBUG                1

// Not use #define USE_LITTLEFS and #define USE_SPIFFS  => using SPIFFS for configuration data in WiFiManager
// (USE_LITTLEFS == false) and (USE_SPIFFS == false)    => using EEPROM for configuration data in WiFiManager
// (USE_LITTLEFS == true) and (USE_SPIFFS == false)     => using LITTLEFS for configuration data in WiFiManager
// (USE_LITTLEFS == true) and (USE_SPIFFS == true)      => using LITTLEFS for configuration data in WiFiManager
// (USE_LITTLEFS == false) and (USE_SPIFFS == true)     => using SPIFFS for configuration data in WiFiManager
// Those above #define's must be placed before #include <BlynkSimpleEsp32_WFM.h>

#define USE_LITTLEFS          true
#define USE_SPIFFS            false


#if !( USE_SPIFFS || USE_LITTLEFS)
  // EEPROM_SIZE must be <= 2048 and >= CONFIG_DATA_SIZE (currently 172 bytes)
  #define EEPROM_SIZE    (2 * 1024)
  // EEPROM_START + CONFIG_DATA_SIZE must be <= EEPROM_SIZE
  #define EEPROM_START   0
#endif

/////////////////////////////////////////////

// Add customs headers from v1.2.0
#define USING_CUSTOMS_STYLE                 true
#define USING_CUSTOMS_HEAD_ELEMENT          true
#define USING_CORS_FEATURE                  true

/////////////////////////////////////////////

// Force some params in Blynk, only valid for library version 1.0.1 and later
#define TIMEOUT_RECONNECT_WIFI                    10000L
#define RESET_IF_CONFIG_TIMEOUT                   true
#define CONFIG_TIMEOUT_RETRYTIMES_BEFORE_RESET    5

// Those above #define's must be placed before #include <BlynkSimpleESP32_WFM.h>

//#define BLYNK_USE_BLE_ONLY      true
#define BLYNK_USE_BLE_ONLY      false

#include <BlynkSimpleEsp32_BLE_WF.h>
#include <BLEDevice.h>
#include <BLEServer.h>

#define USE_BLYNK_WM          true
//#define USE_BLYNK_WM          false

#if !BLYNK_USE_BLE_ONLY
  #if USE_BLYNK_WM
    #define USE_DYNAMIC_PARAMETERS                    true

    /////////////////////////////////////////////

    #define REQUIRE_ONE_SET_SSID_PW             false
    
    #define SCAN_WIFI_NETWORKS                  true
    
    // To be able to manually input SSID, not from a scanned SSID lists
    #define MANUAL_SSID_INPUT_ALLOWED           true
    
    // From 2-15
    #define MAX_SSID_IN_LIST                    8
    
    /////////////////////////////////////////////
    
    #warning Please select 1.3MB+ for APP (Minimal SPIFFS (1.9MB APP, OTA), HugeAPP(3MB APP, NoOTA) or NoOA(2MB APP)
    #include <BlynkSimpleEsp32_WFM.h>  
  #else
    #include <BlynkSimpleEsp32_WF.h>
    
    String cloudBlynkServer = "account.duckdns.org";
    //String cloudBlynkServer = "192.168.2.110";
    #define BLYNK_SERVER_HARDWARE_PORT    8080
    char ssid[] = "SSID";
    char pass[] = "PASS";
  #endif
#endif

#if (BLYNK_USE_BLE_ONLY || !USE_BLYNK_WM)
  // Blynk token shared between BLE and WiFi
  char auth[] = "****";
#endif

#ifndef LED_BUILTIN
  #define LED_BUILTIN       2         // Pin D2 mapped to pin GPIO2/ADC12 of ESP32, control on-board LED
#endif

#define HOST_NAME   "ESP32-BLE-WF"

#endif      //defines_h