gc3355-commands.h

/* commands for single LTC mode */
static const unsigned char *single_cmd_init[] = {
	/* reset gcp */
	(unsigned char[]) {0x10, 0x55, 0xaa, 0xc0, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00},
	/* set # of chips to 5 */
	(unsigned char[]) {0x10, 0x55, 0xaa, 0xc0, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0x05, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00},
	/* disable btc cores */
	(unsigned char[]) {0x18, 0x55, 0xaa, 0xef, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
	/* enable ltc */
	(unsigned char[]) {0x08, 0x55, 0xaa, 0xef, 0x30, 0x20, 0x00, 0x00, 0x00},
	NULL
};

static const unsigned char *single_cmd_reset[] = {
	/* reset ltc report + calculation unit */
	(unsigned char[]) {0x08, 0x55, 0xaa, 0x1f, 0x28, 0x14, 0x00, 0x00, 0x00},
	/* reset ltc */
	(unsigned char[]) {0x10, 0x55, 0xaa, 0xc0, 0x00, 0xe0, 0xe0, 0xe0, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00},
	/* clear reset */
	(unsigned char[]) {0x08, 0x55, 0xaa, 0x1f, 0x28, 0x17, 0x00, 0x00, 0x00},
	NULL
};

static const unsigned char *firmware_request_cmd[] = {
	(unsigned char[]) {0x10, 0x55, 0xaa, 0xc0, 0x00, 0x90, 0x90, 0x90, 0x90, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00},
	NULL
};