.. seo::
:description: Changelog for ESPHome 2023.10.0.
:image: /_static/changelog-2023.10.0.png
:author: Jesse Hills
:author_twitter: @jesserockz
.. imgtable::
:columns: 3
MMC5983, components/sensor/mmc5983, mmc5983.jpg
This release is quite small as myself (:ghuser:`jesserockz`) and :ghuser:`kbx81` have been focusing
on voice_assistant updates and preparations for the Year of the Voice - Chapter 4.
Check out the stream replay here:
A new xor condition has been added to the automation engine. This condition will only be true
when a single condition in the list is true.
- Fix voice_assistant without a speaker :esphomepr:`5558` by :ghuser:`jesserockz`
- esp32_improv add timeout :esphomepr:`5556` by :ghuser:`jesserockz`
- Create IPv4 sockets if ipv6 is not enabled :esphomepr:`5565` by :ghuser:`jesserockz`
- Incorrect ESP32 Strapping PIN Defined :esphomepr:`5563` by :ghuser:`descipher`
- Fix XOR condition :esphomepr:`5567` by :ghuser:`jesserockz`
- Improv Serial support via USB CDC and JTAG :esphomepr:`5559` by :ghuser:`kbx81`
- Publish the pulse_meter total when setting the total :esphomepr:`5475` by :ghuser:`TrentHouliston`
- Remove explicit cast for IPAddress :esphomepr:`5574` by :ghuser:`HeMan`
- Set addr type when copy from ip4_addr_t :esphomepr:`5583` by :ghuser:`HeMan`
- fix canbus send config :esphomepr:`5585` by :ghuser:`ssieb`
- Allow set climate preset to NONE :esphomepr:`5588` by :ghuser:`dentra`
- Set IP address type only when IPv4 and IPv6 are both enabled :esphomepr:`5595` by :ghuser:`kbx81`
- Update current_based_cover bugfix :esphomepr:`5587` by :ghuser:`rogerbusser`
- Fixes ip include on arduino 2.7.4 :esphomepr:`5620` by :ghuser:`HeMan`
- Fix bug when requesting italic gfonts :esphomepr:`5623` by :ghuser:`dewet22`
- Handle enum type in tuya text_sensor :esphomepr:`5626` by :ghuser:`jesserockz`
- Add connection triggers to api :esphomepr:`5628` by :ghuser:`jesserockz`
- Add on_client_connected and disconnected to voice assistant :esphomepr:`5629` by :ghuser:`jesserockz`
- Ensure that all uses of strncpy in wifi component are safe. :esphomepr:`5636` by :ghuser:`kpfleming`
- Remove some explicit IPAddress casts :esphomepr:`5639` by :ghuser:`HeMan`
- Revert "Ensure that all uses of strncpy in wifi component are safe." :esphomepr:`5662` by :ghuser:`jesserockz`
The SHT3x had a heater_enabled config option added in the 2023.9.0 release with a default value of true.
This has been flipped this release to be false as it started causing issues with various sensors.
The SPS30 number concentration sensors had their units fixed to be #/cm³ instead of #/m³.
