MQTT connection

[sico33]

Hello, I wanted to know if there is any way to connect the glow through mqtt?

Thanks

[klaasnicolaas]

Why would you want to do that?

[sico33]

Por que quiero conectar un esphome a HA sobre internet en un medidor remoto

[sico33]

I managed to connect it through MQTT to the broker, but I don't know how to disable the Api

19:56:14	[I]	[ota:109]	Boot seems successful, resetting boot loop counter.
19:57:58	[D]	[sensor:126]	'House - WiFi Signal': Sending state -60.00000 dBm with 0 decimals of accuracy
19:59:58	[D]	[sensor:126]	'House - WiFi Signal': Sending state -66.00000 dBm with 0 decimals of accuracy
20:01:22	[E]	[api:127]	No client connected to API. Rebooting...
20:03:03	[D]	[sensor:126]	'House - WiFi Signal': Sending state -64.00000 dBm with 0 decimals of accuracy
20:05:03	[D]	[sensor:126]	'House - WiFi Signal': Sending state -62.00000 dBm with 0 decimals of accuracy
20:07:03	[D]	[sensor:126]	'House - WiFi Signal': Sending state -55.00000 dBm with 0 decimals of accuracy
20:09:03	[D]	[sensor:126]	'House - WiFi Signal': Sending state -65.00000 dBm with 0 decimals of accuracy
20:11:03	[D]	[sensor:126]	'House - WiFi Signal': Sending state -62.00000 dBm with 0 decimals of accuracy
20:11:22	[I]	[ota:109]	Boot seems successful, resetting boot loop counter.
20:13:03	[D]	[sensor:126]	'House - WiFi Signal': Sending state -64.00000 dBm with 0 decimals of accuracy
20:15:03	[D]	[sensor:126]	'House - WiFi Signal': Sending state -62.00000 dBm with 0 decimals of accuracy
20:16:30	[E]	[api:127]	No client connected to API. Rebooting...

[sico33]

INFO Reading configuration /config/esphome/lachota.yaml...
Failed config

dashboard_import: [source /config/esphome/lachota.yaml:23]

Component dashboard_import requires component api.
package_import_url: github://klaasnicolaas/home-assistant-glow/home_assistant_glow.yaml
time.homeassistant: [source /config/esphome/lachota.yaml:189]

Component time.homeassistant requires component api.
platform: homeassistant
id: homeassistant_time

[sico33]

Hello [klaasnicolaas], is there any way to read the Irda?

https://www.sumilec.com/wp-content/uploads/2018/07/elster4.jpg

[klaasnicolaas]

Yes, it should have a pulse LED on it and above that is your pulse rate.