-
Notifications
You must be signed in to change notification settings - Fork 11
Is "hyp2mat" simulation tested on Octave? #12
Comments
OK.
In addition to:
addpath('D:/openEMS/matlab');
also do:
addpath('D:/openEMS/hyp2mat/matlab'); % hyp2mat package
Does this solve the problem?
koen
…On Nov 16, 2017, at 12:30 PM, prabhakarkr ***@***.***> wrote:
Hi,
I have tried fullfilling all the recommendation on web to simulate "hyp2mat" tutorial.
However, I am not able to proceed with the following command
CSX = ImportHyperLynx(CSX, 'msl.HYP');
error: 'ImportHyperLynx' undefined near line 1 column 7
I am using Octave 4.2.1 with openEMS 64 bit Windows. pls help
Thanks
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or mute the thread.
|
Maybe you have to add D:/openEMS/hyp2mat/ to your PATH too, to find hyp2mat.exe
koen
…On Nov 16, 2017, at 12:30 PM, prabhakarkr ***@***.***> wrote:
Hi,
I have tried fullfilling all the recommendation on web to simulate "hyp2mat" tutorial.
However, I am not able to proceed with the following command
CSX = ImportHyperLynx(CSX, 'msl.HYP');
error: 'ImportHyperLynx' undefined near line 1 column 7
I am using Octave 4.2.1 with openEMS 64 bit Windows. pls help
Thanks
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or mute the thread.
|
I have added those pathss. I have added "C:\openEMS\hyp2mat" to my system path aswell (may installation directories for both opemEMS and octave is "C:") Thanks |
What if in octave you do a "cd openEMS/hyp2mat/eagle/tutorial" first?
…On Nov 17, 2017, at 6:10 AM, prabhakarkr ***@***.***> wrote:
I have added those pathss. I have added "C:\openEMS\hyp2mat" to my system path aswell (may installation directories for both opemEMS and octave is "C:")
Now the erro is-
command: "c:/openEMS/hyp2mat/matlab..\hyp2mat.exe" --verbose --output-format csxcad --output pcb.m "msl.HYP"
Can't open input file msl.HYP
error: error executing "c:/openEMS/hyp2mat/matlab..\hyp2mat.exe" --verbose --output-format csxcad --output pcb.m "msl.HYP"
error: called from
ImportHyperLynx at line 190 column 5
Thanks
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread.
|
Hello Koen,
Thanks a lot for the support so far! I am able to use openEMS on Octave.
However, with respect to openEMS tutorial-
http://openems.de/index.php/Tutorial:_Importing_with_hyp2mat
I guess there are still a few dependencies I may need to overcome (attached warnings and error screen-shot).
I have installed “ParaView 5.4.1-822-g597adef”
Pls help
Regards
Prabhakar Kumar
ON Semiconductor Tech Ind Pvt Ltd
RF ConnectivityTeam
From: Koen De Vleeschauwer [mailto:[email protected]]
Sent: Friday, November 17, 2017 4:36 PM
To: koendv/hyp2mat
Cc: Prabhakar Kumar; Author
Subject: Re: [koendv/hyp2mat] Is "hyp2mat" simulation tested on Octave? (#12)
What if in octave you do a "cd openEMS/hyp2mat/eagle/tutorial" first?
On Nov 17, 2017, at 6:10 AM, prabhakarkr ***@***.******@***.***>> wrote:
I have added those pathss. I have added "C:\openEMS\hyp2mat" to my system path aswell (may installation directories for both opemEMS and octave is "C:")
Now the erro is-
command: "c:/openEMS/hyp2mat/matlab..\hyp2mat.exe" --verbose --output-format csxcad --output pcb.m "msl.HYP"
Can't open input file msl.HYP
error: error executing "c:/openEMS/hyp2mat/matlab..\hyp2mat.exe" --verbose --output-format csxcad --output pcb.m "msl.HYP"
error: called from
ImportHyperLynx at line 190 column 5
Thanks
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_koendv_hyp2mat_issues_12-23issuecomment-2D345214631&d=DwMFaQ&c=MHZppzMdXMt3JYjCV71UsQ&r=Da5MddG9FUvcRZ_gRAsPulcPua3PjQ09RCFiOIse-oQ&m=DmyjhRLlcycShgDC2M5CESA7tQVmiJMByjUUngZ282Y&s=vsyH8nmNHIVje4ce1fha3BIxCeq4eSeBnwMFKrE8svs&e=>, or mute the thread<https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_notifications_unsubscribe-2Dauth_ANpMpYI-2DbIN9D-5FitVZrcYbmwVgDoZsZeks5s3WiPgaJpZM4QgWUF&d=DwMFaQ&c=MHZppzMdXMt3JYjCV71UsQ&r=Da5MddG9FUvcRZ_gRAsPulcPua3PjQ09RCFiOIse-oQ&m=DmyjhRLlcycShgDC2M5CESA7tQVmiJMByjUUngZ282Y&s=rQ2F9oqN6mD2EvBylvWcGxBS5D8uLl3o466NDEpxn60&e=>.