- Implement sensor component for MMC5983 :esphomepr:`5361` by :ghuser:`agoode` (new-integration)
- Do not enable SHT3x heater by default. Fixes #4886. :esphomepr:`5445` by :ghuser:`jkl1337` (breaking-change)
- Fix units for SPS30 number concentration sensors :esphomepr:`5452` by :ghuser:`kahrendt` (breaking-change)
- Update htu21d.cpp, fix publishing of heater level :esphomepr:`5520` by :ghuser:`Nippey`
- BD5758D - Add delays and ACKs :esphomepr:`5524` by :ghuser:`Cossid`
- Update Improv BLE component :esphomepr:`5518` by :ghuser:`jesserockz`
- SM10BIT_BASE - Add delays and ACKs, clear all channels before sleeping. :esphomepr:`5526` by :ghuser:`Cossid`
- BP1658CJ - Clear all channels before sleeping. :esphomepr:`5525` by :ghuser:`Cossid`
- Prometheus fix for esp-idf and fix newlines :esphomepr:`5536` by :ghuser:`jesserockz`
- Make IPAddress's operator!= compare values, not memory addresses. :esphomepr:`5537` by :ghuser:`raineth`
- Add change i2c address and allow multi conf for TB6612FNG :esphomepr:`5492` by :ghuser:`max246`
- Add stream start and end events :esphomepr:`5545` by :ghuser:`jesserockz`
- Fix esp32_improv authorizer with no binary sensors in config :esphomepr:`5546` by :ghuser:`jesserockz`
- More voice assistant fixes :esphomepr:`5547` by :ghuser:`jesserockz`
- Fix default libretiny manufacturer reported to HA :esphomepr:`5549` by :ghuser:`jesserockz`
- SML: fix incomplete sign extension for abbreviated transmissions :esphomepr:`5544` by :ghuser:`fblaese`
- esp32_improv advertise capabilities and state in ble service data :esphomepr:`5553` by :ghuser:`jesserockz`
- Add xor automation condition :esphomepr:`5453` by :ghuser:`kahrendt` (notable-change)
- SX1509 component :esphomepr:`5385` by :ghuser:`vr6racer`
- Ci find YAML tests dynamically :esphomepr:`5399` by :ghuser:`Fabian-Schmidt`
- Make ESPHome data dir configurable :esphomepr:`5417` by :ghuser:`werdnum`
- Bump actions/checkout from 4.0.0 to 4.1.0 :esphomepr:`5420` by :ghuser:`dependabot[bot]`
- Fix typo in documentation :esphomepr:`5425` by :ghuser:`kapily`
- Bump pylint from 2.17.5 to 2.17.6 :esphomepr:`5429` by :ghuser:`dependabot[bot]`
- Refactor ip address representation :esphomepr:`5252` by :ghuser:`HeMan`
- Fix .esphome path when not using envvar :esphomepr:`5440` by :ghuser:`jesserockz`
- [BP1658CJ] Missing clock line delays and ack bit :esphomepr:`5448` by :ghuser:`leoshusar`
- [ssd1351] fix: wait for the component to be at least in setup phase b… :esphomepr:`5454` by :ghuser:`xdecock`
- Do not enable SHT3x heater by default. Fixes #4886. :esphomepr:`5445` by :ghuser:`jkl1337` (breaking-change)
- Add testcases for multiple SPI buses on ESP32 Arduino :esphomepr:`5457` by :ghuser:`angelnu`
- Feat/component poller suspend :esphomepr:`5423` by :ghuser:`xdecock`
- Bump actions/setup-python from 4.7.0 to 4.7.1 :esphomepr:`5467` by :ghuser:`dependabot[bot]`
- Add xor automation condition :esphomepr:`5453` by :ghuser:`kahrendt` (notable-change)
- Fix units for SPS30 number concentration sensors :esphomepr:`5452` by :ghuser:`kahrendt` (breaking-change)
- ST7789v - Allow predefined backlight pin to be disabled. :esphomepr:`5476` by :ghuser:`clydebarrow`
- MAX7219 - Update intensity :esphomepr:`5477` by :ghuser:`clydebarrow`
- St7789v and SPI data rate :esphomepr:`5472` by :ghuser:`clydebarrow`
- Move CONF_IRQ_PIN into const.py :esphomepr:`5488` by :ghuser:`kbx81`
- Initial ESP32-H2 Support :esphomepr:`5498` by :ghuser:`vidplace7`
- Increased debug message precision :esphomepr:`5496` by :ghuser:`lukeansell`
- Support for Haier IR protocol added :esphomepr:`5403` by :ghuser:`paveldn`
- add USE_SPI define :esphomepr:`5500` by :ghuser:`angelnu`
- Implement sensor component for MMC5983 :esphomepr:`5361` by :ghuser:`agoode` (new-integration)
- Bump docker dependencies :esphomepr:`5501` by :ghuser:`jesserockz`
- Move to Pillow 10.x :esphomepr:`5489` by :ghuser:`hostcc`
- [Sprinkler] Initialize timers early to avoid crash :esphomepr:`5499` by :ghuser:`hostcc`
- Deep sleep is only available on esp32 and esp8266 :esphomepr:`5507` by :ghuser:`jesserockz`
- Use platform consts :esphomepr:`5508` by :ghuser:`jesserockz`
- Fixed precision for Nextion sensor with float values :esphomepr:`5497` by :ghuser:`olegtarasov`
- Remote wake word support for voice assistant :esphomepr:`5229` by :ghuser:`jesserockz`
- Don't allow entity category "CONFIG" for sensors :esphomepr:`5505` by :ghuser:`edenhaus`
- Prepare protobuf for ESP-IDF >= 5 :esphomepr:`5510` by :ghuser:`HeMan`
- fix build lang schema for spi and i2c :esphomepr:`5509` by :ghuser:`glmnet`
- Added Nextion display error handling during setup :esphomepr:`5493` by :ghuser:`olegtarasov`
- Fix e131 and voice_assistant sockets :esphomepr:`5502` by :ghuser:`justdaniel-gh`
- Allow manual set "Invert_display" :esphomepr:`5494` by :ghuser:`nielsnl68`
- As3935 calibration :esphomepr:`5366` by :ghuser:`mveinot`
- Small fixes for voice assistant :esphomepr:`5513` by :ghuser:`synesthesiam`
- Add detail param to allow listing of select options in WebServer REST API :esphomepr:`5503` by :ghuser:`DanielBaulig`
- Bump curl to 7.74.0-1.3+deb11u10 :esphomepr:`5517` by :ghuser:`jesserockz`
- Update htu21d.cpp, fix publishing of heater level :esphomepr:`5520` by :ghuser:`Nippey`
- BD5758D - Add delays and ACKs :esphomepr:`5524` by :ghuser:`Cossid`
- Update Improv BLE component :esphomepr:`5518` by :ghuser:`jesserockz`
- SM10BIT_BASE - Add delays and ACKs, clear all channels before sleeping. :esphomepr:`5526` by :ghuser:`Cossid`
- BP1658CJ - Clear all channels before sleeping. :esphomepr:`5525` by :ghuser:`Cossid`
- Prometheus fix for esp-idf and fix newlines :esphomepr:`5536` by :ghuser:`jesserockz`
- Make IPAddress's operator!= compare values, not memory addresses. :esphomepr:`5537` by :ghuser:`raineth`
- Add change i2c address and allow multi conf for TB6612FNG :esphomepr:`5492` by :ghuser:`max246`
- Add stream start and end events :esphomepr:`5545` by :ghuser:`jesserockz`
- Fix esp32_improv authorizer with no binary sensors in config :esphomepr:`5546` by :ghuser:`jesserockz`
- More voice assistant fixes :esphomepr:`5547` by :ghuser:`jesserockz`
- Fix default libretiny manufacturer reported to HA :esphomepr:`5549` by :ghuser:`jesserockz`
- SML: fix incomplete sign extension for abbreviated transmissions :esphomepr:`5544` by :ghuser:`fblaese`
- esp32_improv advertise capabilities and state in ble service data :esphomepr:`5553` by :ghuser:`jesserockz`
- :doc:`2023.9.0`
- :doc:`2023.8.0`
- :doc:`2023.7.0`
- :doc:`2023.6.0`
- :doc:`2023.5.0`
- :doc:`2023.4.0`
- :doc:`2023.3.0`
- :doc:`2023.2.0`
- :doc:`2022.12.0`
- :doc:`2022.11.0`
- :doc:`2022.10.0`
- :doc:`2022.9.0`
- :doc:`2022.8.0`
- :doc:`2022.6.0`
- :doc:`2022.5.0`
- :doc:`2022.4.0`
- :doc:`2022.3.0`
- :doc:`2022.2.0`
- :doc:`2022.1.0`
- :doc:`2021.12.0`
- :doc:`2021.11.0`
- :doc:`2021.10.0`
- :doc:`2021.9.0`
- :doc:`2021.8.0`
- :doc:`v1.20.0`
- :doc:`v1.19.0`
- :doc:`v1.18.0`
- :doc:`v1.17.0`
- :doc:`v1.16.0`
- :doc:`v1.15.0`
- :doc:`v1.14.0`
- :doc:`v1.13.0`
- :doc:`v1.12.0`
- :doc:`v1.11.0`
- :doc:`v1.10.0`
- :doc:`v1.9.0`
- :doc:`v1.8.0`
- :doc:`v1.7.0`