|
Hi, I am done till- However once I run the above command, I get "warning: division by zero" Should I edit the hyperlynx file given in tutorial along with openEMS (my boards output seems defferent than swoen on web) or generate a fresh hypelynx file. I am using Altium Designer currently. Thanks |
Could you show the hyperlynx file?
koen
…On Nov 22, 2017, at 4:40 AM, prabhakarkr ***@***.***> wrote:
Hi,
I am done till-
mesh = SmoothMesh(mesh, resolution);
However once I run the above command, I get "warning: division by zero"
Should I edit the hyperlynx file given in tutorial along with openEMS (my boards output seems defferent than swoen on web) or generate a fresh hypelynx file. I am using Altium Designer currently.
Thanks
screen-shot1.docx
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread.
|
Hi Koen,
Pls find attached the hyperlynx file. It’s the same what is supplied along with openEMS\hyp2mat\eagle\tutorial
I am getting the following after running -
> CSX = ImportHyperLynx(CSX, 'msl.HYP');
command: "C:/openEMS/hyp2mat/matlab\..\hyp2mat.exe" --verbose --output-format csxcad --output pcb.m "msl.HYP"
board size:
x = 0.00 : 20.00 mm
y = 0.00 : 20.00 mm
z = 0.00 : 1.84 mm
layers:
signal 35.56 um eps_r 1.00 'Top'
dielectric 0.32 mm eps_r 4.80 'DL01'
signal 35.56 um eps_r 4.80 'Bottom'
dielectric 1.52 mm eps_r 4.80 'DL02'
However, in the tutorial page-
http://openems.de/index.php/Tutorial:_Importing_with_hyp2mat
it outputs as-
loading msl.HYP
copper: Top = 35.56 um
copper: Bottom = 35.56 um
epsilonr = 4.8
board: x = 0 : 20 mm
y = 0 : 20 mm
z = 0 : 1.8717 mm
Thanks
From: Koen De Vleeschauwer [mailto:[email protected]]
Sent: Wednesday, November 22, 2017 12:46 PM
To: koendv/hyp2mat
Cc: Prabhakar Kumar; Author
Subject: Re: [koendv/hyp2mat] Is "hyp2mat" simulation tested on Octave? (#12)
Could you show the hyperlynx file?
koen
On Nov 22, 2017, at 4:40 AM, prabhakarkr ***@***.******@***.***>> wrote:
Hi,
I am done till-
mesh = SmoothMesh(mesh, resolution);
However once I run the above command, I get "warning: division by zero"
Should I edit the hyperlynx file given in tutorial along with openEMS (my boards output seems defferent than swoen on web) or generate a fresh hypelynx file. I am using Altium Designer currently.
Thanks
screen-shot1.docx
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_koendv_hyp2mat_issues_12-23issuecomment-2D346263488&d=DwMFaQ&c=MHZppzMdXMt3JYjCV71UsQ&r=Da5MddG9FUvcRZ_gRAsPulcPua3PjQ09RCFiOIse-oQ&m=saTePvSTX6lCpumYfkcy5YqGPenQQT9Ov50V9NNV-JQ&s=jWaGnJV_Cu4XoZLj4Hj8d6ogbtNeDgeMOX06fg206h0&e=>, or mute the thread<https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_notifications_unsubscribe-2Dauth_ANpMpWUkAHlJkTvAb95Am-2DSVcqeCiXdGks5s48pFgaJpZM4QgWUF&d=DwMFaQ&c=MHZppzMdXMt3JYjCV71UsQ&r=Da5MddG9FUvcRZ_gRAsPulcPua3PjQ09RCFiOIse-oQ&m=saTePvSTX6lCpumYfkcy5YqGPenQQT9Ov50V9NNV-JQ&s=rcBzcymdKf1BvsljSb_NDocnTBSoYT73n8M-Rd4KE3E&e=>.
|
Hi,
I have tried fullfilling all the recommendation on web to simulate "hyp2mat" tutorial.
However, I am not able to proceed with the following command
I am using Octave 4.2.1 with openEMS 64 bit Windows. pls help
Thanks
The text was updated successfully, but these errors were encountered: